Hello Everyone
I need help for micromax A116 totally wasted not getting start no Led Notification for charging and when usb cable or battery is connected flash light flashes for a second and nothing after that tried MTK Droid tool, also tried to flash the mobile with SP flash tool and nothing is working out getting Error on every tool please someone help me to get the recovery installed on it so that u can install stock rom and after that root it and get the custom rom installed . Please Help its urgent
HARD BRICKED phone with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) "
this is the error message i am getting every time i am trying to flash with SP tool
luvlastcall said:
HARD BRICKED phone with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) "
this is the error message i am getting every time i am trying to flash with SP tool
Click to expand...
Click to collapse
Refer this
http://forum.xda-developers.com/showthread.php?p=45382917#post45382917
it may help and post shows for other mobile but it works for a116.
I tried pressing vol+ or vol- while connecting USB then only it will detect and rom gets flashed.
But there is chance that after flashing device may boot and works like normal and suddenly it may become like brick and you may have to try this method again to flash.
my mobile Micromax a116 was also facing same problem i was flashing repeatedly whenever it becomes like brick. one day i took it to service center when it was in brick state and they sent it to Delhi as local guys not able to fix and confirmed Mother board failure. I got new mother board installed freely at that time it was in warranty period and till date its working fine. currently i am using Discovery Rom
Related
I am using a lenovo p770 and today it froze... the screen was on but not responding..... so i pulled out the battery and now it doesnt even power up.... so i tried charging it and usually the indicator light glows red but now it did not... however when i pulled out the battery and continued the charging the red light came on..... and when i put the battery back in it turned off again... the phone is rooted so no warranty..... can neone help me out or at least point me in the direction of what might be wrong..... ???
i rooted the phone long time back.... abt 6 months ago and must have tried several custom roms several times.... all this while the phone was running fine.....
Thank you..
more info on the problem
Pls help...
I tried to use sp flash tools to flash the preloader....... when i connect the phone to the pc the mediatek vcom usb device is detected but as soon as sp flash tools try to write the device disconnects and i get the error that emmc not found.... i tried multiple times... i uninstalled old drivers and installed new drivers but everytime i get the same problem.... if i dont use sp flash tools then the device stays connected a little while longer but eventually disconnects within a minute....
so does the phone stand a chance of being repaired cause it gets detected at least even if its not powering up...??
I'll be trying to do the same on a completely fresh system till then ne ideas of what cld be wrong and wht cld i do to repair it would be nice.....
thank you....
Help-me I have Problem
I have a problem , when I try to Download the recovery.img , the green circle not showing , it is only an error message , under the device manager ... when I connect the phone , the computer recognize it but it is disabled after 2 second , ... and the process fails .
is there any solution for the driver disconnection ?
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
mielczareklukasz.poczta said:
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
Click to expand...
Click to collapse
Repeat the procedure pressing the small red button for 200 secconds whae you plug the usb cable for flash !
stympy said:
Repeat the procedure pressing the small red button for 200 secconds whae you plug the usb cable for flash !
Click to expand...
Click to collapse
Stympy
I tested connection with 200s (and 20s) red button pushed, but still the same issue.
After I release red button - I hear two times "windows new equipment connect" signal in laptop.
In SpFlash tool I see fast red 100% bar and messege "Error 4001".
mielczareklukasz.poczta said:
Stympy
I tested connection with 200s (and 20s) red button pushed, but still the same issue.
After I release red button - I hear two times "windows new equipment connect" signal in laptop.
In SpFlash tool I see fast red 100% bar and messege "Error 4001".
Click to expand...
Click to collapse
Can we do a team viewer sesion just to see the error and what is going on on your device manager ?
What windows do you have! Windows 8.1, 8, 7, xp ?
stympy said:
Can we do a team viewer sesion just to see the error and what is going on on your device manager ?
What windows do you have! Windows 8.1, 8, 7, xp ?
Click to expand...
Click to collapse
I use win7. Team viewer data I send you by mail.
mielczareklukasz.poczta said:
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
Click to expand...
Click to collapse
i had come across the same problem. after extensive research i came across one hint. the error could be due to wrong sp flash tool. so i downloaded the rom and the sp flashtool from the same site
go to needrom.com download/lenovo-p780-4-4-2-vibe-ui-2-0
download both rom and the sp flash tool from the same place
it should work. let me know.
mobin79 said:
i had come across the same problem. after extensive research i came across one hint. the error could be due to wrong sp flash tool. so i downloaded the rom and the sp flashtool from the same site
go to needrom.com download/lenovo-p780-4-4-2-vibe-ui-2-0
download both rom and the sp flash tool from the same place
it should work. let me know.
Click to expand...
Click to collapse
I downloaded these packed I tested - still the same problem with error 4001.
mielczareklukasz.poczta said:
I downloaded these packed I tested - still the same problem with error 4001.
Click to expand...
Click to collapse
i had formated my mobile before i loaded the new rom. also recheck the path in the sp flash tool. check that its showing the path correctly to the specified scatter file.
Hi..
I Have a problem with my Acer Liquid E2 Dual Sim..
Before this, my problem is the phone was stuck in the Ace green logo (Bootloop) and i tried to flash it using SP flash tool, and it flashed succesful until the green circle, but my device gotten even worse, now when i turn on the power, it just vibrate once and continue in blank screen only..and when i try to connect it to the pc, it recognize with a vibrate and blue led turning on, but in the device manager, it detects as MTK USB Port, the is no MTK Preloader or any driver except the mtk usb port
I already googled it, and it seems because i flashed the wrong preloader (it means i used the wrong firmware in the spflashtool), but i downloaded it from the global acer download, And another information i get that my device is in a condition where it enters the low-layer download interface of the MT65xx device (AFAIK).. Thats why it only detects as MTK USB Port. So what to do now? I have tried using SPFlashTool to Dwonload only the preloader checked using from two different rom, but no success both? already tried any different version spflashtool
Every time i tried to download the preloader to the device using spflashtool it just shows "dram failed"
like this
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!"
Does anyone knows how to fix it
Anyboy can help me pleaasee
lukerodriguez said:
Anyboy can help me pleaasee
Click to expand...
Click to collapse
i have same problem bro, is your phone already fix?
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying:
I bricked my phone and it is not getting started. I have tried all the possible way explained in different forums but no luck. I have downloaded the stock rom and tried to flash using YGP tool. But my device is not getting detected by windows properly. It will get connected for a 2 seconds and will get disconnected. While getting connected I can see the mediatek device in the port (device manager) and it goes off on disconnection. I there any other way to flash the rom than YGP tool. Is it possible to get SP flash tool rom for A109.. Please help
Experts please help me. My phone is detecting SP Flash tool. So please help me to get the sp flash tool rom