Hi to everyone (especially to devs),
I was porting lollipop from N9005( with note 4 stuff) to i9506, but I have some problems with the wifi.
I tried to replace the wifi drivers from /vendor/firmware and /etc/wifi but still IT WON'T OPEN!!!!
Everything else is working ok
Any idea?
Thanks
Related
Dear friends, I've two identic tab allwinner a13. One of this all works fine, in the other wifi don't work properly! So I change ROM and now wifi work fine, but g-sensor no!
My question is: is there a way to copy driver from the other tablet to make this work wifi and g-sensor? Is driver or kernel problem?
Thanks
Hello
I'm trying to use wifi tether on my SE Xperia Neo V with Suave kernel and Ultimate HD 3.0.2.
Once setup is done and hotspot activated, I can connect my laptop and tablet to the wifi but there's no internet connection.
I've tried various combination of kernel and custom ROM (all based on sony's ROM) but ended up with the same result.
However, it did work with Cyanogenmod back when I was using it.
So, I'm guessing it might be because of sony's ROM, could anyone confirm that ?
Is there a fix ?
Does anyone managed to make it work ? with what kernel and what ROM ?
Any help would be appreciated.
thx
Also, it works on Cyanogenmod Nightly 10...
cippa lippa said:
strange.. with stock Rom could you tether?
Click to expand...
Click to collapse
Yes, as far as I remember. But I then changed for cyanogenmod, then to another provider that didn't support tethering.
I just noticed that now that I changed for another provider...
anyone ?!
LubY1978 said:
Click to expand...
Click to collapse
Yes, you'll get your 10 posts...
OK, I've tested many ROMs and none of the Sony .587 based ROM worked (the roms are working but not the tethering). Not with wifi nor bluetooth.
I've tried many things and only cyanogenmod works on that departement.
It has to be system related because all the apps I've tried (barnacle and such) didn't work either and some even caused the phone to reboot.
Also barnacle says WIFI: could not set ad-hoc mode of wlan0: Device ore resource busy
anyone ?
OK, I've found a solution.
After many tests and research, it seems to be specific to SFR french carrier and android 4.X (no wonder it was working for nearly everybody but me...).
The thread with the answer is http://forum.xda-developers.com/showthread.php?t=1544063
Now, it needs to be done once the hotspot is activated and it will keep working as long as you don't reboot your device.
Would there be a way to "integrate" that in the ROM to make it automatique somehow ?
Anyone ?
Ok, anyone knows how to make the iptables parameters permanent in android ?
Good evening,
I´ve got a problem with CM 11. I just updatet it to this version (from 10.2) and want use my VPN at home (fritzbox).
My Phone connect to my fritz Box successful, but than my fritzbox dont receive any data.
I had that problem with 10.2 already. But now I would like to know why my VPN dont work (On 10.1 it works very well)
It is a problem with my configs? ( On other devices without CM it works), Or are some binaries missing?
I use VPNCilla - a No-IP Adress and a fritzbox 6360- Unitymedia.
Sorry for my bad english but i hope that you can help me.
Thank you for your help.
Cant someone help?
I try to connect on my nexus tablet ( 4.4.2) and it works
Hi,
i have the same problem using an i9305 with cm11 nightly build from 5th january. I cant connect to vpn of my fritzbox. Earlier i used vpnc widget on my old i9001 galaxy s plus but now on the i9305 i wanted to try onboard vpn from cm11 but i always get disconnected. I tried to connect using vpncilla trial and it works with the first try
Is there a logfile i can look at why it doesnt establish the vpn connection using the normal cm11 build-in vpn ?
best regards,
Thomas
tiebiex said:
Good evening,
I´ve got a problem with CM 11. I just updatet it to this version (from 10.2) and want use my VPN at home (fritzbox).
My Phone connect to my fritz Box successful, but than my fritzbox dont receive any data.
I had that problem with 10.2 already. But now I would like to know why my VPN dont work (On 10.1 it works very well)
It is a problem with my configs? ( On other devices without CM it works), Or are some binaries missing?
I use VPNCilla - a No-IP Adress and a fritzbox 6360- Unitymedia.
Sorry for my bad english but i hope that you can help me.
Thank you for your help.
Click to expand...
Click to collapse
Check my Post
http://forum.xda-developers.com/oppo-n1/help/how-to-fix-vpn-cm11-m8-t2814157
Last month I'm trying to build my own CM12 for GT-I9060 Samsung Grand Neo device. I have built it successfully (with pawitp i9082 compat patches) and flashed it to my device. Everything seems to work great, Wifi, camera, etc. Baseband version was recognized too, and I got my signal. However I didn't get any mobile data, even if I change the APN type. Another problem was during the call I didn't get any sound at all. There must be something wrong with incall audio, but I don't know how to fix it. Can someone guide me which file or how do I fix it?
Here's the link to radio logcat: pastebin.com/8CgGM7Lg and pastebin.com/bic27Rwk
and here's the main logcat pastebin.com/MmAASyLR
Thanks in advance!
Hi everyone,
few days ago i've started reading about porting ROMs to different devices because i have free time and i'm interested in such stuff. I've successfully ported a CM12 based ROM (resurrection remix, lollipop 5.1.1.) to my MT6582 UMI C1. But the problem that i'm facing is that the GPS isn't functional. It works fine if i use WIFI assisted GPS (battery saving or high accuracy option) but when i use the device's GPS (device only option) it just won't get a fix. I've used GPS test app to check what's happening, and all 'i see' is 9-13 satellites but none is actually being locked onto. Also CM12 doesn't have com.mediatek.lbs.em (location based services) or YGPS.apk. I've tried 4-5 custom ROMs and none of them had those apps. Kitkat did have those and i was able to check the SNR of the GPS reception per satellite.
In previous ROM (kitkat 4.4.2) GPS worked very good, especially when i've installed modified gps.conf into /system/etc
I was able to get a lock within seconds.
SO...
I've ported zImage (a.k.a. kernel?) from stock boot.img to port boot.img, compiled it and done few other file replacements in port ROM to make my ROM working.
I am not a programmer or a coder. All I do is read/copy/paste/ and enjoy what I've done. I don't sell the stuff I do. It's all just for me. But I can (and know how to) use notepad++ to replace lines in ROM's files so if you know a solution please share it with me :fingers-crossed:
So far all stock ROMs for my phone (UMI C1) are missing all files in /system/lib/modules and i've read that i should replace mtk_stp_gps.ko from PORT with one that is located in STOCK. So there has to be another fix, my phone worked fine without it.
Thanks in advance and i hope we'll find a solution.
Got the same problem porting MIUI 7 / 8 to mtk 6582. Have you found a solution?