doogee dg2014 bricked - Android Q&A, Help & Troubleshooting

hello i just get a dg2014 used a good price..
i try to flash the patch for 1% battery issue, but i format the phone with sp flashtool and now i only get mtk usb port, not preloader..sp flashtool get red bar at 100% and nothing more..how can i flash the preloader or flash the phone without preloader, please i need help..i read the guide for mtk dfevices unbricking but no answer for this..
is any way or tool to flash the preloader..i mean the doogee manufacturer flash the preloader this way, so it has to have a solution, hep me please

Related

Flashtools not flash the rom

Hello I have an S4 mt6572 i9500 and android is dead and I'm trying to flash one rom pro phone via SP but does not exit zero.
I took out the battery put the usb recoloquei the battery but does not leave 0% SP recognizes the driver but nothing happens. Could someone help me?

[Q] help me unbrick my lenovo A319

hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
jamegreat said:
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
Click to expand...
Click to collapse
Just flash stock firmware with Sp-flashtools Download
1- Install mt65xx adb drivers
2- Connect your device to your pc
3- Load scatter file and click download in sp-flashtools
4- Remove battery then insert it again
Wait until it's done and turn in your phone (the first boot will be slow 2-5 min)
preloader
hi
i have same phone . lenovo a319 d ram fail error . please share ur backup or preloader with me:crying. please:crying:
Same here. I flashed with that ROM what was in 2 comments before, and now my phone is dead. Every time I've got this BROM error.

help me with tool to flash firmware lenovo a816 qcom msm8916

Hye,someone please help me where can i use the right tool to flash firmware lenovo a816 necause i alrrady use QFIL and now my phone just stuck on splash screen,and when connet to usb to pc there show to many patartAtion of internal memory..help me please..
Someone know about this..help me please..now my phone is dead..
I have same problem....anybody can teach us....thanks

Help to un brick Micromax A109

I bricked my phone and it is not getting started. I have tried all the possible way explained in different forums but no luck. I have downloaded the stock rom and tried to flash using YGP tool. But my device is not getting detected by windows properly. It will get connected for a 2 seconds and will get disconnected. While getting connected I can see the mediatek device in the port (device manager) and it goes off on disconnection. I there any other way to flash the rom than YGP tool. Is it possible to get SP flash tool rom for A109.. Please help
Experts please help me. My phone is detecting SP Flash tool. So please help me to get the sp flash tool rom

Dead boot cm flare 4 after flashing help!

FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)

Categories

Resources