Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
* And if you point the finger at me for messing up your device, I will laugh at you.
THE FOLLOWING STEPS SHOULD ONLY BE PERFORMED ON A SAMSUNG GALAXY STAR PRO/PLUS (GT-S7262)
Steps:
1] Download SuperSU.zip
2] Transfer it (without extracting) to your phone's External SD Card
3] Download recovery.tar.md5
4] Switch off your phone
5] Put your phone in Download Mode (Volume down + Home + Power buttons simultaneously)
6] Press Volume Up to continue when asked
7] Download Odin.zip on your PC
8] Extract Odin.zip with Winrar and open Odin.exe file (the file with a blue icon)
9] Connect Phone to PC with USB Cable
10] Wait for some 15 seconds and see if COM(number) port has come in Blue colour
11] Select PDA and browse to recovery.tar.md5
12] Click the Flash button
13] Wait for it to show RESET in blue colour
14] After it shows Reset Disconnect phone from PC by removing USB Cable
15] Remove Battery of Phone
16] Insert Battery of phone
17] Put your phone in Recovery Mode (Volume Up + Power + Home buttons simultaneously)
Now use Volume buttons to navigate Up and Down (To go up, press Volume Up button Once. To go down, press Volume Down button Once) And To select an option, use the Power Button
18] Go to Install Zip From SD Card Select it
19] Go to Choose Zip From SD Card Select it
20] Now browse to SuperSU.zip where you had transferred it to your external SD Card
21] Select It
22] Go to Yes by pressing Volume Down button. Select it
23] After the process completes, your phone is successfully rooted
24] Now Go Back And Select Reboot Phone
25] Enjoy!
FAQ
Q1] I'm facing White Screen during recovery!
> This is because you are on an older firmware version. You should download a firmware later than S7262XXUAND5.
Recommended firmware version: S7262XXUANF1
Remember. Flash only if u have white screen recovery problem. Otherwise you don't need to.
Steps to flash firmware:
1] Download the firmware
2] Extract the .zip file with Winrar
3] You will get a .tar.md5 file
4] Follow Steps 4 to 16 mentioned above. But you will flash the (firmware name).tar.md5 instead of recovery.tar.md5
5] After this, flash the recovery by the procedure mentioned above.
6] Your recovery should now work
Please Click the Thanks Button Guys! Please Sign In with a Google account if you dont have an XDA account and come here and click the thanks button! Hope this Guide helped you! If you guys have any problem, quote me here.
regalstreak said:
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
* And if you point the finger at me for messing up your device, I will laugh at you.
THE FOLLOWING STEPS SHOULD ONLY BE PERFORMED ON A SAMSUNG GALAXY STAR PRO/PLUS (GT-S7262)
Steps:
1] Download SuperSU.zip
2] Transfer it (without extracting) to your phone's External SD Card
3] Download recovery.tar.md5
4] Switch off your phone
5] Put your phone in Download Mode (Volume down + Home + Power buttons simultaneously)
6] Press Volume Up to continue when asked
7] Download Odin.zip on your PC
8] Extract Odin.zip with Winrar and open Odin.exe file (the file with a blue icon)
9] Connect Phone to PC with USB Cable
10] Wait for some 15 seconds and see if COM(number) port has come in Blue colour
11] Select PDA and browse to recovery.tar.md5
12] Click the Flash button
13] Wait for it to show RESET in blue colour
14] After it shows Reset Disconnect phone from PC by removing USB Cable
15] Remove Battery of Phone
16] Insert Battery of phone
17] Put your phone in Recovery Mode (Volume Up + Power + Home buttons simultaneously)
Now use Volume buttons to navigate Up and Down (To go up, press Volume Up button Once. To go down, press Volume Down button Once) And To select an option, use the Power Button
18] Go to Install Zip From SD Card Select it
19] Go to Choose Zip From SD Card Select it
20] Now browse to SuperSU.zip where you had transferred it to your external SD Card
21] Select It
22] Go to Yes by pressing Volume Down button. Select it
23] After the process completes, your phone is successfully rooted
24] Now Go Back And Select Reboot Phone
25] Enjoy!
Please Click the Thanks Button Guys! Please Sign In with a Google account if you dont have an XDA account and come here and click the thanks button! Hope this Guide helped you! If you guys have any problem, quote me here.
Click to expand...
Click to collapse
Bro are you sure it will work on this S7262XXUANJ1 stock rom ?
TechGuyDev said:
Bro are you sure it will work on this S7262XXUANJ1 stock rom ?
Click to expand...
Click to collapse
Yaa ofcourse! Nd if it doesn't, we will find a soln...
regalstreak said:
Yaa ofcourse! Nd if it doesn't, we will find a soln...
Click to expand...
Click to collapse
Everything i have done which you have mentioned but still recovery mode ain't open i think the problem is i should download old firmware
which you have shared earlier post then may be this one is work ... :crying::crying:
TechGuyDev said:
Everything i have done which you have mentioned but still recovery mode ain't open i think the problem is i should download old firmware
which you have shared earlier post then may be this one is work ... :crying::crying:
Click to expand...
Click to collapse
Send me a YouTube video link of yr problem
Thanks a lot bro, this method worked nicely on my phone
This is the only rooting guide that works 100% of time on all latest firmwares of s7262.
regalstreak said:
Hope this Guide helped you! If you guys have any problem, quote me here.
Click to expand...
Click to collapse
Thank You, Worked Perfectly! :good:
TechGuyDev said:
Everything i have done which you have mentioned but still recovery mode ain't open i think the problem is i should download old firmware
which you have shared earlier post then may be this one is work ... :crying::crying:
Click to expand...
Click to collapse
I also have the same firmware and this method is working perfectly for me. I think I know what you are doing wrong, first you have to press the power button and then immediately press volume up + home button, when you see the S7262 logo, leave the power button but keep holding volume up + home button until you see the recovery. :good:
Thanks for the recovery.
Verified Working
I have completed this root method and verified it works using the S7262XXUANJ1 stock ROM. Doing everything as stated, it works perfectly - no white screen, no soft brick or malfunctions. :highfive:
EDIT: After the final startup I had to update SuperSU via Google Play.
Help needed.
Every time I enable app in xpose then my phone always
restart when I power off.
And when I disable apps in xpose then problem solve
But I want to enable apps..help plz
Sent from my GT-S7262 using XDA Free mobile app
Sent from my GT-S7262 using XDA Free mobile app
aabhishekz said:
Help needed.
Every time I enable app in xpose then my phone always
restart when I power off.
And when I disable apps in xpose then problem solve
But I want to enable apps..help plz
Sent from my GT-S7262 using XDA Free mobile app
Sent from my GT-S7262 using XDA Free mobile app
Click to expand...
Click to collapse
Msg me on pm. This is not related to thread. Read XDA rules. They mention that we should not hijack threads! Message me !
I rooted my mobile 2 days ago but speaker is not working properly.
souvikultimate said:
I rooted my mobile 2 days ago but speaker is not working properly.
Click to expand...
Click to collapse
Bro this has nothing to do with root. This may be a hardware problem. Get it fixed from Samsung Service!
Option in Odin3 - ID:COM not Seen
hiii
When I started Root than one problem was arise no of option 1st to 11 properly work but after 11 to... not working on Odin3 only shown my screen this message " Data Downloding""
why? & ID:com option not seen.:angel:
But without Odin mode when i connect my phone on Odin then Id:com seen my fone.
plz Help.
Success.....
At last I have succeed in rooting gt s 7262 .Thanks bro.....Thank you so much
aabhishekz said:
Help needed.
Every time I enable app in xpose then my phone always
restart when I power off.
And when I disable apps in xpose then problem solve
But I want to enable apps..help plz
Sent from my GT-S7262 using XDA Free mobile app
Sent from my GT-S7262 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G890A using Tapatalk
Prashant Goda said:
hiii
When I started Root than one problem was arise no of option 1st to 11 properly work but after 11 to... not working on Odin3 only shown my screen this message " Data Downloding""
why? & ID:com option not seen.:angel:
But without Odin mode when i connect my phone on Odin then Id:com seen my fone.
plz Help.
Click to expand...
Click to collapse
You have to install USB driver.. Dowbload this and install it :
http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
After installing try again..
tejagadhamsetti said:
At last I have succeed in rooting gt s 7262 .Thanks bro.....Thank you so much
Click to expand...
Click to collapse
Any time brother
ejtexan7 said:
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
This isnt the fault of Root.. It is the fault of your ROM.. Re fornat your phone to fix this issue.. Also reinstall stock rom.. Google for guide
no matter what i do ..I cant see the "install from sdcard option"!! Please help me friend
wayneakabro said:
no matter what i do ..I cant see the "install from sdcard option"!! Please help me friend
Click to expand...
Click to collapse
Did you flash the recovery properly? Search youtube for it if you need a vid.
Related
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Thanks!
Thanks kabayan. :good:
kaudo9 said:
Thanks kabayan. :good:
Click to expand...
Click to collapse
You are most welcome bro. Let me know if it works on stock. I did this on my flame 2.0 that seems to have been toyed with prior to my getting it. So it could be that it wasn't stock when I tried this method.
Not bale to root
Not Able to Root Karboon Titanium S1 via this Method, Eveything happening correct as per post but no Superuser & Binary after restarting
adilamir said:
Not Able to Root Karboon Titanium S1 via this Method, Eveything happening correct as per post but no Superuser & Binary after restarting
Click to expand...
Click to collapse
Hey bro sorry about that. you will have to flash the zip file using CWM.
jansdizon said:
Hey bro sorry about that. you will have to flash the zip file using CWM.
Click to expand...
Click to collapse
Bro but from where we can install CWM for it?can you please provide link of that thread
simple way of rooting
pankmohan said:
Bro but from where we can install CWM for it?can you please provide link of that thread
Click to expand...
Click to collapse
Bro yesterday i have rooted my phone simple way for rooting is just serch flame 2.0 boot image n place it in cwm recovery n click on root me file it Will 100% work also stock rom is available if you want you can use it
karbonn s1 titanium/cherry mobile flame cloc2.0kworkmod recovery!
hey guys..i just flashed clockworkmod recovery in my karbonn s1 titanium a.k.a cherry mobile flame 2.0!
so here are the steps
1.download the file named AIO flasher from the link provided below
2.download the .img file
3.connect ur phone in fastboot mode using the usb
4.open the file named aio flasher.exe
5.select the img file
6..check the recovery mode and the erase check boxes
7.select the 'from fastboot' reboot mode in the reboot menu
8.click on flash
Finally clock work mod is been flashed in your phone
:laugh::laugh:
message me for the download link..
xda is not allowing me to post any download links
Clone Caught!!
Hey Guys
Look A Like of Karbonn S1 and Cherry Mobile Flame 2.0 is K-Touch U86
http://www.gizmochina.com/2013/02/2...phone-with-quad-core-msm8225q-1-2ghz-chipset/
rooting cherry mobile hyper
hi guys.. i need your help.. does anyone here have a knowledge of rooting cherry mobile hyper? thanks..
thanks
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
thank you kabayan your the man :good:
not working
sorry but this is not working for me...
Pano
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Pano po ba mag root without losing Apps, Game datas, Save data, accounts login... Thanks po in advance
wifi signal and antenna signal becomes low
hi sir, after doing the how to root in my mobile cherry flame 2.0, my device wifi and antenna becomes low. need your advise.
after rooting procedure in flame 2.0
wifi, bluetooth and antenna signal becomes low (gray). CM flame 2.0
need your advise.
please help us by telling how to flash CWM on our karbonn s1
sir
please help us by telling how to flash CWM on our karbonn s1 ........and please provide us the links also of that essential stuff to do so ......because i tried alot of methoed like flashing with bin4cry methoed and flashing with aio flasher but every time i failed :crying:.......so please guide me ......please
Sir I need you Help
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Sir, if this was the quickiest and easier way in rooting CM Flame 2.0, theres is no need to use flasher?? or CWM? just follow the steps your giving? coz i dont have the flasher or the CWM. Plase I nedd your response Sir. Thank you.
Any roms
Sent from my GT-I8552 using XDA Premium HD app
reset for entry qpst download
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Sir do you know how to fix "reset for entry qpst download" for flame 2.0? Pls. help. Im from MAKATI
Need Help to Flash CWM
Hello All,
I have rooted my Wife's Karbonn S1 Titanium via Framaroot - Gandalf method. It was easy and 100% Rooted.
Can somebody please help with CWM Recovery Flash process with required steps and files so that I can do the needful?
Thanks in advance for your help!
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
Click to expand...
Click to collapse
This is CWM-recovery using cm-11.0 source
Changelog: Beta v1
1) Initial release of CWM-recovery
3) Has all features and fixes
Changelog: Stable
1) Final build
2) Using stock samsung kernel source now
3) Fixed wrong colour
Installation
1.)Turn on usb debugging in developer option.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC.
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the recovery.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12.)If you see a Red Exclamation on the Top Left Corner of the screen, then you have installed CWM-recovery properly, and it will open up.
FAQ
Ques.I am not able to boot into system or my phone is stuck at Samsung (Bootsplash)
Ans.
(1)Go back to recovery and wipe data, wipe cache, wipe dalvik
(2)Flash stock rom and
(3)Then again flash my recovery
Hence:- problem solved
Download
1.
a) Recovery- https://www.androidfilehost.com/?fid=24052804347848466 v1
b) Recovery- https://www.androidfilehost.com/?fid=24369303960688725 v2
2. Odin - https://drive.google.com/file/d/0BwfVH-QIZQCjWXRaNnVSN3NFZTQ/view?usp=sharing
Source :- https://github.com/orgs/Fire-Galaxy
Contributor & highly worked on CM-11 branch
@FireLord
If i forgot to mention any one in credits please pm @deniljoseph dont spoil the thread
great .....
Thanks a lot bro. Flashed as you said and it works like a charm.
Sent from my GT-S7262 using XDA Free mobile app
Good Work @FireLord buddy! Keep It Up.
Thanks
Thanks everyone
Nice.
Thanks a lot bro.....It worked......
jithinjmj777 said:
Thanks a lot bro.....It worked......
Click to expand...
Click to collapse
pleasure
thanks a lot bro.. its really works
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
Click to expand...
Click to collapse
WARNING!!!!!
Rooting (gaining root user access) voids warranty. Rooting has its own Pros and Cons. I hold no responsibility if you
brick your device in the process.
Links:-
recovery.tar.md5(by @FireLord )--> http://forum.xda-developers.com/galaxy-star/development/cwm-t3235318
Odin v3.09--> https://drive.google.com/file/d/0BwfVH-QIZQCjWXRaNnVSN3NFZTQ/view?usp=sharing9
SuperSu.zip--> http://www23.zippyshare.com/d/54713367/2388/SuperSU.zip
Steps:-
1.)Update your phone to latest firmware.
2.)Put SuperSu.zip in extcard.
3.)Turn on usb debugging in developer option.
4.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
5.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
6.)Open Odin on PC.
7.)UNTICK everything
8.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
9.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
10.)Select the recovery.tar.md5
11.)Press on start.
12.)Remove battery quickly after Odin says pass before it boots up.
13.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
14.)If you see a Red Exclamation on the Top Left Corner of the screen, then you have installed CWM properly, and it will open up.
15.)Select Install zip from SD Card.
16.)Select Choose zip from SD Card.
17.)Select SuperSu.zip.
18.)Now scroll down and select Yes.
19.)Now go back to the main CWM menu and select Reboot Now.
20.)Select No/Yes (I have tried with both, it did not make any difference)
For more/detailed osm guide you people can follow the guide from here too :-
http://www.squodo.com/how-to-root-samsung-galaxy-star-proplus-gt-s7262/#.VozJsY197CI (by @anilsingh1605 )
Good Work..Bro
cool dude :thumbup:
Rahul Rao said:
Good Work..Bro
Click to expand...
Click to collapse
hehe
Dreamstar said:
cool dude :thumbup:
Click to expand...
Click to collapse
TWRP INSTALL TUTORIAL OF GALAXY CORE PRIME [SM-G360H] 100 % WORK
REQUIRED :
1.A windows pc 32 bit.
2. SM-G360H TWRP 4.4.4.tar File
OKK LETS START....!
1. Download SM-G360H TWRP File from this link
mediafire.com/download/xadnurbtu2s54ob/SM-G360H__TWRP_4.4.4.tar
2. Put your device on USBdebugging mode,,
Go to (-->About Device--->Bulid Number (tap it {7-9} times)---> now you will be able to go to "Developer Option"* Now tick USB Debugging mode.
3. Install SAMSUNG usb driver your computer.
mediafire.com/download/23pvwn5l5an8s6i/samsung_android_usb_driver.rar
4. Power off your phone,Connect your device to your laptop..
Now open Odin as administrator..
5- Now press and hold (volume down + HomeScreen key + Power key) then press volume Up to continue...
6- Go to Odin when recognize your device click "AP"* then select were does "360H TWRP.tar"* saved and click Start.
After Finished your phoneboot automatically..
7. after install Twrp successfully your phone reboot automatically..
8.then press (home button)+ (volume + button)+(power button) all button and wait until go to recovery mode...
ENJOY IT..
NOTE- [I DON'T RESPONSIBLE FOR ANY DAMAGE OF UR PHONE]
Anyone have a link for a TWRP image for a SM-G360V ?
thanx
it works....!!!!
i have tried it multiple times and it is successful but when i go in recovery mode idont have twrp..................................... pls help....
:crying:
This video will help you out
HADIHASSAN04 said:
i have tried it multiple times and it is successful but when i go in recovery mode idont have twrp..................................... pls help....
:crying:
Click to expand...
Click to collapse
Here is a video posted by #MobileScience team on how to flash and boot into custom recovery like #TWRP .
Kindly watch it and enjoy & if help you out then just subscribe the channel and ask your friends and to do the same and also share the video with your friends and WhatsApp group.
If YouTube video not playing then go to the below mentioned YouTube link to view the video.
https://youtu.be/-FT-brwwj-o
Thanks. But where is marshmallow touchwiz rom sir? What happened? What went wrong?
arnette said:
Thanks. But where is marshmallow touchwiz rom sir? What happened? What went wrong?
Click to expand...
Click to collapse
first..this is very old twrp thread...anyways about tw mm dont worry. will make thread later.
mv2007 said:
first..this is very old twrp thread...anyways about tw mm dont worry. will make thread later.
Click to expand...
Click to collapse
mobile data will not be fixed? as without them.
Sent from my Samsung SM-G360H using XDA Labs
Any 1 have a link for Samsung Galaxy Core Prime sm-g360v ?