I bricked my phone and it is not getting started. I have tried all the possible way explained in different forums but no luck. I have downloaded the stock rom and tried to flash using YGP tool. But my device is not getting detected by windows properly. It will get connected for a 2 seconds and will get disconnected. While getting connected I can see the mediatek device in the port (device manager) and it goes off on disconnection. I there any other way to flash the rom than YGP tool. Is it possible to get SP flash tool rom for A109.. Please help
Experts please help me. My phone is detecting SP Flash tool. So please help me to get the sp flash tool rom
Related
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
I successfully installed usb Vcomm drivers on my system and I have been using SP flash tools to work on phones until the day I decided to Flash a dead Tecno P5 and I discovered that the system cannot dictate the phone and SP flash tools can't download the stock ROM into the phone so please I really need your help!
Thank You
Hello Everyone
I need help for micromax A116 totally wasted not getting start no Led Notification for charging and when usb cable or battery is connected flash light flashes for a second and nothing after that tried MTK Droid tool, also tried to flash the mobile with SP flash tool and nothing is working out getting Error on every tool please someone help me to get the recovery installed on it so that u can install stock rom and after that root it and get the custom rom installed . Please Help its urgent
HARD BRICKED phone with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) "
this is the error message i am getting every time i am trying to flash with SP tool
luvlastcall said:
HARD BRICKED phone with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) "
this is the error message i am getting every time i am trying to flash with SP tool
Click to expand...
Click to collapse
Refer this
http://forum.xda-developers.com/showthread.php?p=45382917#post45382917
it may help and post shows for other mobile but it works for a116.
I tried pressing vol+ or vol- while connecting USB then only it will detect and rom gets flashed.
But there is chance that after flashing device may boot and works like normal and suddenly it may become like brick and you may have to try this method again to flash.
my mobile Micromax a116 was also facing same problem i was flashing repeatedly whenever it becomes like brick. one day i took it to service center when it was in brick state and they sent it to Delhi as local guys not able to fix and confirmed Mother board failure. I got new mother board installed freely at that time it was in warranty period and till date its working fine. currently i am using Discovery Rom
hello i just get a dg2014 used a good price..
i try to flash the patch for 1% battery issue, but i format the phone with sp flashtool and now i only get mtk usb port, not preloader..sp flashtool get red bar at 100% and nothing more..how can i flash the preloader or flash the phone without preloader, please i need help..i read the guide for mtk dfevices unbricking but no answer for this..
is any way or tool to flash the preloader..i mean the doogee manufacturer flash the preloader this way, so it has to have a solution, hep me please
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)