Model: Samsung SCH-I500.
Phone powers up, I can hear beeps from incoming messages, this tells me its functioning but the display does not work. Totally black screen. I do not believe it registers touch anymore either.
When the display worked, and I connected the USB, it would prompt to enable "USB" access or something like that. However, with the screen being blacked out and I'm assuming non-responsive to touch, is there anyway to bypass this step to retrieve my photos via USB?
When I connect, it does appear on my laptop as "Removable Disk F:" but when I click it it says "Please insert Removable Disk F"
The four symbols at the bottom of the phone do light up and appear to register when i touch them.
Any help would be appreciated.
Related
Yesterday I dropped my Galaxy S3 GT-I9300 softly on the floor, but immediately I noticed that there was a problem with the screen: the glass was not broken, but colours were abnormally green, with a horizontal white line at the top of the screen, and a little circular dead zone in the upper left corner. I could still use it. But a few hours later, the light intensity of the screen had progressively and drastically decreased, and the phone could no longer be used. Today, the screen is totally black…
All data was saved on the external card, and I thought that Gmail synchronization would have saved my agenda. So initially, it did not seem like a too big problem, except for the cost of screen replacement, but when I realized that my calendar synchronization had not been not properly configured, the problem suddenly became more serious! My main problem is now data, not screen!
When the phone is on, and connected to my PC via an USB cable, I can only access two folders on the phone: “Card” and “Phone” (the external card is still in the phone). I have the original ROM, the phone is not rooted.
Do you think that my calendar data is there somewhere? I don’t know where to find it.
I’m afraid that all data will be lost if I send back my phone to the reseller's after sales service.
Alternatively, is there a mean, with an HDMI adapter and an external screen, to use the phone anyway: only the display does not work, the rest of the phone seems OK. The touch screen still worked fine yesterday, when I could still see something. Will I see anything on the TV when touching the phone screen? It would be wonderful if I could just reconfigure my synchronization, in spite of that black screen, and thus recover my agenda data via my Gmail account, before sending the phone to the after sales service.
Any suggestions are welcome.
Search exact same question been asked before and i believe a workaround was found .
jje
You can use ADB to make a backup of all your apps + data. However USB Debugging must be enabled for this to work. Is it enabled on your device?
If yes, there are a lot of guides on how to backup your phone`s content such as Apps + Data.
One such guide is this: http://www.thesuperusersguide.com/adb-backup--restore.html
No, I had not activated "ADB debugging" and without screen, it seems a little bit difficult to do it now, thus precluding "ADB" use. That's why I was wondering if there was a possibility to use the phone with an external screen via a MHL-HDMI adapter, assuming the touch screen still works… Any idea?
yes, just do that. you can also access adb from recovery without having to enable anything
I am now pretty sure that touch screen is OK. Even if I don't see anything, swiping the screen to unlock it produces the usual sound. So I won’t do anything until I get a MHL HDMI adapter. I think it is the simplest way, if that works… I keep you informed in a few days. Many thanks
Hi everyone
This morning my Galaxy Note III fell on the floor and ever since its display seems completely broken (its not split or anything, but it remains black after restart and its impossible to unlock it as the touch screen doesn't respond anymore). I already have a new phone but the problem is that I want to save all data like pictures and whatsapp histories not being on the SD card. I tried to connect with ADB but it keeps saying that the device is not authorized. Usually one needs to confirm on the Galaxy when connecting with ADB. But know, as the touchscreen seems dead, thats not an option anymore :-/
The phone seems still perfectly operable otherwise.
Is the any chance to access the phone??
Best regards
Samuel
I already tried to connect an external mice using USB OTG. It seems to work, at least the lights beam up, when I move the mouse around.
Unfortunately, I do not get any feedback on whether the phone is unlocked or not and of course, I don't see the curser as the screen is black :-/
Hey xda--
Here's the story: my friend's phone has a broken screen, as in, the screen works, but touch doesn't. So I can see everything fine, but I can't tap on anything.
The ultimate goal is to get a screenshot of a certain thread of SMS messages. It's the only thing she cares about at the moment. I was thinking ADB would be perfect since I can just simulate screen taps, but my PC isn't authorized on her phone for ADB. USB Debugging is enabled, and her phone is actually rooted. But it was rooted by her brother and he lives in a different country.
We can get into her recovery (clockworkmod), but obviously there's no way from there to view SMS messages. Is there any way to simulate screen presses aside from using ADB? Or, is there any way at all to authorize ADB without being able to tap the screen? I can see the prompt come up to authorize my PC, but I just can't tap "Accept".
Hi
My screen is damaged (black) and unable to use touch.
I just want to backup all my data.
I bought an OTG cable, and put a torch to the screen.
After 30 minutes of tracking lines and dots I was able to unlock the pattern password.
I plugged in the phone to the PC, but then dialogue message asks to choose between charging and file transfer.
Obviously I can't do this as I unplugged the OTG cable.
I tried various remote control apps over wi-fi but none work, my SD card slot is missing so can't go that way.
I'm stuck on something so simple, please anyone know how to get past this?
Found another app to remotely transfer directory/files over wifi
Hello folks, my display broke suddenly, cannot see anything except a line and some green flickering when display is on. I have most of the documents and everything stored on my SD card but the Whatsapp data is unfortunately not backed up. There are a few pictures and chat data that I would need to access from there.
The situation is like this - Display broke but the phone works also touch apparently works too since Double tap makes the display light up in green (cannot see anything), and double tapping again makes the screen off. There are notifications coming. USB charging works. Shows up on the PC but the MTP won't show anything since screen is locked. I rebooted the phone which was the mistake !! because now it asks for pattern. I cannot unlock this, tried blind so many times but since I disabled the vibration. It's hard to get the pattern. Fingerprint scanner works but it won't unlock with it (so it just vibrates saying need to use pattern on screen due to reboot, the usual behavior)
Phone specs and OS are in my sig - Stock OS, Rooted, TWRP.
Can anyone please help if there's any way to access the filesystem ? It would be great if there's a way for accessing the data. My other request would be, can I make a data backup of the ROM as is with LGUP ? then reset it all before sending to LG for a full repair as I like this phone a lot.
Thank you for your time.
boot to twrp and then plug it in on PC and browse the file there? if you cant go to recovery from power off, maybe go to fastboot first then do the command to go to recovery.
figure out how to cast the display on a tv? i think the usb port supports HDMI output so maybe plugging it to a tv would work.