i have a lenovo p780 4gb indian version with s228
At times lock screen touch does not work it gets struck up and after sometime touch works as normal it happens for daily 10 times
other wise i should press the restart button at the back then it works normally
chandurao said:
i have a lenovo p780 4gb indian version with s228
At times lock screen touch does not work it gets struck up and after sometime touch works as normal it happens for daily 10 times
other wise i should press the restart button at the back then it works normally
Click to expand...
Click to collapse
Try this:
Do a full backup of your firmware with Titanium Backup. After backup try to uninstall all your software and see if it happent again.
If it does try to reflash your ROM.
Sent from my Lenovo P780
Do a full backup of your firmware with Titanium Backup. After backup try to uninstall all your software and see if it happent again.
If it does try to reflash your ROM.
all the software in the sense all the apps i nstalled by me.
Related
Hi All.
I need little help with my Android phone (LG P970). The story is the phone is working as much as I can call and text but the system is not stable. It's freezing a lot and then it's trying to reboot but after every rebooting my phone freeze on LG logo... the only way to run it again is taking out the battery and then system is starting ok but it's loading with all settings and data from few days ago... I have try to flash it with Smartflash tool... whole process whas without any error then phone rebooted automaticly and I find out that after rebooting my p970 sterted with the same old and notstable rom with all the call list and messeges from few days ago.. then I tryed to do the emergency recovery of my phone with LG software. Application asked me to type the model and S/N of my phone so I did that and again the whole process of recovery was ok (with no errors)... Then the phone rebooted on the end which is normal and again started with no effect of recovery.. it was the same ZEUS 7 rom, not stable and with all the data and settings from few days ago... I decided to use Titanium Backup to uninstall all the apps and I was trying to instal ROM MANAGER and run the recovery mode but in the middle of my work the phone freez again and then rebooted and then again freeze on LG logo... I took out the battery and again turned it on and when the system was loaded I find out that all the programs which I have deleted with TITANIUM BACKUP was restored somehow... EVERY time I try to restart in normal mode, reboot in recovery mode or even after flashing system is restarting automaticaly, it freeze on LG logo and the only way to run it again is to take out this battery... then system restoring all data and settings for some reason... can you help me with that?? maybe some of you know whot software i should use to do the FULL WIPE and get rid of the old borken system?? and by the way I'm realy sorry but my language is not perfect Thanks in advance for help
Same like me!
Hi, i have same problem with my P970 too, Could you fix your problem ?? Do you have any idea for fixing ??
Exactly the same for me with alcatel OT995 and modified rom. Exactly the same behavior.
Hello,
I just purchase an XYZ X1 through dealextreme. MT6589 quad-core.
One of the slots in the dual-sim not working, so I decided to try to fix it myself and install another ROM from SHUAME page app
I install MyUI ROM, but this comes with chinese KingUser instead of SuperUser, from that moment the phone cant recognize sdcard
When i try to start the phone pressing vol - to enter in recovery, this start in "FACTORY MODE" (all menus in chinese, y try to find any opyion for flashing but nothing) ... I do not know you play and do not understand Chinese, but from that moment the phone started to show colors and sounds, you remove the battery quickly.
I can not launch applications like Whatsapp, it does not recognize SD memory card.
The phone has limited functionality and only one SIM works. Only phone calls
I´m try every app for repair recovery, And now can launch CWM fromunclemobile, but sdcard is not recognize and cant flash.
Now, factory mode recovery still, and fastboot is not present.
If any could give me the original ROM or any way to fix the problem I would be very grateful.
Thanks in advance
yseku said:
Hello,
I just purchase an XYZ X1 through dealextreme. MT6589 quad-core.
One of the slots in the dual-sim not working, so I decided to try to fix it myself and install another ROM from SHUAME page app
I install MyUI ROM, but this comes with chinese KingUser instead of SuperUser, from that moment the phone cant recognize sdcard
When i try to start the phone pressing vol - to enter in recovery, this start in "FACTORY MODE" (all menus in chinese, y try to find any opyion for flashing but nothing) ... I do not know you play and do not understand Chinese, but from that moment the phone started to show colors and sounds, you remove the battery quickly.
I can not launch applications like Whatsapp, it does not recognize SD memory card.
The phone has limited functionality and only one SIM works. Only phone calls
I´m try every app for repair recovery, And now can launch CWM fromunclemobile, but sdcard is not recognize and cant flash.
Now, factory mode recovery still, and fastboot is not present.
If any could give me the original ROM or any way to fix the problem I would be very grateful.
Thanks in advance
Click to expand...
Click to collapse
do you still need the ROM?
tecno d9 mtk6582
ranillo said:
do you still need the ROM?
Click to expand...
Click to collapse
please help me with original stock ROM for my tecno d9....I flashed an incompatible custom ROM, it didn't work, the I restored my backedup ROM. after that sim management not working , invalid imei, radio off, sim not ready....any help?
iamsirwalid said:
please help me with original stock ROM for my tecno d9....I flashed an incompatible custom ROM, it didn't work, the I restored my backedup ROM. after that sim management not working , invalid imei, radio off, sim not ready....any help?
Click to expand...
Click to collapse
the stock rom is for xyz x1, not for tecno d9.
Hi friends,
I have brought HTC One XL+ from Kolkata about 6 months back. Loded some applications and games.....few months back.
Yesterday suddenly around 2 pm, my HTC started rebooting automatically.
It boots till lock screen. loading application like Next 3D Launcher, Gravity screen (paused), then screen goes black and reboots....
one more thing the touch screen does not works.... while volume and power button works....
It might not be software problem as last app loaded around 15 days ago, and not updated any application till then... it was working fine untill yesterday afternoon......
I have tried to go to recovery TWRP, it open TWRP but touch screen does not work....power switch locks the TRWP mode.
This problem happes few months ago, but it automatically get fixed ...
Factory Reset take us to TWRP recovery mode....
I m confused what could be the problem....?
.
Any suggestions what should be done....
Arup
Finally installed the adb driver in pc and booted the HTC ONEX XL+ in TWRP/recovery mode, pulled the sdcard contents ... as backup to pc.
Since touch screen is not working, I want to restore a system backup done earlier using TWRP.
Is it possible for me to restore backup using TWRP and adb shell.?
successfully boot up in safe moode... except the touch screen is not working, not rebooting on its own...
Any suggestions ?
.
SOlved..
arup3880 said:
successfully boot up in safe moode... except the touch screen is not working, not rebooting on its own...
Any suggestions ?
.
Click to expand...
Click to collapse
Finally got my HTC OXE XL+ working again....
Problem was related to Hardware.. might be Touchscreen connectivity was loose or ... some thing else...
Since initially phone was rebooting and touchscreen was not working.. I booted it into safe mode... which was ok except the touchscreen. It was not a software problem but hardware problem..
I completely disassembled the phone. removed every connector. remove the battery and kept it for 10 mins.
There after reassembled and it is working again.....
Thanks ...
Hello folks!!
So my dad has an Lenovo P780 with the SLX rom version 22. My dad likes the swiftkey keyboard so i got it for him. After a few days my dad experienced that the phone automatically resets it to google keyboard.
Now my Brother was so smart to disable the Google keyboard. Now the phone wil still boot but immidiatly give all kind of errors like 'system ui stopped' so the phone is likely broken. Cant even scroll before the next error.
I tried to go into recovery but the phone is stuck at the google logo. (Slx is a Nexus ROM).
What can i do? I am familiar with flashtools and fastboot but doesnt know how that works with the p780 because i have a oneplus one.
Thnx in advance!
Sent from my A0001 using XDA Free mobile app
Danhoff1 said:
Hello folks!!
So my dad has an Lenovo P780 with the SLX rom version 22. My dad likes the swiftkey keyboard so i got it for him. After a few days my dad experienced that the phone automatically resets it to google keyboard.
Now my Brother was so smart to disable the Google keyboard. Now the phone wil still boot but immidiatly give all kind of errors like 'system ui stopped' so the phone is likely broken. Cant even scroll before the next error.
I tried to go into recovery but the phone is stuck at the google logo. (Slx is a Nexus ROM).
What can i do? I am familiar with flashtools and fastboot but doesnt know how that works with the p780 because i have a oneplus one.
Thnx in advance!
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Hi. This is interesting!
Try this:go to settings, apps, press menu button(the one from the left), then Reset app preferences.
Iff this dont work try to do a backup and reset- Factory data reset.
Good Luck
Thnx. Wasnt able to touch the screen at all but now i flashed a kitkat ROM through flashtool. No having connectivity problems. Check my other topic..
Sent from my A0001 using XDA Free mobile app
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Did you manage to find a stock 4.4.2. ROM?
I'd need it as well cause my M7 came with 4.2.2 and i'd like to update it while I did not find any OTA update to the 4.4.2 release so far (don't know if OTA even works cause it says error connecting to the network even though it also says the system is uptodate).
Should you still need the stock 4.4 ROM, there are a couple of members in this thread http://forum.xda-developers.com/showthread.php?t=3089024 who got sent a 4.4 m7 firmware, you could try it out with a backup from them.
M7 flashing
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Hi,
I got X01 today...I would like to flash it ...but how to do it? How to switch the watch into flash mode? There is no volume buton as on ordinary mobile. And how to put the watch in recovery mode? Which button or how to switch the watch.
Thank you very much in advance for assistance..
Regards
Filik
I have a backup of stock room if neededfirst thing I did was take a nand backup