Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Thanks!
Thanks kabayan. :good:
kaudo9 said:
Thanks kabayan. :good:
Click to expand...
Click to collapse
You are most welcome bro. Let me know if it works on stock. I did this on my flame 2.0 that seems to have been toyed with prior to my getting it. So it could be that it wasn't stock when I tried this method.
Not bale to root
Not Able to Root Karboon Titanium S1 via this Method, Eveything happening correct as per post but no Superuser & Binary after restarting
adilamir said:
Not Able to Root Karboon Titanium S1 via this Method, Eveything happening correct as per post but no Superuser & Binary after restarting
Click to expand...
Click to collapse
Hey bro sorry about that. you will have to flash the zip file using CWM.
jansdizon said:
Hey bro sorry about that. you will have to flash the zip file using CWM.
Click to expand...
Click to collapse
Bro but from where we can install CWM for it?can you please provide link of that thread
simple way of rooting
pankmohan said:
Bro but from where we can install CWM for it?can you please provide link of that thread
Click to expand...
Click to collapse
Bro yesterday i have rooted my phone simple way for rooting is just serch flame 2.0 boot image n place it in cwm recovery n click on root me file it Will 100% work also stock rom is available if you want you can use it
karbonn s1 titanium/cherry mobile flame cloc2.0kworkmod recovery!
hey guys..i just flashed clockworkmod recovery in my karbonn s1 titanium a.k.a cherry mobile flame 2.0!
so here are the steps
1.download the file named AIO flasher from the link provided below
2.download the .img file
3.connect ur phone in fastboot mode using the usb
4.open the file named aio flasher.exe
5.select the img file
6..check the recovery mode and the erase check boxes
7.select the 'from fastboot' reboot mode in the reboot menu
8.click on flash
Finally clock work mod is been flashed in your phone
:laugh::laugh:
message me for the download link..
xda is not allowing me to post any download links
Clone Caught!!
Hey Guys
Look A Like of Karbonn S1 and Cherry Mobile Flame 2.0 is K-Touch U86
http://www.gizmochina.com/2013/02/2...phone-with-quad-core-msm8225q-1-2ghz-chipset/
rooting cherry mobile hyper
hi guys.. i need your help.. does anyone here have a knowledge of rooting cherry mobile hyper? thanks..
thanks
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
thank you kabayan your the man :good:
not working
sorry but this is not working for me...
Pano
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Pano po ba mag root without losing Apps, Game datas, Save data, accounts login... Thanks po in advance
wifi signal and antenna signal becomes low
hi sir, after doing the how to root in my mobile cherry flame 2.0, my device wifi and antenna becomes low. need your advise.
after rooting procedure in flame 2.0
wifi, bluetooth and antenna signal becomes low (gray). CM flame 2.0
need your advise.
please help us by telling how to flash CWM on our karbonn s1
sir
please help us by telling how to flash CWM on our karbonn s1 ........and please provide us the links also of that essential stuff to do so ......because i tried alot of methoed like flashing with bin4cry methoed and flashing with aio flasher but every time i failed :crying:.......so please guide me ......please
Sir I need you Help
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Sir, if this was the quickiest and easier way in rooting CM Flame 2.0, theres is no need to use flasher?? or CWM? just follow the steps your giving? coz i dont have the flasher or the CWM. Plase I nedd your response Sir. Thank you.
Any roms
Sent from my GT-I8552 using XDA Premium HD app
reset for entry qpst download
jansdizon said:
Hey guys. Im a noob here. just thought i'd share something is stumbled upon.
This is probably the easiest and quickest method to ROOT your Cherry Mobile Flame 2.0/ Karbonn S1 Titanium.
STEPS:
1. Download ZIP File for rooting in the attachments below
2. Connect your device to a pc and copy and paste the ZIP file you just downloaded to the external card on the device. (it really does not matter if your phone is in USB debugging mode or not.)
3. Disconnect the device from the PC safely and turn it off.
4. Hold the volume up key+ power button at the same time until a green screen appears. (this is the fastboot mode) Keep holding until screen turns red (recovery mode) and release to enter stock recovery.
5. Navigate using hardware buttons (power to confirm selections) and wipe cache partition and factory reset data.
6. select "apply update from external SD card" and navigate to where you pasted the ZIP file for rooting.
7. Confirm the ZIP file selection and wait for the process to finish.
8. Reboot the device.
THAT'S IT!!!
your phone should now be rooted. the super user app should now be visible in the app drawer of the device.
Thanks.
Kindly kit thanks if this helped you. CHEERS!
Click to expand...
Click to collapse
Sir do you know how to fix "reset for entry qpst download" for flame 2.0? Pls. help. Im from MAKATI
Need Help to Flash CWM
Hello All,
I have rooted my Wife's Karbonn S1 Titanium via Framaroot - Gandalf method. It was easy and 100% Rooted.
Can somebody please help with CWM Recovery Flash process with required steps and files so that I can do the needful?
Thanks in advance for your help!
Related
Firstly Format ur memory card......
Plug the SD card into your computer. Drag the ROM's ZIP file to your SD card, and wait for it to copy.
When it's done copying, eject the SD card and put it back in your phone. Reboot into Recovery mode
Use your volume keys to navigate the menus, and your power button to select menu items.WIPE DATA AND WIPE CACHE PARTITION..... Scroll down to "Install ZIP From SD Card" and navigate to the ZIP file you just copied over. Give it time to flash the ROM
When it's done, reboot your phone.
2nd method
Firstly Format ur memory card........
Open in Recovery mode......Wipe data and Wipe Cache.....click reboot now....after phone starts it shows some error and phone may struck or u will be directed to the same problem u had i.e, rebootin several times or Strucking at start up screen....dont mind it....Now turn off the mobile by removing battery and start phone in DOWNLOAD MODE and connect ur mobile to pc via usb.......
Open Odin multi downloader v4.38........flash the rom........
NOW UR MOBILE IS ALIVE.....
NOTE: 1st method worked for mah friend long ago before my phone bricked....2nd method worked for me(self xperience ).......
this is for softbrickss
Hardbrick is unrecoverable [only service center will help by replacing whole board]
madman_amit said:
this is for softbrickss
Hardbrick is unrecoverable [only service center will help by replacing whole board]
Click to expand...
Click to collapse
oh..tanq for rep by d way can u tell me how hard brick of mobile causes...when flashing the rom only????????
pagadalachetan said:
oh..tanq for rep by d way can u tell me how hard brick of mobile causes...when flashing the rom only????????
Click to expand...
Click to collapse
many cause
1. kies going berserk
2. flashing wrong recovery ie via rom manager
3. flashing rom from other devices
4. try to network unlock
5. lazy to read guide on first post of any given thread
6. moronic and stupidity
Thanx mate
Got back my Galaxy ace...thanx dude
Its kay dude
not able to get to download mode
I bricked my ace with rom manager it doesnt goes to download mode i even tried with a usb jig but its not working... is it the jig?
I connected it before using the jig for an hour to the power socket so.. any suggestions?
Thanks
an0nym0us_ said:
many cause
1. kies going berserk
2. flashing wrong recovery ie via rom manager
3. flashing rom from other devices
4. try to network unlock
5. lazy to read guide on first post of any given thread
6. moronic and stupidity
Click to expand...
Click to collapse
Number 6 is what we are when first using the android
regards,
•ƒγяύs ργяσ™•
... any constructive sugestions in what to do.. other then stating the obvious from previous post
an0nym0us_ said:
many cause
1. kies going berserk
2. flashing wrong recovery ie via rom manager
3. flashing rom from other devices
4. try to network unlock
5. lazy to read guide on first post of any given thread
6. moronic and stupidity
Click to expand...
Click to collapse
Using wrong update-binary or flash_image binary to flash boot or recovery image.
the phone doesn't go to download mode or recovery or switchs on ... so i dont understand your previous post
Any suggestions besides ...you screwed up your phone, ... i know that
What is download mode?
How do you go there?
[practice random acts of kindness and selfless acts of love]
porlish said:
the phone doesn't go to download mode or recovery or switchs on ... So i dont understand your previous post
any suggestions besides ...you screwed up your phone, ... I know that
Click to expand...
Click to collapse
one thumb rule
you use rom manager........ Go to service center
no one can help you here
HELP
pagadalachetan said:
firstly format ur memory card......
Plug the sd card into your computer. Drag the rom's zip file to your sd card, and wait for it to copy.
When it's done copying, eject the sd card and put it back in your phone. Reboot into recovery mode
use your volume keys to navigate the menus, and your power button to select menu items.wipe data and wipe cache partition..... Scroll down to "install zip from sd card" and navigate to the zip file you just copied over. Give it time to flash the rom
when it's done, reboot your phone.
2nd method
firstly format ur memory card........
Open in recovery mode......wipe data and wipe cache.....click reboot now....after phone starts it shows some error and phone may struck or u will be directed to the same problem u had i.e, rebootin several times or strucking at start up screen....dont mind it....now turn off the mobile by removing battery and start phone in download mode and connect ur mobile to pc via usb.......
Open odin multi downloader v4.38........flash the rom........
Now ur mobile is alive.....
Note: 1st method worked for mah friend long ago before my phone bricked....2nd method worked for me(self xperience ).......:d
Click to expand...
Click to collapse
i have tried both ways but still dont work!!!
Rom manager destroys your motherboard... tell service centre kies crashed when updating an act incompetent... they should believe you
Sent from my GT-S5830 using XDA
Second option didnt work 4 me..
pagadalachetan said:
Firstly Format ur memory card......
Plug the SD card into your computer. Drag the ROM's ZIP file to your SD card, and wait for it to copy.
When it's done copying, eject the SD card and put it back in your phone. Reboot into Recovery mode
Use your volume keys to navigate the menus, and your power button to select menu items.WIPE DATA AND WIPE CACHE PARTITION..... Scroll down to "Install ZIP From SD Card" and navigate to the ZIP file you just copied over. Give it time to flash the ROM
When it's done, reboot your phone.
2nd method
Firstly Format ur memory card........
Open in Recovery mode......Wipe data and Wipe Cache.....click reboot now....after phone starts it shows some error and phone may struck or u will be directed to the same problem u had i.e, rebootin several times or Strucking at start up screen....dont mind it....Now turn off the mobile by removing battery and start phone in DOWNLOAD MODE and connect ur mobile to pc via usb.......
Open Odin multi downloader v4.38........flash the rom........
NOW UR MOBILE IS ALIVE.....
NOTE: 1st method worked for mah friend long ago before my phone bricked....2nd method worked for me(self xperience ).......
Click to expand...
Click to collapse
Hi... I have tried your second option with the rom 2.3.4 ( S5830DDKQ5_bysamsdroid ) but still I can't Switch ON, No recovery mode,No downloading mode is working... to switch ON the ph. I need to put my ph. on charging & pressing the power button. I think now I have to submit my mobile to service centre.... ..
saumil_1_1 said:
Hi... I have tried your second option with the rom 2.3.4 ( S5830DDKQ5_bysamsdroid ) but still I can't Switch ON, No recovery mode,No downloading mode is working... to switch ON the ph. I need to put my ph. on charging & pressing the power button. I think now I have to submit my mobile to service centre.... ..
Click to expand...
Click to collapse
if u flSHED with rom manager and got bricked ur device then u should go to service center
I've bricked my Galaxy Ace S5830.........I don't have a pc, I'm writing this from my friend's phone!! Please help me, I've rooted via Superuser,
I.e. installing Root.zip and rebooting, after that searching for a SUPERUSER icon! Please help...........I'm in tears!!
hitulg said:
I've bricked my Galaxy Ace S5830.........I don't have a pc, I'm writing this from my friend's phone!! Please help me, I've rooted via Superuser,
I.e. installing Root.zip and rebooting, after that searching for a SUPERUSER icon! Please help...........I'm in tears!!
Click to expand...
Click to collapse
I cant get what you got...is ur phone live or dead ?
Sent from my GT-S5830 using xda app-developers app
thnx
thnx dude
how to flash huawei C8511 (mts mtag) if I by chance brick it during rooting?
I've tried z4root and the procedures from this forum for my phone MTS Mtag (Re-branded Huawei C8511 - India), but unfortunately it failed. Now I realize that, z4root v 1.3 can not root Android 2.2.2.
Waiting for an update of z4root.
SuperOneClickv2.2-ShortFuse
i tried google "SuperOneClickv2.2-ShortFuse.zip"
& it works & can be unrooted if required
Me too finally rooted my MTS Mtag (Huawei C8511)
Me too finally rooted my MTS Mtag (Huawei C8511) with SuperOneClickv2.3.3 from the Developer Site ShortFuse.Org.
I Followed these steps....
(1) Downloaded the latest version (on 5 May 2012) SuperOneClickv2.3.3 from the developer website ShortFuse.Org
(2) Unzipped the file downloaded in PC
(3) Connected my phone (I've already installed the essential drivers of my phone and using the "Hi Suite"(its a PC Suite) provided by Huawei)
(4) Click on Root button on the application
(5) After few seconds it shows my phone is Rooted. I've restarted my phone, and Now my phone is Rooted.
Simple steps, right???
-
DreamzVp
RE: Flashing Huawei C8511
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Kingroot (Chinese)
The one single rooting application for all Huawei phones and other devices. It is a chinese apk for those who can use it. I take no credits for this.
How did u start 1x/evdo
dr.faramroze said:
i rooted this phone and removed all carrierware. I am proud to say i am the first guy to modify this phone and start 1x/evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
t_avin said:
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
Click to expand...
Click to collapse
Look for my post on RIMweb forum.
EVOing on Reliance using Tapatalk
Hey how you rooted your phone and done recovery
Sent from my Spice Mi-270 using xda premium
dr.faramroze said:
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
hi
can you tell me are you able to unlock this phone
JohnnyParanoia said:
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
Click to expand...
Click to collapse
link not working… file deleted
New link
abhinav2hd said:
link not working… file deleted
Click to expand...
Click to collapse
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
JohnnyParanoia said:
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
Click to expand...
Click to collapse
thanks for new link
dr.faramroze said:
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Click to expand...
Click to collapse
thanks very much
update rom can fins here...http://www.needrom.com/download/huawei-c8500-3/
ROM Version: ROM Android 4.0.4
after flashing this rom phone nottt starting....it restart from logo ..............................................
here is full details about custom rom instalation to huawei c8511
http://forum.gsmhosting.com/vbb/f92...-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
http://forum.gsmhosting.com/vbb/f929/huawei-c8511-c8500s-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
There is no fofum for my phone, does anyone know of a guide on how to get root on the M Style? The universal Samsung root for flashing in stock recovery doesnt work, super one click doesnt work, and xray say my device is immune to the known exploits. Im willing to root the hard way if I have too, just need steps so I dont brick my phone. Must... Delete... Bloat...
Edit- M340K, sorry.
Bump... Anyone know how to root this thing?
One more bump in case anyone else needs this, I found this finally.
http://auv.me/Galaxy-M-Style-SHW-M340K-root-rom
Its a standard Odin flash, all the odin files and pre-rooted rom are linked here. You can flash it as an update and keep everything, no need to wipe. It does install some carrier bloat (so I had two sets of bloat) but its rooted, so you can get rid of all of it.
nifterific said:
One more bump in case anyone else needs this, I found this finally.
http://auv.me/Galaxy-M-Style-SHW-M340K-root-rom
Its a standard Odin flash, all the odin files and pre-rooted rom are linked here. You can flash it as an update and keep everything, no need to wipe. It does install some carrier bloat (so I had two sets of bloat) but its rooted, so you can get rid of all of it.
Click to expand...
Click to collapse
Hi, will this work on a Korean Galaxy M Style M340S? Please let me know!! :laugh:
domenicostorino said:
Hi, will this work on a Korean Galaxy M Style M340S? Please let me know!! :laugh:
Click to expand...
Click to collapse
It should. My phone says its an M340S now in settings but everything still works so it should work on both models.
Hi. Im using the same phone. But the link is in korean text i think. Help
Sent from my SHW-M340S using xda app-developers app
I just recently rooted my Samsung M Style SHW-M340S phone.
[GUIDE]
1. Download the attachment that I uploaded.
2. Transfer the zip file to the root of your sdcard either by connecting your phone to your computer or wirelessly (Do not unzip the file).
3. Turn off your phone.
4. Go into Recovery Mode by holding down the home button, volume up button, volume down button, and the power button at the same time. Once you see the SAMSUNG logo show up, release the power button and you should see the recovery menu. Select "apply update from sdcard". Use the volume up and down buttons to scroll up and down the menu. Press the home button to select your option.
5. Use the volume up and down buttons and choose the zip file.
6. After the update is complete, choose the option to "reboot system now".
7. After the phone finishes restarting, you now have a rooted phone.
Note: I'm not sure if this will work on a M340K/L phone as I don't have those phones to test out.
m340s
I used several methods to root my m340s. but non of them worked.
After following ur proceeedure when i run terminal emulator it shows $ mark. but when i run the code "su" (without quotes) there it was turned to # instead of $ and it allowed to run that code. I think its rooted now.
Thanks a lot..
I dont know what to do next. im serching the web..
ImAhNoBoDy said:
I just recently rooted my Samsung M Style SHW-M340S phone.
[GUIDE]
1. Download the attachment that I uploaded.
2. Transfer the zip file to the root of your sdcard either by connecting your phone to your computer or wirelessly (Do not unzip the file).
3. Turn off your phone.
4. Go into Recovery Mode by holding down the home button, volume up button, volume down button, and the power button at the same time. Once you see the SAMSUNG logo show up, release the power button and you should see the recovery menu. Select "apply update from sdcard". Use the volume up and down buttons to scroll up and down the menu. Press the home button to select your option.
5. Use the volume up and down buttons and choose the zip file.
6. After the update is complete, choose the option to "reboot system now".
7. After the phone finishes restarting, you now have a rooted phone.
Note: I'm not sure if this will work on a M340K/L phone as I don't have those phones to test out.
Click to expand...
Click to collapse
Hi, Thanks for pointing me the root, do you know rom for m340s?
M340s said:
I used several methods to root my m340s. but non of them worked.
After following ur proceeedure when i run terminal emulator it shows $ mark. but when i run the code "su" (without quotes) there it was turned to # instead of $ and it allowed to run that code. I think its rooted now.
Thanks a lot..
I dont know what to do next. im serching the web..
Click to expand...
Click to collapse
Yea...I'm not sure about how to root the phone through terminal emulator, so I'm not sure what you need.
nguyenhongquan said:
Hi, Thanks for pointing me the root, do you know rom for m340s?
Click to expand...
Click to collapse
I can't link anything here as I don't have 10 posts yet. You can look up "home_m340s.fh27" on google and you should be able to download it. Most will be from Korean sites though.
nifterific said:
It should. My phone says its an M340S now in settings but everything still works so it should work on both models.
Click to expand...
Click to collapse
Mine is M340s. I am about to flash my phone following your thread. Pls, any one confirm that the rom support English laguage. Thanks
ImAhNoBoDy said:
Yea...I'm not sure about how to root the phone through terminal emulator, so I'm not sure what you need.
I can't link anything here as I don't have 10 posts yet. You can look up "home_m340s.fh27" on google and you should be able to download it. Most will be from Korean sites though.
Click to expand...
Click to collapse
sir can you link it to me cause i'm having problem in my phone m340s i cant send any messages. i need it as soon as possible thanks sir
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
So I have some great news for all you US Cellular owners out there. I have found a way to root the Mega. To my knowledge this is THE FIRST ROOT FOR THE US CELLULAR MEGA. This will only work for the 4.4.2 version so make sure you have updated or flashed it in odin.
I hope this tutorial isn't too confusing. Sorry I'm not a good teach but I want to get this out to the people who are having trouble getting rooted.
Things you will need:
1. SCH-R960 Device (US Cellular Galaxy Mega)
2. A good micro usb cable. Preferable the cable that came in the box.
3. A PC
4. Odin 3.09 http://odindownload.com/
5. CWM Recovery http://fs1.d-h.st/download/00066/7VS/i9200-cwm-recovery(201362118259).tar
6.And the actual root file http://download.chainfire.eu/446/SuperSU/UPDATE-SuperSU-v1.99r3.zip?retrieve_file=1
Note:The CWM and root files say they are for the i9200 version. They work fine for the SCH-R960
Ok first you need open Odin and plug your device into your PC. If the connection is successful then the box at the top left corner will turn light blue.
Put your device into download mode put hold volume down+home+power until a screen appears, then press volume up.
Click on the AP button and browse to the folder you placed CWM in and choose the file.
Make sure you dont change any settings in odin or check or uncheck any boxes, Click Start
Odin will do its thing and the phone will reboot.
After it passes the Samsung Galaxy Mega screen it is safe to unplug the device from the PC
Let the phone boot.
After it boots you need to close odin plug your usb cable back into the phone.
Find the SuperSUUPDATE.zip file and place it onto the root of either the internal storage or external SD card. (I used the internal storage)
Now you can unplug the usb cable from the phone and power it off.
Boot into Recovery by using the volume up+home+power keys until you see the first screen pop and the release.
You should now be in recovery mode.
Using the volume rockers and power button, choose intsall zip update package
Choose zip from sdcard
Then navigate to where the .zip file is located
When you find it, click on it and choose yes
Then choose Go Back
Reboot System Now
Then you should see a screen that says at the top "ROM may flash stock recovery on boot. THIS CANNOT BE UNDONE.
(These next 2 steps are very important)
Choose "Yes - Disable revocery flash"
Then choose 'Yes - Fix Root"
The device will restart
After reboot, you will see an icon in your app tray called SUPER SU
Don't open it yet.
Open the Play Store and search Super SU
You should see that it is installed but needs an update.
Go ahead and click update.
When you open the app most likely you will get a message that says Binary needs updated. Choose yes.
For the next pop-up choose normal (This step can take a few mins)
After it is completed it will say "Samsung Knox has been detected" choose OK to disable
This step also can take some time if you are on the screen for more than 1-2 minutes close the app and uninstall from the play store and repeat these steps.
Now you should be rooted. You can check this by install an app called Root Checker Basic
I hope this helps everyone in getting rooted.
Anyway to..
Is there anyway I could use TWRP instead of CWM for the custom recovery in this process?? Thanks!
MeatHammer311 said:
Is there anyway I could use TWRP instead of CWM for the custom recovery in this process?? Thanks!
Click to expand...
Click to collapse
I havnt tested TWRP but I don't see why it wouldn't work.
Thanks vBIGLEWISv, worked like a charm.... I was actually scared to death fearing dreaded bricking my device... but it worked.. I can breath much better now.. Thanks buddy...
vBIGLEWISv said:
Ok first you need open Odin and plug your device into your PC. If the connection is successful then the box at the top left corner will turn light blue.
Put your device into download mode put hold volume down+home+power until a screen appears, then press volume up.
Click on the AP button and browse to the folder you placed CWM in and choose the file.
Make sure you dont change any settings in odin or check or uncheck any boxes, Click Start
Odin will do its thing and the phone will reboot.
After it passes the Samsung Galaxy Mega screen it is safe to unplug the device from the PC
Let the phone boot.
Click to expand...
Click to collapse
I've only done these steps and CWM isn't my recovery even though it says it passed,I'm still on stock recovery.
Do I continue with flashing SU?
I have the SCH-R960.
Any speedy replies most appreciated.
Anyone here tried to use this method to root the model SGH-I527M for Canadian version 4.4.2 yet ? Thanks
Someone reply fast if possible ... I have a person trying to sell me a us cellular mega ... Any Roms work with it ? Can straight talk work with it ? Asap answer will be appreciated.. Lady has 2 wanting to sell for 100 a piece .. I haven't had this device In a while so I see a good investment with this
Sent from my LG-E980 using XDA Free mobile app
lehuutai130 said:
Anyone here tried to use this method to root the model SGH-I527M for Canadian version 4.4.2 yet ? Thanks
Click to expand...
Click to collapse
i tried everything is fine but the SU cannot be updated since my phone wifi is not functional ...
Can't get it to work
I have tried this but to no avail, the update fails to verify every time even following the directions given to the T.
straight talk will not work with u s cellular phone. And there are no roms for the mega that I am aware of.
This method work with other galaxy mega 4.4.2 different carrier ?
Question this work for mega i527 4.4.2
I was told that for Galaxy Mega Sprint L600, root and SIM unlock is only possible if Android version is 4.2.2. Now my question is, does this method work for L600 that's on Android 4.4.2 too?