Hello to everyone, I want to ask for your help!
First of all sorry for my bad english! I will try to explain the situation.
Last December (2014) I bought a THL W200s phone, from China. It's impossible for me to find the seller, because my uncle that was living in China for 1 year, ordered the phone via TaoBao but he doesn't remember to what seller.
Well, the phone was ok, till it fell down to the floor and the display broke.
I mean, the "outside" glass was ok, but the display wasn't.
I ordered a new phone screen in Aliexpress (ask for the link, I can't put any link here) and changed the screen.
The new screen works OK, but I've a problem. I can't get the touchscreen working.
I mean, I can see perfectly the main menu, but if I touch the screen, it doesn't "moves" or do anything, the touchscreen part isn't working.
I talked to the seller, and researched, and found out that might be a firmware problem. Something like that the screen was newer than the phone, or vice versa.
I downloaded and flashed almost all the firmwares/ROM's available in the Internet for THL W200s, that can be flashed by SP FlashTools (I can't use another method to flash because the touchscreen doesn't work), but no one worked completely.
I mean, with all the firmwares/ROM's I flash, I get the same result. Display works OK, but no touchscreen.
Except with this one : Needrom- W200S 4.4.2-KK-09/09/2014
With that one, I get the opposite result, I mean, my touchscreen works, but the display doesn't. The Phone turns on, but shows no image, it's all black, but I can feel the vibration when I press the screen and the touchscreen works OK.
I don't have experience flashing that things, or in basic Android, but I wanted to know if you can help me! I'm desperate!
I would have to "combine" the "part" or file that contains the touchscreen of that ROM (W200S 4.4.2-KK-09/09/2014) with another one, So I can finally get my display and touchscreen working.
Any ideas of how to do it? I tried replacing the lk.bin file of the ROM I mention, in some other ROM's that make my display works, but I don't get any good result.
Please, if this topic doesn't go in this forum, or if I've posted some link that can't be posted, I apologize!
Thanks for reading, if you don't understand something please ask!
PD: I've already asked to the seller for the suitable firmware, but the one that he provided, doesn't work.
Any never firmware should work. How you tried to install firmware? By FlashTool? Flash everything but preloader, it should work. To be on the safe side try latest JellyBean (4.2.2) from needrom. This could be some new screen revision but who knows. Please post your results.
miljenko said:
Any never firmware should work. How you tried to install firmware? By FlashTool? Flash everything but preloader, it should work. To be on the safe side try latest JellyBean (4.2.2) from needrom. This could be some new screen revision but who knows. Please post your results.
Click to expand...
Click to collapse
First, thanks for reading!
Yes, I've tried via SP FlashTools v5.1352.01, because I think I can't flash ROM's with CWM or TWRP because I can't get my touchscreen working, so I can't install them on my phone. If I'm not right, please correct me.
As I said, I tried almost every rom that is available in NeedRom for thl w200s that can be flashed using SP FlashTools. But I can't get any good result, touchscreen doesn't work. I'm sure it's only a firmware problem, because flashing the ROM that I describe in the topic, touchscreen works but display doesn't. And flashing any other ROM display works but touchscreen doesn't.
Could you recommend a ROM to try? I don't know what else to do. I'm afraid my phone is lost
What I did to flash all the ROM's I download, using SP Flash Tools, is to select the Android scatter, then in the sliding panel clicked in "Firmware Upgrade", click in Download, connect the phone without the battery, and wait the ROM to be flashed.
I don't know what is wrong !
I had the same problem when I changed my screen.managed to use my back up I made with mtk droid tools.before I changed my screen,I was on the 4.4.2 ROM which I could now no longer use(black screen), but for some reason I could now install the ROMs from need ROM (which I couldn't use before)and the backups on my phone would freeze when I used them.only the stock ROM I had and the ultimate ROM from need ROM would work.but now the mic no longer works(tested with the google apk,phone calls and sound recorder) and the vibrate does not work and the proximity sensor does not work(tested it by using the dialer but the screen stays dark so can't end the call.so I got a dialer apk from play and that works but in the end I used a xposed module to stop the proximity sensor. really had enough of this phone.
Sent from my W100 using XDA Free mobile app
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Today, I had the CM7.2 rom on my SK17, and it worked perfectly, I toke the phone to use it, but the touch screen didn't worked! I saw the things in the screen, but touching it gave me the same result as touching a non tactile screen! Of course, I couldn't unlock and use it.
I tried to enter the CWM mode and flash it. In the CWM the soft keys didn't worked, so I had to wait to flash again the boot.img at home with the computer.
But although I flashed again the boot.img, the touch screen didn't worked. I tried to flash other different boot.img, but it continues without work. I don't know what to do!!
Do you flash the right rom??mango??
Sent from my Xperia Mini Pro using XDA
Seen quite a lot of topics about SK17 touchscreen problems, but no solution yet, neither do we know what causes the bug.
Also, soft keys in CWM not working. I hear that first time.
Get back to fully stock ROM, might help you.
Of course I had flashed the correct rom, for mango, sk17, and I returned to the official rom too, but the problem persists.
I think it's a hardware problem, but I don't know if I should open the phone to see if something is broken...
Ok, I finally decided to take the phone to vodafone and make them solve the problem. It's under warranty yet and I think it's a hardware problem, so I won't have to pay, but I'll have to cope without my xperia during 10 days :S
Thanks for the ideas you suggested
yeah, me too having this problem.... once it worked i restored backup...but after 30minutes stopped working again.... i can change kernels...but not working..so i guess not the lib's fault here. Also softkeys doesnt work, i guess they are part of screen.
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Mine too!!!
Did you use the correct version of CF root??? I accidentally flashed the wrong one because it was right next to the correct one. The exact same thing happened to me!!!!!!!!!!!! I think the touch screen controller is dead. I am going to look at the Log to see what's happening. Does yours also take a while to boot or to load recovery?!!
CryptXus said:
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Click to expand...
Click to collapse
Hi
I am also in the same boat, any solution for this problem ?
Best regards
Sounds like u fried ur LCD touch. Hope u have insurance.
Sent from my SCH-I535 using xda app-developers app
Odp: Touchscreen not Working after rooting
I suppose wrong version used.
Sent from my washing machine...straight from the tumbler...
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My working solution
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Sup
lores79 said:
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Click to expand...
Click to collapse
So u must pay to buy a new touch module?
Dewasatya said:
So u must pay to buy a new touch module?
Click to expand...
Click to collapse
Pay yes unless its under warranty and root voids warranty .
OP self inflicted damage nothing to do but pay and learn .
jje
Root your Device
To Reset binary counter when touch is Dead Click here
Now Flash with a Stock Rom
And CLAIM Your Warranty
I've installed a couple of different roms (custom en stock) and suddenly my touch screen isn't working anymore.
I'm sure it's not a physical problem (didn't drop), is it possible a rom messed up my touch screen drivers or something like that?
Download mode is working fine, installation of any rom without any problem but at the language selection screen my touch screen doesn't respond.
Does anyone got more options I can try before I send it to a Samsung Service Center.
Angelofmusic seems to have a similar problem, but no response yet. http://forum.xda-developers.com/showthread.php?t=1671969&page=119
beka66 said:
I've installed a couple of different roms (custom en stock) and suddenly my touch screen isn't working anymore.
I'm sure it's not a physical problem (didn't drop), is it possible a rom messed up my touch screen drivers or something like that?
Download mode is working fine, installation of any rom without any problem but at the language selection screen my touch screen doesn't respond.
Does anyone got more options I can try before I send it to a Samsung Service Center.
Angelofmusic seems to have a similar problem, but no response yet. http://forum.xda-developers.com/showthread.php?t=1671969&page=119
Click to expand...
Click to collapse
Thread moved to proper forum.
Nobody got any clue how to fix this?
beka66 said:
Nobody got any clue how to fix this?
Click to expand...
Click to collapse
right, to start off remove your sim/sd card (if you have one)
next format the internel sd card, or dlete EVERYTHING on it
wipe the phone in recovery
download the latest Samsung firmware and flash that in odin (instructions on the thread) then after you see the samsung logo pop back up enter stock recovery mode. then wipe everything there. boot up and touch screen SHOULD work. If it doesn't send it into Samsung. Little more i can do.... good luck
I have had the exact same thing happen to me - and have found one other user with the same issue as well - seems like too much of a coincidence that it happened after a rom upgrade for it to be hardware - even more of a coincidence for the same thing to happen to three different people
part of me refuses to accept that its a hardware issue - I am trying all sorts of rom and kernel (stock and modded ) solutions to see if that resolves it
I tried the same things, tried a lot of roms but all the same the touch screen didn't work.
On another forum a guy advised to install the CWM touch and see if that works, but after the install I couldn't got to the recovery mode.
So I couldn't test it.
An other thing Im going to test is attaching a usb OTG cable and attach a mouse. Im curious if the mouse will work and if it's possible to recalibrate the touch screen......
If you have a solution I would be very happy.
thejoose said:
I have had the exact same thing happen to me - and have found one other user with the same issue as well - seems like too much of a coincidence that it happened after a rom upgrade for it to be hardware - even more of a coincidence for the same thing to happen to three different people
part of me refuses to accept that its a hardware issue - I am trying all sorts of rom and kernel (stock and modded ) solutions to see if that resolves it
Click to expand...
Click to collapse
I tried a few roms that use Aroma to install and the touchscreen doesn't work in that either
I have also just noticed that when ever i try to install any CWM touch version - i am unable to boot to recovery - regular cwm recovery and the stock recovery will work
is that linked maybe?
I've attached a mouse with the OTG cable but still wasn't able to reconfigure/calibrate the touch screen.
So installed triangleaway, back to the original rom and to the repair center
How did you install Triangle away without being able to get into a rom?
at the moment my rom count is 27 and i didnt realise i could get triangle away on there without a rom to load it into - is there a .zip update that will do it from the stock recovery?
Friends I need help I bought a Z5 clone but it came with a virus where several advertisements were displayed then I tried to flash the custom room to see if it resolved but the device was bricked then tried several versions of rom they all go perfectly by flash tools but when I turn on the device the flash back lights and does not light anything on the screen but until the windows recognizes the files but the flashlight does not turn off and the screen does not come too help me please I've done everything and I can not if I'm not mistaken that eh the Z5 ORRO removed the glass back and has a TLC sticker I researched and arrived at the Z5 ORRO
Sorry if I posted in the wrong area.
dygow16 said:
Friends I need help I bought a Z5 clone but it came with a virus where several advertisements were displayed then I tried to flash the custom room to see if it resolved but the device was bricked then tried several versions of rom they all go perfectly by flash tools but when I turn on the device the flash back lights and does not light anything on the screen but until the windows recognizes the files but the flashlight does not turn off and the screen does not come too help me please I've done everything and I can not if I'm not mistaken that eh the Z5 ORRO removed the glass back and has a TLC sticker I researched and arrived at the Z5 ORRO
Sorry if I posted in the wrong area.
Click to expand...
Click to collapse
Just download ur official fimware and flash bro
Romeotamizh said:
Just download ur official fimware and flash bro
Click to expand...
Click to collapse
This is the problem, my friend, I've already looked at everything that is a site and already flash a lot of versions of several models and can not get anything, someone can give me some help
I believe that I already installed the official version of this model but even so, it only has a black screen turned off and the flash back on, it tells me where I find the official rom because in nedrom I did not find it