Hello guys
I have HTC one m8 att
Running 4.4.4
I can't access recovery mod and I can't do a factory rest
Hmm
No update available in the setting
I should find lollipop update
Tried setting rest
And hard rest
Can U help?...
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
AT&T HTC One (M8)
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
AT&T One (M8) Q&A, Help & Troubleshooting
Good luck!
alajrami said:
Hello guys
I have HTC one m8 att
Running 4.4.4
I can't access recovery mod and I can't do a factory rest
Hmm
No update available in the setting
I should find lollipop update
Tried setting rest
And hard rest
Can U help?...
Click to expand...
Click to collapse
What happens when you boot into bootloader and select recovery?
Lollopop has not been released yet for AT&T version. 4.4.4 was just released a couple weeks ago.
It boot back into Bootloader
alajrami said:
It boot back into Bootloader
Click to expand...
Click to collapse
Is the phone modded or not (bootloader locked or unlocked, custom recovery, root, etc.).
Are you trying to access stock recovery or custom recovery?
I bought the device with stock ruu
Then I unlocked the Bootloader
Suddenly every thing went bad like I mentioned
Now the Bootloader is relocked
I want to instale a stock Rom
The phone won't even do a factory rest
alajrami said:
I bought the device with stock ruu
Then I unlocked the Bootloader
Suddenly every thing went bad like I mentioned
Now the Bootloader is relocked
I want to instale a stock Rom
The phone won't even do a factory rest
Click to expand...
Click to collapse
Run the RUU. This should fix whatever is going on with recovery (assume you want stock recovery, as you haven't specified) as well as get you back on stock AT&T ROM.
My guess is that you just have a custom recovery install gone bad. Since you unlocked the bootloader, assume you tried to install custom recovery (as there would be no other reason to unlock the bootloader).
I tried to install the ruu but the phone doesn't accept it
Tried using adb to install it..
alajrami said:
I tried to install the ruu but the phone doesn't accept it
Click to expand...
Click to collapse
What error code?
Make sure its an RUU meant for AT&T. Hboot version of the RUU must be equal or greater than what is on the phone (no "downgrading" allowed unless you are s-off).
Tell me you hboot number, and I can tell you what AT&T RUU to use.
How did you update to 4.4.4?
I tried the same ruu on mobile 4.4.4
Even tried official lollipop from HTC site
Means no downgrading attempt
Anyway adb gives me 12 something error
About the ruu version error
But am sure am using the right ruu
alajrami said:
I tried the same ruu on mobile 4.4.4
Click to expand...
Click to collapse
That means nothing to me. What do you mean "same ruu". What is the file name exactly?
alajrami said:
Even tried official lollipop from HTC site
Click to expand...
Click to collapse
There is no Lollipop RUU for AT&T. You can't run another carrier's RUU (unless you have s-off and change CID). So that means you are running the wrong RUU.
alajrami said:
But am sure am using the right ruu
Click to expand...
Click to collapse
From the previous comment, I'm not so sure that is the case.
You didn't answer my question about what hboot number is on the phone currently.
You also did not answer my question on how you updated to 4.4.4.
Hboot 3.19.0.0000
The 4.4.4 has been auto updated before I unlocked the Bootloader
alajrami said:
Hboot 3.19.0.0000
The 4.4.4 has been auto updated before I unlocked the Bootloader
Click to expand...
Click to collapse
If you are s-on, this is the only RUU that will work: http://dl3.htc.com/application/RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Thanks a lot I will try it and give u feed back about it
Error (132): signature error
Device information
alajrami said:
Device information
Click to expand...
Click to collapse
That is not a valid AT&T 4.4.4 software number. Are you sure you have the AT&T version? It has the AT&T "globe" logo on the back; and all the stock AT&T ROMs similarly have the AT&T logo on the boot screen.
You should also do adb getvar all, and post the output (be sure to delete IMEI and serial numbers, as there are personal info and should not be posted on a public forum);.
That's a euro build, not sure of the local of it, anything .401 is euro, .502 would be AT&T. I believe your in the wrong section for your device. I would check in euro/international forum for the M8 for possible rom match.
Related
ok i downloaded the factory telus PH85IMG.zip file i relocked the bootloader then i flashed the file when i hit reboot it goes to htc logo then back to bootloader why?
avenged_sevenfold27 said:
ok i downloaded the factory telus PH85IMG.zip file i relocked the bootloader then i flashed the file when i hit reboot it goes to htc logo then back to bootloader why?
Click to expand...
Click to collapse
unlock your bootloader using hasoon aio kit here
http://forum.xda-developers.com/showthread.php?t=1493905
relock your bootloader again.
format you externel sd card.
download a different copy of PH85IMG.
you know the rest..
so i format the sdcard after i relock thebootloader? because it wont let me into recovery once my bootloader is locked the only place it allows me to go is inside the bootloader
avenged_sevenfold27 said:
so i format the sdcard after i relock thebootloader? because it wont let me into recovery once my bootloader is locked the only place it allows me to go is inside the bootloader
Click to expand...
Click to collapse
No,formatting the sd card is a different issue,its for clear all the possible bad sectors and files....put your PH85IMG file after formatting the sd card...and you do not need recovery while you returning to stock...right
If i,ve helped you,then don't forget to hit the thanks button
avenged_sevenfold27 said:
because it wont let me into recovery once my bootloader is locked the only place it allows me to go is inside the bootloader
Click to expand...
Click to collapse
you do not need recovery to flash a stock ROM,because the fastboot automatically detects your PH85IMG from your ext sd card.
avenged_sevenfold27 said:
so i format the sdcard after i relock thebootloader? because it wont let me into recovery once my bootloader is locked the only place it allows me to go is inside the bootloader
Click to expand...
Click to collapse
relock the bootloader then flash your ruu once it's done flash the jbear hboot (or else you'll have trouble flashing the recovery) plus since you already have an ics firmware why are you messing your phone up :S just flash some rom and enjoy it? you keep flashing stuff more than using your phone as a phone :/
I unlocked and installed cm 10 before I s-off. Could not run s-off successfully without stock.
So... I asked similar questions a month or so back about Telus.
I can't successfully rollback to the gb ruu or the ics ruu. The ics ruu is an ota which appears to need an gb install.
Pure stock tmous ruu check for tmous cid and fails when it finds the Telus cid.
Finally installed arhd 4 and s-off tool ran without error. I could then flash radio and hboot
Sent from my HTC_Amaze_4G using xda premium
bhtm said:
I unlocked and installed cm 10 before I s-off. Could not run s-off successfully without stock.
So... I asked similar questions a month or so back about Telus.
I can't successfully rollback to the gb ruu or the ics ruu. The ics ruu is an ota which appears to need an gb install.
Pure stock tmous ruu check for tmous cid and fails when it finds the Telus cid.
Finally installed arhd 4 and s-off tool ran without error. I could then flash radio and hboot
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
what is arhd4 wher can i find it can u upload it for me? im amaze 4g mobilicity
Alimataei said:
what is arhd4 wher can i find it can u upload it for me? im amaze 4g mobilicity
Click to expand...
Click to collapse
ARHD4 is short for Android Revolution HD version 4 which has recently been updated to version 5. It's a ROM that's very close to stock T-Mobile OTA from March of 2013, it's deodexed, with minor tweaks and slight debloating, and addons which are done through the Aroma installer. It can be found in the dev section of this board.
Odysseus1962 said:
ARHD4 is short for Android Revolution HD version 4 which has recently been updated to version 5. It's a ROM that's very close to stock T-Mobile OTA from March of 2013, it's deodexed, with minor tweaks and slight debloating, and addons which are done through the Aroma installer. It can be found in the dev section of this board.
Click to expand...
Click to collapse
ty
i installed arhd5 but when tried to s-off gives me error that u are not on stock rom
and i searched forum and google no arhd4 found
can anyone upload it for me?
Alimataei said:
ty
i installed arhd5 but when tried to s-off gives me error that u are not on stock rom
and i searched forum and google no arhd4 found
can anyone upload it for me?
Click to expand...
Click to collapse
I don't believe you can s-off with any non-stock ROM (though I may be mistaken). I think you need to be on the latest factory image from your carrier before you can run the s-off hack or it won't work. Reread through the instructions carefully and I think you'll find what I'm saying is correct.
+1
Sent from my HTC_Amaze_4G using Tapatalk
bhtm said:
I unlocked and installed cm 10 before I s-off. Could not run s-off successfully without stock.
So... I asked similar questions a month or so back about Telus.
I can't successfully rollback to the gb ruu or the ics ruu. The ics ruu is an ota which appears to need an gb install.
Pure stock tmous ruu check for tmous cid and fails when it finds the Telus cid.
Finally installed arhd 4 and s-off tool ran without error. I could then flash radio and hboot
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Odysseus1962 said:
I don't believe you can s-off with any non-stock ROM (though I may be mistaken). I think you need to be on the latest factory image from your carrier before you can run the s-off hack or it won't work. Reread through the instructions carefully and I think you'll find what I'm saying is correct.
Click to expand...
Click to collapse
this is my wxact problem and he fixed it with arhd4
Alimataei said:
this is my wxact problem and he fixed it with arhd4
Click to expand...
Click to collapse
ARHD won't help you for several reasons. First, it isn't a stock ROM, it's been rooted, deodexed, and some apps removed from stock. Second, it's based on a T-Mobile ruu and you don't have the T-Mobile version of this handset. There are several threads which detail how you can get back to stock, please read them, use the search function, and do some research for yourself rather than spamming the board requesting help.
Odysseus1962 said:
ARHD won't help you for several reasons. First, it isn't a stock ROM, it's been rooted, deodexed, and some apps removed from stock. Second, it's based on a T-Mobile ruu and you don't have the T-Mobile version of this handset. There are several threads which detail how you can get back to stock, please read them, use the search function, and do some research for yourself rather than spamming the board requesting help.
Click to expand...
Click to collapse
i searched 1 week this is the remaining answer and i have arhd5 installed and working so it doesnt mean i cant flash custom t-mob roms
Odysseus1962 said:
I don't believe you can s-off with any non-stock ROM (though I may be mistaken). I think you need to be on the latest factory image from your carrier before you can run the s-off hack or it won't work. Reread through the instructions carefully and I think you'll find what I'm saying is correct.
Click to expand...
Click to collapse
NEW PROB :
i have installed RMS_Quick-sense_v7.0_signed.zip and tried to s-off my phone:
it gave me no error and i successfully get to wire trick step but my phone dont have the pin!!!!!!
here is picture:
Alimataei said:
i searched 1 week this is the remaining answer and i have arhd5 installed and working so it doesnt mean i cant flash custom t-mob roms
Click to expand...
Click to collapse
Reread my post. I didn't say you couldn't flash it, I said you couldn't attain s-off with it, because it isn't a stock ROM for your device. In order to attain s-off the CID of the ROM has to match the CID of your handset. The vast majority of ROMs for the Amaze are made from a T-Mobile base so they are incompatible for your purposes because of this mismatch. What about this fact do you not understand? There have been many threads written about this, and the solutions have been given to you by several folks here in the forum.
Regardless, please discontinue spamming the board, especially when you have been told how to resolve your issue. You were the one who didn't initially follow directions and are now stuck, not any of us. If you're incapable of following basic directions or searching for the answers yourself then you shouldn't be modding your phone in the first place.
Odysseus1962 said:
Reread my post. I didn't say you couldn't flash it, I said you couldn't attain s-off with it, because it isn't a stock ROM for your device. In order to attain s-off the CID of the ROM has to match the CID of your handset. The vast majority of ROMs for the Amaze are made from a T-Mobile base so they are incompatible for your purposes because of this mismatch. What about this fact do you not understand? There have been many threads written about this, and the solutions have been given to you by several folks here in the forum.
Regardless, please discontinue spamming the board, especially when you have been told how to resolve your issue. You were the one who didn't initially follow directions and are now stuck, not any of us. If you're incapable of following basic directions or searching for the answers yourself then you shouldn't be modding your phone in the first place.
Click to expand...
Click to collapse
plz dont spam forum with ur useless answers
Hahahahaha you are the one whos spaming bro and then getting mad over it.....
Sent from my HTC_Amaze_4G using Tapatalk
Muneeb Saeed said:
Hahahahaha you are the one whos spaming bro and then getting mad over it.....
Sent from my HTC_Amaze_4G using Tapatalk
Click to expand...
Click to collapse
im s-off now by speed rom so u 2 plz dont help anyone else
wished to can unthanks u!
I am new to HTC as a whole. And I'm sorry if I'm missing something here. I've been spending my time reading the past couple of days trying to learn about this all.
It is mentioned but I never found a good explanation of CID and how it is relevant to anything that I have control over?
I'm currently running Trickdroid and I don't understand all of this 1.29 talk. From what I'm gathering from reading you can flash the Rom but it will not update things like the radio? Ok, How do I check my firmware/radio? version I am currently running?
Specifically am I reading beginning of dev posts and don't need to worry about this anymore because you wonderful devs have found a way to incorporate all this in just flashing a Rom?
Feeling a little overwhelmed coming from a Samsung device to all of this. So far so good, but confused and any help would be greatly appreciated..
Thank you in advance.
Dex954 said:
I am new to HTC as a whole. And I'm sorry if I'm missing something here. I've been spending my time reading the past couple of days trying to learn about this all.
It is mentioned but I never found a good explanation of CID and how it is relevant to anything that I have control over?
I'm currently running Trickdroid and I don't understand all of this 1.29 talk. From what I'm gathering from reading you can flash the Rom but it will not update things like the radio? Ok, How do I check my firmware/radio? version I am currently running?
Specifically am I reading beginning of dev posts and don't need to worry about this anymore because you wonderful devs have found a way to incorporate all this in just flashing a Rom?
Feeling a little overwhelmed coming from a Samsung device to all of this. So far so good, but confused and any help would be greatly appreciated..
Thank you in advance.
Click to expand...
Click to collapse
Radio aka baseband is almost never included in a ROM.
CID is carrier ID and every phone HTC makes has one. CID is what prevents you from installing say a UK carrier's official RUU on your At&T device.
HTC also utilizes something called SuperCID which is a carrier ID of 111111111 which allows you to install any firmware on your device. The only way at this time to get superCID is to gain S-off which is a security measure that restricts which parts of the phone software you can change.
With the HTC One, HTC changed what you have access to with an unlocked bootloader, previously, even with an unlocked bootloader you couldn't flash a kernel or a radio via recovery, now you can flash insecure kernels and HTC signed (approved) radios.
For flashing purposes, you can ignore the firmware requirements and flash the ROMs in the international section without issues.
gunnyman said:
Radio aka baseband is almost never included in a ROM.
CID is carrier ID and every phone HTC makes has one. CID is what prevents you from installing say a UK carrier's official RUU on your At&T device.
HTC also utilizes something called SuperCID which is a carrier ID of 111111111 which allows you to install any firmware on your device. The only way at this time to get superCID is to gain S-off which is a security measure that restricts which parts of the phone software you can change.
With the HTC One, HTC changed what you have access to with an unlocked bootloader, previously, even with an unlocked bootloader you couldn't flash a kernel or a radio via recovery, now you can flash insecure kernels and HTC signed (approved) radios.
For flashing purposes, you can ignore the firmware requirements and flash the ROMs in the international section without issues.
Click to expand...
Click to collapse
Ok. Thank you for that explanation. How do I check what radio/baseband I am currently using? RUU, though it can still not be changed because we have no s_off, what is it? I
Also how do I find out what CID I am?
Thank you again..
Dex954 said:
Ok. Thank you for that explanation. How do I check what radio/baseband I am currently using? RUU, though it can still not be changed because we have no s_off, what is it? I
Also how do I find out what CID I am?
Thank you again..
Click to expand...
Click to collapse
your CID if you have an AT&T HTC One is CWS_001
radio version can be found in about phone.
gunnyman said:
your CID if you have an AT&T HTC One is CWS_001
radio version can be found in about phone.
Click to expand...
Click to collapse
Ok would this be considered up to date? Why would I need to lock the bootloader again in order to update the firmware if I can just flash a Rom and it updates it for me?
Dex954 said:
Ok would this be considered up to date? Why would I need to lock the bootloader again in order to update the firmware if I can just flash a Rom and it updates it for me?
Click to expand...
Click to collapse
you are up to date, and there's no need to relock the bootloader and revert to stock for an update UNLESS HTC releases a new HBOOT (the bootloader) and the developers here will let you know if and when that's necessry
gunnyman said:
you are up to date, and there's no need to relock the bootloader and revert to stock for an update UNLESS HTC releases a new HBOOT (the bootloader) and the developers here will let you know if and when that's necessry
Click to expand...
Click to collapse
One last question as it seems you would know. Is there a thread on the s-off process and how that is coming? Or is that just background dev?
I'm sure it's being worked on by someone.
I have an HTC One M8 AT&T Branded but it has 4.4.2 on it and i wanna flash viperrom 3.2.1 but it requires androids 4.4.4 software. im S-ON, 3.16 Bootloader with 1.58.502.1 Software number. Baseband Version is 1.16.21331931.LA11G_20.31A.4145.02L. im just looking to Update from 4.4.2 to 4.4.4 but i cant seem to find out how. Any help would be great.
Perfect.
Unlock your bootlooader if you haven't already, fastboot flash recovery (TWRP/PHILZ),root using the chosen custom recovery,make a backup before or after root.
Go here http://theroot.ninja/ for Sunshine
S-OFF cause that's what your going to need to update as far as 4.4.4
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Wonders_Never_Cease said:
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Click to expand...
Click to collapse
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
jball said:
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
Click to expand...
Click to collapse
Cool thank you
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
darkninja908 said:
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
Click to expand...
Click to collapse
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Wont be much on Google @date,came from somewhere else. And nothing is ever "concrete" with software,especially with carrier branded software.
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
I have Rooted, and flashed multiple ROMS to my old M7 before. Nothing crazy.
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
pmoser16 said:
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
Click to expand...
Click to collapse
I'd say wait till tomorrow to see if an OTA update will roll out.
Or if you just can't wait for the ability to flash what you desire than I would go S-OFF and flash a non At&t firmware that you need to allow a smooth function of mentioned ROM.
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
darkninja908 said:
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
Click to expand...
Click to collapse
You can check as many times as you like by setting your time manually ahead and your phone/device won't know the difference.
Check as many times as you like but it will remain the same,you should get a notification when it's time
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
war eagle said:
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
Click to expand...
Click to collapse
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
jball said:
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
Click to expand...
Click to collapse
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
I'll just say that if it's a stock ruu than it's most likely without root and it will wipe as if it came out of the box.if its a full ruu than it will come with the updated firmware as well witch should allow you to flash 4.4.4 Roms and still run smoothly.
What I did around 5:00am this morning was restore my Dev edition backup I had along with the stock recovery so I could take the Dev edition lollipop official update and now I have lollipop firmware to use with my stock GPE 5.0.1 lollipop ROM/backup .
Sweetness
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
So can I just load the firmware file and flash thru fastboot? Is it This one?
3.28.1540.5 Firmware only unmodified (Latest 4.4.4 Update,S-OFF REQUIRED)
http://goo.gl/tyhRRZ
redpoint73 said:
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
Click to expand...
Click to collapse
Hi everyone, I'm Josh and I'm a long time reader of XDA. I'm really struggling with the next steps on my HTC one despite reading ton's of information on XDA and many other sources. I could use some help / clarification.
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
How do I go about putting these firmware updates on, is s-off required even if you use a signed RUU from "androidruu dot com" for example?
I would like to get the latest official firmware releases on the phone and get it updated to kitkat 4.4.4 from the official releases and then put a custom rom on of my choice.
Is any of this even necessary? Are firmware updates included with the Rom's? How is an RUU different than a rom?
Someone, if possible please help me get this all sorted out, I'm so confused, it would be very much appreciated. Thanks!
jpcreativeimagery said:
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
Click to expand...
Click to collapse
You wont get OTA's unless you are stock, you can use this to get back to stock: http://forum.xda-developers.com/showthread.php?t=2775650 to be able to receive OTA updates.
jpcreativeimagery said:
Are firmware updates included with the Rom's? How is an RUU different than a rom?
Click to expand...
Click to collapse
No firmwares are never included in ROMs, and RUU reset your phone (both firmware and ROM) to fully stock, but you would need an RUU with same or higher version that you are on now. (with S-ON)
what is latest att firmware
@clsA, nkk71 and I have been talking on the #AndroidRevolution irc channel, we/I am trying to get this resolved to figure out if I need s-off in order to grab latest firmware's before I apply a custom rom because it seems att is way behind everyone else since the rest seem to be 6.0.something. Can you confirm what latest att firmware # is for htc one via their software update on the phone? I have reset phone to stock but it's still stuck on 5.12.xxx.xx (whatever the # is, don't remember right now) and claiming it's up-to-date, trying to figure out if boot-loader also has to be locked in addition to stock rom and stock recovery and root removed (cause I did all that but left bootloader unlocked), I've been reading that it does, but neither of us can confirm this. And do you need official att sim/service to do the updates? Additionally, could you direct to a list of signed firmware updates for flashing with s-on if this is not the latest firmware. Thanks!
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
nkk71 said:
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
Click to expand...
Click to collapse
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
clsA said:
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
Click to expand...
Click to collapse
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
nkk71 said:
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
Click to expand...
Click to collapse
Yes they do and you have to be on their network to even download the update on Wifi
clsA said:
Yes they do and you have to be on their network to even download the update on Wifi
Click to expand...
Click to collapse
nasty
nkk71 said:
nasty
Click to expand...
Click to collapse
Well their are enough working RUU + OTApkg.zip you don't really miss much
latest firmware
clsA said:
Well their are enough working RUU + OTApkg.zip you don't really miss much
Click to expand...
Click to collapse
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
jpcreativeimagery said:
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
Click to expand...
Click to collapse
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >> https://www.androidfilehost.com/?w=files&flid=24178
Their is also a RUU now from HTC >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
bricked / boot hang / fixed with reset
clsA said:
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >>
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >>
Click to expand...
Click to collapse
@clsA, thank you so much for that, I actually ended up following @vomer 's guide and turning it into super CID because it seemed that the firmware updates were newer than the developer ones oddly enough, 6.0.9 and 6.0.9.xxx.10 and then there's 6.0.9.xxx.11 and .12 but this is where i hit a snag, all went smoothly using vomers firmwares up till 6.0.9.xxx.10 but then i tried to flash the .11 and .12 from ARHD and the device bricked/ hangs on boot....ended up having to use adb push to get your reset on there and reset the device, flash the original firmware etc...phone is working again (I was tempted to panic but maintained control ;P) but ultimately means i wasted a bunch of time only to have start over again....for now I've left it 5.12 and stock....maybe you could help figure out what went wrong when you get a chance.
Thanks.!
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
jpcreativeimagery said:
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
Click to expand...
Click to collapse
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
how to proceed
clsA said:
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
Click to expand...
Click to collapse
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
jpcreativeimagery said:
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
Click to expand...
Click to collapse
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can eather edit the android_info.txt or change you MID to make them work
clsA said:
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can either edit the android_info.txt or change you MID to make them work
Click to expand...
Click to collapse
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
jpcreativeimagery said:
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
Click to expand...
Click to collapse
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
clsA said:
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
Click to expand...
Click to collapse
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
fc3211 said:
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
Click to expand...
Click to collapse
Depends on what you mean "Try Out " ? you aether convert to Full GPe or you flash a rom.
If you convert, you simple change your CID and flash the RUU.
If you want to just see if it's for you, flash the rom .. I like this one >> http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
But it does require the latest firmware so yes post #11 would get you to the newest firmware
how do i root the htc one m8 I am familiar with rooting as i had a s4 rooted with gpe but i am confused with the htc one m8 plz help
xCellHD said:
how do i root the htc one m8 I am familiar with rooting as i had a s4 rooted with gpe but i am confused with the htc one m8 plz help
Click to expand...
Click to collapse
How to root (with links) is explained on my thread here: http://forum.xda-developers.com/showthread.php?t=2751432
Also, much of the "HTC specific" lingo is explained here: http://forum.xda-developers.com/showthread.php?p=52484527
I would suggest reading up (and making sure you understand all the terms and processes) for at least a couple hours before trying anything on the phone. I do this every time I buy a new device, even having own quite a few HTC phones. In fact, I usually start reading and researching before I have the phone in hand.
.
also is there a way were i can go back to stock when i need to thanks
xCellHD said:
also is there a way were i can go back to stock when i need to thanks
Click to expand...
Click to collapse
If your talking about ROM, then take a full backup of your ROM before flashing custom ROM using titanium/nandroid etc.
Or if your talking about root,
Just unroot using unroot apps from play store or the respected app you get after rooting.
xCellHD said:
also is there a way were i can go back to stock when i need to thanks
Click to expand...
Click to collapse
As the above reply stated, it depends on what you are talking about.
If you just want the stock ROM, recovery, etc. one option is to relock the bootloader and just run the RUU. It will return you to stock software. The only thing not "stock" will be the bootloader will say RELOCKED instead of LOCKED. You need s-off to make it say LOCKED again (after unlocking it).
?
so this is what i want to do i want to unlock bootloader then root which i know how to do but i was woundering would i be able to install this rom http://forum.xda-developers.com/att-htc-one-m8/development/rom-sd-4-0-sense7-port-sdkernel-t3062367
would i be able to install that rom soon as i am done unlocking the bootloader and rooting or would i have extra stuff sorry for the dumb questions
xCellHD said:
so this is what i want to do i want to unlock bootloader then root which i know how to do but i was woundering would i be able to install this rom http://forum.xda-developers.com/att-htc-one-m8/development/rom-sd-4-0-sense7-port-sdkernel-t3062367
would i be able to install that rom soon as i am done unlocking the bootloader and rooting or would i have extra stuff sorry for the dumb questions
Click to expand...
Click to collapse
What are your current hboot and radio numbers?
redpoint73 said:
What are your current hboot and radio numbers?
Click to expand...
Click to collapse
my hboot is 3.19 and my radio is [email protected]
xCellHD said:
my hboot is 3.19 and my radio is [email protected]
Click to expand...
Click to collapse
You should be good to go, then. Just unlock the bootloader, install custom recovery and flash the Skydragon ROM you linked.
would i need to be s-off and would i be able to go back stock and relock the bootloader with s-on again sorry for the manny questions i am new to this phone
xCellHD said:
would i need to be s-off and would i be able to go back stock and relock the bootloader with s-on again sorry for the manny questions i am new to this phone
Click to expand...
Click to collapse
You can return to stock with a RELOCKED bootloader with s-on.
You do need s-off if you want to make the bootloader say LOCKED as it was from the factory. But the only reason to ever do this is for warranty purposes. And if you bought the phone from AT&T, you should note that your warranty is through AT&T, not HTC. And AT&T doesn't give a crap if the bootloader is unlocked, or whatever (folks have even successfully sent in phones for warranty with custom ROMs on them).
If you are seeing warranty service through HTC (you didn't purchase from AT&T) that is another story. But that is the only reason I'd bother going back to LOCKED.
In normal usage, I recommend leaving the bootloader UNLOCKED as it give you more flexibility to flash ROMs whenever you want, etc. The only reason IMO to relock the bootloader in normal usage is to run the RUU.
S-off is nice have if you want to flash radios, modified hboots, and some other things (you also don't need to relock to RUU with s-off). It certainly doesn't hurt, and some folks like to make the phone as customizable as possible right away. In fact, I did s-off to the phone the second day I had it (although s-off was free back then). But for you, its not strictly "needed" at this time unless you want to do the things mentioned.
so heres the thing again sorry for the manny questions i am just making sure if i do this everything will work so heres the thing the rom i linked if i were to flash it will my at&t sevice work since it would be a different baseband
can you link me the latest twrp recovery for the at&t htc m8 so i can flash once i unlock the boatloader
xCellHD said:
can you link me the latest twrp recovery for the at&t htc m8 so i can flash once i unlock the boatloader
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html
the latest twrp 2.8.6.0 should work with my at&t m8 ?
xCellHD said:
so heres the thing again sorry for the manny questions i am just making sure if i do this everything will work so heres the thing the rom i linked if i were to flash it will my at&t sevice work since it would be a different baseband
Click to expand...
Click to collapse
The baseband isn't determined by the ROM, its determined by flashing a different baseband/radio (which requires s-off).
There are some folks that have had issues on AT&T's LTE network using some custom ROMs. Namely, not receiving or sending voice calls while on LTE. But this seems somewhat random, and not the ROMs fault per se; but probably changes that AT&T is making to their network. The most you can do is flash the Skydragon ROM, and if you have problems, try another ROM or revert to stock.
Make a backup of your stock ROM with TWRP before you flash anything, to be sure you have something to revert to if you have problems. This is good general advice before you flash any custom ROMs, root mods, etc.
I'm using the ROM your linked (Skydragon Sense 7) on AT&T, and it works fine for me.