Related
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Please Help Help !!!!!
Help me For God Sake I am going Crazy !!!!!
benladen said:
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
benladen said:
Help me For God Sake I am going Crazy !!!!!
Click to expand...
Click to collapse
Why no one try to Help me please
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Up up up
help !!!!
benladen said:
Up up up
help !!!!
Click to expand...
Click to collapse
help
benladen said:
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
you help me a lot man !!!!!
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Thank you so much man you help me a lot !!!
This how i get preloader
1-remove the battery
2-connect the phone to usb but before windows detect the device put the battery back
windows will detect preloder driver !!that's great
Now must go to my office i have windows 7 there to flash the phone with stock room and i will put the result later here
because i have win8.1 at home i get a lot of problem flashing this phone on it .
thank's again Peace.
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Hello, I can't Flash the phone over the preloder i have try 2 pcs and 2 diffrent drivers no luck the sp tool give me errors 4010... 2020
after trying many times i got flashed over the mediatek usb port ....
then the usb disconnect and the MediaTek DA USB VCOM connect and the flash begin utill 100%
but the phone not starting just black screen
try to format , upgrade , download nothing try 23 stock roms the old and the new nothing
please help help !!!
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
oscarblue48 said:
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
Click to expand...
Click to collapse
I don't see preloader driver i see just mediatek usb port
I am using SP Flash Tool v3.1328.0.183 and other versions
Now the flash not working again stop at the red bar 100% and give error 4032
i am sick with that error
i read some people get they phones alive with an loading an other preloader and the flash get throw !!!
look at this
thank you for responding man.
any One what i can do now ??!!!
Help for god sake !!
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
oscarblue48 said:
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
Click to expand...
Click to collapse
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
benladen said:
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
Click to expand...
Click to collapse
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock rom you have should be fine as long as it is the correct one for your device.
oscarblue48 said:
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock ROM you have should be fine as long as it is the correct one for your device.
Click to expand...
Click to collapse
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
benladen said:
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
Click to expand...
Click to collapse
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
ok thank you i will see what i can do !!
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
Hello, man can you Help me to find Test point
look at the picture down here
thank you.
benladen said:
Hello, man can you Help me to find Test point
Click to expand...
Click to collapse
As I said, Ive never done this myself, only read about it and have no idea where the test point is on your phone, they all appear to be in different places, on an mt6577 I had previously it was easy to find, just by the sim slot, there was no need to even strip the phone down, but on most other models they all seem to be less accessible. It will be somewhere on the main board I would imagine, usually, but not always, a small round brass dot about 2mm accross, and I noticed while searching that some are marked 'KCOLO' or similar. I believe also from what I've read that the manufacturers use this method to input the factory rom, so it must be there somewhere, its just a question of locating it. The best method to find it apparently is by testing different points with a multimeter to find one that corresponds with your battery output.
some more info here... http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
and a link to rua1's russian thread on the subject, translation with google chrome is not very good but there are some pics throughout the thread that might be helpful.... http://forum.china-iphone.ru/test-pointi-dlya-proshivki-preloader-na-mt6573-75-77-t22559.html
Please i need help.
On my phone Lenovo s820 was viber rom. I try to put different. And i downladed that rom form needrom page
[
LENOVO S820 - Update 13/08/2013 -- this version i install it with flashtool .The process came ok to the end,
After complete i can t turn on my phone any more.
I try it again but after that flash tool put me only message after red bar came to 100 %
BROM ERROR:S_FT-ENABLE_DRAM_FAIL(4032)
I try put several rom but evething is same phone is dead i cant turn him on -----
For all roms what i try to put -was the same story. I vant do nothing anymore.
When i connect phone (after bricking) with usb cable on computer it found MTK USB PORT(36). Not preloader.
I do it before flasing with flash toll others Lenovo phones and always was good. But now with this lenovo s820 something went wrong.
Please i need someone who have similar probem to help me find solution to unbrick my phone.
Thanks a lot.
sukisus said:
Please i need help.
On my phone Lenovo s820 was viber rom. I try to put different. And i downladed that rom form needrom page
[
LENOVO S820 - Update 13/08/2013 -- this version i install it with flashtool .The process came ok to the end,
After complete i can t turn on my phone any more.
I try it again but after that flash tool put me only message after red bar came to 100 %
BROM ERROR:S_FT-ENABLE_DRAM_FAIL(4032)
I try put several rom but evething is same phone is dead i cant turn him on -----
For all roms what i try to put -was the same story. I vant do nothing anymore.
When i connect phone (after bricking) with usb cable on computer it found MTK USB PORT(36). Not preloader.
I do it before flasing with flash toll others Lenovo phones and always was good. But now with this lenovo s820 something went wrong.
Please i need someone who have similar probem to help me find solution to unbrick my phone.
Thanks a lot.
Click to expand...
Click to collapse
If you put it to a wall charger does the phone respond?
UltraWelfare said:
If you put it to a wall charger does the phone respond?
Click to expand...
Click to collapse
No nothing,neither in wall with charger , Nothing --unresponsive.
Only sing is when i connect him with pc is in device manager MTK USB PORT(36). But few second is availabe then it turn of. And so on all the time. Turn on and turn of in device manager.
Please if you or someone know how to repair I'd be very grateful .
I m last 3 days trying to repair it but I can t .
Flashtool send me same message again.
I tried with backup from another s820 but nothing.Same story.
Is it main problem with mtk drivers or right rom?
Thnaks a lot
sukisus said:
No nothing,neither in wall with charger , Nothing --unresponsive.
Only sing is when i connect him with pc is in device manager MTK USB PORT(36). But few second is availabe then it turn of. And so on all the time. Turn on and turn of in device manager.
Please if you or someone know how to repair I'd be very grateful .
I m last 3 days trying to repair it but I can t .
Flashtool send me same message again.
I tried with backup from another s820 but nothing.Same story.
Is it main problem with mtk drivers or right rom?
Thnaks a lot
Click to expand...
Click to collapse
Have you checked out these 2 links [1] [2]?
UltraWelfare said:
Have you checked out these 2 links [1] [2]?
Click to expand...
Click to collapse
I try but nothing.
I have similar probelm as in this video
youtube.com/watch?v=hKYH7gkvrvY
but in my sitation is not happy end- Still error
pass levigati
I think that i m during my first flashing click on firmware/upgrade instead downlad.
Maybe is this main problem?
thnaks
I've seen the other thread in xda forum that solved this problem and it's because of the preloader file but thing is which preloader file that solved this DRAM failed problem. Anyone? Please.. share the link or files included the steps?
Solution that I've already try and end up error.
- try other S820 Stock ROM , load up in SP Flash tool and end up with same error "DRAM Failed"
- take out the batt. plug in back after hit the "download" button from SP Flash tool and at the same time plug onto usb while pressing power + vol. down @ both vol. button and end up with the same error.
p/s : in my case, the usb drive is well connected and recognize by my laptop/pc desktop and I'm pretty sure that this has nothing to do with the usb driver cause my laptops still can detect my phones (com port).
Problem Solved.
I've download several files and my phone turn on back. Follows below step if you're having same problem as mine.
Problem :
Phone is already update to a new version 4.4.2 Kitkat (don't know which or what rom since this phone is not belong to me) and from what owner tell me is that this rom that installed has no gapps and he tried to install the gapps.
after flashing it, phone become dead and won't boot even can't see the bootloader. Just nothing if you hold up the power + vol. down / up or power + vol. up and down.
When plug in phone to pc / laptop, phone is detected by Lenovo usb port or MTK usb port.
Solution :
*IMPORTANT* make sure you came from what version. (mine is 4.4.2 kitkat)
Things that you need -
sd card (just enough to put the required files), usb cable, SP Flash tool v3.1328.0.183, preloader.bin file, S820_ROW_S119_130922 files and S820 Multi language files.
1. Download all the requirement files.
S820 Custom Multi language and pre_install_rom v9 here
preloader.bin file here
S820_ROW_S119_130922 here (login and passwd can be found here)
2. Extract the S820_ROW_S119_130922 files and extract the target_bin.zip files.
Then extract the Pre_install_rom v9 and rename the folder as target_bins. After that,
extract the preloader.bin files and put it on the target_bin folder. (Don't worry as in target_bin folder already has the preloader_S820_ROW.bin (119kb) ). Done extract the files, check your phone either your machine detect it by name MTK usb port or Lenovo usb port. If it is MTK then we're good to go. ( If other than that, please uninstall any other lenovo driver that you already installed in your machine. Restart machine and check again whether your machine recognize it as MTK port or Lenovo usb port. ) When you done with this, unplug your phone from your machines and leave it aside.
3. Run the SP flash tool (admin rights) and select the MT6589_Android_scatter_emmc files that located in target_bin folder. Tick the DA DL with all checksum. Then copy Checksum files in folder target_bins and paste it on target_bin folder and on SP flash tool click download. Let it load for a moment until at the bottom of it (EMMC) you see "searching".
4. take out your batt. and plug in back then plug the usb cable to your machine and wait for the sp flash tool detect your phone and start the flashing process. After done flashing, now your phone has the CWM recovery. Unplug the phone from machine and leave it aside.
5. Copy the yaaki_v9_lenovo_S820_KITKAT_4.4.2_rooted files into your sd card and plug into your phone. Press and hold the power + vol. down + vol. up and wait until you see the Lenovo logo then you can see the CWM recovery. Go to install from sd card and select the yaaki_v9_lenovo_S820_KITKAT_4.4.2_rooted files and flash it. Wait until the process finished and after it finish installed, go back and reboot system now and choose NO for disable the CWM recovery flash.
6. Wait for around 2 - 3 mins. for the updated apps. Phone rooted + gapps + custom CWM recovery.
THANKS!!!
I can't describe how much i appreciate your post. I had the exact same problems as you did, I even used the some first rom to flash which made me problems. 3 days the phone was dead. Then I tried and did the exact from how you wrote in the last post and my s820 is live again.
:laugh::laugh::laugh::laugh::laugh:
Now I'm completly sure to update mi phone, thanks!
Please help
It has been asked to extract S820_ROW_S119_130922 and extract the target_bin.zip. Further you are asking to extract Pre_install_rom v9 and the rename the folder to target bin. And again you are asked to put the extracted preloader.bin to the target bin.
I’m quite confuse over this and so I would like to raise few questions.
1) To which target bin you are asking to put the preloader.bin file? ROM’s target bin or renamed (Pre_install_rom v9) target bin?
2) And in step 3 you are asking to choose MT6589_Android_scatter_emmc from target bin. Now please tell me which target bin I have to choose? If it’s from the renamed target bin (Pre_install_rom v9) then what is the use of extracting S820_ROW_S119_130922 and again the target_bin.zip? Or if it’s from ROM’s then what is the purpose of extracting Pre_install_rom v9?
Unsuccessful !! Not working.
Flashing was completed successfully. But unfortunately ended with just a flash in the screen. It doesn't start at all.
For device produce in 2014 you must download a new preloader 2014, extract it to ROM folder and remove the checksum.ini file, and flash using SP tool.
orangdayak said:
For device produce in 2014 you must download a new preloader 2014, extract it to ROM folder and remove the checksum.ini file, and flash using SP tool.
Click to expand...
Click to collapse
still ERROE 4302 DRAM FAIL
????
PLZ ANY BODY HELP??
ricco7 said:
Solution :
*IMPORTANT* make sure you came from what version. (mine is 4.4.2 kitkat)
Things that you need -
sd card (just enough to put the required files), usb cable, SP Flash tool v3.1328.0.183, preloader.bin file, S820_ROW_S119_130922 files and S820 Multi language files.
1. Download all the requirement files.
S820 Custom Multi language and pre_install_rom v9 here
preloader.bin file here
S820_ROW_S119_130922 here (login and passwd can be found here
Hello, can you, or somebody else, mirror the files used here? Needrom does not let me download them completely. Google Drive would be fine, thanks!
@bgdn2k7 @cesarkpt @sanads @ricco7
Click to expand...
Click to collapse
Do you know?
Still 4043 error.. yay. How many mtk this S820 have?
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
soft bircked & YGDP not working a311
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
@bhavincb check this thread for flashable stock rom for a311 via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
Do you have custom recovery? If yes then follow Bhushan1985's post
if having stock recovery then download latest ygdp tool and while flashing (ENTERING DOWNLOAD MODE) connect your phone WITHOUT BATTERY.
Hope it will help!
---------- Post added at 08:59 AM ---------- Previous post was at 08:57 AM ----------
Check this link for step to step instruction for flashing stock rom with ygdp
when flashing micromax nitro a311 usig ygdp tool it stuck on 80%
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
u need to install & upgrade the drivers
khan_frd2002 said:
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
i also have same problem sir........
k2ajeet said:
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
Click to expand...
Click to collapse
my download stop at 83% and cpb download failed..............................
please help me as possible as.
sp tool also not working it shows brom error 2035
how to update drivers
lokesh314 said:
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
Click to expand...
Click to collapse
i am facing the same problem, i dont know how to update driver, i tried to update from windows update, it says you got the the latest drivers, can you provide me the link/ files for micromaxa311 driver by which my mobile can get detected by sp flash tool (ygdp too)
Same issuew
bhavincb said:
please help me.. I soft bricked my nitro a311 & try to flash stock rom with the help of ygdp.. But it is stucking at "enetering download mode"..
Please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
same issue kya karu bhai
Just FYI: I have a Coolpad F1 (which is the same hardware as the A310). I tried a bunch of ROM's incl. the 7.1.2 Lineage one, but non worked with Pokemon Go (it's my daughters "gaming phone"). So I tried the Micromax stock ROM - and Pokeman Go works. It's a terrible 4.4 ROM with a lot of trash programs built in, so really not worth considering - but Pokeman Go works..
My phone has TWRP 2.8.x installed, but I flashed it with fastboot (only boot & system), which I extracted from the stock cpb-file (4.4.031.P0.141015.8297W_I01.CPB). No need to use ygdp at all - besides using it to split the cpb-file into the flashable images. Wipe data, dalvik and cache in TWRP and then flash with fastboot the boot.img and system.img. I had some problem flashing the system.img, it worked with first formatting it and then flash with "fastboot flash -u system.img".
First install coolpad driver . because ygdp coolpad software.
Then use sp tool and flash
But sptool give error,that time you go to device manager and uninstall the driver,after uninstall coolpad driver automatically taken.and then ygdp detect your device and start flashing.
Don't use battery .
100% successful
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
Me to in the problem
Hello
Every thing was good until I decided to port a ROM for my phone
I ported it with kitchen then flashed it via SP Flash Tools. The process completed without any error. After that I tried to turn on my phone but it didnt, and my phone was completely dead and now nothing is working(The screen is black,device doesnt charge,recovery doesnt come up and even dosent conect to PC) .
I tried this trick but it didnt work too
http://forum.xda-developers.com/showthread.php?t=1943442
Because PC can not recognize the phone and when I conect the cable to the computer nothing happens. I tried differnet keys but none of them worked
The port Rom was canvas A1 4.4.4 with an odd preloader and my phone is a chinces phone with mt6582 chip (GFIVE President Classic 9).
Is there any other way to revive this phone?
thanks
Ok first you wanna download your stock rom from needrom.com...then flash it with sp tools..if this doesnt work cause sp tools isnt regognising your phone,take out your phones battery and connect it pressing the vol down button(in case it is always disconnecting itself)..ok now, open sp flash tool,take the scatter file from the rom you just downloaded and extracted...press download,connect your phone without battery and you are done!!
Godlike12 said:
Ok first you wanna download your stock rom from needrom.com...then flash it with sp tools..if this doesnt work cause sp tools isnt regognising your phone,take out your phones battery and connect it pressing the vol down button(in case it is always disconnecting itself)..ok now, open sp flash tool,take the scatter file from the rom you just downloaded and extracted...press download,connect your phone without battery and you are done!!
Click to expand...
Click to collapse
As I said it doesnt work...
The PC can not recognize the phone therefore flashing is impossible...
What can I do?