OK So... I decided to root my TF103c (K010) so I remove some of the stupid crapware that asus has installed and I gained root fine and went ahead and started removing stuff. But apparently I removed something I shouldn't have and now I'm constantly getting Asus Services has stopped messages and I can't actually do anything with the damn thing. Because it has such a crap locked down recovery and bootloader etc. I can't seem to find any easy way around this. As in I can't just load all the things I uninstalled from the backups because I can't use ADB with the device. (Yes it WAS turned on in the settings until I formatted cache and data in case that might fix it... it didn't)
Does anybody have any advice?? Coz I'm stumped...
fastboot
RaVe-N said:
OK So... I decided to root my TF103c (K010) so I remove some of the stupid crapware that asus has installed and I gained root fine and went ahead and started removing stuff. But apparently I removed something I shouldn't have and now I'm constantly getting Asus Services has stopped messages and I can't actually do anything with the damn thing. Because it has such a crap locked down recovery and bootloader etc. I can't seem to find any easy way around this. As in I can't just load all the things I uninstalled from the backups because I can't use ADB with the device. (Yes it WAS turned on in the settings until I formatted cache and data in case that might fix it... it didn't)
Does anybody have any advice?? Coz I'm stumped...
Click to expand...
Click to collapse
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
Click to expand...
Click to collapse
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
---------- Post added at 12:26 PM ---------- Previous post was at 12:19 PM ----------
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
Click to expand...
Click to collapse
Well what i did was flash a recovery not compatible with my k010 but this did not stop me from booting to droidboot however my stock recovery for now is gone . my device was doing this too had about minute or so once powered on till it crashed. MY BLUETOOTH Went out and in my settings the on off would slide back and forth till it crashed but best buy sold me a 40$ one year warranty SUCKERS and asus installed a new one
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
---------- Post added at 12:26 PM ---------- Previous post was at 12:19 PM ----------
Well what i did was flash a recovery not compatible with my k010 but this did not stop me from booting to droidboot however my stock recovery for now is gone . my device was doing this too had about minute or so once powered on till it crashed. MY BLUETOOTH Went out and in my settings the on off would slide back and forth till it crashed but best buy sold me a 40$ one year warranty SUCKERS and asus installed a new one
Click to expand...
Click to collapse
Thanks for the reply.
I have a adb and fastboot but most of the commands just don't work. I tried to remotely install apks but that fails. I tried to side load the latest FW downloaded from ASUS but it fails the certificate check. Basically I'm just waiting for the next system update to come OTA and I'll try flashing that... No idea when that will be of course...
Thanks for trying to help though.
Flashing Firmware using DROIDBOOT:
Instructions: https://drive.google.com/file/d/0B_JkvfrnO7pXMzVaZEM5OFF2ZGM/view
Download: https://yadi.sk/d/fduOPFuhes3dC or https://drive.google.com/file/d/0B_JkvfrnO7pXSHc1RGhzak1DN2c/view
(Fastboot incudled, partitions images in .img format, adb incudled, but not needed)
i dont have runned update_image.bat. i needed only recovery and system.
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash recovery recovery.img
fastboot flash system system.img
but you need to find some fastboot drivers for tablet.
i have used intel soc. drivers. but yet i dont have download link.
just google search to TF103C fastboot/driodboot drivers.
where's firmware
RaVe-N said:
Thanks for the reply.
I have a adb and fastboot but most of the commands just don't work. I tried to remotely install apks but that fails. I tried to side load the latest FW downloaded from ASUS but it fails the certificate check. Basically I'm just waiting for the next system update to come OTA and I'll try flashing that... No idea when that will be of course...
Thanks for trying to help though.
Click to expand...
Click to collapse
whare did you find firmware on asus site. i go to support and all i see is Kernel Code and manuals.
---------- Post added at 03:00 PM ---------- Previous post was at 02:55 PM ----------
Ok I fastboot flash 2.2.33.138. with no help from asus. but jacky_cao <[email protected]> got this reply i suggest you to contact the RMA center again . they will help you to update the firmware to (FW_WW_TF103C-2.2.33.144-release-user-20150827-signed.zip ) manually. But can't tell me how to contact anybody to help do that. does anybody here have the files needed to ota up to 144?
Guys, I followed the instructions from gouster3, but my Asus still hangs up during the boot. I just see the logo ASUS In search of incredible and that is it.
I too had a problem having foolishly erased an apparently needed system app after rooting. After many hours off and on of trying to sideload the latest firmware from ASUS i finally found this thread and success.
1) Of course put device in DROIDboot (fastboot). From power off, reboot tablet holding power + vol up for 2-3 seconds.
Per Post #4
[Cannot post url due to restrictions, get links from post #4. use the 2nd link in post, first link is dead]
(Fastboot included, partitions images in .img format, adb included, but not needed)
unpack zip and launch adb. (i already had an install of minimal adb and fastboot so I only moved boot, recovery, system, droidboot, flash, partition.tbl and AS-TF103C-v67.43-capsule.bin to that folder and launched from there. In hindsight I only probably needed system, flash, partition and capsule and might not have needed anything but system...)
fastboot erase system
fastboot flash system system.img
This takes a few minutes in which it appears nothing is happening... and then system is sent in 3 chunks.
Upon launch process.google.apps or something kept crashing and I could not log into google, but a reset from within the OS fixed that and I was back in business. I probably should have loaded recovery and cleared the cache and such and then rebooted, but i got hasty.
Anyway I know this is an old problem and people have probably moved onto other things, but for someone like me who has had this once wonderful device sitting around waiting for a new breathe of life and the energy to take another stab at it out, don't give up. And thanks to all the gurus here for all the help over the years...
gouster3 said:
Flashing Firmware using DROIDBOOT:
Instructions: https://drive.google.com/file/d/0B_JkvfrnO7pXMzVaZEM5OFF2ZGM/view
Download: https://yadi.sk/d/fduOPFuhes3dC or https://drive.google.com/file/d/0B_JkvfrnO7pXSHc1RGhzak1DN2c/view
(Fastboot incudled, partitions images in .img format, adb incudled, but not needed)
i dont have runned update_image.bat. i needed only recovery and system.
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash recovery recovery.img
fastboot flash system system.img
but you need to find some fastboot drivers for tablet.
i have used intel soc. drivers. but yet i dont have download link.
just google search to TF103C fastboot/driodboot drivers.
Click to expand...
Click to collapse
THANKS I bricked my tf103c and this fixed it and got it working again
Do you have any easy guide on installing a custom rom to this device in this way?
I use Zenfonerootkit_20150528 to root the device and it works fine
I just can never find a rom or such or guide on this :/ ( i found this old device and thought i would have a mess with it)
I
Hello everyone
I hope you all are around I really need your help at it again, I have got an asus tf 103c i tried to root it and now I get a bootloop i tried everything but failed. Please I know you will be angry because you already explained everything but I am a verry beginner and also many links are dead I need your help.
Thank you from advance
Related
I'm trying to update my G Watch by sideloading a zip file.
I installed the sdk tools and usb driver as usual.
On debugging mode and bootloader, the watch is detected as an ADB device normally. 'adb devices' command works.
But when I reboot and get on recovery mode, the watch disappears on the device manager and never get detected again. So I cannot use 'adb sideload' command.
I've never experienced this kind of issue with smartphones.
Do you have any solutions?
osikiri said:
I'm trying to update my G Watch by sideloading a zip file.
I installed the sdk tools and usb driver as usual.
On debugging mode and bootloader, the watch is detected as an ADB device normally. 'adb devices' command works.
But when I reboot and get on recovery mode, the watch disappears on the device manager and never get detected again. So I cannot use 'adb sideload' command.
I've never experienced this kind of issue with smartphones.
Do you have any solutions?
Click to expand...
Click to collapse
My watch is now bricked because I have no way to get out of "adb sideload" mode...how did you get out of that mode? please tell me.
TjPhysicist said:
My watch is now bricked because I have no way to get out of "adb sideload" mode...how did you get out of that mode? please tell me.
Click to expand...
Click to collapse
I pushed the reset button on the back(the silver one right above the charging connectors) with a pen for about 10 seconds, and it rebooted.
osikiri said:
I pushed the reset button on the back(the silver one right above the charging connectors) with a pen for about 10 seconds, and it rebooted.
Click to expand...
Click to collapse
Wow ok, that's a LOT longer than I'm used to with other devices...THANK GOD I thought I had bricked it completely.
Anyway, now i have to figure out a way to get adb to work in sideload,...i mean CLEARLY it's possible lots of others doing it..
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
TjPhysicist said:
Wow ok, that's a LOT longer than I'm used to with other devices...THANK GOD I thought I had bricked it completely.
Anyway, now i have to figure out a way to get adb to work in sideload,...i mean CLEARLY it's possible lots of others doing it..
Click to expand...
Click to collapse
Ok, does anyone know how to get my computer to recognise my watch in recovery mode? It's not about 'driver' the computer plain doesn't recognise that anything is plugged in at all.
I know the post is quite old already, but I experience exactly the same phenomenon...
I tried multiple PCs Linux and Windows,but non of them recognized the watch (neither on 4.4W1 nor on 4.2W2).
Anyone any idea?
Wikiwix said:
I know the post is quite old already, but I experience exactly the same phenomenon...
I tried multiple PCs Linux and Windows,but non of them recognized the watch (neither on 4.4W1 nor on 4.2W2).
Anyone any idea?
Click to expand...
Click to collapse
I believe u need to update the drivers.....I always go-to device manager...update driver..hit select from list..and choose android adb....
Sent from my LGLS990 using XDA Free mobile app
mrkrabs said:
I believe u need to update the drivers.....I always go-to device manager...update driver..hit select from list..and choose android adb....
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
The problem, as @osikiri stated, is that the device does not get recognized at all (no unknown devices in devicemanager and the sound that comes on plugging in a device does not come as well). Furthermore, afaik Linux does not even need any drivers
Had the same issue today... and the only way out way battery death and recharge
JaceAlvejetti said:
Had the same issue today... and the only way out way battery death and recharge
Click to expand...
Click to collapse
If this really helps (seems weird): I guess the exact setting could be necassary:
You simply ran out of battery while the watch was running(not recovery or fastboot) and then plugged it in and went directly (or not?) to the recovery?
Thanks in advance, would be really great to fix this!
Anyone ever find a fix to this? I'm trying to manually install the 5.0 update and I'm having the same issue. Every post I find with search tells me to update drivers but I'm on a Mac that doesn't even use ADB drivers. I've updated the SDK.
MSigler said:
Anyone ever find a fix to this? I'm trying to manually install the 5.0 update and I'm having the same issue. Every post I find with search tells me to update drivers but I'm on a Mac that doesn't even use ADB drivers. I've updated the SDK.
Click to expand...
Click to collapse
I'm doing the same thing and having the same issues!
Yeah, same issue for me as described.
Windows (Win7 x64 for me) doesn't even realise that the device is connected when it is in recovery mode. Although it will connected properly when booted normally.
+1 Any ideas?
Same issue for me. I've tried removing and replacing it on the cradle, killing and restarting the adb server, entering recovery by the touchscreen or by the adb/fastboot commands, clearing debugging keys, etc... Anybody have any other ideas?
---------- Post added at 07:25 PM ---------- Previous post was at 06:46 PM ----------
Ok, so it appears that the recovery img on 4.4w2 broke adb support or something. There are a few threads that suggest you can root and flash it or just wait for the OTA. We'll see whether I get the OTA before I have time to try this out.
Lollipop OTA Update: Download and How-To (Root Required)
I made a script that roots and updates your watch to 5.0.1 in a click.
[UTILITY][RESTORE][UNLOCK][ROOT] LG G Watch Tool
My way of doing it
osikiri said:
I'm trying to update my G Watch by sideloading a zip file.
I installed the sdk tools and usb driver as usual.
On debugging mode and bootloader, the watch is detected as an ADB device normally. 'adb devices' command works.
But when I reboot and get on recovery mode, the watch disappears on the device manager and never get detected again. So I cannot use 'adb sideload' command.
I've never experienced this kind of issue with smartphones.
Do you have any solutions?
Click to expand...
Click to collapse
I've similar problem, and I've spent almost 3 hours to find the solution. I found that following solution work for me:
http://forum.xda-developers.com/g-watch-r/development/manual-ota-update-root-t2969845
I've changed the step slightly according to the comments inside the thread:
- Enter Bootloader (swipe top left-bottom right as soon as the LG logo pops up on boot)
- Unlock bootloader (fastboot oem unlock) and boot the watch normally once
- Turn off and re-enter bootloader
- Flash 5.0.1 Stock Recovery (fastboot boot recovery.img)
// Do Not Flash 5.0.2 stock recovery
- Enter recovery and ADB sideload the update (tap the android, select install update from ADB and enter adb sideload filename.zip)
//you might have to reinstall the ADB drivers, just follow the simple step to install ADB driver
Done.
fi thought it was finally the solution, but fastboot oem unlock bricked my sony smartwatch3. I see tomorrow if with my windows pc i can fix with sony companion, otherwise i'll have to use the warranty
willisc said:
I've similar problem, and I've spent almost 3 hours to find the solution. I found that following solution work for me:
http://forum.xda-developers.com/g-watch-r/development/manual-ota-update-root-t2969845
I've changed the step slightly according to the comments inside the thread:
- Enter Bootloader (swipe top left-bottom right as soon as the LG logo pops up on boot)
- Unlock bootloader (fastboot oem unlock) and boot the watch normally once
- Turn off and re-enter bootloader
- Flash 5.0.1 Stock Recovery (fastboot boot recovery.img)
// Do Not Flash 5.0.2 stock recovery
- Enter recovery and ADB sideload the update (tap the android, select install update from ADB and enter adb sideload filename.zip)
//you might have to reinstall the ADB drivers, just follow the simple step to install ADB driver
Done.
Click to expand...
Click to collapse
Already posted this 5 times on 3 sites and just not getting a lot of help. If it's bricked, fine, tell me. If it can be fixed, give me ideas.
I can't flash the bootloader or boot in any possible way. not through adb, not through tool kit, not through nexus 7 restore, nothing.
I can access fastboot mode (power+vol down) but nothing else. Standard power on gets stuck on google screen. It is unlocked. I have tried 3 different USB ports and 6 cables with no change.
No BS please, either Yes it's bricked sorry or No, it's not bricked, here are some ideas.
now i see that i'm not alone
same problem here, nobody ? It's a powerfull tablet, maybe now is going to be a powerfull paperweight, big paperweight, so sad.
can you boot into download mode if u can then
1.put your device into download mod 2.download the official firmware for your device on your computer
3.connect yor phone into your computer and flash it
if you can't boot into download mod then sorry I think it's bricked try to bring it to a service center
Sent from my SM-N7505 using XDA Free mobile app
pls answer me so I can help you
I couldn't help myself... I love my Nexus 7.
mrdownboy said:
I couldn't help myself... I love my Nexus 7.
Click to expand...
Click to collapse
LOL
and
zidozido22, i can boot just in fastboot mode
j4k0 said:
LOL
and
zidozido22, i can boot just in fastboot mode
Click to expand...
Click to collapse
Does the PC recognize? If you run the "fastboot devices" does it return a serial number? These things are pretty difficult to hard brick and if you can still get to the bootloader, then chances are it is recoverable. It helps to mention what you did for it to get to this state as well.
es0tericcha0s said:
Does the PC recognize? If you run the "fastboot devices" does it return a serial number? These things are pretty difficult to hard brick and if you can still get to the bootloader, then chances are it is recoverable. It helps to mention what you did for it to get to this state as well.
Click to expand...
Click to collapse
yes, it sends the serial number but when I had tried to flash it then it returns an error.
.***now im trying again with SkipSoft Android Toolkit, but it is stuck waiting for adb mode
before that state, it was charging, just that.
The tablet got Android 5 from OTA, and then android 5.1, i was using it as normal, but one day, while it was charging, it just show the google logo (name) and the lock down.
My 2012 wifi did that exactly. I downloaded wugfresh Nexus Root Toolkit yours can be d/loaded from here http://forum.xda-developers.com/showthread.php?t=2389107
All i did was put my 7 in fastboot mode then ran the tool kit. I then launched the advanced utilities and then fastboot format. Then i flashed stock rom.
Worked a treat. Thought mine was toast as well good luck.
snod33 said:
My 2012 wifi did that exactly. I downloaded wugfresh Nexus Root Toolkit yours can be d/loaded from here http://forum.xda-developers.com/showthread.php?t=2389107
All i did was put my 7 in fastboot mode then ran the tool kit. I then launched the advanced utilities and then fastboot format. Then i flashed stock rom.
Worked a treat. Thought mine was toast as well good luck.
Click to expand...
Click to collapse
I tried once, but i will try it again, thank you
---------- Post added at 12:25 AM ---------- Previous post was at 12:09 AM ----------
doing that you said:
Advanced tools--> fastboot format
now it is stuck in "Fastboot Formating CACHE..."
=(
i think the main problem (one o f them) is that i cannot use adb, when i use the command
Code:
fastboot devices
i get the serial number but when i use
Code:
adb devices
the results is nothing.
j4k0 said:
I tried once, but i will try it again, thank you
---------- Post added at 12:25 AM ---------- Previous post was at 12:09 AM ----------
doing that you said:
Advanced tools--> fastboot format
now it is stuck in "Fastboot Formating CACHE..."
=(
Click to expand...
Click to collapse
I hate to be the bearer of bad news, but that's not a good sign. I haven't found anyone reporting success when it's having that issue. If you have exhausted the external possibilities such as drivers, USB cords, the PC, trying Windows and Linux, etc and still getting the same thing then that means the eMMC is probably messed up. Examples here:
http://forum.xda-developers.com/showthread.php?t=2602638
can you boot into bootloader if you can then navigate by using volume up volume down till you find the recovery and press lock button and factory reset
zidozido22 said:
can you boot into bootloader if you can then navigate by using volume up volume down till you find the recovery and press lock button and factory reset
Click to expand...
Click to collapse
They're way past the point that a factory reset would help or even work as wiping cache is not working and that is part of a factory reset. If it isn't wiping through fastboot commands, it definitely won't work through recovery.
sorry, then you should bring it to a service center
very hard and sad to hear that, thank you anyway guys...
about RMA i saw that will be expensive bcz the warranty time expired
Greetings,
Upon unboxing my OPO X and discovering it's limitations in regard to customization compared to Cyanogen (following this guide :
HTML:
http://oneplus.wonderhowto.com/how-to/install-cyanogen-os-12-your-oneplus-one-0161384/
),
I attempted to flash it using TRWP which I managed to install and start properly.
Either I messed something up with the install process or selected the wrong build for my specific phone (used YNG1TAS0YL-bacon-signed) but I was prompted to reboot my phone upon what I though was completion and ended up with no OS, hard bricked with QHSUSB BULK showing in device manager and totally blanked screen.
I then attempted to fix my own mess by following this guide :
HTML:
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
which suggested I uninstall the faulty driver and replace it with the one suggested.
By doing so, I then ended up with an unknown device and from there my real nightmare started.
I've about tried every single restore guide I could find narrowing my search to my specific model this time figuring it would prevent compatibility issues but still nothing is working.
The sum up what is currently going on with my phone, if I press Power + Volume up, I get "Qualcomm HS-USB QDLoader 9008" listed under the "Ports" section of the device manager. However I now get a result with QCOMDownloadTool (which fail to to anything but is listed in some guides). No access to either fastboot or ADB.
On the other end, Power + Volume down booting will list whatever drivers I've choosen among Google, Samsung, Universal ADB or OnePlus i've tried to install and will list the device as an "Android device". This give me access to fastboot, however ADB never ever detect any devices and attempting to boot the "twrp-2.8.7.0-onyx_f2fs_r5.img" will display "FAILED (remote:dtb not found)".
Also, I noticed that within driver detail under "hardware id's" I get :
USB\VID_18D1&PID_D00D&REV_0100
USB\VID_18D1&PID_D00D
but with the official "OnePlus_android_winusb.inf" it is not replicated for adb value with instead
%SingleBootLoaderInterface% = USB_Install, USB\VID_18D1&PID_D00D ;fastboot
%SingleBootLoaderInterface% = USB_Install, USB\VID_2A70&PID_D00D ;oem fastboot
%SingleAdbInterface% = USB_Install, USB\VID_2A70&PID_4EE7 ;adb
I'm all out of ideas, looking to try and fix it myself (with your help of course) before I go begging OnePlus customer support to save me.
Thanks in advance folks!
Try booting with your stock recovery. Img if you think it boots in fastboot
Sent from my ONE E1003 using Tapatalk
loveboy_lion said:
Try booting with your stock recovery. Img if you think it boots in fastboot
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I think the most basic problem is that no matter what driver I attempted to use so far, end up not showing in ADB.
I don't know the relation between ADB and fastboot, but I probably don't have a fully functional driver.
I made I backup with TWRP before wiping, but I don't think "recovery.emmc.win" & "recovery.emmc.win.md5" will help me a whole lot from fastboot.
Any idea where to get an image file of the stock recovery and the exact commands sequence to be used afterward?
It might sound like I have an idea of what i'm doing because I've been trying to fix this mess for 2 days, but I really don't...
KrapnoV said:
I think the most basic problem is that no matter what driver I attempted to use so far, end up not showing in ADB.
I don't know the relation between ADB and fastboot, but I probably don't have a fully functional driver.
I made I backup with TWRP before wiping, but I don't think "recovery.emmc.win" & "recovery.emmc.win.md5" will help me a whole lot from fastboot.
Any idea where to get an image file of the stock recovery and the exact commands sequence to be used afterward?
It might sound like I have an idea of what i'm doing because I've been trying to fix this mess for 2 days, but I really don't...
Click to expand...
Click to collapse
if i am understanding you correctly then you tried to install oneplus one twrp and rom on oneplus x if you really did so no wonder device is bricked since either you erased all your partitions (which is bad since oneplus did not release files required to debrick hardbrick device) if you only messed up your recovery then you would need stock recovery.img of your e1005 since recovery.img of e1003 most probably wont work you could try though
regarding if you are not sure if your phone is connecting in fastboot or adb try uninstalling all drivers you have installed and install the below drivers and hope your phone is in fastboot mode
https://drive.google.com/open?id=0B48lBYmwzkD5WlFrU2lNb2d5WlE
---------- Post added at 05:40 AM ---------- Previous post was at 05:33 AM ----------
if you have fastboot chances to repair your phone are 99%
your device wont detect under adb
---------- Post added at 06:01 AM ---------- Previous post was at 05:40 AM ----------
you could also check this for help
https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
Well, either I have rebooted before the installation was completed or I had the wrong kernel, but I no longer get any visual response from my phone beside vibrations when I power it on/off.
The drivers currently installed are the ones you provided, still there is nothing in ADB.
I can start a cmd fastboot and get a results from "fastboot devices".
See screen capture blow:
i.imgur(dot)com/KnFmTcf.jpg
i.imgur.(dot)com/4kat7Cv.jpg
I doesn't go any further than that, phone is still dead.
its good news for you
you are in fastboot mode
instead of installing twrp recovery install your stock recovery
it wont flash twrp since its getting dtb error and fastboot wont allow it to load since this version of twrp is for e1003 and yours is e1005
Where can I get an .img of the stock recovery?
I already did overwrite with TWRP so stock recovery is no longer present on the phone right?
I saw this file but I don't think I can use it:
drive.google(dot)com/file/d/0B0pr-ZA5b-1pM1prTmMwQmhOMXM/view?pli=1
you could try it hope it works chances of it working is 50%
fastboot flash recovery recovery.img
fastboot boot recovery.img (if this does not work and manualy try with power+volumedown)
---------- Post added at 06:40 AM ---------- Previous post was at 06:34 AM ----------
you are not alone with same problem
http://forum.xda-developers.com/oneplus-x/help/users-twrp-t3258756/post64071152#post64071152
---------- Post added at 06:49 AM ---------- Previous post was at 06:40 AM ----------
unless someone makes unified build of twrp for e1003 and e1005 you will face same problem if u try to flash twrp again
I do NOT have access to a "recovery.img" file on my phone.
What can I do next? Can these files I made a backup from be of any help currently?
i.imgur(dot)com/uEPBECy.jpg
yes the files are of help but only when u have twrp they cannot be used by fastboot
---------- Post added at 07:08 AM ---------- Previous post was at 07:05 AM ----------
try flashing this twrp recovery
http://ns336247.ip-91-121-110.eu/h2o64/onyx/twrp/
Bacon is for the oneplus one...
KrapnoV said:
Well, either I have rebooted before the installation was completed or I had the wrong kernel, but I no longer get any visual response from my phone beside vibrations when I power it on/off.
The drivers currently installed are the ones you provided, still there is nothing in ADB.
I can start a cmd fastboot and get a results from "fastboot devices".
See screen capture blow:
i.imgur(dot)com/KnFmTcf.jpg
i.imgur.(dot)com/4kat7Cv.jpg
I doesn't go any further than that, phone is still dead.
Click to expand...
Click to collapse
Do you realize you tried to install stuff for an entirely different phone? OnePlus One is not OnePlus X. There was the problem with your installs...
If you get into to fastboot I would try flashing something that is made for OnePlus X and see how it goes.
I would be very happy to flash a compatible rom this time, but while fastboot SEEM to work, i'm not sure it does.
Understand I've never done that before, but all the guide requires to be able to boot recovery to progress, and with that "FAILED remote dtb" error I'm getting I don't know how to go any further. The TWRP version i'm using "twrp-2.8.7.0-onyx_f2fs_r5.img" is supposed the be the right one for my phone.
I would also test stock recovery but I don't have an image file and so far no luck finding one.
KrapnoV said:
I would be very happy to flash a compatible rom this time, but while fastboot SEEM to work, i'm not sure it does.
Understand I've never done that before, but all the guide requires to be able to boot recovery to progress, and with that "FAILED remote dtb" error I'm getting I don't know how to go any further. The TWRP version i'm using "twrp-2.8.7.0-onyx_f2fs_r5.img" is supposed the be the right one for my phone.
I would also test stock recovery but I don't have an image file and so far no luck finding one.
Click to expand...
Click to collapse
Here is stock recovery image for E1005. https://drive.google.com/file/d/0B6zU7r3AtRjFb2tyQU11YTdLVEU/view?usp=sharing
Hi,
My phone OnePlus X E1003 was hard brick after install twrp.. now phone is dead..cannot access recovery and fastboot,screen blank and just vibrate.. when i plug in. it only detect qualcomm HS-USB driver.. but opx still dont have zip to repair the broken partition. anybody have ideal?pls help me.
Same problem here
apekgee said:
Hi,
My phone OnePlus X E1003 was hard brick after install twrp.. now phone is dead..cannot access recovery and fastboot,screen blank and just vibrate.. when i plug in. it only detect qualcomm HS-USB driver.. but opx still dont have zip to repair the broken partition. anybody have ideal?pls help me.
Click to expand...
Click to collapse
Same here, black screen only vibrates on holding power button for 10 seconds :crying:
apekgee said:
Hi,
My phone OnePlus X E1003 was hard brick after install twrp.. now phone is dead..cannot access recovery and fastboot,screen blank and just vibrate.. when i plug in. it only detect qualcomm HS-USB driver.. but opx still dont have zip to repair the broken partition. anybody have ideal?pls help me.
Click to expand...
Click to collapse
What did you do besides trying to install twrp? It would be difficult to brick by just flahshing recovery unless it was the wrong one.
Sent from my ONE E1005 using Tapatalk
If you can get it in bulk mode then you should probably try this http://forum.xda-developers.com/one...stboot-adb-t2835696/post55024864#post55024864
Ok...easy peasy....it happened to me too...Just open a ticket for a remote session with oneplus.....
They do mostly everything in about 45 minutes.
I tried everything too, nothing worked. Don't stress yourself out...They were good about it.
joey24z1 said:
Ok...easy peasy....it happened to me too...Just open a ticket for a remote session with oneplus.....
They do mostly everything in about 45 minutes.
I tried everything too, nothing worked. Don't stress yourself out...They were good about it.
Click to expand...
Click to collapse
pls help me how u manage to contact technical support?
Please! If someone can help me. I did step by step correctly and my le max 2 still with original recovery. All cmd messages are successful, but when I turn on recovery mode, this is the original EUI version. I wanted to use some rom of you but without the TWRP I can not. Some help?
lucasnoman said:
Please! If someone can help me. I did step by step correctly and my le max 2 still with original recovery. All cmd messages are successful, but when I turn on recovery mode, this is the original EUI version. I wanted to use some rom of you but without the TWRP I can not. Some help?
Click to expand...
Click to collapse
If you have your device rooted you can download rashr from the play store and flash the recovery.img from there
moto999999 said:
If you have your device rooted you can download rashr from the play store and flash the recovery.img from there
Click to expand...
Click to collapse
Unfortunately he is not. I solve the problem with unrecognized device, but it always come back. In this post: https://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611
The author says: "OTG is working for some people but not for others also some readers and flash drives are not being seen. Will look into fixing it."
This is kinda my problem. For now i'm using 19s indian stock
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Antisound said:
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Click to expand...
Click to collapse
Yes, I did it. But a blue screen appear fast and my smartphone turns off. It does not go into recovery at all, only after I start the phone normally. Funny that I only get message of success since the release of the bootloader until the installation of twrp.
Have you tried "fastboot boot <recovery.img>"?
sudloa said:
Have you tried "fastboot boot <recovery.img>"?
Click to expand...
Click to collapse
I forget to mention. After the "successful" twrp install, the device is not recognized. What I mean: "List of devices attached" is blank. So I can't use this command.
lucasnoman said:
I forget to mention. After the "successful" twrp install, the device is not recognized. What I mean: "List of devices attached" is blank. So I can't use this command.
Click to expand...
Click to collapse
fastboot could use in fastboot mode (shutdown then vol down + power) only and windows sohuld recognize this.
But I think your adb usb driver got conflict somehow.
You can try "usbdeview" to uninstall all adb usb drivers then use some knid of universal adb usb driver installer.
Antisound said:
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Click to expand...
Click to collapse
This is the key part I have missed as well !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Along with the AT USB unlock code (Dial *#*#76937#*#*) to allow ADB
Thank you :laugh:
---------- Post added at 11:45 PM ---------- Previous post was at 11:40 PM ----------
lucasnoman said:
Unfortunately he is not. I solve the problem with unrecognized device, but it always come back. In this post: https://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611
The author says: "OTG is working for some people but not for others also some readers and flash drives are not being seen. Will look into fixing it."
This is kinda my problem. For now i'm using 19s indian stock
Click to expand...
Click to collapse
Hi, You should TITLE your post Why does TWRP not stay resident ?
paulsnz2 said:
This is the key part I have missed as well !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Along with the AT USB unlock code (Dial *#*#76937#*#*) to allow ADB
Thank you :laugh:
---------- Post added at 11:45 PM ---------- Previous post was at 11:40 PM ----------
Hi, You should TITLE your post Why does TWRP not stay resident ?
Click to expand...
Click to collapse
You're Welcome
Antisound said:
You're Welcome
Click to expand...
Click to collapse
I have the 820. Could NOT get windows to see this phone on stock rom. Don't recall exact steps I took, but I do remember the ADB feature within TWRP saved my day. Windows would see the phone in TWRP recovery adb mode, but could never get windows to adb connect with stock rom.
Hey people, sry I'm coming back now. Lightning struck my street and burned my pc. But I come back with another problem, when I connect my phone to the pc nothing happens. I mean, I can't transfer cause MTP doesn't work. I tried install unninstall and install again adb, and all the drivers but it did not work. So I'll need to fix this to try to install twrp again
Guys! I was being too stupid! I found my mistake... I was using another smartphone twrp... So, for who are having same issue, pay attention to this. But, thanks everybody and sry for this hahaha
Help! Install a custom recovery on my zte z970 that did not work, when I try to enter it puts black screen and red led on. Then I did factory restore inside the operating system and now constantly going to that recovery that does not work. I need to flash a recovery or debrick my zte. Please help! Anything I'm worth, adb commands or any orientation.:crying:
iamjaviag99 said:
Help! Install a custom recovery on my zte z970 that did not work, when I try to enter it puts black screen and red led on. Then I did factory restore inside the operating system and now constantly going to that recovery that does not work. I need to flash a recovery or debrick my zte. Please help! Anything I'm worth, adb commands or any orientation.:crying:
Click to expand...
Click to collapse
If you are able to use Recovery mode , download on your PC one of these stock firmware , and put in your sdcard and update from Recovery.
https://boycracked.com/2016/04/16/official-zte-zmax-z970-t-mobilemetropcs-usa-stock-rom/
Thanks but thats the problem, I install a recovery that dosnt work, dont have recovery right now
Need a rom with xml file to flash my phone with qfil o qpst software but i cant find it
Here you have some ADB commands
https://forum.xda-developers.com/zte-zmax/how-to/zte-zmax-z970-guide-faq-discussion-t3053066/page260
Here you have some recovery for your device
https://androidfilehost.com/?w=files&flid=32972
One of firmware I think
https://androidfilehost.com/?fid=889764386195905580
thaks bro, I will try :good:
If anyone still has a ZTE z970 that's bricked .... I found the fix ... Plug into the PC in bricked state.. hold volume down and power till you hear it connect in ftm mode.. even if it doesn't show up on the phone's screen.. then open cmd in admin.. type this command in.. "adb reboot disemmcwp" and wait for it to boot like normal.
---------- Post added at 06:07 AM ---------- Previous post was at 06:07 AM ----------
My phone was bricked for 6 months
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Also fixed the screen that didn't have touch