Related
Is it possible to power an HTC HD2 without a battery or the back cover? I found one about an hour ago in my downtown area, missing a SIM card and missing the microSD card. As noted it doesn't have a back cover or a battery, so my intention was to attach a "standard" 5V/1A cell phone battery charger. I figured out from a picture of the battery that if I've got the HD2 flat on the display and I'm looking at the back, the positive terminal will be the one on the left but, when I attach the power supply (which I tested before this attempt, it works) leads using micro-alligator clips and push the power button (front of display, button furthest on the right, I think, never used one of these HD2's before) I get no response.
Now, the question is either a) am I not getting any response at all because the HD2 can't be powered up in this manner because there's no back cover or b) it's more likely to be completely toast because of the damage it apparently suffered in the drop that shattered the glass. The only damage (aside from the glass) is a very tiny scrape/scuff mark on the top right corner of the bezel - obviously that's where it hit the ground.
I don't own any of these apparently micro-USB style connectors (or is it mini-USB, I can't figure out which is which I suppose). Bleh, I just looked at a pic I found with Google Images, apparently it IS a micro-USB connector.
All blabbering aside, even if I had such a connector or a power supply using such a connector, is the phone going to even power up without a back cover on it or battery inside? I know a lot of devices become totally disabled when the back cover is removed (as my Dell Axim X51v does; as soon as I even throw the lock switch to unlock the back cover that disables the device totally.
Anyone able to provide some tips or suggestions? I have no way of knowing who it belongs to so I'm claiming it, and if I can verify it might work or does still function I might be willing to put some money into getting the glass/digitizer replaced, a new battery, power adapter, etc.
Anything at all would probably be quite helpful.
Thanks...
The HD2 works without back cover!
The HD2 doesnt work without battery...!! I've never heard of a mod to enable switching it on through micro-usb.
Be carefull you could be scammed...buying a phone in that state, because of the hit some other components may be damaged!! It depends on the price and money you're willing to risk!
no problem with powering on without the backcover. did that many times before.
but i guess its not possible without a battery...
DN41
Ah, ok, so the fact that there's the two metal 'dots' on the HD2 that apparently become a connection when the metal battery cover is in place don't affect powering it up, but no battery keeps it dead? Hrmmm...
Ok, if someone that owns an HD2 can confirm that it becomes very useful info. Take the back cover off, take the battery out, and tell me if plugging in a micro-USB cable (either from a computer USB port or from the AC adapter) allows it to function at all, and then try the same thing with the cover on (don't put the battery in, however).
So there's 3 possibilities:
1) It'll work off the micro-USB power with no battery and no cover
2) It'll work off the micro-USB power with just the cover installed but no battery
3) It'll work off the micro-USB power with no cover but with a battery installed
and actually the fourth possibility which doesn't matter in my case:
4) It'll work off the micro-USB power with the cover and the battery installed
Dammit I hate it when I find stuff like this and can't get it functional.
Again, thanks for any suggestions - and I didn't buy this phone, I found it a few hours ago, on the ground as I was walking home. I wouldn't buy something in this cosmetic condition unless I knew it was working even in spite of the cracked glass. I've owned iPhones with horribly shattered glass on them but they still function, even all the multitouch functionality is still working - that's my hope here, that this device will still work just fine and if it does then I'll pay to replace the glass/digitizer.
Thanks
Edit:
I think I just realized that the metal contacts on the inside of the back cover and those 'dots' could be because the HD2 is using that battery cover as a Wi-Fi antenna, plate-style antenna.
I just tested it for you. Without the battery in there is no starting it, period.
Might I suggest though that you ask around and find a mate with a microUSB, (you must have someone that has one), and plug it in when the battery contacts are jumped. It will probably work that way. I'm not going to try it because I have a perfectly good phone and have always mistrusted elec-trickery...
those spring loaded studs have been the subject of much discussion, with no definitive answer,, stop the cover rattling, grounding plate for the antenna, remnants of an unreleased car kit,,, who knows. certainly signal doesn't appear diminished with the cover off, and on the inside of the cover there is no coating on the metal where they connect, indicating a signal being passed so who knows.
i suspect simply attaching power to two contacts isn't enough because the third contact is expecting a signal of some kind? perhaps a connection from the battery charge protection circuits?
you could always buy a cheap copy battery from ebay, and just resell it if it doesn't work, or run a scam on your insurance with it? (did i just say that out loud??)
I'll say this again: I found the phone on the ground on the side of the street while walking home a few hours ago.
I don't use T-Mobile service and I have no intentions of using it as a phone; I already have a phone so I was going to use it as a portable media player sorta like an iPod touch if I can verify it works 100% and just needs a battery/back cover/replacement glass and digitizer. That's my intention at this point.
And I was thinking that yes it won't work at all without a battery so, thanks again for the info. I'll head out this morning to a T-Mobile store (actual T-Mobile and not a reseller) and see what they can tell me. Surely they'll have a battery/back cover and potentially an AC adapter to verify if it's 100% dead of somewhat functional even in spite of the busted glass.
Let's hope it works...
what about searching the owner?
DN41
Well, let's see:
- I can't power it up
- It has no SIM card
- It has no microSD card
- The only way to track the owner would be using the IMEI and I'd have to go to a T-Mobile store to do that, when that's done and they get the number, if the phone was stolen and then dumped in the trash/on the street where I found it, they call the police and I get in a bit of trouble for no good reason
That pretty much covers it.
okay, you're right...
i cant imagine how it landed there...
who would throw it just away?
sure that its a real phone and not a dummy?
DN41
DN41 said:
okay, you're right...
i cant imagine how it landed there...
who would throw it just away?
sure that its a real phone and not a dummy?
DN41
Click to expand...
Click to collapse
i was in a thread yesterday where some guy talked about how he dropped his phone by accident whilst 'driving along with it in his hand, with his arm out of teh window', so yea, some people are , , well, insert your own noun here
oh no...how can you hold your arm out of the windows with a 500€ phone in your hand?
i just cant understand some people...that doestn go in my mind...
DN41
samsamuel said:
i was in a thread yesterday where some guy talked about how he dropped his phone by accident whilst 'driving along with it in his hand, with his arm out of teh window', so yea, some people are , , well, insert your own noun here
Click to expand...
Click to collapse
I thought the same!
br0adband said:
they call the police and I get in a bit of trouble for no good reason
Click to expand...
Click to collapse
Not really mate. I found an iphone 4 yesterday and managed to get it back to its rightful owner. Took a couple of hours out of my day but what else could i do?
sike222 said:
Not really mate. I found an iphone 4 yesterday and managed to get it back to its rightful owner. Took a couple of hours out of my day but what else could i do?
Click to expand...
Click to collapse
Well, Yeah, with an iPhone 4 what else WOULD you do if you don't want the surgery to be able to use it! LOL
Also think if it was your phone! I'd be absolutely gutted, and very glad to get it back. But maybe it's unregistered (through the IMEI) or not been reported as missing.
In the UK (don't know about elsewhere) if you report that you found something to the police (I found a £50 note) and no one can show that they own it then it's yours after about 28 days.
Unless you have really dumb cops then you shouldn't get into trouble if you take it in!
On the other hand you may find the battery and/or cover if you look carefully in the area where you found the phone.
Sam.
br0adband said:
Ah, ok, so the fact that there's the two metal 'dots' on the HD2 that apparently become a connection when the metal battery cover is in place don't affect powering it up, but no battery keeps it dead? Hrmmm...
Ok, if someone that owns an HD2 can confirm that it becomes very useful info. Take the back cover off, take the battery out, and tell me if plugging in a micro-USB cable (either from a computer USB port or from the AC adapter) allows it to function at all, and then try the same thing with the cover on (don't put the battery in, however).
So there's 3 possibilities:
1) It'll work off the micro-USB power with no battery and no cover
2) It'll work off the micro-USB power with just the cover installed but no battery
3) It'll work off the micro-USB power with no cover but with a battery installed
[snip]
Thanks
Edit:
I think I just realized that the metal contacts on the inside of the back cover and those 'dots' could be because the HD2 is using that battery cover as a Wi-Fi antenna, plate-style antenna.
Click to expand...
Click to collapse
I think those contacts are just to ground the back cover to stop it causing interference. It doesn't seem to affect the phone if I don't have it on or am using the plastic cover with my big battery.
On a similar theme, does anyone know if it is possible to power the HD2 from the micro USB supply while I swap batteries. I don't want to have to do a soft reset which loses what you are doing. But I'm worried that without the battery to absorb the power there is a risk of damaging the circuits?
I don't want to just try it because I already blew my main board by powering the USB through a cheep adapter and a Nokia charger that supplied too much power and had I to get it repaired/replaced. I'm hoping someone already knows
Sam
samsamuel said:
i was in a thread yesterday where some guy talked about how he dropped his phone by accident whilst 'driving along with it in his hand, with his arm out of teh window', so yea, some people are , , well, insert your own noun here
Click to expand...
Click to collapse
did we ever get an answer as to why that, im going to select the noun "twat" was dangling his hd2 out of the window @ 40mph??
I need closure on that one.....
My HTC Amaze will not hold a charge. I am using the stock included USB Wall plug and the Micro EXT 12 Pin Cable which only comes with the AMaze (it is also included with the Flyer Tablet). When I first plug in the phone to charge the charge light blinks orange for five minutes and then remains solid. When I return hours later the light is totally out (no green indicator light showing a full charge which I used to get). When I try to turn on the phone the Screen flashes for a split second but nothing happens.
I tried to troubleshoot by swapping in my HTC Sensation battery and that does power up the AMAZE. I have now switched the included Amaze charger with the one that came with the HTC Sensation. The orange power light comes on immediately although it only blinked with the other charger. I am worried that maybe the Power adapter is frying my batteries.
Does anyone know if these included chargers share the same specifications for the Sensation, Amaze etc??? Anyone else experience this problem??
The only thing I can think of is your version of Recovery. I know that the phone will not charge while it is turned off if you have not flashed the most recent version that includes the fix for this problem. Try turning the phone on and then plugging it in to the charger.
brianbmb said:
The only thing I can think of is your version of Recovery. I know that the phone will not charge while it is turned off if you have not flashed the most recent version that includes the fix for this problem. Try turning the phone on and then plugging it in to the charger.
Click to expand...
Click to collapse
Is there a fix for this problem? Does the version of recovery affect the phones ability to charge when its turned off?
either recovery or faulty battery! what happens when you put amaze battery in to sensation?
HTC Amaze Battery
When I put the HTC amaze battery into the Sensation and try to charge it the light blinks. Then after 5 minutes goes solid orange. After hours the light shuts off and I unplug it and try to power up but NOTHING. Dead. I purchased two Anker batteries, tried to charge them in Sensation. One works fine but cannot be charged in the HTC Amaze. I have even tried it with both the White Amaze USB cable and both the HTC Amaze included charger and the Sensation included charger. ( I believe they are the same model). Could it be the USB connection is somehow not allowing the phone to charge?
Doesnt HTC warranty the battery for any period of time???
schlockmaster said:
Is there a fix for this problem? Does the version of recovery affect the phones ability to charge when its turned off?
Click to expand...
Click to collapse
Yes, there is a fix if that is indeed the issue. Are you able to determine what version of recovery you are using? It could still be a faulty battery though.
Upgrading my phone from a SGS 4g
I heard that the Battery is a big issue on this phone.... can someone tell me if they fixed it with updates or is it still a problem because i really love the camera on this one and im really loving the design but there were other statements abt poor reception in some areas which leaves me in doubt.... Bottom line should i go for Galaxy s 2 over this???
chamalgsg4g said:
I heard that the Battery is a big issue on this phone.... can someone tell me if they fixed it with updates or is it still a problem because i really love the camera on this one and im really loving the design but there were other statements abt poor reception in some areas which leaves me in doubt.... Bottom line should i go for Galaxy s 2 over this???
Click to expand...
Click to collapse
After rooting and using custom roms I don't think there is any battery issues. IMO Battery life is great. Phone is still one if not the best and can be in the top best phones for a while, only thing right now is development. If your all about development then go with s2 if not then amaze. I'm happy with what I have
Sent from my HTC Amaze 4G using xda premium
Tell me something, what is it that really drains the battery on the Amaze? Is it the 4G? Thing is, my device would be on WiFi for the majority of the day. I've seen some apps where you can auto switch network based on proximity. So I'd only be using 3G/4G while I'm in transit.
Also, is there a way to disable 3G/4G so as to only get EDGE?
jaywhy13 said:
Tell me something, what is it that really drains the battery on the Amaze? Is it the 4G? Thing is, my device would be on WiFi for the majority of the day. I've seen some apps where you can auto switch network based on proximity. So I'd only be using 3G/4G while I'm in transit.
Also, is there a way to disable 3G/4G so as to only get EDGE?
Click to expand...
Click to collapse
When I walk in my house, my WiFi comes on and 4g turns off... No special app... I think its a feature of the ROM I use. Sometimes it doesn't kick in until I open my WiFi networks though. If you have WiFi on though when you aren't connected to a network, the constant scanning will drain your battery.
Also, other things that drain the battery:
Sense Widgets... Although attractive, huge battery Hog
Live Wallpapers - Duh
Overclocked Kernels... Faster performance = Faster drain
Heavy usage... When the screen is always on and the data network is constantly being used, it also drops.
On the new Energy ROM, its nice because when your phone is not being used, neither is your battery. My phone went 3 hours with only changing 1%.
Sent from my HTC_Amaze_4G using xda premium
Did somebody make a statistic - which SOFTWARE drain battery more quick on Amaze?
Are there any apps that select Wifi based on your GPS location? I'm just trying to figure out how I can get this phone and actually be able to use it without having to pull an arm and a leg.
Battery issues
hey guys, i've had an amaze for about a month now, and these last 2 weeks that i've had it, the phone will randomly shut off once a day when im at or around 50%. I'm not sure if this is a battery or a hardware issue. I have used a non-stock charger and cord to charge it 2 times a week so i'm not sure if this might have anything to do with it. I have the official unofficial ICS update, did a full wipe, relocked the bootloader and unlocked it again and basically put a clean ICS on it. Any help or suggestions would be greatly appreciated.
Arcandel said:
Did somebody make a statistic - which SOFTWARE drain battery more quick on Amaze?
Click to expand...
Click to collapse
You mean, like the battery use graph that Android provides?
jaywhy13 said:
Are there any apps that select Wifi based on your GPS location? I'm just trying to figure out how I can get this phone and actually be able to use it without having to pull an arm and a leg.
Click to expand...
Click to collapse
Llama. It doesn't even use GPS, it uses cell towers to determine location, which your phone's doing already.
a.benjamin76 said:
hey guys, i've had an amaze for about a month now, and these last 2 weeks that i've had it, the phone will randomly shut off once a day when im at or around 50%. I'm not sure if this is a battery or a hardware issue. I have used a non-stock charger and cord to charge it 2 times a week so i'm not sure if this might have anything to do with it. I have the official unofficial ICS update, did a full wipe, relocked the bootloader and unlocked it again and basically put a clean ICS on it. Any help or suggestions would be greatly appreciated.
Click to expand...
Click to collapse
I've seen reports like this that were resolved by a new battery. Could be the handset, though.
jaywhy13 said:
Are there any apps that select Wifi based on your GPS location? I'm just trying to figure out how I can get this phone and actually be able to use it without having to pull an arm and a leg.
Click to expand...
Click to collapse
Proximity WiFi is a very light weight app for this.
Sent from my HTC_Amaze_4G using XDA
HTC Amaze is 12 Pin Charging - Beware !!!!!
schlockmaster said:
My HTC Amaze will not hold a charge. I am using the stock included USB Wall plug and the Micro EXT 12 Pin Cable which only comes with the AMaze (it is also included with the Flyer Tablet). When I first plug in the phone to charge the charge light blinks orange for five minutes and then remains solid. When I return hours later the light is totally out (no green indicator light showing a full charge which I used to get). When I try to turn on the phone the Screen flashes for a split second but nothing happens.
I tried to troubleshoot by swapping in my HTC Sensation battery and that does power up the AMAZE. I have now switched the included Amaze charger with the one that came with the HTC Sensation. The orange power light comes on immediately although it only blinked with the other charger. I am worried that maybe the Power adapter is frying my batteries.
Does anyone know if these included chargers share the same specifications for the Sensation, Amaze etc??? Anyone else experience this problem??
Click to expand...
Click to collapse
This link shows the new 12 pin technology that MUST be used with the Amaze. This is a real pain, just purchased two HTC-Amaze phones and taking them back for the Galaxy.
I hate it when they change technology and make all your charging cords in your phones and your computers obsolete and don't tell you. Also, the Amaze is designed for European drivers. The charging cord plugs into the left-upper middle of the phone and it is dangerous to pick up to unplug wile driving because the cord hits the steering wheel. How do you spell DANGER? Really heavy and clunky phone too. Galaxy has bigger screen and is lighter - another reason to pass on the Amaze. Be careful with this phone if you aren't aware it is in a tech world of it's own. Just replacing the charging cords in our autos and computers cost more than the phone. Sheesh!
Here is the link to help you from T-Mobile support.
//support dot t-mobile dot com/docs/DOC-3062 Turn the dot to a period in each case in your browser and you should be able to go to the T-Mobile page.
DesertCactus said:
This link shows the new 12 pin technology that MUST be used with the Amaze. This is a real pain, just purchased two HTC-Amaze phones and taking them back for the Galaxy.
I hate it when they change technology and make all your charging cords in your phones and your computers obsolete and don't tell you. Also, the Amaze is designed for European drivers. The charging cord plugs into the left-upper middle of the phone and it is dangerous to pick up to unplug wile driving because the cord hits the steering wheel. How do you spell DANGER? Really heavy and clunky phone too. Galaxy has bigger screen and is lighter - another reason to pass on the Amaze. Be careful with this phone if you aren't aware it is in a tech world of it's own. Just replacing the charging cords in our autos and computers cost more than the phone. Sheesh!
Here is the link to help you from T-Mobile support.
//support dot t-mobile dot com/docs/DOC-3062 Turn the dot to a period in each case in your browser and you should be able to go to the T-Mobile page.
Click to expand...
Click to collapse
I use a standard micro USB to charge my Amaze. Works fine.
I think you may mean "designed for English drivers", since they are the only European country that drives on the left side of the street and thus have the driver on the right side. But in any case one is not supposed to be messing around with the power while driving anyway.
DesertCactus said:
This link shows the new 12 pin technology that MUST be used with the Amaze. This is a real pain, just purchased two HTC-Amaze phones and taking them back for the Galaxy.
I hate it when they change technology and make all your charging cords in your phones and your computers obsolete and don't tell you. Also, the Amaze is designed for European drivers. The charging cord plugs into the left-upper middle of the phone and it is dangerous to pick up to unplug wile driving because the cord hits the steering wheel. How do you spell DANGER? Really heavy and clunky phone too. Galaxy has bigger screen and is lighter - another reason to pass on the Amaze. Be careful with this phone if you aren't aware it is in a tech world of it's own. Just replacing the charging cords in our autos and computers cost more than the phone. Sheesh!
Here is the link to help you from T-Mobile support.
//support dot t-mobile dot com/docs/DOC-3062 Turn the dot to a period in each case in your browser and you should be able to go to the T-Mobile page.
Click to expand...
Click to collapse
As mentioned, conventional microUSB cords work fine, and some of HTC's own documentation says so, some even recommend it. I do find I get a better/faster charge using HTC's cables,but they are functionally the same as microUSB. The odd connector is more secure, though -- it's longer and inserts further in the socket.
You should not be picking up or juggling your phone while driving. Period. End quote. Just don't.
I am also disappointed to the Nth degree with the Amaze, actually not so much the phone which is lovely and solid and attractive and loaded with hardware features, I'm furious with HTC's absolutely stupid mess with drivers, and refusal to quickly resolve issues with the software. It's October, 10 months after purchase, and I have problems with WiFi, Android Beam, Bluetooth, surprise shutdowns (just finding the phone has turned off by itself). In short, it's failed to function as a reliable phone.
I'll never buy from them again. Never. Ever. Google Nexus phones for me from now on, and not on a carrier contract either. I've been burned for the last time.
Thread moved to Q&A.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
ChromeJob said:
As mentioned, conventional microUSB cords work fine, and some of HTC's own documentation says so, some even recommend it. I do find I get a better/faster charge using HTC's cables,but they are functionally the same as microUSB. The odd connector is more secure, though -- it's longer and inserts further in the socket.
You should not be picking up or juggling your phone while driving. Period. End quote. Just don't.
I am also disappointed to the Nth degree with the Amaze, actually not so much the phone which is lovely and solid and attractive and loaded with hardware features, I'm furious with HTC's absolutely stupid mess with drivers, and refusal to quickly resolve issues with the software. It's October, 10 months after purchase, and I have problems with WiFi, Android Beam, Bluetooth, surprise shutdowns (just finding the phone has turned off by itself). In short, it's failed to function as a reliable phone.
I'll never buy from them again. Never. Ever. Google Nexus phones for me from now on, and not on a carrier contract either. I've been burned for the last time.
Click to expand...
Click to collapse
From what I've read, the shutdowns may be caused by the battery. You might want to try replacing the battery you are using. So far I have not found one better than the OEM.
So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Burkejt1 said:
So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Click to expand...
Click to collapse
Ur pretty much screwed bro
Do you not have insurance on your line?
Check out TeamBAMF's marketplace... they have some Thunderbolts and Rezounds for sale there.
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Antoine.WG said:
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Click to expand...
Click to collapse
Putting it on a charger doesn't even make any sense
Antoine.WG said:
Plug it into a charger, wrap it in a paper towel and put it in a bag of dry rice and let it sit for a few days. I've saved an iPhone and a camera that way.
Click to expand...
Click to collapse
Why do you plug in the charger?
Perhaps a little heat to help drive out the water? Just my guess.
Sent from my ADR6425LVW using Tapatalk 2
Burkejt1 said:
So in the beginning of July I dropped my Rezound in some water, and it voided those water sensors on the back, and thought it has been functioning fine, you can notice that there is/was water under the very back of the screen when it is a white screen and it messes up from here to there but has worked alright. So I used my upgrade in March to get this phone and Verizon basically said I can buy a new phone at full price or else I'm screwed and stuck with it. Besides just finding someone on craigslist, ebay, etc.. anyone got any ideas on how I can get a new Rezound on the cheap or anything else 4g from Verizon on the cheap that isn't a turd, or somehow I can get a discount?
Just looking for any input, I'm fine with it now, but it's just annoying, and I'm not sure how long the phone will be operational.
Click to expand...
Click to collapse
You can buy replacement stickers on Amazon.... Replace the stickers and warranty that ****
Sent from my ADR6425LVW using xda premium
topgun1953 said:
Why do you plug in the charger?
Perhaps a little heat to help drive out the water? Just my guess.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Antoine.WG said:
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Click to expand...
Click to collapse
No, it doesn't work without a battery. Unless your in bootloader.
Sent from my ADR6425LVW using Tapatalk 2
Antoine.WG said:
Exactly. Putting it on the dashboard of your car works too, just make sure it's completely covered in rice so it doesn't get too hot. After all, you can bake cookies on your dashboard nowadays.
Oh! I forgot to mention taking the back off, for better airflow. Removing the battery, SIM and SD card don't hurt either, but I don't think the charger will work if you remove the battery. None of my other phones ever have but I've never tried it with my Rezound.
Click to expand...
Click to collapse
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
AshtonTS said:
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
Click to expand...
Click to collapse
Just like Pokémon.
Sent from my viperRez
wlmeng11 said:
Just like Pokémon.
Sent from my viperRez
Click to expand...
Click to collapse
exactly!
Tag798 said:
You can buy replacement stickers on Amazon.... Replace the stickers and warranty that ****
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Whaaat theres no way
Thanks for the input everyone
AshtonTS said:
Putting it on the charger can make the water damage worse. Put it in the sun or something but don't put it on the charger. Water + electricity = kablam
Click to expand...
Click to collapse
He did say it's been working fine other then the water in the phone...
You can check the marketplace here on XDA too. I've seen some rezounds for around $200.
We're only talking about 5V, 1A, which isn't a lot of power. Yes, at high voltage or high current, water and electricity don't mix but I'm sure he's charged it since he dropped it. I've saved devices in exactly this way in the past. Screens are the the hardest part to save, though. The touchscreen on my old iPhone needed to be replaced because the bottom half stopped responding to touches and the camera has a very faint shadow in the screen if you hold it at a certain angle in bright light. Both devices otherwise work perfectly but I hardly use them any more because they've been replaced by my Rezound.
Hey guys,
I went out on a limb and bought the OWL car charger+dock for my DNA.
There is a bunch of discussion on the item here: http://forum.xda-developers.com/showthread.php?t=2029734 along with plenty of pictures.
I wanted to let you guys know some specifics for the DNA:
1. The phone fits perfectly into the clip. I don't have any cases, so I can't test that, but naked the phone fits like a glove and is very secure, even upside down.
2. Even the "second generation" of charger still does not put out enough juice for the DNA, even with the phone at idle.
I have emailed Moon and will update this thread when I hear back from him. I am thinking the problem might have something to do with the controller inside the charger. It switches to red (charging) momentarily when the phone is inserted, but then switches back to green (full).
bmyton said:
I have emailed Moon and will update this thread when I hear back from him.
Click to expand...
Click to collapse
Update 1: Moon has emailed back already to assure me that if the charger doesn't work, he will do what it takes to make it right.
I am hoping we can figure out a way to make the phone work in the charger, since I love the design and the convenience of Qi...
awesome! I have been wondering if it works for our phone since I saw the post you linked above about a week ago. I emailed moon about it, but he was unsure. I'm glad that someone confirmed what I have been wondering. Thanks again
I'm also looking forward to more info on this. Going through the website I couldn't quite follow if it worked or not.
Update 2:
The Qi charging coil built into the CarPad does work to charge the HTC DNA, unfortunately the coil is positioned about 0.5" too low for the phone.
Moon is working on an adjustment to the circuit board to re-position the charging coil.
Tonight I am going to take a look at temperatures during charging. With the screen turned on the battery did get 3-4°C warmer than normal on the Nokia Qi charger, but it was a pretty short charge. I am going to try leaving the screen turned on and the phone charging on the CarPad tonight for a couple of hours to see the charge rate and temperature change.
Other news:
There does not seem to be any scuffing, scratching, or denting of the phone's finish caused by inserting and removing from the clip. I had worried that the spring arms on the side might hurt the matte finish on the back of the phone, but so far I don't see any changes.
Thanks guys,
Ben
thanks for the update, keep us posted. in car qi charging is very interesting.
Sent from my HTC6435LVW using Tapatalk 2
Thanks, I got a reply from Moon that he thinks the "autopad" will be the option for the DNA and he'll let me know when it is available. I will post info here if I hear back.
http://owlpad.net/owl-autopad/
Update 3:
Good news tonight. First, I've done a temperature test using the phone at room temperature. With navigation, LTE, and the screen constantly on the CarPad provides moderage charge (+200mAh) and does not cause excessively high heat (under 45°C). This is comparable with the 43°C I saw with the Nokia Qi charger while watching a Netflix Stream.
With the screen off the temperature is also pretty normal (35°C) so I think the coil is good.
Moon at Owl Chargers tells me that he may add a little to the coil to make it more consistent on the charging, and he is going to create a new PCB that has the coil positioned 1/2" higher so that it will line up properly with the DNA.
It sounds like this change could happen pretty quickly, but I will let you know when I have the test board in hand.
Thanks guys,
Ben
Please keep the updates coming, thanks!
Hey everyone, sorry for a few days of delay.
I talked to Moon this morning and he thinks they should have the test board created by the beginning of next week. He is moving the charging coil up to line up better with both the DNA and the Galaxy S3, and he is upgrading to a bigger charging coil to presumably give better charging efficiency.
I have removed the standard charging coil from the phone holding base and have been using it as a standard desktop charger for the last few days (with the Owl-Pad supplied AC Adapter). It has been working well for that as long as I position the phone properly, so with any luck the new board should fix the problem in the car mount.
I will let you guys know when the new part ships, and will be sure to take pictures of the new versus old board.
Thanks,
Ben
Thanks for the updates.
Sudo make me a sandwich.
Good news from Moon at OWL Pad today, the new circuit board is complete, his testing looks good, and he is shipping it out to me to test on the DNA tomorrow.
I will update everyone here with pictures once I have the new board and have been able to try it out, but Moon posted some initial tests on the Galaxy S3 and Note 2 which both charge at the higher position. Those tests looked good so I have to think it will work on the DNA as well.
Thanks all,
Ben
(You can see my pictures and charging screenshots on the OwlPad site)
http://owlpad.net/2013/02/24/owl-carpad-for-htc-droid-dn/
AWESOME! thanks again. for the final product, he will make a new charger right? we wont have to buy the old one and replace the circuit board i hope.
thanks again.
bigjew92 said:
AWESOME! thanks again. for the final product, he will make a new charger right? we wont have to buy the old one and replace the circuit board i hope.
thanks again.
Click to expand...
Click to collapse
I'm not sure how he would do that. I'm sure he has a bunch of the units already boxed up from the last production run. It might be that he has to ship the old unit and the new board separate. Honestly, changing the board was incredibly easy. There are four screws and then the old board just lifts out and the new one drops in.
When the new one comes in I had planned on putting up pictures showing how to remove the old one and install the new one.
bmyton said:
I'm not sure how he would do that. I'm sure he has a bunch of the units already boxed up from the last production run. It might be that he has to ship the old unit and the new board separate. Honestly, changing the board was incredibly easy. There are four screws and then the old board just lifts out and the new one drops in.
When the new one comes in I had planned on putting up pictures showing how to remove the old one and install the new one.
Click to expand...
Click to collapse
I think I'd love to get both boards since then I'd be prepared if my next phone requires the "other" position.
breeze94 said:
I think I'd love to get both boards since then I'd be prepared if my next phone requires the "other" position.
Click to expand...
Click to collapse
f
Looks like the set is for sale for the DNA on the web page now. Still sounds like he's waiting for test results but you go through with an order now if you want.
Hey Guys,
I got the unit in the mail when I got home from work (30 minutes ago).
So far everything looks GREAT!
I am running temperature and charging tests now, but the new coil position looks perfect, and I'm getting as much or possibly more current out of the OWL charger than I was getting out of the Nokia.
Tonight I should have pictures and screen shots available from my early tests, but I have to say that everything looks great so far.
I also want to add that the level of customer service and responsiveness from Moon at OWL charging was incredible. If I got service half as good from the companies I do business with in the US I would be amazed, and these folks are having to deal with me from the other side of the world. I have absolutely no ties with their company, and hadn't even spoken to them to ask if the charger worked for my phone before I ordered, but they went above and beyond any expectations in getting this charger working.
Once I have a few hours charging I can fill in the remaining details (temperatures, approximate charge time, etc), but right now I would say the newest version is a huge success!
-Ben
bmyton said:
So far everything looks GREAT!
Click to expand...
Click to collapse
I forgot to mention, the +300 mah charging rate was with the screen locked on, LTE, GPS, Navigation, and Pandora all running.
Ben
bmyton said:
Hey Guys,
I got the unit in the mail when I got home from work (30 minutes ago).
So far everything looks GREAT!
I am running temperature and charging tests now, but the new coil position looks perfect, and I'm getting as much or possibly more current out of the OWL charger than I was getting out of the Nokia.
Tonight I should have pictures and screen shots available from my early tests, but I have to say that everything looks great so far.
I also want to add that the level of customer service and responsiveness from Moon at OWL charging was incredible. If I got service half as good from the companies I do business with in the US I would be amazed, and these folks are having to deal with me from the other side of the world. I have absolutely no ties with their company, and hadn't even spoken to them to ask if the charger worked for my phone before I ordered, but they went above and beyond any expectations in getting this charger working.
Once I have a few hours charging I can fill in the remaining details (temperatures, approximate charge time, etc), but right now I would say the newest version is a huge success!
-Ben
Click to expand...
Click to collapse
awesome! thanks for the feedback and being a Guinea pig for us all... i really appreciate it. so to make sure, you are now using the carpad/N2 right? if so, i'm gunna go ahead and place my order.
Thanks again
bmyton said:
I forgot to mention, the +300 mah charging rate was with the screen locked on, LTE, GPS, Navigation, and Pandora all running.
Ben
Click to expand...
Click to collapse
Thanks! Placed my order. I'm willing to give it a shot at this point!
So unexplainably my g5 started showing me this. Also plugging into charger does nothing. Don't know if factory reset would fix or if this is a hardware issue. I've been looking online but none of the genuine replacements confirm fitting this variant. Anyone have some insight to these matters?
Also that screenshot is without being plugged in. That message doesn't disappear.
That's very odd. If it doesn't actually harm anything I would just let it be. A new bottom chin is gonna cost you, but it's worth is up to you.
Btw, what font/theme are you running? It looks gorgeous
goast said:
So unexplainably my g5 started showing me this. Also plugging into charger does nothing. Don't know if factory reset would fix or if this is a hardware issue. I've been looking online but none of the genuine replacements confirm fitting this variant. Anyone have some insight to these matters?
Also that screenshot is without being plugged in. That message doesn't disappear.
Click to expand...
Click to collapse
Mine did this and it drove me crazy it would act as if I was plugging and unplugging constantly..
I disassembled it cleaned it all kinds of stuff....
It seemed like the hotter the device got the worse it was
I had this exact same issue on my H850 sometime back, did you by any chance get the phone wet? Changing the bottom chin had no effect in my case, it had to be sent in for repairs and when i got it back the entire phone except the screen was replaced. If you have warranty I suggest you send the phone in and they'll likely replace all required parts.
Did some digging and it turns out that the charging port of charger and phone get dirty and when they do u have to clean them. I used rubbing alcohol. Dipped unplugged charger male end. And disconnected the bottom chin. They *ucked for like 2 minutes. Blew it out with a can of air and boom problem solved
goast said:
Did some digging and it turns out that the charging port of charger and phone get dirty and when they do u have to clean them. I used rubbing alcohol. Dipped unplugged charger male end. And disconnected the bottom chin. They *ucked for like 2 minutes. Blew it out with a can of air and boom problem solved
Click to expand...
Click to collapse
Yea I did mine and it never solved it mine was full of crap I did get fast charge to work after cleaning but issue still persisted