Related
Ok, I screwed up....
Flashed the New ICS leak after relocking bootloader via PH
I was on a custom ROM and the flash failed miserably.
My phone will only boot into the bootloader and it shows Tampered and Relocked
I tried reflashing the last RUU in PH format and get an error saying Hboot version is older.
Anyone know how to get this phone to boot? Not how I wanted to start my Sat. morning at all.......
Wondering if someone can repack the latest RUU into a zip with a modified main version? I can only flash through fastboot and cannot Unlock the bootloader.
Scott has a tutorial for getting through this in the OP of ICS 4.0 Clean ROM
I'd think you would first want to unlock again. Then bootloader to recovery and restore the backup you made before trying to flash.
Got it unlocked again. I had to generate another Unlock code, my screw up somehow killed the original.
Issue resolved
Irieone said:
Got it unlocked again.
Click to expand...
Click to collapse
you need to chose factory reset , the first time after flashing a custom recovery then you can reboot into recovery after that. At least that was the experience of a few of us.
I'm back in business, but permanently branded. ( I think)
My bootloader still reads ***TAMPERED*** at the top. If anyone knows how to clear this, please let me know...
Irieone said:
I'm back in business, but permanently branded. ( I think)
My bootloader still reads ***TAMPERED*** at the top. If anyone knows how to clear this, please let me know...
Click to expand...
Click to collapse
from my reading last night it seems that this will go away once having the stock recovery back on the device, it only shows with a custom (amon ra, CWM) recovery.
andybones said:
from my reading last night it seems that this will go away once having the stock recovery back on the device, it only shows with a custom (amon ra, CWM) recovery.
Click to expand...
Click to collapse
Hmmm, it never said that until I botched flashing the new ICS leak. I spend a lot of time in the bootloader and never once saw it say tampered.
Irieone said:
Hmmm, it never said that until I botched flashing the new ICS leak. I spend a lot of time in the bootloader and never once saw it say tampered.
Click to expand...
Click to collapse
well that is because I am assuming you never installed a leaked firmware before...
you tampered with your bootloader, lol, so I guess it's letting you know.
I'm sure when I upgrade to the leak I'll have it too. not worried about it personally.
so installing the leak makes your bootloader say tampered? im sorta glad i held off on installing for right now.
Ok, I thought things were cool and they are not. I have my phone up and running. I was able to restore a backup I had...
Here is the catch tho, my phone will not read/access internal or external storage at all. My recovery will read storage
What to do now?
Irieone said:
Ok, I thought things were cool and they are not. I have my phone up and running. I was able to restore a backup I had...
Here is the catch tho, my phone will not read/access internal or external storage at all. My recovery will read storage
What to do now?
Click to expand...
Click to collapse
You can't restore backups on the new firmware.. I spent 6 hours last night into this morning figuring that out the hard way...Did you make a backup of the stock rom after you ran the RUU ? If so then just flash your backup and realize you have to wait for the roms to get updated. If you didn't the only way I can think of is to relock and rerun the RUU and don't restore backups.
Ouch, I don't have a backup of the stock rom.
Do you have a link to the last RUU? The link is dead in football's thread.
Wonder if I can flash Scott's new 4.0 ROM? I think I will try that...
[[/URL]
Irieone said:
Ouch, I don't have a backup of the stock rom.
Do you have a link to the last RUU? The link is dead in football's thread.
Click to expand...
Click to collapse
here is the one I downloadedhttp://lts.cr/Be5_ for the latest RUU. Unfortunately, once you flashed the new RUU you can't go back with the last RUU. The new one upgraded the hboot and I don't think you can downgrade.
you just need to rerun the same RUU you just did that is all and just wait for the rom you like to be updated.. most devs already have one in the works or out already
---------- Post added at 11:16 AM ---------- Previous post was at 11:02 AM ----------
Irieone said:
Ouch, I don't have a backup of the stock rom.
Do you have a link to the last RUU? The link is dead in football's thread.
Wonder if I can flash Scott's new 4.0 ROM? I think I will try that...
Click to expand...
Click to collapse
Good idea Scott's should work just fine .. just mount usb in recovery in order to get the Rom on the SD card .
Did you flash the RUU twice? That worked for me.
From here. http://forum.xda-developers.com/showthread.php?t=1550358 on your root sdcard rename the zip and flash it twice.
Scott's ROM keeps crashing and the phone reboots..
I will try flashing the RUU zip file again I guess..
You relocked the phone and change the file to PH98IMG correct?
My bootloader looked normal after the second flash. but then said tampered once i flashed a recovery.
Flyhalf205 said:
My bootloader looked normal after the second flash. but then said tampered once i flashed a recovery.
Click to expand...
Click to collapse
Were you on a custom ROM when your flashed?
Irieone said:
Were you on a custom ROM when your flashed?
Click to expand...
Click to collapse
At the time yes. Probably why I flashed it twice. But the RUU is used in HBOOT so it shouldn't have mattered if there is a custom recovery at the time.
Ok, I am doing this now
Irieone said:
Ok, I thought things were cool and they are not. I have my phone up and running. I was able to restore a backup I had...
Here is the catch tho, my phone will not read/access internal or external storage at all. My recovery will read storage
What to do now?
Click to expand...
Click to collapse
There is a zip floating around from Scott that you need to flash for your SD card. Check the development area
I've been (at least trying to) patiently wait for Deck to post full install instructions for CM10 but the CM10 op is still bare as bones. Has anyone else posted an install guide or instructions yet?
I'm currently rooted with RegawMod and running MeanRom 2.1 and it's really terribly laggy and frustrating, I can't wait any longer for CM10. Do I need S-off to install CM10 or do I just wipe, flash, and go?
Thanks for any help or links!
If you are on hboot 1.15 or higher you have to fast boot flash the kernel.
Other than that its just like a normal aosp install. Wipe flash rom flash gapps.
Its been my daily for 3 weeks.
Sent from my EVO using Tapatalk 2
You don't need s-off. You will however have to flash the boot IMG separately by using fastboot or the app flash image GUI and a full wipe is definitely required. There is a helpful thread in Q&A called "don't panic" that will answer all your questions
Good luck
Sent from my EVO using xda app-developers app
corcgaigh said:
You don't need s-off. You will however have to flash the boot IMG separately by using fastboot or the app flash image GUI and a full wipe is definitely required. There is a helpful thread in Q&A called "don't panic" that will answer all your questions
Good luck
Click to expand...
Click to collapse
Dont use flash image gui unless you know how to do it manually through fastboot. You are just asking for issues
Instructions:
http://androidforums.com/evo-4g-lte-all-things-root/606748-how-install-kernels-h-boot-1-15-a.html
Rxpert said:
If you are on hboot 1.15 or higher you have to fast boot flash the kernel.
Other than that its just like a normal aosp install. Wipe flash rom flash gapps.
Click to expand...
Click to collapse
I'm on hboot 1.12, so does that mean I can just flash normally?
edit - From what I can tell from reading, hboot 1.12 doesn't have the same restrictions that 1.15+ do, so I think I'm OK but I would like verification.
Thanks for the help everyone.
Yes hboot 1.12 allows for access to the boot partition
Also luuuuucckkyyyyyy...
EdhyMonker said:
I'm on hboot 1.12, so does that mean I can just flash normally?
edit - From what I can tell from reading, hboot 1.12 doesn't have the same restrictions that 1.15+ do, so I think I'm OK but I would like verification.
Thanks for the help everyone.
Click to expand...
Click to collapse
If you are on Hboot 1.12 I'd strongly suggest looking into getting S-OFF. Theres really no reason not to.
Up to you though, its not required
Bit off topic, anyone check to see if you can push a new splash, right now I'm too lazy to start my PC just to fastboot one measly splash
Rxpert said:
If you are on Hboot 1.12 I'd strongly suggest looking into getting S-OFF. Theres really no reason not to.
Up to you though, its not required
Click to expand...
Click to collapse
The S-OFF guide was way over my head so I just let it be. If there's not a real good reason for doing it, and I can still run CM10, then I'd rather not.
It allows you to directly flash new firmware like radios to fix any problems a device might be having. If you have Son and want the latest firmware you have to revert back to stock and accept ota, then unlock reflash recovery and reflash custom ROM or rooted stock, you could also just flash root installer if you want to just root stock
om4 said:
It allows you to directly flash new firmware like radios to fix any problems a device might be having. If you have Son and want the latest firmware you have to revert back to stock and accept ota, then unlock reflash recovery and reflash custom ROM or rooted stock, you could also just flash root installer if you want to just root stock
Click to expand...
Click to collapse
No, S-ON people with 1.12 H-boot can flash radios and firmware from recovery. They can do whatever they please in recovery just like S-OFF. S-OFF users can flash things from bootloader and even change the appearance of their h-boot to read S-ON and **locked** even though they are S-OFF
To the OP, this is the best rooting guide I've seen. It really explains everything step by step. http://androidforums.com/evo-4g-lte...panda-s-htc-dev-ltevo-root-dummies-guide.html Its recommended to have Linux at least bootable, because in the small chance the phone gets bricked... the unbricker program requires linux.
I ran it in windows before the unbricker was available, no issues here
You basically just hook the phone up to it and run the program like you do for most other root programs. All 1-click
Ah yeah forgot to mention that, most everyone is on 1.15 or 1.19 sorry
om4 said:
Ah yeah forgot to mention that, most everyone is on 1.15 or 1.19 sorry
Click to expand...
Click to collapse
Alright, I got S-Off using Lazy Panda and it went better than expected!
Do I need to flash updated firmware / radios separately from CM10, or does CM10 include latest firmware?
Sorry to ask dumb questions, but I do hope this thread will also be a good resource for others like me.
You don't have to flash any firmware updates. There are a few users with issues although they may be related to the ROM update and not necessarily the firmware included. I haven't really checked since I'm s on. If you want to update the radios there's an update zip here somewhere, be sure to read through everything carefully. Radios are more risky then every day flashing
Alright everyone now I need some help!
I flashed CM10 after s-off, was on stocked 1.13 rooted rom.
Now when CM10 boots up I am faced with a phone activation screen. It says something like "you will not be able to place calls or access the mobile network until the device is activated". I am unable to make calls or receive calls or access the internet. I have tried reflashing cm10 and the problem persists.
In the mean time, I will try flashing a nand backup and see where that gets me. I appreciate any and all help, and I have found no posts in the CM10 thread with a similar issue.
Update: I wiped and restored a back-up, MeanRom 2.1. Upon boot, hands-free activation ran and activated the phone and downloaded a PRL update. Everything is working fine now. Not sure if I should try CM10 again or what? Any advice?
EdhyMonker said:
Alright everyone now I need some help!
I flashed CM10 after s-off, was on stocked 1.13 rooted rom.
Now when CM10 boots up I am faced with a phone activation screen. It says something like "you will not be able to place calls or access the mobile network until the device is activated". I am unable to make calls or receive calls or access the internet. I have tried reflashing cm10 and the problem persists.
In the mean time, I will try flashing a nand backup and see where that gets me. I appreciate any and all help, and I have found no posts in the CM10 thread with a similar issue.
Update: I wiped and restored a back-up, MeanRom 2.1. Upon boot, hands-free activation ran and activated the phone and downloaded a PRL update. Everything is working fine now. Not sure if I should try CM10 again or what? Any advice?
Click to expand...
Click to collapse
ive only ever seen this issue with cyanogenmod and the old htc vogues, still great phones for what they were
EdhyMonker said:
Alright, I got S-Off using Lazy Panda and it went better than expected!
Do I need to flash updated firmware / radios separately from CM10, or does CM10 include latest firmware?
Sorry to ask dumb questions, but I do hope this thread will also be a good resource for others like me.
Click to expand...
Click to collapse
Yes, you should be flashing the upgraded firmware. You'll see the full firmware as the very first downloadable link. Flash that
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Rename the file to "PJ75IMG.zip", place on root of SD card, and boot into HBOOT to flash. Check the md5 to make sure its right. With radios you want to make sure its the correct file.
Welcome to S-OFF my friend
Rxpert said:
Yes, you should be flashing the upgraded firmware. You'll see the full firmware as the very first downloadable link. Flash that
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Rename the file to "PJ75IMG.zip", place on root of SD card, and boot into HBOOT to flash. Check the md5 to make sure its right. With radios you want to make sure its the correct file.
Welcome to S-OFF my friend
Click to expand...
Click to collapse
Thanks, but I tried this and it says "no image or wrong image" when trying to flash the PJ75IMG.zip file.
Did you type in PJ75IMG.zip or PJ75IMG and kept it a zip file...you should do the 2nd.
joebarkho said:
Did you type in PJ75IMG.zip or PJ75IMG and kept it a zip file...you should do the 2nd.
Click to expand...
Click to collapse
I thought that might've been the issue so I tried it both ways, didn't work either way. I'll take another shot at it tomorrow.
hello all,
I am trying to bring my phone back to stock, I already relocked with bootloader with fastboot.
and when I ran the ATT RUU (RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2.exe)
it came back with an error saying "ERROR [132]: SIGNATURE ERROR"
p.s. I was running cyangen mod 10.1 when trying all this....how do i fix this?
UPDATE: now when I try to reboot the system it goes straight to the bootloader, it wont even boot into an OS.
are you s-off?
skinsfanbdh said:
are you s-off?
Click to expand...
Click to collapse
no, it was never s-off...i thought ATT phones couldn't be s-off.
cms062407 said:
no, it was never s-off...i thought ATT phones couldn't be s-off.
Click to expand...
Click to collapse
s-off is working for all variants i believe but i know it works for at&t
you might be trying to install the wrong ruu.
Ruu fail
cms062407 said:
hello all,
I am trying to bring my phone back to stock, I already relocked with bootloader with fastboot.
and when I ran the ATT RUU (RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2.exe)
it came back with an error saying "ERROR [132]: SIGNATURE ERROR"
p.s. I was running cyangen mod 10.1 when trying all this....how do i fix this?
UPDATE: now when I try to reboot the system it goes straight to the bootloader, it wont even boot into an OS.
Click to expand...
Click to collapse
If you came from a CM variant you might want to re flash what you had. If you want to flash ruu you need to relock bootloader. It took two times for my One to take the update. FYI you will NOT have root with ruu. BTW most US roms are built on that base. If you just want a newer base the international roms like trick droid ( what i am running ), ARHD and insert coin are on the newest builds with jelly bean 4.2.2. just sayin'
skinsfanbdh said:
s-off is working for all variants i believe but i know it works for at&t
you might be trying to install the wrong ruu.
Click to expand...
Click to collapse
Is there a link to all the ATT RUUs? I did notice it said my current version was different than the "your phone will update to this" version.
cms062407 said:
Is there a link to all the ATT RUUs? I did notice it said my current version was different than the "your phone will update to this" version.
Click to expand...
Click to collapse
there is a tread on the international forum in general that has a list of ruus
Stock
myvwrocks said:
If you came from a CM variant you might want to re flash what you had. If you want to flash ruu you need to relock bootloader. It took two times for my One to take the update. FYI you will NOT have root with ruu. BTW most US roms are built on that base. If you just want a newer base the international roms like trick droid ( what i am running ), ARHD and insert coin are on the newest builds with jelly bean 4.2.2. just sayin'
Click to expand...
Click to collapse
I just reread you want to go back to stock. Same applies. Check international att original andriod development boards. They have stock newer builds there than the cingular build. It took three tries to get it to take on my One.
myvwrocks said:
If you came from a CM variant you might want to re flash what you had. If you want to flash ruu you need to relock bootloader. It took two times for my One to take the update. FYI you will NOT have root with ruu. BTW most US roms are built on that base. If you just want a newer base the international roms like trick droid ( what i am running ), ARHD and insert coin are on the newest builds with jelly bean 4.2.2. just sayin'
Click to expand...
Click to collapse
bootloader has been relocked
is there more than one RUU?
myvwrocks said:
I just reread you want to go back to stock. Same applies. Check international att original andriod development boards. They have stock newer builds there than the cingular build. It took three tries to get it to take on my One.
Click to expand...
Click to collapse
hehe international ATT?
International att
cms062407 said:
hehe international ATT?
Click to expand...
Click to collapse
Yes it sounds funny. But there alot of developers building international built completly stock roms for us at&t users
there might be. without s-off you can only install the ruu that is the exact same firmware version your phone came with i believe and yes sometimes it takes a few times to get it to finish without errors
try downloading the RUU again. There's Only ONE RUU for AT&T. Also if you unlock the bootloader again your phone will boot. With a locked bootloader and S-ON, only a fully stock ROM will boot.
okey dokey...i will try again in a bit (my phone isn't charged to 30%)
skinsfanbdh said:
there might be. without s-off you can only install the ruu that is the exact same firmware version your phone came with i believe and yes sometimes it takes a few times to get it to finish without errors
Click to expand...
Click to collapse
sooo the RUU says my current image version is 1.26.502.10 and the updated image version is 1.26.502.12....I read somewhere these numbers have to be the same? is that true???
cms062407 said:
sooo the RUU says my current image version is 1.26.502.10 and the updated image version is 1.26.502.12....I read somewhere these numbers have to be the same? is that true???
Click to expand...
Click to collapse
i think so but im not sure. easiest way if you cant get that to work after a few tries is to reunlock bootloader as gunny said and boot back to your current rom. achieve s-off and supercid then relock bootloader and flash the ruu you have
gunnyman said:
try downloading the RUU again. There's Only ONE RUU for AT&T. Also if you unlock the bootloader again your phone will boot. With a locked bootloader and S-ON, only a fully stock ROM will boot.
Click to expand...
Click to collapse
hmmmm.....i re-downloaded the RUU and tried to reinstall and got the exact same error...
skinsfanbdh said:
i think so but im not sure. easiest way if you cant get that to work after a few tries is to reunlock bootloader as gunny said and boot back to your current rom. achieve s-off and supercid then relock bootloader and flash the ruu you have
Click to expand...
Click to collapse
No. .12 is the latest stock firmware and the only RUU we saw leaked.
gunnyman said:
No. .12 is the latest stock firmware and the only RUU we saw leaked.
Click to expand...
Click to collapse
hmm, that's what I thought on the .12.....
I just noticed the RUU is getting stuck at the "sending" part to my phone, it seems like it isn't even getting to send the RUU to my phone....any idea about this?
i have heard a lot that people get errors a few times then it just works all the sudden. so try a few more times you dont need to keep redownloading it everytime just try flashing. if that doesnt work do what i said before
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
BrahManty said:
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
Click to expand...
Click to collapse
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
acejavelin said:
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
Click to expand...
Click to collapse
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
BrahManty said:
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
Click to expand...
Click to collapse
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
acejavelin said:
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
Click to expand...
Click to collapse
Oh, thank god. Hahah. I didn't remember ever flashing any leaked firmware before, so I was kind of confused there. I figured I may have done it somewhere in the unlocking/rooting process and just couldnt remember. Okay, thanks again for the help. RUU's have always confused me with the way they work. I should be stable in no time hopefully.
And now I'm having more issues... I can't use the Rom Updater because somethings wrong with my usb connection. I can plug it in and transfer files and such, but trying to use any ADB commands results in "Device not found" and the Rom Updater says it can't connect to my device either. My HTC Drivers are up to date, so I'm not sure why this is happening. Is there any way I can just get the PH98IMG.zip for 3.14.605.12 instead of having to use the RUU?
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
acejavelin said:
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
Click to expand...
Click to collapse
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
BrahManty said:
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
Click to expand...
Click to collapse
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
acejavelin said:
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
Click to expand...
Click to collapse
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
BrahManty said:
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
Click to expand...
Click to collapse
Cool, glad you got it working.
That firmware is actually pretty decent and rock solid stable, you shouldn't have any more software related issues... Plus you can root/ROM like normal from that version, the radios may be slightler lower than most recommended versions, but they should work fine. If you do decide to go the ROM route again, I would suggest going S-OFF before starting, it will just make it easier in the long run.
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
*** TAMPERED ***
*** LOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
JoeKamel said:
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
Click to expand...
Click to collapse
You should be able to just boot into twrp and flash a rom
Sent from my ADR6425LVW using xda premium
izzaeroth said:
You should be able to just boot into twrp and flash a rom
Click to expand...
Click to collapse
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
JoeKamel said:
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
Click to expand...
Click to collapse
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Sent from my ADR6425LVW using xda premium
izzaeroth said:
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Click to expand...
Click to collapse
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
JoeKamel said:
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
Click to expand...
Click to collapse
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Click to expand...
Click to collapse
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
JoeKamel said:
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
Click to expand...
Click to collapse
Recovery = twrp
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
S-off is S-off... installing a RUU wont change that, it may set you back to 'Locked", but you are S-off so it doesn't matter, you can stay locked&s-off and its no different than unlocked/S-off.
If you are going back to stock and are S-off I would use the Global Mode Leak (4.3.605.2) available on AndroidPolice and flash in Hboot... rename file to PH98IMG.zip and place in root of SD card (how it gets there is a irrelevant) then reboot into Hboot, confirm and wait.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
So I haven't really found anyone with as specific a situation I'm in so I figured I'd make a new thread.
I was running a CM10.1 build from late July, which still had some bugs but was bearable. I upgraded to CM10.2 to try it out, but it was buggier than the CM10.1 build. I saw that the bugs were fixed in the latest build of CM10.1 so I flashed that. Since then I've been stuck in Roaming and can't activate my phone.
Each time I flashed I restored my 100% stock backup (I have a nandroid from the day I got the phone). Every flash was a clean install wiping data/cache/dalvik. Was first roaming when I reverted back to CM10.1, but restoring my backup and even flashing CM10.2 again I'm roaming still.
Basically, once I was roaming, I haven't stopped regardless of ROM.
And I'm sure someone will ask, I have S-off.
How do I go about fixing this?
EDIT: I've tried a clean flash of the same ROM with the sim card removed and tried changing the subscription type after like I've seen in another thread, but this did not work.
Bartikus said:
So I haven't really found anyone with as specific a situation I'm in so I figured I'd make a new thread.
I was running a CM10.1 build from late July, which still had some bugs but was bearable. I upgraded to CM10.2 to try it out, but it was buggier than the CM10.1 build. I saw that the bugs were fixed in the latest build of CM10.1 so I flashed that. Since then I've been stuck in Roaming and can't activate my phone.
Each time I flashed I restored my 100% stock backup (I have a nandroid from the day I got the phone). Every flash was a clean install wiping data/cache/dalvik. Was first roaming when I reverted back to CM10.1, but restoring my backup and even flashing CM10.2 again I'm roaming still.
Basically, once I was roaming, I haven't stopped regardless of ROM.
And I'm sure someone will ask, I have S-off.
How do I go about fixing this?
EDIT: I've tried a clean flash of the same ROM with the sim card removed and tried changing the subscription type after like I've seen in another thread, but this did not work.
Click to expand...
Click to collapse
This happened to me randomly. Only thing that works is RUU back to stock and go through the motions. You won't lose S-OFF, so you can then come back.
hurrrtin said:
This happened to me randomly. Only thing that works is RUU back to stock and go through the motions. You won't lose S-OFF, so you can then come back.
Click to expand...
Click to collapse
I need to RUU all the down to 1.15 correct? Then will I need to Moonshine again?
Bartikus said:
I need to RUU all the down to 1.15 correct? Then will I need to Moonshine again?
Click to expand...
Click to collapse
If you are S-OFF, then yes- RUU back down to 1.15. You won't need to moonshine again.
---------- Post added at 12:18 PM ---------- Previous post was at 12:13 PM ----------
hurrrtin said:
If you are S-OFF, then yes- RUU back down to 1.15. You won't need to moonshine again.
Click to expand...
Click to collapse
It might take a little while for it to change from roaming back to normal. Just give it time after you RUU.
Bartikus said:
So I haven't really found anyone with as specific a situation I'm in so I figured I'd make a new thread.
I was running a CM10.1 build from late July, which still had some bugs but was bearable. I upgraded to CM10.2 to try it out, but it was buggier than the CM10.1 build. I saw that the bugs were fixed in the latest build of CM10.1 so I flashed that. Since then I've been stuck in Roaming and can't activate my phone.
Each time I flashed I restored my 100% stock backup (I have a nandroid from the day I got the phone). Every flash was a clean install wiping data/cache/dalvik. Was first roaming when I reverted back to CM10.1, but restoring my backup and even flashing CM10.2 again I'm roaming still.
Basically, once I was roaming, I haven't stopped regardless of ROM.
And I'm sure someone will ask, I have S-off.
How do I go about fixing this?
EDIT: I've tried a clean flash of the same ROM with the sim card removed and tried changing the subscription type after like I've seen in another thread, but this did not work.
Click to expand...
Click to collapse
I'm having the exact same issue after doing the same thing you did, not sure where to go with it at this point, nothing is working
PhantomApollyon said:
I'm having the exact same issue after doing the same thing you did, not sure where to go with it at this point, nothing is working
Click to expand...
Click to collapse
Did you try to RUU back to 1.15? I just tried running it and it crashed, not sure if it's my computer or what
hurrrtin said:
If you are S-OFF, then yes- RUU back down to 1.15. You won't need to moonshine again.
Click to expand...
Click to collapse
I tried running the RUU from here http://forum.xda-developers.com/showthread.php?t=2017525
I ignored the first part about relocking since I assumed since I have s-off I don't need to, and I immediately tried to run the .exe as admin and it crashed.
UPDATE: I've relocked it now but the RUU still crashes before doing anything.
Bartikus said:
I tried running the RUU from here http://forum.xda-developers.com/showthread.php?t=2017525
I ignored the first part about relocking since I assumed since I have s-off I don't need to, and I immediately tried to run the .exe as admin and it crashed.
UPDATE: I've relocked it now but the RUU still crashes before doing anything.
Click to expand...
Click to collapse
try grabbing the RUU from the blue link in my sig
.torrented said:
try grabbing the RUU from the blue link in my sig
Click to expand...
Click to collapse
Downloading the RUU now. I've also tried flashing the 1.15 hboot and recovery, but they don't seem to have done anything. I'm still on 2.06... I unlocked my phone originally with moonshine, so my bootloader used to say moonshine s-off. now it says tampered/locked so I think hboot worked, but the recovery doesn't seem to have done anything.
UPDATE: The RUU ran it's course. Seems like the file for the other link was just bad (I had downloaded it twice). The phone is attempting to activate now, but it still can't get a signal. I know the signal at my house is usually pretty bad, but leaving it on the window sill usually does the trick. If worse comes to worse, could I at this point return it to Verizon without them knowing what's up?
Bartikus said:
Downloading the RUU now. I've also tried flashing the 1.15 hboot and recovery, but they don't seem to have done anything. I'm still on 2.06... I unlocked my phone originally with moonshine, so my bootloader used to say moonshine s-off. now it says tampered/locked so I think hboot worked, but the recovery doesn't seem to have done anything.
UPDATE: The RUU ran it's course. Seems like the file for the other link was just bad (I had downloaded it twice). The phone is attempting to activate now, but it still can't get a signal. I know the signal at my house is usually pretty bad, but leaving it on the window sill usually does the trick. If worse comes to worse, could I at this point return it to Verizon without them knowing what's up?
Click to expand...
Click to collapse
the point of the 1.15 hboot is so the RUU works... if you want to return to stock to take to vzw I would follow the restore guide, i believe its posted in the regular dev section and not the original dev section
edit* this one right here: http://forum.xda-developers.com/showthread.php?t=2293919
.torrented said:
the point of the 1.15 hboot is so the RUU works... if you want to return to stock to take to vzw I would follow the restore guide, i believe its posted in the regular dev section and not the original dev section
edit* this one right here: http://forum.xda-developers.com/showthread.php?t=2293919
Click to expand...
Click to collapse
Yeah the RUU seemed to work, I just still can't get a signal. Phone says no service and I can't get past the activation screen. I say "seemed" to work because I can't check in settings because I can't get past the activation... but the bootloader looks like stock again, whereas it said tampered before the RUU.
Thank you for the help by the way, I appreciate it.
RUU worked, I'm on 1.15. However, it didn't solve my no service problem. Could this be as trivial as a SIM problem? Is there anything else it might be?
Reset the Phone
Bartikus said:
RUU worked, I'm on 1.15. However, it didn't solve my no service problem. Could this be as trivial as a SIM problem? Is there anything else it might be?
Click to expand...
Click to collapse
After RUU you must Reset the phone from STOCK recovery,
finanandroid said:
After RUU you must Reset the phone from STOCK recovery,
Click to expand...
Click to collapse
Worked like a charm, thanks!
Bartikus said:
Worked like a charm, thanks!
Click to expand...
Click to collapse
U welcome! Glad you finally back on business :good:
finanandroid said:
U welcome! Glad you finally back on business :good:
Click to expand...
Click to collapse
Where can I find the STOCK recovery? I've been going crazy with this stock on roam thing.
RUU to get back to Stock Recovery
chipymunk said:
Where can I find the STOCK recovery? I've been going crazy with this stock on roam thing.
Click to expand...
Click to collapse
In order to recovery or restore the original phone factory setting you have to do RUU and Reset Phone*** is the way to get back
Stock recovery(= reset phone) to work properly. Even if you are on a Stock Rom it has a custom recovery so doing factory reset wont
work to restore the original phone setting.
after RUU you must do a phone reset either from setting>back up & reset or from the bootloader factory reset is the same Stock Recovery.
I read somewhere that flashing this Rom Stock rooted fix a roaming thing so you can give it a shot http://forum.xda-developers.com/showthread.php?t=2471836