so i tried to flash my sprint note 3 today, but i encounter a big problem, i installed rom manager then went into recovery mode and now phone is stuck on ..
recovery booting.......
recovery is not seandroid enforcing
set warranty bit: recovery
i cannot get pass this screen, what can i do?
cesar.. said:
so i tried to flash my sprint note 3 today, but i encounter a big problem, i installed rom manager then went into recovery mode and now phone is stuck on ..
recovery booting.......
recovery is not seandroid enforcing
set warranty bit: recovery
i cannot get pass this screen, what can i do?
Click to expand...
Click to collapse
First, pull the battery. Now what version of KitKat was installed on you device before you tried to flash a rom on your device? Next what rom are you trying to flash on the device ? Did you try and install the recovery that comes with the rom manager ? It is way out of date !!! Here is my thread read through it first http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 now reinstall battery then boot into download mode and odin flash the rom you want. Which should be done after you have made a copy of your stock rooted OS. That way you have a backup in case something goes wrong !!!
i pulled battery out then back in pressed home,power,volume down, its asked volume down to cancel , volume up to install rom. i press volume down but does the same all over again..
i have kit kat, and yes i went into recovery mode with rom manager, did not know it was out of date.
ok ill follow your steps jimz and thank you for getting back to me.
cesar.. said:
i pulled battery out then back in pressed home,power,volume down, its asked volume down to cancel , volume up to install rom. i press volume down but does the same all over again..
i have kit kat, and yes i went into recovery mode with rom manager, did not know it was out of date.
ok ill follow your steps jimz and thank you for getting back to me.
Click to expand...
Click to collapse
OK your almost there, after you reinstall the battery. Press the power button, volume down, and menu button at the same time. A new screen will come up then press the volume up button only, now you are in download mode. ( some people call it odin mode it's the place where you flash/install roms in the device) Next bring up odin on your PC then then connect your device via the charging cable. Now click on PDA then open the OS you want flash. Then don't touch anything else and click start.
That was fast and dirty just go back to the thread for more info. Enjoy !!!
jims thanks for helping me trying to get my phone back up and running, can i ask you a question. i want to flash CyanogenMod 12 for my sprint note 3 . can you send me a link of the right C.M. version , im afraid of downloading the wrong version and damaging the phone again.. there are so many links out there it gets confusing. thank you
cesar.. said:
jims thanks for helping me trying to get my phone back up and running, can i ask you a question. i want to flash CyanogenMod 12 for my sprint note 3 . can you send me a link of the right C.M. version , im afraid of downloading the wrong version and damaging the phone again.. there are so many links out there it gets confusing. thank you
Click to expand...
Click to collapse
Here is the link for CM12 that is not a nightly build http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 and here is the link to the zip file for your device https://s.basketbuild.com/devs/temasek/Samsung Galaxy Note 3 - HLTESPR/CM12 just click download place the zip on your sd card, wipe system, wipe cache and delvik cache and flash through your recovery. ( make sure you have a backup of your stock rooted rom first ) Remember it is CM 12 some features may not work. But if your a CM fan this is the best one out there.
Here is the link to add in the Google apps http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900 I would go with the MINI MODULAR PACKAGE just click on Basketbuild then click on download for the zip file. Place on sd card wipe cache and delvik cache then install the zip file this will give you the basic Google apps. But you can always go with the full Google package that gives you a lot of junk you won't use, which kinda defeats the purpose . Enjoy !!!
im trying to flash with odin but my laptop says it has a trojan virus most sites i get odin from says this... ??
cesar.. said:
im trying to flash with odin but my laptop says it has a trojan virus most sites i get odin from says this... ??
Click to expand...
Click to collapse
Ya, it does that sometimes. You can do a quick scan with your anti virus program. But most of the time that's normal, because your PC does not recognize the program as something you normally use. I use odin v 1.85 it is a little older but very stable here is a link https://mega.co.nz/#!oA5xzTAL!LXoVWB...ZlOMSWdRGVX6Uo this is my mega site no virus there.
Related
I'm willing to DONATE and PAY for your time - to anyone that can put together a comprehensive set of information to assist me.
I have An At&t Galaxy Note with the 4.03 I717 UCLD3 version loaded on it. I have been toying around with rooting it, and trying to load custom roms, my head is spinning with all the posts.
I'm new, and like many people I have issues when I read the posts on this forum as there is no complete guide to load a new Root, find, and load a new ROM.
When the latest ICS was released a few weeks ago, I went to upgrade and my note will not upgrade with Kies since the counter has been tripped and it has the UCLD3 version on it.
Does anyone have the best ROM to load on the note, or can you explain in clear instructions how to get it back to 100% Stock so I can upgrade with At&t ( I'd rather not this approach, I'd love to get the junky At&t stuff off )
What I'm looking for:
1. A complete guide to root, and load a ROM that has everything the stock phone has, without the At&t bloatware ( IE: 4G, Spen support, compatible with samsung apps, keyboard etc.. )
2. A guide to bring the phone and counter back to 100% stock, so that it can be upgraded by Kies if no one can provide #1 above.
Thanks - I appreciate the help.
1. Get cwm HERE the Odin version.
2.once downloaded right click Odin and run as administrator, then click on the PDA slot and load the .tar you just got
(I'm sorry i don't have s link for Odin, shouldn't be too hard to find)
3 put phone in download mode by powering off, then holding volume down and power, then when prompted volume up.
4.connect to usb that's on a usb port in the back of the pc, no front ports or hubs.
5.when you get a yellow box with a :com: number in Odin hit start.
6a.(optional).no need to root first the Rom is rooted, only reason to root first is if you want to use titanium backup to save your apps and their settings.
For root, you'll need to find the su zip that's floating around and flash that in recovery first.
6b.(also optional)boot into recovery by holding all three buttons, both volume and power, then when you feel a vibrant let go of just the power button, go to backup and restore, abs make a nandroid backup of you're current set up.
7.go here for flappjaxxx latest stock based build.
Put that on your phone someplace you can get to without a bunch of navigating. Internal or external doesn't matter.
8.boot into recovery, go to wipe data/factory reset, then wipe cache.
9.go to install zip for sdcard, now if you put the Rom on external the top option "from sdcard" is what you want. If internal the one on bottom that says "from internal sdcard" navigate to where you saved it, then confirm the flash.
Once done, boot into your new Rom and enjoy,
Not completely complete, but your welcome.
No donation needed, but i won't refund it if you were to feel the need lol
Agreed. I switched to twrp but cwm recovery is more user friendly/common
Pm me if you have any?s
ok 1st u will need to download this Root/CWM/ODIN
you will 1st need to put your phone into downlaod mode: power off phone - HOLD VOL DOWN + POWER, once you get the screen that shows Press VOL UP to get to download Mode, (make sure you have the Samsung USB Drivers installed) plug in USB, you will see the COM port in yellow (it does not matter which port number) then click on PDA and navigate to the cwm-touch-i717-120409.tar.md5 and click on start, you will reboot and you have CWM installed that is used to install roms and other stuff (to get in to CWM when device is powered off HOLD VOL UP + DOWN and press the POWER until u feel the 1st vibrate, once you see the 1st Samsung logo, u can let go), then flash Flash Counter Reset through CWM (this will reset your count in ODIN so it will not void warranty. I then use TWRP Recovery Instead of CWM i like the GUI better, just flash with CWM.
ROMS: no as for roms i love Hybrid roms, which makes it a tablet and Phone, i love Paranoid Android you can download here in either ICS or JB, these are already rooted so no need to do all then.
Instructions on Installing ROMS:
1. once you download the roms, move to External SD
2. make a back up with CWM or TWRP, just click on back up and u r done. on TWRP make sure to click on all boxes.
3. Once backed up u will want to do a factory reset, wipe dalvic Cache (in cwm it is under advanced) and wipe cache partition. (some roms will have different instructions but mainly the same)
4. once you r done flashing the rom. reboot and u r done
To Go back to stock you will go here: STOCK ROMS for i717 just download the one u want and you just flash it through ODIN, but if you have CWM or TWRP there is really no need for #2.
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Young Cardiac said:
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Click to expand...
Click to collapse
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/showthread.php?t=1775263
edit: Forgot to say you should really have searched or started a new thread then to hijack a thread that has nothing to do with your issue.
Agoattamer said:
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/sho...se might face the same issue along the way...
Click to expand...
Click to collapse
I followed this video to install Cyanogenmod. https://www.youtube.com/watch?v=AQdSOTdV06Q
during the install I got a red error stating there was some problem with the gapps zip. Now my phone gives a quick samsung flash and nothing else happens. If I hold power,home and volume up I can still get into the cyanogenmod screen with the option to install.
I downloaded the files again and tried installing. It got as far as flashing file 1 of 2 and the working bar keeps spinning and doesn't make anymore progress. The screen eventually went black and now I cant even get into the recovery screen. The screen flashed the samsung logo with small blue writing in the top left and then goes black again.
Please help...
Update - If I hold power, volume down and home I am able to get into the downloading screen.
Try to reflash cyanogen mod again but before that format you device completely by going to recovery mod!
Or try to download the cyanogen mod and gapps from xda thread or from somewhere else!
Before flashing any ROM, it is strongly recommended to completely format your device!
Hope it will help you
skiiermike said:
I followed this video to install Cyanogenmod. https://www.youtube.com/watch?v=AQdSOTdV06Q
during the install I got a red error stating there was some problem with the gapps zip. Now my phone gives a quick samsung flash and nothing else happens. If I hold power,home and volume up I can still get into the cyanogenmod screen with the option to install.
I downloaded the files again and tried installing. It got as far as flashing file 1 of 2 and the working bar keeps spinning and doesn't make anymore progress. The screen eventually went black and now I cant even get into the recovery screen. The screen flashed the samsung logo with small blue writing in the top left and then goes black again.
Please help...
Update - If I hold power, volume down and home I am able to get into the downloading screen.
Click to expand...
Click to collapse
Since you can get into download mode and not into the recovery I would try to flash back to stock following the info in the sticky.
Thanks to the both of you for the help.
FireBlazeGT said:
Try to reflash cyanogen mod again but before that format you device completely by going to recovery mod!
Or try to download the cyanogen mod and gapps from xda thread or from somewhere else!
Before flashing any ROM, it is strongly recommended to completely format your device!
Hope it will help you
Click to expand...
Click to collapse
Thanks but I can't get into the recovery screen, only the download screen.
Darke5tShad0w said:
Since you can get into download mode and not into the recovery I would try to flash back to stock following the info in the sticky.
Click to expand...
Click to collapse
I found this but it is very vague
IF YOUR PHONE MATCHES OPTION 1 LOOK HERE!!
A soft brick is easily fixed in most cases, here is what you can do to fix your phone!
-Boot into Recovery (Vol Up + Home Button + Power Button) and wipe your data/cache/delvik cache and factory reset and start all over.
-If Recovery fails, try booting into Download Mode (Vol Down + Home Button + Power Button) and use Odin to get into stock firmware and start again.
(if youre using a Mac, Linux or Ubuntu Heimdall can be used to flash stock firmware)
-Also make sure the downloaded ROM/GApps are not corrupt when youre flashing. You can do this by checking the MD5.
-If youre getting a "STATUS 7" error, please update your recovery, or update your bootloader.
I also found this one that I will try an follow.
http://forum.xda-developers.com/showthread.php?t=2549068
To confuse things a little, this phone is a telus phone that I had unlocked to use on Bell. I assume I reflash the telus firmware, am I correct?
Bro just download your phone's custum recovery .
Now go to Odin mod in your phone volume down,home,power.then select volume up.now connect your phone in to PC.
Now open Odin select PDA then browse custum recovery. And start button click.
I was able to get my original firmware back with odin.
Can someone link me to the current files for my phone so I don't screw this up again? Its a Telus i747m, which I believe falls under AT&T.
Thanks
skiiermike said:
I was able to get my original firmware back with odin.
Can someone link me to the current files for my phone so I don't screw this up again? Its a Telus i747m, which I believe falls under AT&T.
Thanks
Click to expand...
Click to collapse
Bro go to this site:http://www.sammobile.com/firmwares/
Then create free account select your phone model and download latest firmware.
Then flash via Odin.
Best of luck.
I want to say thanks for all the replies.
I was able to sort out my problem and here is the solution.
I was trying to install the zip files from the micro sd and it was failing every time. I then tried the same sd card in a usb-otg cable and it worked perfectly.
It must have something to do with the built in sd reader.
So I made a small mistake.......
So I was running twrp to install a fresh copy of sickness V7. I ran a back up then instead of running the install i clicked wipe and before I realized it, I was erasing everything. I pulled the battery to try and save it, but no luck. She wont boot to twrp, she just stays at the pop up screen. Please help! I know this might be the best place to ask, but I love this rom and would like to side load it if possible.
Can you still get into download mode? If so you should be able to use Odin, or kies to do a fresh install, and then start over
chstewart said:
Can you still get into download mode? If so you should be able to use Odin, or kies to do a fresh install, and then start over
Click to expand...
Click to collapse
I have tried but with no luck I get the splash screen and at the top is says
Kernel is not seadroid enforcing
Set Warranty Bit: kernel
I cant get into recovery and odin can see the device but i I dont know what to load to it to fix the recovery or how to load a new rom
That sounds like recovery mode, not download mode. Volume down, home button, and power button all together. Google restoring your phone using kies. If you have further issues let me know and I can write you up some instructions....
chstewart said:
That sounds like recovery mode, not download mode. Volume down, home button, and power button all together. Google restoring your phone using kies. If you have further issues let me know and I can write you up some instructions....
Click to expand...
Click to collapse
I was able to run odin and load trwp and it was sucessful. HOw do I get into it? And how do I load a .zip rom into the phone
Thanks for the help
Alex8404 said:
I was able to run odin and load trwp and it was sucessful. HOw do I get into it? And how do I load a .zip rom into the phone
Thanks for the help
Click to expand...
Click to collapse
Ok if you managed to install trwp then with luck you can get into recovery now. Hold volume up button and home at the same time when you power on the phone. If trwp is correctly installed it should load. If it does not load then go here http://www.sammobile.com/firmwares/download/43332/G900TUVU1DOB1_G900TTMB1DOB1_TMB/ and download that file. You'll have to register I believe. Others have posted this but at the moment I don't know which ones. Download that and then use the same way you installed trwp to install this. This will completely restore your phone to stock. you will need to install trwp again. From here I believe you should just be able to then install Twi5ted Lollipop.
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
wlada96 said:
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
Click to expand...
Click to collapse
http://d-h.st/hcA
http://forum.xda-developers.com/showthread.php?t=2494471
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Flash CWM again
wlada96 said:
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Click to expand...
Click to collapse
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
mysteryno46 said:
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
Click to expand...
Click to collapse
I did all what you maintioned with flashing cwm and using odin. Also battery was out of phone for about 2 minutes (for any case).
So can you provide me a link for that "dirty stock rom" and give me intructions how to install it?
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Similar Case like yours ! ! !
wlada96 said:
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Click to expand...
Click to collapse
Sometime back there was this guy who had almost same device as you are mentioning. You can contact and talk to him. Bcoz as per my knowledge Quattro has 5.1 User available space and Duos is written on Upper right.
http://forum.xda-developers.com/showthread.php?t=2536774
By dirty flash I mean, flashing the stock rom over the current stock rom without formatting data and all. That is called dirty flash. Clean flash means wiping all data and then flash the Rom.
Take the backup of all the data and try to do a clean flash if dirty flash doesn't work.
Flashing Stock and repeating the cwm flashing process should work if every step is done as advised.
Try your luck again. :good:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
If you flash the stock Rom properly, it should boot.
wlada96 said:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
Click to expand...
Click to collapse
If you know how to use odin and flash the clean stock rom, it has to boot. There is no way it won't until unless you make some mistake and the flashing fails in between. After flashing the stock rom, initial boot will take long time, you need to keep patience.
Go ahead and flash the stock rom via odin.
Hello, I am new here and also new to using an android device. I followed instructions to root my phone and now I can access the command "su" in a local terminal. But when I go to download SuperUser it says my device is not rooted. Did I miss something? And if I did mess up and didn't install the right kernel, autoroot or whatever, how do I check my android's model number?
thakyZ said:
Hello, I am new here and also new to using an android device. I followed instructions to root my phone and now I can access the command "su" in a local terminal. But when I go to download SuperUser it says my device is not rooted. Did I miss something? And if I did mess up and didn't install the right kernel, autoroot or whatever, how do I check my android's model number?
Click to expand...
Click to collapse
On the back either on the better cover when you peel it off or under the battery it should say something like G900T or G900V depending on your carrier and type of phone I'll help if I can just need to know which model you are actually you might be able to skip my instructions below and just go to install super su and that night work but if not just follow those instructions and you'll be golden if you got any questions pm me or just click the reply button and ask and I'll do my best to answer it
Download the rom you want and kernels that go with it depending on your phones settings such as oj4 OL1 it'll say under settings and about device those versions are the last 3 characters in the field (that confused me at first just a heads up) etc etc make sure theyre all the same also don't forget to download supersu (I can't remember where to find it just go on my topic and someone posted the link there
Put them onto your SD card
Download TWRP 2.8.whatever the newest one is on your computer
Download Odin and on the AP slot or PDA click it then find the TWRP file and click that then go under options on Odin and uncheck autoreboot
Turn your phone off and put it into download mode (press the volume down button and home button and power button at the same time) then the volume up button once the confirmation screen comes on
Then flash the TWRP and once it's done it'll Stat on that screen so you have to remove the battery then put it back in and boot into recovery mode (volume up home button and power button at same time)
Now go into the install button and navigate to your SD card and find the super su and click the install or flash button I can't remember which it is and slide the slider thing and hit reboot phone
When it asks to install super su before you reboot don't click install just reboot it since you've already installed it it'll work
Then go in and you'll have supersu and be rooted
Now boot back into recovery and install/flash the rom and kernel and ignore the supersu install thing again and you'll be good to go I also highly advise making a backup if you have the space for it
Ok I have done that, but now my phone is stuck on the T-Mobile logo...
thakyZ said:
Ok I have done that, but now my phone is stuck on the T-Mobile logo...
Click to expand...
Click to collapse
hmmm did you do the whole process or just the supersu or what part did it get stuck on?
Veid71 said:
hmmm did you do the whole process or just the supersu or what part did it get stuck on?
Click to expand...
Click to collapse
It was after I chose to reboot my device so superSU could build the cache manifest with twrp
thakyZ said:
It was after I chose to reboot my device so superSU could build the cache manifest with twrp
Click to expand...
Click to collapse
okay after you slid the slider bar and click the reboot button when it asked to install supersu did you click install? or did you just click reboot and ignore it? and did you install this super su?https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip id say just redownload it and make sure it wasnt a messed up download and boot back into recovery mdoe and try it again
Veid71 said:
okay after you slid the slider bar and click the reboot button when it asked to install supersu did you click install? or did you just click reboot and ignore it? and did you install this super su?https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip id say just redownload it and make sure it wasnt a messed up download and boot back into recovery mdoe and try it again
Click to expand...
Click to collapse
Well I couldn't find that link but thanks for giving me it. I downloaded SuperSU from google play instead. But I started SuperSU and it wanted to rebuild the cache or something and it gave me the options to do it normally or with twrp so I chose twrp. It rebooted started twrp and started building it, then it started back up and was stuck on the T-Mobile screen. But I downloaded a new rom from sammobile.com and I couldn't get it to work then I renembered something about you have to use a secific Odin version, so I went from 3.10.7 to 3.09 and nothing changed, so then I cleared cache and nothing. So, I went to Odin3 3.07 and nothing so I went back up to 3.09 and it started to stop being soft bricked. And I just have to set everything back up, which will not take long, about 2 hours. So, I will download the SuperSU from that site and I will see if it works again.
Note to self: keep the stock rom, damn it's a huge file.
thakyZ said:
Well I couldn't find that link but thanks for giving me it. I downloaded SuperSU from google play instead. But I started SuperSU and it wanted to rebuild the cache or something and it gave me the options to do it normally or with twrp so I chose twrp. It rebooted started twrp and started building it, then it started back up and was stuck on the T-Mobile screen. But I downloaded a new rom from sammobile.com and I couldn't get it to work then I renembered something about you have to use a secific Odin version, so I went from 3.10.7 to 3.09 and nothing changed, so then I cleared cache and nothing. So, I went to Odin3 3.07 and nothing so I went back up to 3.09 and it started to stop being soft bricked. And I just have to set everything back up, which will not take long, about 2 hours. So, I will download the SuperSU from that site and I will see if it works again.
Note to self: keep the stock rom, damn it's a huge file.
Click to expand...
Click to collapse
No problem I figured that's what had happened and I used Odin 3.10.6 I think it was and yeah if you do it with the TWRP one it ducks it up for some reason I think it's an old supersu version or some thing and it's not compatible but I'll also post a link to download the stock rooted rom for you to flash
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
Veid71 said:
No problem I figured that's what had happened and I used Odin 3.10.6 I think it was and yeah if you do it with the TWRP one it ducks it up for some reason I think it's an old supersu version or some thing and it's not compatible but I'll also post a link to download the stock rooted rom for you to flash
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
Click to expand...
Click to collapse
Which one do I want to download?
thakyZ said:
Which one do I want to download?
Click to expand...
Click to collapse
Either or it really doesn't matter me personally I like deodex just because there's more customizability with it but both do the job also if you do the deodex one it'll take about 10-15minutes to come on after you flash/install it in twrp where as regular should just come on like a normal boot maybe 5 minutes
After about a month of making sure it works I have successfully rooted my phone! Thank you very much!