Hello everyone!
I have a tablet which I use as media center, since my smartTV (Sony) "smart" funcionality sucks. It's a Energy System tablet with a dual core RK3066 CPU at 1.6 GHz, 1 GB ram and Mali-400 gpu.
The problem is...I have android 4.2 installed and I would like to install Cyanogen mode since the official rom sucks. I found a 4.2.2 and a 4.4 roms which works great with my tablet BUT...I have no touchscreen.
Since I have the official rom (as update.img, which I've extracted), is there any way I can add the touchscreen drivers to the new rom ?
I can access the new rom with a mouse, so the touchscreen wouldn't be a big issue to get USB debugging or even root the tablet.
Thank you everyone.
Wow....this is a lot of help, OMG, I can't even read all this pages here :crying: (pun intended )
Related
hi all,
im new to android and i successfully rooted the tablet (if anyone is having trouble rooting T10, im more then happy to help), and now id like to put a custom rom on it of course , but the problem is there arent any that are specifically for Alcatet T10. Id like to try cyanogen or AOKP, but they all focus on specific devices and since there arent any for T10 i dont know which one to chose. More specifically id like to know where does T10 fits in similarity or what not with the other models (tablet, phones) and if there are any that are similar can i use that ROM to install on T10. I just need to know if something bad can happen if I use ROM which is not specifically for T10, and if something goes wrong can I return to stock ROM?
any help is very appriciated, tnx in advance
tablet specs are:
Operating System : Android 4.0.3 Ice Cream Sandwich
Application Processor : Rockchip RK2918
CPU : 1GHz Cortex A8
System Memory : 1 GB DDR3
Storage Capacity : 4 GB NAND Flash
Wi-Fi : 802.11 b/g/n
Audio & Video Play : Built-in audio chip, 1080P HD playback
External Interface : Micro USB, Micro SD
Battery : 3000 mAh, 3.7V Lithium
Camera : Front camera 0.3Mpixel
wiki,cyanogenmod,org/w/P1c_Info --- remove coma and put dots
Samsung Galaxy Tab (CDMA) official cynogenmod ROM
what do you think about this one? its the most similar, has the same CPU, and T10 has 512Mb more RAM
a simple yes/no/maybe would suffice
Rooting T10
Hi,
I am at my wit's end. Trying to root the Alcatel T10. Each time I put it in debut mode and plug it in the USB, my pc just gives the "beep-beep-beep" of device not connected. On my device manager screen, the device shows as Other devices | one, and any attempt to install and/or update drivers just end in miserable failure.
In the past I have successfully rooted my Samsung Galaxy Gio, and Pocket, and unbricked my son's phone after he tried the same, so I'm not completely clueless in this regard. I just cannot get my T10 to connect to my PC in debug mode...
Any and all help will really be appreciated.
Since you say you have successfully rooted yours, maybe you can just point me in the right direction.
Thanks!
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
anybody?!
ROM majestic TAB 192
salutgabi said:
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
Click to expand...
Click to collapse
you can search for any " M901 " 4.0.4 ROM as " allwinner " or any other china product but....
you have to be sure that the ROM is made for 9 inches tablet
i will attach you a ROM that worked with me perfectly right on the same " majestic TAB192 "
stable ICS 4.0.4 ROM working perfectly fine
sorry to not respond before but i just saw the post
4shared.com
/file/ecDfkpI8/L090-1.
html?
sorry i am new i cant post full link
you have to collect it
thanks brother but you didnt wrote the method to flash the firmware into majestic tab 192
Thank you very much for your help. The problem was solved thanks to you. @shakeelajmal : You need to flash it with LiveSuit. it's easy
My friend give me this tablet to install the Play store. I don't have much experience with tablets and android in general, but I like to experiment so I flashed the tablet with the firmware posted by Future-Gate. Everything went ok, except the wifi that cannot be turned on (the switch stay "on" for a few seconds and then return to "off").
I usually search for info by myself (I revived an almost dead Galaxy S3 some months ago) but at the moment I'm panicked because the tablet is not mine and cannot find much informations.
On another thread I read that it could be a recovery problem (?) or a kernel problem. Somebody could point me on how to check/fix/workaround those problems?
Thank you.
Somebody with this tablet could please make a rom dump? I flashed it without backing up
thank you for the rom. it works well, except for the wifi. might have something to do with the drivers perhaps? i'm not very good with android.
I tried a lot of custom roms and they either worked fine and the wifi wasnt working, or the wifi was working but a lot of other things didn't work. Yours seems to be the best and smoothest, but the broken wifi makes makes the tablet useless. Please help
pls can you help me with the link to get your tab working again, I have an audiola that needs recovery
Dear XDA Masters
Greetings
I have this tablet
Allwinner A-10 quad core processor with 1 GB DDR3 on board dedicated RAM.Comes with Android 4.0.3 ICS OS.It has got a 7 inch Retina IPS (Instant Plane Switching) with 5 point multi touch capacitive display
it got a SuperHD 7 inch Retina A quad core Maili 400 GPU.In built 3G module with single sim slot. 8 gb nand flash. 1024*600 resolution.
After trying with more than 30 Roms for jelly bean, now I flashed with a Rom which was made for 9.7 inch device. I have bellow problems
a. can not see the buttom of display, as well as home, back keys. I tried by lowering LCD value to 130 from build prop but no luck.
b. I can see only 4 gb of my 8 gb internal storage.
c. touch inverted(got solution in another thread)
my USB debugging on so I can modify this Rom even before flash. but I don't have the stock Rom.please kindly help. thanks a lot in advance.
in picture first one is my current display, second one is like it should be.
Nobody????
Anybody. ......... nobody?????????
st_rock said:
Anybody. ......... nobody?????????
Click to expand...
Click to collapse
OK.. Firstly lets figure out what kind of tab you actually have, the A10 is a single Core SOC not quad core
so if it is truly a quad core it is most likely an A31 if it is Allwinner. Before Flashing Roms it would be best
to determine what SOC is in use first so once you have confirmed that we can work from there.
Thanks
Thanks for your kind reply. first when I connect to USB it says A10. but my reseller said a13. livesuit said invalid id for Roms made for a13. only this Rom (for A10) from modecom got flushed successfully. ww---w.modecom.eu/freetab_97011/tablety2/product/
then I used USB mouse, install cpv identifier, got a10. here is the uberizer snap for you too. again, as far I know, a10 doesn't have HDMI and Bluetooth, but in my device, there is HDMI port, though I didn't test. thanks again for your time..... I am so worried......
Q&A for RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Alcatel T10 Upgrade
tinko975 said:
finally, i did my alcatel t10 working right..
flashed it with Oma_Odys_Loox_JB_CM10_4.1.2_v1.2, used Oma_CM10_intSD_to_NAND_OTG_fix and Oma_CM10_v1.2_Format_NAND with JK-CM10-Pascal2-oc1104_20121203 kernel. no bugs, no rotations and cpu oc 1.1 ghz..
tnx, but we want cm11..
Click to expand...
Click to collapse
Hi!
I saw your post regarding your alcatel t10 being upgraded to jellybean..
can you please guide me on how to do it and what are the items that i need to install..
Thanks!
i forgot it, sorry.. now is stock rom on that device..
Hi Oma,
Can you please help me determine what are the things that I need to download in order for me to upgrade my Alcatel T10.
I've been reading threads about upgrading its firmware to Jellybean but it came to a point that I got confused and really don't know what are the stuffs that I need in order to upgrade my tab to jellybean.
I am new to this kind of stuff and I will appreciate if you can also provide me the step by step guide on how to upgrade may to tab to jellybean..
Thanks in advance!
If you never did this there are very big possibility that will btick device.. I tried several roms but return to stock debloated and rooted.
Problems with generic RK2918 ICS tablet
Hi all!!
I'm new to this forum (and pretty much to Android scene in general), so please, be lenient with me in case I unadvertedly infringe any forum norm. The matter is, I've been looking for some info about a generic RK2918 tablet I bought about 2 years ago, to no avail. As of late, the device is acting strangely (random reboots and/or stuttering running apps that it managed effortlessly a couple months ago...). I'd like to know how to flash it, as well as which rom I should install in order to make my tablet reach its maximum potential. I've heard great things about Oma's CM 10.1 AOSP roms, but I don't know which one would suit my device best.
My device's specs go as follows:
The tablet is a IMD "|97D", a 9.7" inch, 4:3 aspect ratio screen running under Android ICS 4.03
RK 2918 CPU at 1.2 GHz
1 GB DDR3 memory
16 GB NandFlash
max 32GB microSD support
WIFI 802.11 b/g/n support
G-Sensor
dual micro USB, one of them OTG
10 point capacitive screen with IPS 1024 * 768 resolution
2MP front and back cameras
The device is currenly running under its default firmware (i.e. no root access). Any help and/or piece of advice on how to proceed would be extremely welcome. Thanks in advance!!
Sir Oma,
I flashed this rom to my Alcatel One Touch T10, CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 with stock kernel 308 Alcatel T10 and
applied CrewRKTablets_AOSP_4.2.2_Format_NAND_fix. It is pretty stable however the battery status monitoring is not working. I have also
tried the other kernels said to be compatible with T10 notably the Pascal2 kernels. They seemed to work Ok but the screen display was
off-center, display was leaning to the right side of the screen. Same result when using the other stock kernel 308 Alcatel T10_2.
My only concern is the battery status monitoring, it remains stationary all through the whole hours of tablet use. Charging detection
is also not working. The rom however can detect the current battery status only when rebooting. I did try to apply the akku fixes for
JB and CM10, (though not intended for the AOSP rom) none worked. It ended up in bootloops.
Can you suggest a battery fix intended for CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 rom? Of all the JB 4.2.2 offering found
at CrewRKTablets site, this rom proved to be useful and stable to my Alcatel One Touch T10 tablet. There are some minor function
issues like display resize "fit to standard screen" option, it does not work. Camera image is upside down. But I guess to a standard
user (like me) these function should not pose a serious problem as installing and running apps intended for JB 4.2.2 works smoothly.
Thank You and More Power!
@ tinko75, tried the BQ-pascal kernels too but to no good.
Hello,
I´ve got the neo X7 and because my sis and i want to use it and i have heard that you can choose between two accounts at this ROM i want to installt it.
I have the s4mini with CyanogenMod 12 but about that i´m clear but with the Neo X7 i have no Idea how that works... so can anyone explain me how to install it (maybe a step for step Instruction)
The Tablet is in a originally condition (there is no CWM or anything else. So i need all...
Thanks in advance
and I´m sry for my bad Englisch but i´m from Germany and just at school.
greetings by Kainze
Arnova 10b g3
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
---------- Post added at 11:38 AM ---------- Previous post was at 11:13 AM ----------
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
i've also some issues with the TouchScreen... it seems to be not well calibrated, i've to touch the screen just under the spot i want to...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
Bricked Pmp5097
After flashing my PMP5097 cm10 I got bricked device. At startup tablet defined as "unknow device", but the screen is black
Help, please
Sorry for my english
Well, First, the Motorola XT300 was my first android phone, and I loved use it because it was small, and have a backtrack (like a mouse for the phone).
There are the specifications (You can see it on GSM Arena)
OS: Android 2.1 (Eclair)
Chipset: Qualcomm MSM7225 Snapdragon S1
CPU: 528 MHz ARM 11
GPU: Adreno 200 (Not activated) (Need drivers)
Well, first of all, It suppousedly had an Adreno 200, but the phone not come with the installed driver and use Software acceleration which makes the phone to be slow in everything. Someone can help with It and say if it have an Adreno 200? and If the phone have it, someone can activate it or tell me how? I want to use it back but the phone is too slow including in the launcher and apps like messages or calls.
If someone activate the GPU, I don't know if someone is interested to make a recovery CWM, or a custom rom (android 2.3 , 4 or 4.4.2) for this phone. It have like 8 years more or less... But first of all I want to make the GPU works xD Thanks to everyone