Gentleman, Cross carrier HD Voice / VOLTE appears to finally be a real thing.
A few minutes ago I had my first HD VOLTE call with my mother. I'm Verizon/N6p, She's ATT/Iphone6. We're both in Brevard County Florida
A quick googlin' shows they are rolling this out in select markets.
Anyone else seeing this with other carriers or other areas?
NickOlsen8390 said:
Gentleman, Cross carrier HD Voice / VOLTE appears to finally be a real thing.
A few minutes ago I had my first HD VOLTE call with my mother. I'm Verizon/N6p, She's ATT/Iphone6. We're both in Brevard County Florida
A quick googlin' shows they are rolling this out in sele woct markets.
Anyone else seeing this with other carriers or other areas?
Click to expand...
Click to collapse
I didn't know this was a real thing. I'm in orange country FL. I'll def pay attention to this. It would explain why I lost VOLTE for a couple of days if towers were being upgraded
Would this apply to those on Project Fi?
Sent from my Nexus 6P using XDA-Developers mobile app
tekno4ever said:
Would this apply to those on Project Fi?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
Only if Sprint, T-Mobile and US Cellular are on the list for the roll-out.
Then again, does Project Fi even support VoLTE already? T-Mobile does and we are using T-Mobile's technology after all.
Being that Project FI is technically just SIP over data, they COULD support an HD wideband codec. But to my knowledge they do not support any type of Wide band codec. And by default technical Voice over LTE is impossible as all Project Fi voice is technically Voice over IP.
Also. I have verified with multiple VZW and ATT customers. Calls from ATT > VZW turn up in HD. Calls VZW > ATT do NOT turn up in HD. I called VZW to question them. And the teir 2 support person I got was clueless and I didn't have time to argue the matter with her. I'll follow up with them later tonight and see if true two way HD call setup is on the road map or just currently broken. Assuming I can fight my way to someone competent.
NickOlsen8390 said:
Also. I have verified with multiple VZW and ATT customers. Calls from ATT > VZW turn up in HD. Calls VZW > ATT do NOT turn up in HD. I called VZW to question them. And the teir 2 support person I got was clueless and I didn't have time to argue the matter with her. I'll follow up with them later tonight and see if true two way HD call setup is on the road map or just currently broken. Assuming I can fight my way to someone competent.
Click to expand...
Click to collapse
Knowing Verizon they probably turned that function off in all of their handsets and want customers to pay a premium
Update: I spoke to VZW support regarding it not working when calling ATT customers, But it working when ATT customers call us. They insisted HD calling doesn't work to ATT users. I explained the info they have in their script is out dated. And insisted they open an NRB ticket for me. Ticket Number #8466364 if anyone wants to open a ticket as well and reference mine.
Currently I have a Nexus 6p I use on AT&T. Last I checked ATT does not support HD voice / Volte for phones that are not branded by att or iphones. Anyone know if the news posted by @NickOlsen8390 will enable HD calling for those of using unlocked phones on att?
I'm going to guess it will not @jimmiekain
ATT still only supports HD voice on their small subset of handsets. One of the reasons I switched from ATT to Verizon when I got my N6P. When I switched at that time (They let me out of contact for it), They said they had no plans to support HD Voice/VOLTE on "BYOD" (Bring your own device)
NickOlsen8390 said:
I'm going to guess it will not @jimmiekain
ATT still only supports HD voice on their small subset of handsets. One of the reasons I switched from ATT to Verizon when I got my N6P. When I switched at that time (They let me out of contact for it), They said they had no plans to support HD Voice/VOLTE on "BYOD" (Bring your own device)
Click to expand...
Click to collapse
thanks. :crying:
Finally got an Update to my Verizon NRB ticket. They basically said they don't support call setup to any other carrier with the AMR-WB codec at this time, However they will accept it from any carrier that wants to send it. I suspect in the coming months this will chance as HD Voice begins to roll out between more and more carriers. Guess We'll just have to wait and see.
Interesting. Does I am not sure about cross network HD calls but I leave my Verizon Nexus 6P's enhanced calling feature off because I drop calls every time I switch from 4g to 3g or anything else. It's brutal while driving. Verizon has so much work to do to get that feature working properly.
The unfortunate part is that we can not access data while on a call with enhanced calling turned off. ?
Wifi calling is enabled for Verizon (go to phone settings to enable). I am sure there
are other changes. Update G965U1UEU3ARH7.
fb
Hi, just posted the same update for GS9 Unlocked using AT&T. 495.78 MB.
Thanks for sharing... View attachment 4598513
Sent from my SM-G960U1 using Tapatalk
fbroce said:
Wifi calling is enabled for Verizon (go to phone settings to enable). I am sure there
are other changes. Update G965U1UEU3ARH7.
fb
Click to expand...
Click to collapse
Yes, and Secure Wi-Fi has now been added. I think it previously existed only on the European firmwares. Now we get it, too.
Any way to see if AT&T Wifi Calling will work as I do not see the option in Settings? I have US Unlocked GS9 on AT&T
If I flash this U1 for my ATT phone (running full Tmobile firmware now),
will I have Wifi calling with Tmobile? Or Wifi calling only works with Verizon with U1
sweetboy02125 said:
If I flash this U1 for my ATT phone (running full Tmobile firmware now),
will I have Wifi calling with Tmobile? Or Wifi calling only works with Verizon with U1
Click to expand...
Click to collapse
Despite what the websites like to post, there really isn't a VZW U1 and an ATT U1. There's just XAA U1. You'll get Wi-Fi Calling on every carrier with it now, except for ATT.
maddie01 said:
Any way to see if AT&T Wifi Calling will work as I do not see the option in Settings? I have US Unlocked GS9 on AT&T
Click to expand...
Click to collapse
Reading up on it (short summary) this is because AT&T uses a database of IMEI numbers to provision WiFi calling and VoLTE. Since our IMEI numbers from our phones are not in that database we won't be able to use WiFi calling or VoLTE.
Makes sense but is ridiculous for AT&T to restrict it. Has anyone ever called to ask to have thier Unlocked IMEI added to this "list" so that these features will work? Seems like it is a disadvantage for AT&T if it works for TMo and now Verizon but not AT&T...?
Just curious...
Sent from my SM-G960U1 using Tapatalk
maddie01 said:
Makes sense but is ridiculous for AT&T to restrict it. Has anyone ever called to ask to have thier Unlocked IMEI added to this "list" so that these features will work? Seems like it is a disadvantage for AT&T if it works for TMo and now Verizon but not AT&T...?
Just curious...
Sent from my SM-G960U1 using Tapatalk
Click to expand...
Click to collapse
It's odd for sure. Verizon has always had VoLTE on unlocked too. At least since the S7. Probably before that. ATT has never felt the need to change the policy.
maddie01 said:
Makes sense but is ridiculous for AT&T to restrict it. Has anyone ever called to ask to have thier Unlocked IMEI added to this "list" so that these features will work? Seems like it is a disadvantage for AT&T if it works for TMo and now Verizon but not AT&T...?
Just curious...
Sent from my SM-G960U1 using Tapatalk
Click to expand...
Click to collapse
Who can say if it's disadvantageous or not, for all we know it might be the technology differences between the networks. Also it does make sense... having specific IMEI numbers known to connect to carrier specific services like wifi calling and VoLTE ensures that everything works. It doesn't make it convenient for us and I will admit it would be nice to have the features.. but for calling via wifi there are options.
Personally I use pbx in a flash and bria softphone. With the right VoIP provider it's a good setup and doesn't break the bank at all. I haven't even spent more then 5 bucks maybe in a month. For me this is better then wifi calling and I don't have any problems.
As for adding our IMEI to that database I tried inquiring about it, but I do recall reading where some people may have had luck in doing this. I suspect it may require a bit of luck and/or perserveriance after my last discussion with AT&T customer service.
I explained the situation and what needed to be done while being placed on hold a few times. As the call continued I tried to be patient with the person I spoke too, but I admit it is not easy when he is saying that just because I see H data speed that it's actually VoLTE. When I mentioned the speed test and how it was H data speed (and that H data speeds are not VoLTE) he was saying that H data speeds were like blazing fast compared to LTE..
I had to politely finish the call before I either started to laugh or feel sorry for that rep.
scottusa2008 said:
I tried inquiring about it, but I do recall reading where some people may have had luck in doing this. I suspect it may require a bit of luck and/or perserveriance.
In my case I tried to be patient with the person I spoke too. After waiting on hold a few times the representative tried to say everything was normal.. and then proceeded but to say that just because I see H+ speed that it's actually VoLTE. When I mentioned the speed test and how it was H data speed (and that H data speeds are not VoLTE) he was saying that H data speeds were like blazing fast compared to LTE..
I had to politely finish the call before I either started to laugh or feel sorry for that rep.
Click to expand...
Click to collapse
Hahaa, i have had a similar situations in the store where i had to correct a worker that was completely explaining 3G/HSPA wrong. Incredible how incompetent they are unless you just want an iPhone...thanks
Sent from my iPad using Tapatalk
maddie01 said:
Makes sense but is ridiculous for AT&T to restrict it. Has anyone ever called to ask to have thier Unlocked IMEI added to this "list" so that these features will work? Seems like it is a disadvantage for AT&T if it works for TMo and now Verizon but not AT&T...?
Just curious...
Click to expand...
Click to collapse
The only thing I've seen some people do successfully to get VoLTE working on an unbranded unlocked device is to have AT&T provision a SIM card to an IMEI of a phone that is AT&T branded and capable of VoLTE. Then use that SIM card on the unbranded unlocked device.
guyd said:
The only thing I've seen some people do successfully to get VoLTE working on an unbranded unlocked device is to have AT&T provision a SIM card to an IMEI of a phone that is AT&T branded and capable of VoLTE. Then use that SIM card on the unbranded unlocked device.
Click to expand...
Click to collapse
Do you recall seeing if they said this work for prepaid and/or postpaid?
If it's that simple i'm gonna have to find a phone capable of VoLTE and see if this works
scottusa2008 said:
Do you recall seeing if they said this work for prepaid and/or postpaid?
If it's that simple i'm gonna have to find a phone capable of VoLTE and see if this works
Click to expand...
Click to collapse
Honestly don't recall, or if it was even mentioned.
So this new version includes wifi calling. You find this in the menu system somewhere? Does HD Voice also work and indicated like Verizon SM-G965U?
houston-tx said:
So this new version includes wifi calling. You find this in the menu system somewhere? Does HD Voice also work and indicated like Verizon SM-G965U?
Click to expand...
Click to collapse
Hd voice always worked on unlocked for Verizon. Wifi calling is found in the phone app's settings.
I flashed G965U1UES3ARI1 for XAA to SM-G965U1 and I can't find settings for Wifi calling. Are they visible or just built in and assumed to be there?
houston-tx said:
I flashed G965U1UES3ARI1 for XAA to SM-G965U1 and I can't find settings for Wifi calling. Are they visible or just built in and assumed to be there?
Click to expand...
Click to collapse
What carrier are you on? It's supported for SPR, TMB, and now VZW. Look in the settings of the actual phone app, not the device settings.
Verizon. Found it. Thought it was in Settings. Thank you!
houston-tx said:
Verizon. Found it. Thought it was in Settings. Thank you!
Click to expand...
Click to collapse
No problem. You're not the first person to look for it in the wrong place. U1 builds always place the setting there. So they stayed consistent doing it this way.
My question/problem. What/why do I have a good 4 bars (of 5 bars) of data signal normally, but, when I decide to dial and make a telephone call, the signal strength goes to barely one bar as soon as I hit the dial button on the phone? I have not moved myself or the phone's location. The call may dial, but goes in and out and, more often than not, drops the call. At the same time, if I receive a call from someone, it is normally a much better signal, and does not drop or go in and out.
I am on Verizon phone (vs996) Frankenstein to us998 30b (pie). I have recently tried android 10 roms (Havoc, POSP). I don't know if that has anything to do with it or not? Very frustrating when trying to call someone.
Any thoughts or explanations or, hopefully, fixes?
Thx
gimpy1 said:
My question/problem. What/why do I have a good 4 bars (of 5 bars) of data signal normally, but, when I decide to dial and make a telephone call, the signal strength goes to barely one bar as soon as I hit the dial button on the phone? I have not moved myself or the phone's location. The call may dial, but goes in and out and, more often than not, drops the call. At the same time, if I receive a call from someone, it is normally a much better signal, and does not drop or go in and out.
I am on Verizon phone (vs996) Frankenstein to us998 30b (pie). I have recently tried android 10 roms (Havoc, POSP). I don't know if that has anything to do with it or not? Very frustrating when trying to call someone.
Any thoughts or explanations or, hopefully, fixes?
Thx
Click to expand...
Click to collapse
If you are using Verizon on US998 firmware, then you don't have access to VoLTE (which is phone calls over LTE, Voice over LTE). LTE started out as a data-only service but for actual phone calls, carriers were still using 3G HSPA or CDMA (Verizon, Sprint). When making a phone call, phones temporarily bump down to 3G, and then jump back to LTE after the phone call is over.
With the VoLTE protocol, that finally allowed phone calls with LTE. It added VOICE capability to LTE.
However, different carriers treat VoLTE differently. T-mobile allows VoLTE and Wi-Fi calling for US998 phones, while AT&T and Verizon are more stingy. They reserve VoLTE mostly for their branded phones running their carrier firmware.
I'm an AT&T customer and I've never had VoLTE because I've never used a branded AT&T phone. For me, on AT&T, when I make a phone call I am bumped down temporarily to AT&T HSPA. Then, after the phone call, it jumps back to LTE.
If I were to flash the AT&T TWRP flashable zip, possibly I could enable that. But it's not just firmware, it's also a setting on the carrier side that has to be enabled.
Bottom line, what's happening is you are seeing you STRONG LTE signal. But when you make a phone call, you are being temporarily bumped down to Verizon CDMA. However, Verizon is in the process of dismantling all their CDMA towers. That's why your CDMA signal is so weak. Verizon plans to shutdown CDMA entirely by end of 2020. After that, you will need VoLTE to make phone calls on Verizon.
Since you have an actual VS996, you can flash the VS996 TWRP-flashable zip. Once on that firmware, see if VoLTE is enabled on your account (carrier side setting) and see if when you make phone calls you stay on LTE and are not bumped down to CDMA?
Thx, Chazz. So, it's a Verizon thing? Not necessarily something I caused by going back and forth trying out the different Android 10 roms. Good to know. I will try the 996 rom later today, since I don't need the Hotspot for a couple of days. As always, you've been very helpful, thx. :good:
gimpy1 said:
Thx, Chazz. So, it's a Verizon thing? Not necessarily something I caused by going back and forth trying out the different Android 10 roms. Good to know. I will try the 996 rom later today, since I don't need the Hotspot for a couple of days. As always, you've been very helpful, thx. :good:
Click to expand...
Click to collapse
Yes, especially if you see strong LTE signal before making the phone call. Control freak Verizon (mostly) only allows VoLTE on Verizon firmware with Verizon branded phones. There may be exceptions (maybe Pixel phones?) and I know the ZTE Axon 7 (not a branded Verizon phone) somehow got VoLTE not only on ZTE stock firmware but also on LOS ROM -- but I believe ZTE paid Verizon to allow that. It's the exception that proves the rule.
Here's a a more in depth article about Verizon CDMA being shut down end of this year.
https://grantcountyreview.com/content/verizon-wireless-postpones-its-shutdown-3g-cdma networks
when Verizon closes its 2G and 3G networks at the end of 2020, 3G phones will become obsolete and non-VoLTE LTE phones will not be able to make or receive calls.
Click to expand...
Click to collapse
You DO have a Verizon VoLTE capable phone -- a Verizon VS996 -- but for V30 only on Verizon firmware. If you were using T-mobile with US998 firmware, you would have no problems with VoLTE or Wi-Fi calling. T-mobile is more open than Verizon about such perks.
I don't get VoLTE with AT&T on US998 firmware, but AT&T has no plans to end 3G HSPA anytime soon.
Chazz, I thought I would give a quick update. Late Last night/early this morning, I switched to vs99630c. I have made two phone calls, one to Florida, one to Washington state. Both connected and sounded so much better than when with the us99830b Rom. Even though both dialers had a little HD in the upper left hand corner. This Rom kept the same 3 or 4 bar designation for the signal strength. Much happier with it. Even though I don't have a hotspot (may have to pay the $10(?)or so to set it up, if I decide to stay on here.
Also, I have just seen a 99630c debloated Rom someone has made, that I might try in the next day or so.
I so wanted to try the android 10 Roms, but I just had too many small issues (reboots, no hot spot, system ui crashes, etc.).
Thnx, again for your help and guidance.
gimpy1 said:
Chazz, I thought I would give a quick update. Late Last night/early this morning, I switched to vs99630c. I have made two phone calls, one to Florida, one to Washington state. Both connected and sounded so much better than when with the us99830b Rom. Even though both dialers had a little HD in the upper left hand corner. This Rom kept the same 3 or 4 bar designation for the signal strength.
Much happier with it. Even though I don't have a hotspot (may have to pay the $10(?)or so to set it up, if I decide to stay on here.
Also, I have just seen a 99630c debloated Rom someone has made, that I might try in the next day or so.
I so wanted to try the android 10 Roms, but I just had too many small issues (reboots, no hot spot, system ui crashes, etc.).
Thnx, again for your help and guidance.
Click to expand...
Click to collapse
Then you are now probably using Verizon VoLTE, which is using LTE signal -- not the increasingly degraded CDMA signal Verizon will completely shut off December 31, 2020.
Verizon is probably already deprecating those towers -- leaving just enough, like when you're on the highways.
ChazzMatt said:
Then you are now probably using Verizon VoLTE, which is using LTE signal not the increasingly degraded CDMA signal Verizon will completely shut off December 31, 2020.
Verizon is probably already deprecating those towers -- leaving just enough, like when you're on the highways.
Click to expand...
Click to collapse
I really want volte and vowifi for my unlocked us998. The only way to have that is to flash the vs rom, which is 30c? I'm on US99820h, what do I lose by going to the vs rom? Is there a vs 20h variant?
ldeveraux said:
I really want volte and vowifi for my unlocked us998. The only way to have that is to flash the vs rom, which is 30c? I'm on US99820h, what do I lose by going to the vs rom? Is there a vs 20h variant?
Click to expand...
Click to collapse
Yes, we have Oreo VS996 KDZ. It's actually "20k", because it took Verizon two attempts to fully release LG V30 Oreo. And they released a couple extra updates for Verizon related bugs. So, although it's equivalent to US998 20h, it's a higher letter.
https://forum.xda-developers.com/lg-v30/development/vs996-lg-v30-verizon-vs996-t3865398
You need to have VoLTE enabled in your Verizon account, besides flashing this firmware. It helps to have it already enabled from a Verizon branded phone. But sometimes a helpful store rep willing to bend the rules can do it for you.
ChazzMatt said:
Yes, we have Oreo VS996 KDZ. It's actually "20k", because it took Verizon two attempts to fully release LG V30 Oreo. And they released a couple extra updates for Verizon related bugs.
https://forum.xda-developers.com/lg-v30/development/vs996-lg-v30-verizon-vs996-t3865398
You need to have VoLTE enabled in your Verizon account, besides flashing this firmware. It helps to have it already enabled from a Verizon branded phone. But sometimes a helpful store rep willing to bend the rules can do it for you.
Click to expand...
Click to collapse
I thought the Pie variants were not great, lots of broken features? Or was that just the US998 versions? What were the tradeoffs to staying on Oreo?
ldeveraux said:
I thought the Pie variants were not great, lots of broken features? Or was that just the US998 versions? What were the tradeoffs to staying on Oreo?
Click to expand...
Click to collapse
You asked for Verizon Oreo equivalent to US998 20h and that's what I gave you.
I'm not recommending Pie for US998.
Verizon Pie may be a lot better. I don't know. Someone using Verizon Pie will have to answer.
ChazzMatt said:
You asked for Verizon Oreo equivalent to US998 20h and that's what I gave you.
I'm not recommending Pie for US998.
Verizon Pie may be a lot better. I don't know. Someone using Verizon Pie will have to answer.
Click to expand...
Click to collapse
I misread, somehow thought the ROM you linked was Pie. My bad. I know dirty flash is never recommended, but could I get away with it here? What do I lose by going with the VS ROM over the US998? Apparently the only things I have to gain are VOLTE and possibly VVM?
ldeveraux said:
I misread, somehow thought the ROM you linked was Pie. My bad. I know dirty flash is never recommended, but could I get away with it here? What do I lose by going with the VS ROM over the US998? Apparently the only things I have to gain are VOLTE and possibly VVM?
Click to expand...
Click to collapse
Do you have VoLTE already enabled in your Verizon account?
You'll lose the no bloatware experience, but you can fix that with Titanium Backup.
As for dirty flashing, you can try... If it doesn't work, then you have to factory reset and clean install. Don't forget to reflash Magisk.
ChazzMatt said:
Do you have VoLTE already enabled in your Verizon account?
You'll lose the no bloatware experience, but you can fix that with Titanium Backup.
As for dirty flashing, you can try... If it doesn't work, then you have to factory reset and clean install. Don't forget to reflash Magisk.
Click to expand...
Click to collapse
I logged into my VZW account and after 8745 menus, finally found the HD Voice section. It says it's "Active", so I should be good for the VS ROM yes?
ldeveraux said:
I logged into my VZW account and after 8745 menus, finally found the HD Voice section. It says it's "Active", so I should be good for the VS ROM yes?
Click to expand...
Click to collapse
Seems like, yes.
I had to do a few steps to manually activate HD/VOLTE on my VS996 phone when I was on VZ. I documented the steps somewhere here (using ShortcutMasterLite). I know at least one other member here used the same steps on his phone. I'm thinking you'll be fine once you're on VS996.
I have not switched to Pie... still running Oreo. I have heard too many issues with Pie, so I have no desire to bother. I can't imagine VZ's Pie release is any better than Pie US998. VZ is too lazy to do anything else right, so why would they bother fixing what's wrong on US998.
Just want to quickly update this thread. I dirty flashed the VS99620K.zip in TWRP, then immediately flashed the latest Magisk zip. Everything updated perfectly, installed about 10 VZ apps, and I now have VOWIFI (and can send/receive texts!), though haven't been able to check VOLTE as I'm currently in a dead zone.
I'd already had HD calling active on my account, but can't select the option to also enable Video Calling. It says I need to contact support. I chatted multiple times with VZ support who claim it's active, though every time I try to enable it, it gives me the same error. What is this option, and do I need it? I'm pretty sure I was able to use Duo, Skype, Zoom, etc before the ROM update, am I spinning my wheels here?
Also, independent of this upgrade, my motion GIFs in any text app don't move. I thought it might have something to do with the non-VZ specific kernel, but after flashing, still just shows a static picture.
ldeveraux said:
I'd already had HD calling active on my account, but can't select the option to also enable Video Calling. It says I need to contact support. I chatted multiple times with VZ support who claim it's active, though every time I try to enable it, it gives me the same error. What is this option, and do I need it? I'm pretty sure I was able to use Duo, Skype, Zoom, etc before the ROM update, am I spinning my wheels here?
Click to expand...
Click to collapse
Are you the account holder? Some people can't get to it as they are just user.
https://community.verizonwireless.c...video-calling-feature-is-disabled/td-p/853001
I'm not sure what Verizon video calling is. I'm guessing some Verizon-only video chat -- like Apple's FaceTime is only for iOS? If you are already using Duo, Skype, Zoom, it would seem you don't need it. But you do make sure you have voice over LTE (VoLTE, called "HD calling" Verzion) --before end of this year.
ChazzMatt said:
Are you the account holder? Some people can't get to it as they are just user.
https://community.verizonwireless.c...video-calling-feature-is-disabled/td-p/853001
I'm not sure what video calling is. I'm guessing some Verizon-only video chat -- like Apple's FaceTime is only for iOS? If you are already using Duo, Skype, Zoom, you don't need it. But you do need to get voice over LTE.
Click to expand...
Click to collapse
I am the only user on this account, so definitely the account holder. After more wasted chats with VZ, they said that since my phone is not VZ branded, it's not eligible for Video Calling, which apparently is exactly as you described; Facetime for non-iphone Verizon users. I don't need that, as you said all my other platforms work fine.
How do I determine if VOLTE works? Like I said, I'm in a dead zone now, but going out to a good cell region in a few hours and can check then somehow. I did confirm that I can make calls and text over WiFi, so that's half the battle. How to check VOLTE?
ldeveraux said:
How do I determine if VOLTE works? Like I said, I'm in a dead zone now, but going out to a good cell region in a few hours and can check then somehow. I did confirm that I can make calls and text over WiFi, so that's half the battle. How to check VOLTE?
Click to expand...
Click to collapse
I think if you have Vo-WiFi that means your VoLTE is also activated. They seem to be packaged together.
If you make a call in a good signal area, see if the "4GLTE" icon stays on when you make the call. It may even change to VoLTE icon? or HD calling icon? A Verizon user can probably tell you better. But the key is to see if there are any status bar icon changes and what they are. Also see if there is any information in the dialer GUI during the call, where you click on the dialer timer.
Yeah, don't talk to VZ. They're too stupid to help and downright liars. Your phone will work fine on their network even if it's not VZ branded (I've used US998 and H931 phones on VZ without issue).
On my phone, I did have to do some setting changes in SML (ShortcutMasterLite) to get VOLTE working. I don't think most people have to do that, but I did... and I agree, I think that got VOWIFI working as well. I'm guessing you have both, too... just need to try it. If not, you can force-activate it as I documented earlier (via SML).
I have At&t and just got the Oppo Find N, chinese version. When i got to make a phone call, it pauses and sometimes doesnt seem to even connect before the call goes through. Data and texts seem to work fine with no hesitation. Anyone else having this problem or any advice? Thanks!
I had the same thin happen while in the office at home is working well.. not sure will test again tomorrow.. are you still having the issue ?
Sorry lads, i was on the same boat as you just a few days ago. My Find N also stopped making and receiving phone calls. Turns out AT&T shut down its 3G services hence you're unable to make phone calls. You'll need to switch to Tmobile if you want to continue using the phone. Tmobile is retiring 3G in July but I believe it handles phones differently than AT&T so we'll still be able to use it after July.
Not sure if that is the case I am on ATT and my Oppo N is on 4G able to make calls…
and might have spoken to soon.. unable to make calls any more.. The weird part is that SMS and 4G internet works..
carrieta17 said:
Not sure if that is the case I am on ATT and my Oppo N is on 4G able to make calls…
Click to expand...
Click to collapse
It is pretty much the case. If youre able to make phone calls currently, it means ATT hasn't shut down the 3G towers in your area. They have plans to complete shutdown by Feb
carrieta17 said:
and might have spoken to soon.. unable to make calls any more.. The weird part is that SMS and 4G internet works..
Click to expand...
Click to collapse
Right..... You didn't speak too soon. The towers in your area were just shut down. You'll have to switch to Tmobile now.
Since folks here are talking about T-mobile, I have a question.
Does 5G work with it on T-mobile (I'm in the US)?
I saw that it supports n41 which is one of the band supported by T-mobile. But just wanna double-check.
iocat said:
Since folks here are talking about T-mobile, I have a question.
Does 5G work with it on T-mobile (I'm in the US)?
I saw that it supports n41 which is one of the band supported by T-mobile. But just wanna double-check.
Click to expand...
Click to collapse
I'm on T-Mobile, and have not had working 5G.
That doesn't mean it doesn't work somewhere... But not here in LA.
rcs1000 said:
I'm on T-Mobile, and have not had working 5G.
That doesn't mean it doesn't work somewhere... But not here in LA.
Click to expand...
Click to collapse
I guess 4G LTE speed wasn't too bad?
I've been on both and honestly my 5G UC indicator shows up but the speed difference is not perceivable.
Suggest trying to manually change the band preference using a utility such as '5G LTE' by Rudra Green on the play store. This allows lots of different LTE and 5g options to be selected. The only problem is that the setting is lost after the phone is restarted. I have been using this to enable 5g in the UK.