Hi there!
I have a problem with my lenovo P780... i bought it a few days ago and I wanna change my ROM.
I have install by flashtool (firmware uprgade) this one: P780_4.4.2_MultiLang_Gapps_Root_baralajbi_V7_ForFlashtool (2355 dls)
Everything was great, everything install correctly, but... my p780 doesn't work. It didn't start. What can I do to turn on my phone?
For now my p780 is completely dead...
Sorry for my english.
I have warranty for my p780...maybe I should send it to seller?
Killerek23 said:
Hi there!
I have a problem with my lenovo P780... i bought it a few days ago and I wanna change my ROM.
I have install by flashtool (firmware uprgade) this one: P780_4.4.2_MultiLang_Gapps_Root_baralajbi_V7_ForFlashtool (2355 dls)
Everything was great, everything install correctly, but... my p780 doesn't work. It didn't start. What can I do to turn on my phone?
For now my p780 is completely dead...
Sorry for my english.
I have warranty for my p780...maybe I should send it to seller?
Click to expand...
Click to collapse
Because your phone is made after 03.2014 you must change your preloader.
Flash this new preloader from here.
Download the preloader.
Replace your normal preloader who came with your rom with this one on the link.
Reflash your rom again!
Good Luck!
stympy said:
Because your phone is made after 03.2014 you must change your preloader.
Flash this new preloader from here.
Download the preloader.
Replace your normal preloader who came with your rom with this one on the link.
Reflash your rom again!
Good Luck!
Click to expand...
Click to collapse
Thanks for your reply, but i have another problem... when i connect my phone to the computer it shows that i have "undefined device" ... and i can't reflash by flashtool.... :crying:
Killerek23 said:
Thanks for your reply, but i have another problem... when i connect my phone to the computer it shows that i have "undefined device" ... and i can't reflash by flashtool.... :crying:
Click to expand...
Click to collapse
After pressing download open the case of your phone and press the small red button for 20 secconds ! tell me what is going on !
stympy said:
After pressing download open the case of your phone and press the small red button for 20 secconds ! tell me what is going on !
Click to expand...
Click to collapse
Unfortunately, nothing... but I have opened the 'device manager' and its refreshing several times.
Edit: Now when i connect phone, computer recognized him, but not as "mt65xx preloader" just as "alcatel single RNDIS interface" ?? what does it mean??
Killerek23 said:
Unfortunately, nothing... but I have opened the 'device manager' and its refreshing several times.
Click to expand...
Click to collapse
Try to reinstall the drivers ! if you dont manage ill meet you here tomorow ! at 18.00 CET !
stympy said:
Try to reinstall the drivers ! if you dont manage ill meet you here tomorow ! at 18.00 CET !
Click to expand...
Click to collapse
ok, i'll be waiting thanks a lot !
Edit: MAN! Youre a genius of lenovo p780! i follow this steps: http://forum.xda-developers.com/showpost.php?p=55615721&postcount=19 and everything is working great! You're my master
Thank you a lot!!!
Oh, i have a problem with camera and flashlight... i don't have any options to change front camera to the rear camera... i have download some apps but any of them can take the picture by rear camera... front camera is ok.
Killerek23 said:
Unfortunately, nothing... but I have opened the 'device manager' and its refreshing several times.
Edit: Now when i connect phone, computer recognized him, but not as "mt65xx preloader" just as "alcatel single RNDIS interface" ?? what does it mean??
Click to expand...
Click to collapse
You need to replace the preloader file and keep pressing "volume up" while it is flashing.
http://forum.xda-developers.com/showpost.php?p=34914486&postcount=3
I dont remember if you need to install other kind of drivers.
platbr said:
You need to replace the preloader file and keep pressing "volume up" while it is flashing.
http://forum.xda-developers.com/showpost.php?p=34914486&postcount=3
I dont remember if you need to install other kind of drivers.
Click to expand...
Click to collapse
i solve this problem, now i have another problem:
Killerek23 said:
Oh, i have a problem with camera and flashlight... i don't have any options to change front camera to the rear camera... i have download some apps but any of them can take the picture by rear camera... front camera is ok.
Click to expand...
Click to collapse
Related
Hello, I have a big problem with the phone. It's no turning on after trying to flash.
I can see it as MTK USB Port (ComX), but there is no way to flash it again because of "enable dram failed (4032)" in FlashTool.
How to fix it?
pawelb93 said:
Hello, I have a big problem with the phone. It's no turning on after trying to flash.
I can see it as MTK USB Port (ComX), but there is no way to flash it again because of "enable dram failed (4032)" in FlashTool.
How to fix it?
Click to expand...
Click to collapse
Remove the back cover and connect your phone with the pc through data cable and kept pressing the red button for 10 secs which is near the sd card slot and release it. It will vibrate and lit up after 2-3 secs then remove the cable and start it.
Manek88 said:
Remove the back cover and connect your phone with the pc through data cable and kept pressing the red button for 10 secs which is near the sd card slot and release it. It will vibrate and lit up after 2-3 secs then remove the cable and start it.
Click to expand...
Click to collapse
It doesn't work. No vibration at all.
pawelb93 said:
It doesn't work. No vibration at all.
Click to expand...
Click to collapse
Prepare the rom to flash, then press firmware ugrade, plug your usb cable, keep pressed the red button for 20 secconds to reset preloader and tell us what is going on ?
stympy said:
Prepare the rom to flash, then press firmware ugrade, plug your usb cable, keep pressed the red button for 20 secconds to reset preloader and tell us what is going on ?
Click to expand...
Click to collapse
Now, I am also having the same problem. I followed your instruction but persist the same error DRAM FAILED 4032 and also I dont have any nandroid backup. Whether it will be related to preloader issue ?
Hi pawelb93 and Manek88,
+1
I'm having the same problem as well. I was using this tuto and all went fine because I got the big green circle of success from Flash tool. Then I unplugged my phone and it hasn't booted since. It was :crying: a 4GB international version with Jelly Bean 4.2.
d8v8n8 said:
Hi pawelb93 and Manek88,
+1
I'm having the same problem as well. I was using this tuto and all went fine because I got the big green circle of success from Flash tool. Then I unplugged my phone and it hasn't booted since. It was :crying: a 4GB international version with Jelly Bean 4.2.
Click to expand...
Click to collapse
My problem has been solved.
Hii d8v8n8 have you tried pressing the red button by plugging to pc ??
If you have a 4032 dram problem you need to format whole drive using sp flash tool and install a fresh stock rom.
Manek88 said:
My problem has been solved.
Hii d8v8n8 have you tried pressing the red button by plugging to pc ??
If you have a 4032 dram problem you need to format whole drive using sp flash tool and install a fresh stock rom.
Click to expand...
Click to collapse
Hi Manek88,
Yup, I pressed and pressed the red button, once even for a full minute without a break but to no avail.
However and fortunately from another poster, stympy, I got the suggestion that it might be a driver problem. For the unfortunate user, please click on the embedded links for the steps it took me to get things sorted out.
I wish sincerely for the wary who landed here to be able to solve his or her issue with our trials and errors posted here. Thank you all.
Club of anonymous brickers
Hi, I just wanted to leave a comment about how I unbricked my Chineese p780 4Gb. Maybe useful to somebody.
Flashed the wrong ROM, got the brick, the only sign of life was a red LED when connecting to USB. After the second flashing got the same DRAM_FAIL (4032) error. Finally, after finding the right ROM I got phone's screen blinking for a second, but still not loading and not functioning.
So, after some experiments I found out that fresh driver/tools versions do matter a lot and I managed to flash the same needed ROM with fresher tools.
Setup (can't post links, I downloaded these from lenovo-forums dot ru):
- driver SP_Flash_Tool_Driver_Auto_Installer_v1.1236.00
- SP_Flash_TOOLS v5.1352.01
- very nice light and functional ROM LiFe v0.7 with modified preloader
- alternative modem V51 S820
Good luck!
1eqinfinity said:
"Club of anonymous brickers"
Click to expand...
Click to collapse
:highfive:
1eqinfinity said:
(...) Finally, after finding the right ROM I got phone's screen blinking for a second, but still not loading and not functioning.
So, after some experiments I found out that fresh driver/tools versions do matter a lot and I managed to flash the same needed ROM with fresher tools. (...)
Good luck!
Click to expand...
Click to collapse
Thanks 1eqinfinity for confirming this :good: and I'm glad you were successful as well .
hello dear
I have samsung note3 clone sm-n9006 fcc id a3lsm-n9006 no way to flash it because of "enable dram failed (4032)" in FlashTool.
now phone is dead
How to fix it?
Please Help me Also
I rooted and Suddenly reset My phone My phone was Only showing Logo and i also Dont Have Any backup And I download Stock rom From Internet And Flashed My Phone By sp flash tool But After It Not Starting Please Help and Thankss Please
ShreyashM576 said:
I rooted and Suddenly reset My phone My phone was Only showing Logo and i also Dont Have Any backup And I download Stock rom From Internet And Flashed My Phone By sp flash tool But After It Not Starting Please Help and Thankss Please
Click to expand...
Click to collapse
Look for your phone on uncle Google and see what kind of hardware do you have....
After that you can repair the phone...
stympy said:
Look for your phone on uncle Google and see what kind of hardware do you have....
After that you can repair the phone...
Click to expand...
Click to collapse
My Phone Has Mt6582 Chipset And android lollipop
And It Doesnt Start
But Shows Com port On my pc i tried Flashing again By Sp flash tool but it say D Ram Fail
ShreyashM576 said:
My Phone Has Mt6582 Chipset And android lollipop
And It Doesnt Start
But Shows Com port On my pc i tried Flashing again By Sp flash tool but it say D Ram Fail
Click to expand...
Click to collapse
Can you tell me how many Gb have the internal memory and how much RAM?
NVM.
Try to flash one of this 3 Firmware. LINK HERE!
If you dont see anything inside the folders tell me! Or wait one hour to get uploaded!
stympy said:
Can you tell me how many Gb have the internal memory and how much RAM?
NVM.
Try to flash one of this 3 Firmware. LINK HERE!
If you dont see anything inside the folders tell me! Or wait one hour to get uploaded!
Click to expand...
Click to collapse
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
ShreyashM576 said:
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
Click to expand...
Click to collapse
Press on the "LINK HERE". Should take you to Google Drive.
Try second and third.
Should work.
ShreyashM576 said:
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
Click to expand...
Click to collapse
It worked? How about some feedback?
And witch one!
Giving Brom Error S NOT ENOUGH MEMORY when using Third rom with given Flash Tool and I tried It with The Latest version Of Flash Tool but Its Not working Now Trying Second Rom
ShreyashM576 said:
Giving Brom Error S NOT ENOUGH MEMORY when using Third rom with given Flash Tool and I tried It with The Latest version Of Flash Tool but Its Not working Now Trying Second Rom
Click to expand...
Click to collapse
Ok. Waiting for feedback.
Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
enricogambero said:
Hi there,
I need help on my Lenovo P780. I flashed it with P780_ROW_S124_140403_rooted_twrp_gapps ROM, procedure seemed to be ok but, after the green circle, I cannot switch on my smartphone anymore. Power+volumedown doesn't work and power+volumeup+volumedown as well. Now it's not recognized on my win7 pc! I tried to "uninstall" from device manager on my OS and then use the drivers contained in the .rar file "MTK_USB__Driver_GOOOOODDD" suggested some threads ago... but nothing happens, it's still an "unknown device" for Windows.
The only signal of life is the red light when the smartphone is connected to my laptop.
Please help me to solve this brick, I really do not know how to proceed.
Thanks in advance,
Click to expand...
Click to collapse
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
stympy said:
Reflash again with the corect preloader. You will find one around here.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
enricogambero said:
Hi stympy and thank you for your kind reply.
Actually I can't flash my phone because my SP Flash Tool doesn't move from 0% in its process.
Shall I try to format it?
Could you please help me explaining the process step by step?
Thanks in advance
Click to expand...
Click to collapse
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
stympy said:
Hi there again!
Seems to me that you have some problems with :
1. SP Flash Tool
2. Drivers!
Tell me what drivers do you use, and what FLASH Tool. In detail!
If this dont work maybe we can establish a connection with teamviewer, so i can see what tools do you use and what ROM.
Click to expand...
Click to collapse
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
enricogambero said:
Hi stympy,
I'm using SP Flash Tool V3.1304.0.sn119 (build: 2013/01/28 11:26 r1073)
About the drivers... I'm using "MTK USB driver" folder that you shared in a thread some time ago... where can I get the version? Here you can find in attachment a png screenshot, as you can see date modify of the files in the package. Unfortunately I can't get info from my Windows device manager because of the actual "unknown device" recognition of my P780
just in case, ok for the teamviewer session, thank you for your availability!
Click to expand...
Click to collapse
Hi there,
it seems that now the device is recognized by Win7 because it finished its driver installation.
In the device manager now I see a "MediaTek DA USB VCOM (Android) (COM11)"; anyway, I downloaded the latest version of SPFTools (v5.1352.01) but both of the instances stops at "searching" time and 0% of the flashing process.
Could please someone advise?
Thank you!
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
handshake1234 said:
Try to make sure the device is fully turned off. try to press the red button beside the battery. And then reconnect the cable while it is in the mode "Searching".. if it does not connect .. try unplugging and replugging it again.
Click to expand...
Click to collapse
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
enricogambero said:
After pressing the red button it got it up, thank you handshake1234. But flashing process stops later with the same error of the last ROM I tried to flash yesterday (attached).
Is that meaning I used another time a uncompatible ROM?
(Yesterday) S124_140403_rooted_twrp_gapps
(Today) P780_ROW_S123_131231_rooted_twrp_gapps
both for ROW.
Can anyone say something about the attached png error?
Thanks!
Click to expand...
Click to collapse
Try to flash with this preloader!
stympy said:
Try to flash with this preloader!
Click to expand...
Click to collapse
It worked!!! Thank you both very much for your help! You saved my phone!
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
khubayb1 said:
enrico, what did you do to let win7 recognize your phone ?
did you change try sereval cables etc ?
thank you
Click to expand...
Click to collapse
hi khubayb1,
I only pressed for a few seconds the small red button near the battery. I think it's like a harder reset. after pressing it, I tryied back to connect the phone to my pc and... voilà!
enricogambero said:
It worked!!! Thank you both very much for your help! You saved my phone!
Click to expand...
Click to collapse
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Go_to_sleep said:
I have the same problem. Sh1ts started when I try to make backups. First, Mobileuncle said: no sd card?' No sdcard0,nosdcard1. So I didn't make backup on my IMEI's. But that is is my little problem. Generally, I saw that there were 2 versions: 4gb Chinese and 8gb row. So i opened explorer and saw 8gb storage. I thoght that I'm row. But I coudn't see version of my rom. Whatever, I decided to flash Russian version VIBE 2.0 lite etc. with replaced files for 8gb. Instled drivers and flashtool. It always gave me same error: DRAM FAIL 4032. Then, I tried to flash cust. recovery for the model. After flashing recovery it wen into a brick or bootloop. Now the screen wan't turn on. I read your guidens above, but when I try to flash stock rom it says: dram fail 4032, cant change preloader with yours couse mdchecksum doesn 't get right. When i try to flash to flash Russian VIBE with your pleloader it says not enogh space 1011. I think the drivers work properly, because spft recognizes the device and see it on com8 etc...
I am really upset... please anwer. Thank you for being there for us.
Click to expand...
Click to collapse
Hi.
Go there and download your firmware !
Flash it !
For custom recovery go there and download ROW ONLY recovery(openrecovery-twrp-2.8.4.0rev2-p780row.zip)!
Creeate one folder, unzip the recovery img and Copy the scatter file from your firmware in that folder.
Here is one "small" tutorial for rooting!
If its not working PM me !
hi,
i killed my lenovo p780 by mistake.
i was flashing a costume rom using sp flash tool and in the middle of the process i canceled it.
after the cancellation the phone wont power or boot, doesn't react to any key and only a red light appears when i connect the phone to a usb.
i tried everything, the sp flash tool and the computer don't recognize the phone or any costume driver, only unknown device appears and none process starts.
the only time when something happens is when i connect the phone when trying to flash it and then push the red button, when i do that some process starts but after a minute it gives 'enable dram failed' error.
please help me !!!
tselitsky said:
hi,
i killed my lenovo p780 by mistake.
i was flashing a costume rom using sp flash tool and in the middle of the process i canceled it.
after the cancellation the phone wont power or boot, doesn't react to any key and only a red light appears when i connect the phone to a usb.
i tried everything, the sp flash tool and the computer don't recognize the phone or any costume driver, only unknown device appears and none process starts.
the only time when something happens is when i connect the phone when trying to flash it and then push the red button, when i do that some process starts but after a minute it gives 'enable dram failed' error.
please help me !!!
Click to expand...
Click to collapse
Because the flashing was stoped, your phone, more precise your preloader is messed up!
You must reflash by reinstalling the drivers. The whole process must be done again.
Look and read in Q&A Section. You will find some tutorials there!
You are not alone! There was some others who made this mistake!
Good Luck!
stympy said:
Because the flashing was stoped, your phone, more precise your preloader is messed up!
You must reflash by reinstalling the drivers. The whole process must be done again.
Look and read in Q&A Section. You will find some tutorials there!
You are not alone! There was some others who made this mistake!
Good Luck!
Click to expand...
Click to collapse
thanks!
i tried any driver i could find but the computer doesnt recognize the device (unknown device), can you point me a little bit?
please please help me !
tselitsky said:
thanks!
i tried any driver i could find but the computer doesnt recognize the device (unknown device), can you point me a little bit?
Click to expand...
Click to collapse
please help me
tselitsky said:
please help me
Click to expand...
Click to collapse
Hi. Please tell me if you can do a teamviewer connection. Ill contact you tomorow.
Sent from my Lenovo P780
stympy said:
Hi. Please tell me if you can do a teamviewer connection. Ill contact you tomorow.
Sent from my Lenovo P780
Click to expand...
Click to collapse
My problem is same, can you help me too?
dhweast said:
My problem is same, can you help me too?
Click to expand...
Click to collapse
yes,
id: 614 803 994
pass: 36ag3z
Hi. @tselitsky
@dhweast
Wait to get home! Now i am at work!
I will PM you in 5 hours! I do not know what time line are you. I am living in Romania.
GMT +3 is my hour!
stympy said:
Hi. @tselitsky
@dhweast
Wait to get home! Now i am at work!
I will PM you in 5 hours! I do not know what time line are you. I am living in Romania.
GMT +3 is my hour!
Click to expand...
Click to collapse
hi, i am GMT+2
tselitsky said:
hi, i am GMT+2
Click to expand...
Click to collapse
i am here !
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
plok08 said:
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
Click to expand...
Click to collapse
Hi. Let me see... You have the Lenovo P780 SPEED edition. This means that your phone after 04.2014. You need to flash your phone with the new preloader.
Look on your phone box, on the back of the box and read there.
Sooo.. Now because of this wrong preloader, your PC cannot detect your phone.
Now to reflash your phone you do all the things to prepare flash, press flash button,connect the phone, and now come the tricky part:
- open the back case of your phone and press small red button for 20 secconds. Not optional. More yes, less no.
Try this and tell me what happent.
Sent from my Lenovo P780
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
plok08 said:
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
Click to expand...
Click to collapse
Hi. Today i am not home.
Ill contact you tomorow, Monday 23.11.2015. Today i am in another town. Precious PC is home .
I am sory for the delay.
Please dont try anything till i contact you.
I dont want you to broke something more
Sent from my Lenovo P780
sure.. no worries..
Hi.. any news? sorry for bugging you too much...
plok08 said:
Hi.. any news? sorry for bugging you too much...
Click to expand...
Click to collapse
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
sure no worries...
if possible for fast q/a u can add me on skype.
skype id: plok08
thanks
stympy said:
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
abhishek.banerjee said:
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
Click to expand...
Click to collapse
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
stympy said:
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
Click to expand...
Click to collapse
Thank you and done
Sent from my LG-H950 using Tapatalk
abhishek.banerjee said:
Thank you and done
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
Unexpected event at work...
I have responded to you in private! Good Luck!
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Victor Oliveira said:
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Click to expand...
Click to collapse
Are you using SP Flash Tool on windows or linux?
I am using it on windows, but if necessary I can install Linux
Augustoandro said:
Are you using SP Flash Tool on windows or linux?
Click to expand...
Click to collapse
I am using it on windows, but if necessary I can install Linux
Victor Oliveira said:
I am using it on windows, but if necessary I can install Linux
Click to expand...
Click to collapse
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
Okay, I'll try and re-post the result here
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
So I took a look at this link, but there is no solution to this error, would you have any other tips on how to help me?
me too
Same problem here, I think is corrupted preloader.
Anybody?
brudieu said:
Same problem here, I think is corrupted preloader.
Anybody?
Click to expand...
Click to collapse
I also think that's it, did you solve it?
Victor Oliveira said:
I also think that's it, did you solve it?
Click to expand...
Click to collapse
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Augustoandro said:
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Click to expand...
Click to collapse
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
mine is till dead, I tried with linus but did not work
any Idea?
Victor Oliveira said:
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
Click to expand...
Click to collapse
Yes
brudieu said:
mine is till dead, I tried with linus but did not work
any Idea?
Click to expand...
Click to collapse
Mine is still dead, I do not even know what to do anymore, is yours also the kiicaa mix?
Solution
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Victor Oliveira said:
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Click to expand...
Click to collapse
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
brudieu said:
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
Click to expand...
Click to collapse
I used this rom https://yadi.sk/d/OBnsnz2t3RMo2B
and SP_Flash_Tool_v5.1628
thanks Victor Oliveira your solution worked a treat many thanks and a thank you sent