Hi guys Im new here.
Today i just downloaded superflashlight.apk file from web(not from playstore) and installed using 'verify and install' option.then Google recommended.that you should not install this app cause it contains some code that bypass android security... .I ignored it and installed.but after 1 minute my phone started restarting.I removed battery and again same problem.It boots for only 5 seconds and then restarts, Its like a circular Loop that never ends.
So factory reset was only the option.I tried going into settings as fast as i can but it gets hangs and restart before I reach the 'Erase Everything' option.
So I tried resetting using volume+,-and power button and i got shocked:crying: I still can't reset cause,my 'Menu' button works only once then its like a dead(means i can select wipe/factory data but can't select submenu 'yes').Can't do anything.I've also tested it n factory mode->Full test. and there also my back button and menu button was not getting detected. So I hv only option left that i should reset using pc/laptop
Anyone pls suggest me how can i do that.(remember that phone gets restarts in 5sec after every boot.)
Related
I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
accurato said:
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
Click to expand...
Click to collapse
You may need to reset your device. Reset (or normal) software on your device deletes all active program memory and close all active programs. This can be useful when your device is running slower than normal, or programs that are not performing well. Soft reset is required after installation of some programs. If a soft reset when the program is running, unsaved work
will be lost.
To perform a soft reset
1. Pull out the stylus.
2. Use the stylus tip to press the RESET button located at the bottom of the device. Your device restarts and go to the boot loader and reflash with an official ROM for your device !! if the problem continues try to hard reset A hardreset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Warning! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset.jika problem continues try to hard reset A hard
reset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Important! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset. To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes. and try to re-Flash again !!!! I hope you succeed
I have tried the hard reset also but with no luck. I think the op system is corrupt. Even from the SD card it just hangs at 0% they all do. I am using the same comp. and cable that was used to flash it the first time with positive results. The hard reset works it loads then goes into touchpro loop on startup.
Yesterday I rooted my LG Optimus L9 using LGpwn tool, after that it worked just fine.
This morning I tried to install ClockworkMod Recovery. Using this post. It explains how to download and install CWM Recovery from app that you downloaded in form of APK.
This method did not work 100%, but I was able to reboot normally, so in post it said that sometimes it does not work and you need to download and use Busybox installer Link to busyboxx.
After this I managed to boot in too CWM using app from mentioned thread.
Then problem occurred. After I saw CWM was working I selected reboot device option.
Except now when it started to boot it stops right after Second LG logo (First is static one second one is animated).
I get white screen with "Encrypting" on top and gray line. And one Reset Phone button. IMG they are Dropbox links.
This is followed with Error : Unfortunately, the process com.android.phone has stopped. IMG
I am able to boot in too CWM and I have tried flashing something like Cyanogenmod but I get error Status 7. Tried removing line that checks model, no use.
Tried clearing every cache and fixing permissions, nothing. Formatted everything still no use.
Dear XDA community That you in advance.
I fixed my phone by going into SW upgrade mode, and using the Upgrade Recovery function of the LG Software Update tool or whatever. Be sure you don't have any http servers open
Sent from my LG-P769 using XDA Premium 4 mobile app
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
pigmich said:
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
Click to expand...
Click to collapse
I had this problem too...
You can also try, start upgrade tool, Remove battery -> press volume up + insert usb with upgrade tool open, it will detect, insert battery then go to extras and click upgrade-foutherstel (is in dutch for me)
Then it will all work, I can't even install a custom rom My bootloader is unlocked, rooted phone, installed recovery, see my thread about the error I get!! please!
help lg p768 encrypting error problem
can someone help me please.
i have the same problem from the starter of this thread..
installed recovery apk and goes to encrypting error.
i dont know what to do and how to begin to solve my phone problem.
thanks
Hi I have a LG F100S (LG OPTIMUS VU)
The phone is restarting itself sometimes and after uninstalling programs and files the programs and files are coming back. I also tried uninstalling from google play but programs keep coming back. Also my phone is giving warning as Unfortunately xxx. program.stopped.
I tried safe boot by pressing long to turn off and the device asked me to confirm safe boot but the restart was not in safe boot.
I moved the battery and placed it back (the battery is not removable its attached with a screw)
I try factroy reset from the app menu but it didnt worked as well.
I tried to delete files from settings / storage but files came back.
I tried to hard reset by key combination but i recieved the dead android robot with a caution mark in a triangle in his chest.
I tried to go in to recovery menu by pressing home touch button and I have the Android system Recovery 3e screen as:
Volume up/down to move highlight:
enter button to select
reboot sytem now
apply update from ADB
wipe data/factory reset
wipe cache partition
I can highlight these options with volume keys where as I cant select it. I tried all of the buttons on my phone but can not be able to select any of these options.
My phone is not rooted. I also used LG Mobile Support tool to update my firmware from V40C to V40E the process done without anyproblems but when the phone restarted the firmware was same V40C.
My problem is my phone seem to be in a kind of boot loop. Maybe the clean master is causing the problem or some other software
I can use my phone for hours only I am receiving unfortunatelly.xxx.program.stopped. and I cant unistall programs or dlete files or install new programs.
hope I can take some help.
Note I searched the google and XDA for a solution but there was no helpful answer.
Ok so in a nutshell I was trying to FRP unlock my friends phone. Problem is that it kept bringing up an error while loading the setup. I finally got it to where i input the account information (as the owner) and I was able to open settings through bugging out the voice search (I also could open file manager).
I noticed unknown sources was greyed out.
Before consideriing doing a factory reset I went ahead and took my friends advice and stopped setup.apk and google play services.apk
When zi went to clear the data it ended up taking me to the very first start screen, I was just a few steps from completion.
Now after I say setup new device the phone switches between activating network and clicking setup new device. Even clicking emergency call does nothing.'
Meanwhile when talkback is on she informs me how every single play services, gmail, and contact app stop working.
In summary, I want to factory data reset the phone.
Chimeratools. load stock firmware -> reloads firmware but doesn't wipe the current data (refurbish not available for this device, only load)
LGUP -> Load is available, but refurbish is not
Hard Keys -> Apparently the G5 doesnt have hard key capability
TWRP -> thing is not oem unlocked
ADB into stock recovery -> ADB will not work.......not usb debugging.
Please assist
With the phone shutoff hold volume down and power, as soon as you see the lg screen release the power button then quickly repress it. make sure to not let go of the volume down button. it might take a few tries but you should be able to get into factory reset menu
firenemesis7 said:
With the phone shutoff hold volume down and power, as soon as you see the lg screen release the power button then quickly repress it. make sure to not let go of the volume down button. it might take a few tries but you should be able to get into factory reset menu
Click to expand...
Click to collapse
This doesn't work...no matter how many times you try the volume down/power release and reapply procedure ...it never get in to factory reset mode. Any other ideas?