Related
This is going to be simply a collection of links with important points...Please read ALL directions and comments carefully...as no one is responsible for any damage to your phone.
NOTE 1: IF YOU ARE UNROOTED AND ALREADY UPDATED WITH OTA, YOU CAN STILL USE THE PROCESSES BELOW TO ROOT AND FLASH RECOVERY.
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 2: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 3: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you want to stop the OTA update notification, use this file which provides simple edits...but be careful as it may make further updates more difficult >> SCH-I500.DI01 Update
UPDATED:
OTA Update with Root and Busybox >> DH12 to DI01 update with root and busybox
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
My path.
1) Stock with root mentioned in this dev section
2)restored CW backup
3)used CW to install the update mentioned in this thread.
No problems so far.
After reading this thread again I went to stock and stock kernel. Rooted and gold again.
I think that CPU Scale app causes the Fascinate to shut down, so if you use it and getting them.... remove the app or let me know if you fixed.
Thanks!!!
Now, here is something I didn't try yet. I am still stock (not rooted), ran the OTA...and with all people having issues, I am scared to root. I want to try but I think I will wait and see if anyone else does this.
tats_06 said:
This is going to be simply a collection of links with important points...
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 1: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 2: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you don't care about root and want to install the OTA update manually >> SCH-I500.DI01 Update
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
Click to expand...
Click to collapse
I thought the post about doing the OTA manually would allow you to keep root, seeing that it's a stripped down version.
Let me clarify that. If that's the case, I can update the OP.
Restored, updated and Rerooted
All is well. No problems so far.
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
namebrandon said:
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
Click to expand...
Click to collapse
Thanks for heads up...first post updated.
Bump.... Back to top till this gets stickied!
wasupwithuman said:
Bump.... Back to top till this gets stickied!
Click to expand...
Click to collapse
Thanks! I just reported it too to request for sticky.
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
azalvarez03 said:
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
tats_06 said:
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
Click to expand...
Click to collapse
I don't think the update blocks root. you should be able to install the OTA as long as your not rooted, then once it is installed go ahead and root your device.
Ok...looks like root went thru...working on cwm recovery now.
OK, recovery installed successfully...running a backup right now.
Should I test restoring? Or should I assume I am safe?
Rooting after OTA update.
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
If you have CWM installed, you always have root via adb, which means you can get your root apps working.
If you're not running CWM, I don't know. Someone who's tried rage.bin post-update could tell you.
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
Yes you can root after update, I did it fine, but had to attempt it twice, the first try it hung, so had to do a battery pull, and then the second time it worked fine.
Nothing in the update seems worth it to return to stock (I've removed so many stock apps already.)
I'm having the Force Close loop issue. My CWR seems to be missing, as all I can access is Android system recovery <2e> with the options of:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Using the Odin method didn't work for me, on multiple tries. My SD card appears to be wiped clean and I can't enter debug mode.
Is there anything short of a miracle that I can do to fix my phone? I've seen a few posts with people saying they had similar problems as mine, but there was never and explanation of how or if they fixed there phone.
Thanks in advance
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.
EDIT: Turns out the root was not the problem. It was the developer edition firmware. I flashed the new firmware from the OTA update separately and now I'm booting fine.
If you have this exact problem, unbrick instructions here:
Try using Phone Flash Tool from the Dell site, and this zip:
https://mega.co.nz/#!Vgw1CTYT!y1_tSTCMmzrhJSQy0lxwY59iyRhdJovC-IDMF25PB4k
It's the new boot firmware binaries packed in the developer edition firmware zip with the xml changed to point to the new files.
For the flashing process of this zip, start with the tablet completely off and disconnected, then in Phone Flash Tool, load the zip file, click "Start to flash" (the button near the bottom should be blue/clickable), then once it's counting attempts (attempt #0, attempt #1, etc.) then connect USB. It should proceed to flash.
Click to expand...
Click to collapse
ORIGINAL POST:I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
xBIGREDDx said:
I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
Click to expand...
Click to collapse
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
vampirefo said:
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
Click to expand...
Click to collapse
What is the process to unroot on our device?
Install es file explorer or root explorer.
Grant root access to the app.
in es you need to enable root explorer in the settings menu.
Go to
Code:
/system/bin
delete su (mine was not locate in here)
/system/xbin
delete su (mine was here)
/system/app/Superuser.apk delete this
SuperSu has a selection of uninstall options in the app's menus.
vampirefo said:
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
Click to expand...
Click to collapse
I've applied plenty of OTAs in the past to other devices on top of rooted systems, and never had a problem as bad as bootlooping.
(Not saying it's not my fault, as I knew there was a risk, I guess I was just running on a series of good luck, or maybe other companies write better OTA pre-checking features.)
good you mentioned this
supersu - complete unroot - update worked
i forgot to uninstall xposed - modifications where gone after reboot (batterie percentage etc. from gravitybox)
has anyone tried rooting after update? could the kitkat method work?
kage69 said:
good you mentioned this
supersu - complete unroot - update worked
i forgot to uninstall xposed - modifications where gone after reboot (batterie percentage etc. from gravitybox)
has anyone tried rooting after update? could the kitkat method work?
Click to expand...
Click to collapse
It's hard to say, as lollipop was just released, only you guys with lollipop can test and see.
Neither SDC nor myself have lollipop so we can't test.
sent from my kingSing T1 via taptalk
On mine, I forgot to un-root with no issues, but it defaults to encrypting the tablet and now I can't re-root.
Hmm, I also had the developer firmware installed from their opensource site; maybe that's it? The only other thing would have been Busybox, I think...
EDIT: HEY IT WORKS! I just pulled the firmware binaries out of the update.zip, and flashed with xfstk-downloader, and now I'm on the Encrypting screen! Thanks!
old root method dont work :crying:
kage69 said:
old root method dont work :crying:
Click to expand...
Click to collapse
Well you tried, did you get an error? Can you give more details?
sent from my kingSing T1 via taptalk
xBIGREDDx said:
EDIT: Turns out the root was not the problem. It was the developer edition firmware. I flashed the new firmware from the OTA update separately and now I'm booting fine.
ORIGINAL POST:I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
Click to expand...
Click to collapse
Will the same rooting procedure work fine after you have upgraded to Lollipop on the 7840? Wanted to try but not sure if everything will work. Also since i'm on a Mac the .bat file doesn't run out of the box...
ely105 said:
Will the same rooting procedure work fine after you have upgraded to Lollipop on the 7840? Wanted to try but not sure if everything will work. Also since i'm on a Mac the .bat file doesn't run out of the box...
Click to expand...
Click to collapse
@kage69 says no, only you guys with lollipop can confirm or deny if root works or not.
sent from my kingSing T1 via taptalk
the tool flashes temp cwm but the tab dont boot to recovery
stays in bootloader where you can choose boot normal, power down and recovery
choosing recovery boots to stock recovery
there were errors while flashing, ill post them tomorrow
reading a book in bed on my lollipopped tab now
hope we can root it again, need that for customizations and airaudio
see u tomorrow
So how were you able to flash after bootlooping the first time when you tried to update with root? I cannot get into the bootloader or anything :silly:
Does any one have the ota so I can patch the stock firmware to investigate rooting it?
might be stored in cache i think
cant get to that without root
kage69 said:
might be stored in cache i think
cant get to that without root
Click to expand...
Click to collapse
Yeah I we hoping someone captured it before updating
xBIGREDDx said:
Hmm, I also had the developer firmware installed from their opensource site; maybe that's it? The only other thing would have been Busybox, I think...
EDIT: HEY IT WORKS! I just pulled the firmware binaries out of the update.zip, and flashed with xfstk-downloader, and now I'm on the Encrypting screen! Thanks!
Click to expand...
Click to collapse
Exactly which binaries did you flash back? In the zip I see:
dnx_fwr_ann_a0-mofd_v1.bin
dnx_fwr_ann_a0-mofd_v1-DBG.bin
dnx_fwr_blackburn_preqs_preqs.bin
dnx_fwr_blackburn_qs_qs.bin
dnx_fwr_preqs.bin
dnx_fwr_qs.bin
ifwi_ann_a0-mofd_v1.bin
ifwi_ann_a0-mofd_v1-DBG.bin
ifwi_preqs.bin
ifwi_qs.bin
ATT sent B180 down...
And of course, overnight, my phone tried to update - and is now stuck in a boot loop with TWRP.
Yay.
Hope everyone else is having a better day.
Rename
"/system/priv-app/DMClient/DMClient.apk"
by appending ".xxx" to the end using TWRP file manager.
Clear /cache partition.
Reboot and see if it works .
Paisley Pirate said:
ATT sent B180 down...
And of course, overnight, my phone tried to update - and is now stuck in a boot loop with TWRP.
Yay.
Hope everyone else is having a better day.
Click to expand...
Click to collapse
For those wondering about updating to B180.....
See this post and links in it for how we updated before if the phone was already unlocked bootloader/rooted (and for stock phones that can't OTA due to non-AT&T SIM) :
https://forum.xda-developers.com/showpost.php?p=73488912&postcount=1818
reloaded 170 full version on and it worked fine. Need to clean it up, as it threw the bloat back on - but didn't lose anything. Unfortunately, between 2 jobs, and moving (working on new house now, move in a couple weeks, then work on old house to sell it) I'm not seeing much time in my future to play with it much.
Is B180 rootable?
I imagine like the other version so far, it should be.
Ad86shwks said:
Is B180 rootable?
Click to expand...
Click to collapse
I have B170 installed. But I have it debloated, rooted, and custom recovery on it. I want to update to B180. Anyway someone can make it a standalone update? Like B170?
im waiting on the files from someone and i will release a b180 stock update as well as update my rom to b180 once i get the b180 files
b180 uploaded stock preroot atm will do full stock soon b180
i installed the b180 zip. There is one problem wifi is broken.
Thanks for the hard work to update to b180.
hi5five said:
i installed the b180 zip. There is one problem wifi is broken.
Thanks for the hard work to update to b180.
Click to expand...
Click to collapse
wifi is broke? i flashed it before i uploaded it worked fine try doing a clean flash format data system cache etc then flash
Did you previously have B170, then used your zip to update to B180?
madvane20 said:
wifi is broke? i flashed it before i uploaded it worked fine try doing a clean flash format data system cache etc then flash
Click to expand...
Click to collapse
i flashed b170 stock then flashed my b180 stock if wifi is broke i can redo it but it worked on mine just let me know
Question: If I unlocked the bootloader and Rooted at B140 but went back to fully stock b150 and than Flashed b160 Stock can I OTA b170 and b180 or do I need to flash? I want to keep this stock since I can't use a few apps rooted.
I believe you will need to flash updates as nobody has been able to OTA after unlocking the bootloader.
dabadguycr said:
Question: If I unlocked the bootloader and Rooted at B140 but went back to fully stock b150 and than Flashed b160 Stock can I OTA b170 and b180 or do I need to flash? I want to keep this stock since I can't use a few apps rooted.
Click to expand...
Click to collapse
divineBliss said:
I believe you will need to flash updates as nobody has been able to OTA after unlocking the bootloader.
Click to expand...
Click to collapse
I was able to update to b140 from b130 from a unlocked bootloader but that was from before I rooted.... It was before root was available.
Thanks for that detail. I wonder which partitions aside from the boot partition get modified after rooting that then breaks OTA from working.
dabadguycr said:
I was able to update to b140 from b130 from a unlocked bootloader but that was from before I rooted.... It was before root was available.
Click to expand...
Click to collapse
---------- Post added at 10:50 PM ---------- Previous post was at 10:35 PM ----------
I don't think there's any way to put your phone back to the state where an OTA will work - at least nothing we currently have on the XDA forums here that I've seen.
You could always try what you wrote below - I expect OTA will fail. If it fails, you could flash B180 - which I believe is unrooted from what I recall @clsA writing about his method to flash B180 in the B170/B180 thread by @madvane20 - but please double check on that before doing it since you want to be able to remain unrooted.
dabadguycr said:
Question: If I unlocked the bootloader and Rooted at B140 but went back to fully stock b150 and than Flashed b160 Stock can I OTA b170 and b180 or do I need to flash? I want to keep this stock since I can't use a few apps rooted.
Click to expand...
Click to collapse
divineBliss said:
Rename
"/system/priv-app/DMClient/DMClient.apk"
by appending ".xxx" to the end using TWRP file manager.
Clear /cache partition.
Reboot and see if it works .
Click to expand...
Click to collapse
hi thanks for this advice buy my device does not have this directory or files. I am in the same boat on 170 slim and fast, got AT&T update and now in force reboot update and fail loop. i really want to find a way to make it stop force rebooting? surely something i can do in twrp terminal. any advice? but alas I might just have to reflash.
make sure u mount system in twrp that folder and file should be there and make sure to clear cache like the other post said
Currently rooted and on 5.2.7.3 but having issue with single sign on apps not working as well and NBC.
NBC saying that I need the latest software.
I unblocked the updates and let it do a system update, and rebooted and then it tries to get 5.2.7.4.
So it is updated as much as it can be as far as I know.
I think I can use TWRP to flash 5.2.7.4 and then magisk and still remain rooted if I read that correctly.
I just can't find this OS anywhere.
Can someone please help..??
mytunes said:
Currently rooted and on 5.2.7.3 but having issue with single sign on apps not working as well and NBC.
NBC saying that I need the latest software.
I unblocked the updates and let it do a system update, and rebooted and then it tries to get 5.2.7.4.
So it is updated as much as it can be as far as I know.
I think I can use TWRP to flash 5.2.7.4 and then magisk and still remain rooted if I read that correctly.
I just can't find this OS anywhere.
Can someone please help..??
Click to expand...
Click to collapse
If you unblocked the updates, the ota updater should download the update (bin) file to the box.
Wait until the update app says that the download is 100% ready, reboot into TWRP and take a look at cache partition for the bin file (with TWRP file manager).
PS: If you flash that update, root is probably gone, maybe you brick the box...
Sus_i said:
If you unblocked the updates, the ota updater should download the update (bin) file to the box.
Wait until the update app says that the download is 100% ready, reboot into TWRP and take a look at cache partition for the bin file (with TWRP file manager).
PS: If you flash that update, root is probably gone, maybe you brick the box...
Click to expand...
Click to collapse
Thank you!
And maybe i'll wait for the prerooted version LOL