Hi all. This is my first thread. Plz to comment my mistakes.
Many Oppo R1L user look for guide how to root this phone. Well i hope i help those guys.
Guide:
1. download Vroot the english version a the homepage
2. install the setup.
3. open it.
4. turn on adb debugging in your phone. you must in developer mode to turn this on. so, anyone don't know how to do it, try to google on how to enable developer mode in android 4.3.x
5. after that done, connects your phone to your computer and let the iRoot app installing the deamon. then click Root on the green tab at the bottom right.
6. wait until it done and asked you want to re-root the phone.
7. finally unplug your phone and check your root access with Root Checker app in Play Store.
8. if it says has root access, the you root process had succeed. yay !
REMEMBER THIS>>>I"M NOT RESPONSIBLE IF ANYTHING HAPPENED AT YOUR PHONE. DO AT YOUR OWN RISK.
THANK YOU !
Related
Development for CWM for this device has begun!
Head over here to lend a hand, or just check it out
Hello huawei users, and welcome to my second 'Root your mediapad 7 youth' thread
Find the original one here
The only difference between this thread and the one linked above is the tool used
This one uses Kingo Android root(English), while the one in the other thread uses Vroot(Chinese)
Of the two, I believe Kingo root is easier to use, as it has step by step instructions in English
DISCLAIMER
1.Neither me nor Kingo is in anyway responsible for anything that does or does not happen to your device as a result of following these instructions. This includes but is not limited to: bricking your device, abnormal functioning of your device and voiding of warranty. Continuing with this guide is accepting these terms.
2. Rooting your device will most likely void your warranty. You have been warned.
3. This guide is intended solely for the device mentioned in the title. It is not meant for use with any other device, and may have unwanted effects.
That being said, let's get on with it
Prerequisites
1. Fully charged PC
2. Fully charged Huawei Mediapad 7 Youth (s7-701u)
3. Kingo Android Root. Find at this link
4. USB cable
Steps
1. Install and setup Kingo
There is a simple, standard windows wizard to follow. Nothing complicated.
2. Plug in your device into your PC
At this point, make sure kingo is open
3. Follow the on-screen instructions
These include enabling USB Debugging, clearly demonstrated on-screen
When it's done rooting, it will reboot, and you are rooted with SuperSU installed.
It's really that simple.
It didn't work
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
root failed
i tried those steps but it shows root failed. please help
huawei s7-721u root
I'm having huawei s7-721u model type..and i have rooted it..i need to install a new rom to it. can u tell me how ...anything text me through my whatsapp +60149447355 or mail me to my fb Yoges Waran Vasudavan.tx
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
whhw31 said:
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
Click to expand...
Click to collapse
fayaz faiyu said:
i tried those steps but it shows root failed. please help
Click to expand...
Click to collapse
I'm sorry to hear that you couldn't root your devices
Run through this FAQ to see if your computer and device are in the same config as mine
1. Do you have the Android SDK installed?
If not, go here : https://developer.android.com/sdk/installing/index.html and choose the 'eclipse ADT' option
2. Do you have the Java Development Kit Installed?
If not, go here : http://docs.oracle.com/cd/E19182-01/820-7851/inst_cli_jdk_javahome_t/index.html and follow the instructions
3. Do you have ADB configured?
If not, go here : http://androidcentral.us/2013/08/how-to-install-android-adb-and-fastboot-on-windows/
If following the above steps still does not help, PM me, hang in there, and I'll try to get back to you :good:.
@whhw31 I'm surprised that neither Kingo nor Vroot worked for you . I'll look ino this and see what I can come up with.
I'm working on a cwm port, but i am not done yet. I will alert you all when i successfully port it :laugh:.
When that is done, flashing SuperSu.apk + supersu should be a piece of cake .
Till then, just hang in there a little longer.
Success????
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
its normal??? really successful roots????
---------- Post added at 06:06 PM ---------- Previous post was at 06:01 PM ----------
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
Lastly shown ROOTS Status: NO
its normal??? really successful roots????
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
ashwanid said:
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
Click to expand...
Click to collapse
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Please try installing Towelroot on your device and using it to obtain root. It will root many Kitkat devices.... uses a few different exploits to achieve root access.
There is a LifeHacker thread on it here: http://bit.ly/1qAobRl
I tried baudi root to root my device. The Chinese superuser is installed but there is no root access. And that superuser apk made my tablet sluggish. Can u tell how to remove the superuser.apk. my tab isn't rooted.
And towel root and many other apps doesn't work.
Thanks
And I want to tell that first I installed kingroot and my tab was rooted. But game killer was not working then I unrooted . then again tried with baudi root but It made my tab sluggish.
Please help to remove that superuser
Download the latest kingroot.
uttam27 said:
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Click to expand...
Click to collapse
I could get into fastboot mode through adb command "reboot bootloader". However, fastboot screen is blank with only "Fastboot=>" mentioned at bottom left of screen. In bootloader mode device is recognized as "mtk6582_phone". I don't have the phone ROM file that could have been used to create custom CWM recovery and without root I cannot backup the phone ROM. One-click root methods fail. Any ideas?
Try to root with kingroot it rooted this device.
Download the latest version of this app.
ashwanid said:
Try to root with kingroot it rooted this device.
Download the latest version of this app.
Click to expand...
Click to collapse
I am little skeptical about using methods that are not well-known. You mentioned you faced some issues after this..?
I tried Kingo but it failed
I said to use kingroot and not Kingo root. Download it here kingroot.net
So here's the long awaited root!!!
Just use the following root tool. I just Used it myself
Its called root genius
Download it here
htt p :// downloa d1766 . mediafire .com /9g59 3gbw8bjg/j17ivc iz1x808wo/RootGen ius_v2.3.0.zip
Just backspace the spaces in the link and copy it to the address bar of your browser then press enter to download the file.
This is because i couldn't post a link
I am sure this works fine
it worked fine for me
Connect the Tablet to your pc and click on root
That's it
Congratulations! You have rooted your tablet...
Hope this Helps
Regards
Adarsh Mathai
Just use iroot (also known as vroot) Easy steps starts here:
1. DOWNLOAD iroot /vroot
2.Use ur usb cable and connect ur phone to pc
3. Put ur phone in usb debugging mode available in developer option
4. IF u dont have developer option then go to setting->about phone and continously click build number till you get notified.
5. And open vroot and let it detect ur phone. It will ask permission so give permission from ur tablet. It will download and install some drivers.
6. U can see there is a option to root ur phone go ahead and click it
7. Ur tablet may restart so don't. Pannic
Volla rooted ur iball
Hey Guys,
So I just bought a brand new ZTE V5 Max and upon receiving found out that it didn't have GAPPS installed which I heaily use those apps so I went down the route of figuring out what was needed to install GAPPS. Please keep in mind I'm writing this to help fellow users of this phone so they don't have to go through the teadious research and chinese translations, I will not be held accountable for anything that goes wrong with your device when doing the below process, I just know it worked perfectly fine for me:
Step 1: Enable Debugging Mode
Head to Settings > About Phone > tap Build Number 8 times or something > Now go Back to settings and tap More > Developer Options > Enable USB Debugging.
Step 2: Install Drivers
Plug in your phone and install the AutoRun.exe that appears in the virtual CD drive (shows up when youplug the phone in)
Once you have installed the drivers verify in Device manager that all devices relating to the phone are installed and there's no unknow devices.
Step 3: Root the Phone and install CWM (Chinese Version sorry but the bits that are needed have english written )
Download the Rooting and Custom Recovery tool here -- drive.google.com/file/d/0B8qJPucQA8GkQy1uTk93dUNuMkE/view?usp=sharing
Unzip and double click on the ZTE-V5-MAX-TOOL.exe
It should come up and ask for a password enter the following (no spaces in the password had too due to XDA posting rules) - www . ydss . cn
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 3 which will install the Custom Recover CWM
Once again press any key and it will begin installing the custom recovery
Once complete you should see sucess.
Reboot the Phone and go to Settings > About Phone > System Updates > Recovery and it should boot to Recovery CWM if it does yay.
Step 4: Installing Gapps
Reboot the phone
Install ES File Explore and give it Superuser Access
Now go to the uper directoy and tap and hold on the System folder then view the details.
You'll need around 150mb free space in there to be able to install GAPPS, I had to install an app called "Uninstall" (red coloured trash can). I then uninstalled the following : Easy Mode, Handbook (as it's chinese), neoshare, nubia Niudun, Nubia PlatLogo, Nubia Poster and Video Sample.
I then had enough room.
Now download Micro Gapps (Go to drive.google.com/folderview?id=0B1T7tp6tJ_3kQkZSWjNsazJZbGc&usp=sharing
Then click on "1.10 update_gapps" then "pa_gapps-modular-m" and download it. Then put it in the root directory of you Phone Storage.
Now reboot into recovery (Settings > About Phone > System Updates > Recovery)
Go to the second Option in Recovery called "***** Zip**) and browse to the phones storae and install the Zip.
If sucessfull go back to the main menu of Recovery and go down to the (****Cache**) option and select, then select it again to confirm.
Once complete go back to the Main menu again and choose the top option to reboot.
Walla your done.
Website I for info: shuajizhijia.com/jiaocheng/9170.html&prev=search then use translate in Google.
Have fun guys.
Have fun guys, and keep in mind I probaly wont reply if you ask for help as I have a day job
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 2 which will install the Custom Recover CWM
Click to expand...
Click to collapse
Hi m8, I'm still waiting for my phone, seems it will take a wile, as I don't have confirmation yet of shipping.
Now, I was reading what you posted above and I have to thank you for the mini tut, but I marked in red two lines that I'm quite confuse... Can you confirm that please?
Hey Mate,
I've fixed that up now good pickup
Cheers Eric
i got my phone with root without cwm
and found that playstore didnt worked, it has 4.4.4 version
any suggest?
Simply Skip these steps:
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
very very useful
Dear Frenchie
I would like to express my sincere thanks for your magnificent manual
It has been very very extremely truly helpful for me
I can't express how much I feel grateful for you, this solved a problem that ruined my life
The manual is very accurate and detailed
Thanks very much
unable to add google account
Hi, I have just received my new ZTE Max 5 and I've spent all evening trying to set up my google account. The phone has google play store installed but I cannot install any apps because I cannot establish my google account. Every time I try to set up the account it says "there was a problem communicating with google servers". Any ideas? (I have disabled 2 google 2 step verification).
Can't turn on my phone
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
patseho said:
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
Click to expand...
Click to collapse
You said you have the "ZTE V5 Pro". Maybe that is just a typo, but this thread is about the "ZTE V5 Max", so be careful about what you do.
You can try looking at this post and see if it is helpful to you: http://forum.xda-developers.com/and...alcom-2-gb-t2965623/post63005167#post63005167
But you must make your own assessment and take responsibility for the outcome if it is not the right thing to do for your phone.
I just want the GAPPS zip File.
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Sicnarf26 said:
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Click to expand...
Click to collapse
See the instructions (author has since updated) at
http://click.xda-developers.com/api...Touch Pop S3</b> 5050 | Every Android version
and the second page comments for recovery hints. TWRP requires some study and preparation before use so it's not good to be stuck when attempting recovery.
Note the comment on the 3rd page about the updated recovery image that lets you see what you are doing on the screen. For me I got it working, working in the dark (ie. not seeing anything on screen), so it's too early for a video tutorial.
Please Help me :/
When i use the .cmd, i put /storage/sdcard0 or /storage/sdcard1
I have a message :
''The specified path was not found''
Rooting using Kingo Root
Rooting nowadays is very simple.
But the easiest way to do it is the following:
1. Download Kingo Root for Windows, Mac or Linux;
2. Install Kingo Root;
3. Open the program;
4. Connect your phone to your pc through USB cable and wait for Kingo Root recognize it;
5. If your phone is rootable it will appear a button saying "ROOT", click there (If your device is not rootable then you are out of luck and you must try another method)
6. Don't remove your phone and don't click anywhere, wait until the rooting process is finished;
7. After this your phone should reboot, it means you are now rooted (If your phone did'nt rebooted, manually reboot it then);
8. Enjoy!
Note: Rooting will void the device's warranty, root at your own risk.
Download the phone's drivers if needed and disable Windows, Mac or Linux firewall if needed.
Hope it works for you!
Link for Kingo Root: kingoapp.com
Sir
Pls give a method to root lyf water 9 without pc Android version 5.1
Easy steps to root LYF Water 9:
Step 1: First of all unlock bootloader and enable developer option and USB Debugging mode on your Android device by This guide.
Step 2: Download and install this root App on your phone. When you tab on this app for install then you will get a pop tab for enable Unknown Source option, So tap on setting and open Security tab then scroll down and find Unknown Source option, tick the check-box for enable Unknown Source option and install this app.
How to unroot LYF Water 9:
It is must for you to know that how to unroot your phone or device. When you don’t want rooted phone, then you can easily unroot your phone by these simple and easy steps to unroot LYF Water 9.
Step: First of all, uninstall KingRoot app and Purify Chinese language app(see in image 1). Now open Kinguser app then tap on right cone gear icon (setting button). You will see Root authorization setting, tap on it (see in image 4). Now find Remove Root permission option then tap on it (see in image 4). You will get a popup tab on your phone screen for removing root authorization, now tap on clear button then unroot process start now. That’s all, now your LYF Water 9 is unrooted.
Root LYF Water 9
Step 3: After install Kingroot app, you must disable Unknown Source option from setting. Now run Internet via WiFi or Mobile Data and Open application menu in your phone then find and open Kingroot app.
Step 4: Now you will see, the kingroot app verify your root status, then you will see a blue button for start root on your phone screen. Tap on this blue button for root your phone, it takes few minutes to root your phone(see in this image). After root you will see a green circle with right symbol (see in the image). After root your phone will reboot automatically. Now your phone is rooted. If you want to check your Mobile rooted or not try this app Root checker.
See, Unlocking the Bootloader is not necessary in case if you want to root your device but not going to do any kind of Custom Flashing of Recoveries or Firmwares.
You Can Easily root your Device without unlocking bootloader as it will wipe your data after it will get unlock because of android policies defined by Google.
Use kingroot for root.:laugh:
Hit Thanks Please if helped.
Thank you sir
But root is still not work.can you give me the kingroot version to root this phone.pls bcz there are too much kingroot but no one can work...
Lyf water 9
Android version 5.1
Sir, but which version of kingroot should I use
I am unable to update my phone via ota updates .
Recently I rooted my Lyf water 9 and remove some bloatware . but now during update installations I seen message of ERROR . Please help me .
Also tell that how to install twrp recovery and from where I can download it ?
ravismeet said:
I am unable to update my phone via ota updates .
Recently I rooted my Lyf water 9 and remove some bloatware . but now during update installations I seen message of ERROR . Please help me .
Also tell that how to install twrp recovery and from where I can download it ?
Click to expand...
Click to collapse
How Did You Root Your Lyf Water 9. Can You Please Tell.
There are potential dangers.