Related
I've been trying to configure a xt912 on at&t for voice use, but can't seem to get the phone to accept the sim card, I keep getting the same error. I can access apn settings, and see at&t settings there, making me think that the sim card must be installed correctly. I've run radiocomm, and fixed the values associated with unlocking the gsm. Yet, I can't seem to get a signal or get past the unknown sim error.
I'm running the vzw 6.16.211 rom as restored with razr utility 1.8. Any help would be greatly appreciated.
Ebonyks said:
I've been trying to configure a xt912 on at&t for voice use, but can't seem to get the phone to accept the sim card, I keep getting the same error. I can access apn settings, and see at&t settings there, making me think that the sim card must be installed correctly. I've run radiocomm, and fixed the values associated with unlocking the gsm. Yet, I can't seem to get a signal or get past the unknown sim error.
I'm running the vzw 6.16.211 rom as restored with razr utility 1.8. Any help would be greatly appreciated.
Click to expand...
Click to collapse
same with me after installing razr hd rom on my GSM
Here is a link that has similar problems.They say make sure you have an active att service. Change settings and it may take some time for it to switch over.
http://forum.xda-developers.com/showthread.php?t=1297714&page=6
Although this is from a different phone it may help in the process.
1. Do a standard factory wipe on your device
2. Pull battery and replace after the device boots
3. Connect via USB to computer and enable USB MASS STORAGE, allowing drivers to install
4. Google and DL bionicbootstrap.apk and copy to the root of your micro sd card
5. have RSDLITE (latest version) installed on your machine
6. Google an DL VRZ_XT875_5.9.904.XT875.Verizon.en.US_CFC_01
7. Disconnect phone and power it off
8. Holding both volume up/down, press power button and scroll to select apfastboot
9. Connect device to computer
10. Open RSD lite and flash VRZ_XT875_5.9.904.XT875.Verizon.en.US_CFC_01
11. Let the Bionic do its thing and reboot
**You should now be on a stock Verizon ROM and the welcome screen**
12. Connect device using PC ONLY MODE
13. Google and download motofail_windows.zip, unzip, and run the bat file (making sure your device is in debug mode as well)
14. Let the device root
15. Enable installation of apps from unknown sources
16. Power down phone and reboot into CW Recovery
17. Clear data/factory reset
18. Clear cache
19. Clear dalvik cache
20. Install bionicbootstrap.apk
21. Reboot device
**You should now be on a stock ROM/rooted, with the Bionic Bootstrap app loaded in your app drawer**
22. Connect the Bionic using PC ONLY MODE
23. Google and DL radiocomm (latest version) I believe I used 11.2.1 but can verify later
24. Let radiocomm install and also install needed drivers
25. Follow these instructions to enable the GSM radio:
In Radiocomm go to MA->CDMA1X->QSC60x5
After it comes up, switch to FTM Common1 tab and wait for the phone to enumerate purple.
On the upper right side in the NVAccess, scroll to NV item 1877 NV_RF_BC_CONFIG_I
Read the value from the device
Replace the first 8 bytes (16 digits) with: 8703E80400000200
Write the data to the device and powercycle.
This will enable GSM/UMTS bands.
26. Reboot the phone
27. At the "Touch Droid to Begin Screen", touch the 4 corners from the upper left going clockwise
28. the device should now go into the "sync" screen - "communicating with server"
29. Let it time out/fail - whatever - doesn't matter
30. You should now be at the Bionic's wallpaper and able to set up accounts, GPS, etc.
31. Don't change any of the network settings - It will do this automatically
In no way did i write this. I stumbled onto this here http://forum.xda-developers.com/showthread.php?t=1794956 (many thanks AlpineMan btw) and have seen the question here in the Evo 3d section a few times and thought it was worth a share for those running a Sprint ROM and VM or Boost service. I did step one and it worked like a charm. And to me any fix is a good fix. Especially in the land of root phones.
Method 1 - (the real fix, but requires a rooted phone):
***UPDATE***
I've confirmed that this method works on Jellybean ( 4.2.2). Tested and working on VM Evo 3d
1a) Download this working Sprint APN xml file: https://www.box.com/s/40x5ac2c6u0ckzfz59ig (click on download button at the top)
OR
1b) For Boost, download this xml file: https://www.box.com/s/o9folfrq00ee9p2qj5pv (click on download button at the top)
OR
1c) For Virgin Mobile, download this xml file: https://www.box.com/s/9itl21drpp84enqeszc9 (click on download button at the top)
2) Download and install "APN Backup & Restore" from the Google Play Store to your phone: https://play.google.com/store/apps/d...pRestore&hl=en
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
Method 2 - (work around, doesn't require rooted phone)
1) Download and install Go SMS Pro to your phone from the Google Play Store.
2) Launch Go SMS Pro and skip through the intro message screens.
3) Skip the Go Chat Service offer unless you really want that.
4) Press Menu button on your GS3.
5) Choose Settings.
6) Scroll down the menu and choose Set default SMS program.
7) Press each entry in the list and put a check mark on "Use by default for this action" then choose Go SMS Pro. When both are done, press the back button on your phone.
8) Up on top, press "Advanced"
9) Scroll down the list and press "MMS Settings"
10) Scroll down the list and put a check mark on "Fill APN configuration manually"
11) Press "MMSC".
12a) Type in "http://mms.sprintpcs.com" - do not include the double quotes. Press OK button.
OR
12b) Type in "http://mm.myboostmobile.com" for Boost
OR
12c) Type in "http://mmsc.vmobl.com:8088/mms?" for Virgin Mobile
13) Press "MMS PROXY".
14) Type in "68.28.31.7" (Sprint & Boost) OR "205.239.233.136" (Virgin Mobile) - do not include the double quotes. Press OK button.
15) Press "MMS PORT".
16) Type in "80" (Sprint & Boost) OR "81" (Virgin Mobile) - do not include the double quotes. Press OK button.
17) Press back button on phone twice.
18) Send/receive a few SMS/MMS messages to test.
19) Done.
Works for Kit KAt (4.4) too
Hey,
Method 1 works for Kit Kat 4.4.1. I'm on a VM evo 3d with the CyanogenMod 11.0 VILLUMINATI Rom
The only difference is the app has to be moved to the /system/priv-app folder for it to be able to acquire the correct permissions.
I also did step 3) with titanium backup, not sure if it helped or not.
Cheers.
THIS DOES NOT UNLOCK YOUR PHONE!! ITS A HOTSPOT UNLOCK FOR THE SPRINT NOTE EDGE.. ITS MAY WORK FOR OTHER VARIANTS BUT I HAVENT TESTED ANYTHING BUT SPRINT PHONES.
Whats up ladies and gents. As we all know Sprint has release the lollipop version of android to our beloved Note Edge. And the question has been raised as to what we have and can do with lollipop. Xposed is still not yet available. So i put a list of things that can be done manually via Sqlite, Root Explorer etc. I am not a developer. I am merely a man who likes to tinker with my phone. XD
With that being said, if there is anyone who believe they can make a zip to make the process easier, by all means.. I still dont have the capabilities as of yet.
NON ROOT What's needed
1. Sprint Note Edge.
2. MSL Number. (Call Customer service and tell them you had issues activating...)
Spoiler
Step One: Go into the Dialer Pad and type ##3282
Step Two: Press Edit
Step Three: Enter your MSL, then press OK
Step Four: Press APN Settings
Step Five: Press APN2 EHRPD internet,
Scroll to APN Type and press
Enter ",dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Six: Press APN2 LTE internet,
Scroll to APN Type and press
Enter ",dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Seven: Reboot
Step Eight: Configure and Test.
Credits: idone: http://forum.xda-developers.com/showthread.php?t=2796994
ROOTED METHOD (With Terminal Emulator Type SU then type "getprop ril.MSL")
Whats needed:
SQlite Editor
Spoiler
Step One: Open SQLite
Step Two: Under FILES
A. Go to data/data/com.android.providers.telephony/databases
B. Open Telephony.db and go into carriers
C. add ",dun" to type in the APN2 LTE internet and APN2 EHRPD internet
D. SAVE and REBOOT. :highfive:
Mods
Here is how to add that Sexy hotspot toggle.. XD:
For this you will need SQLite editor.
1. Open Sqlite
2. Navigate to:
data/data/com.android.providers.settings.db/databases
3. Open system
4. Look for line 3396 and press to edit.
5. Add the following ";WiFiHotspot"
6. Save and Reboot. You're GOLDEN. XD
360 Fonts courtesy of @jimmydene84:
For this mod you will need the file attached and a file manager. I highly recommend root explorer.
1. Download this apk.. https://docs.google.com/file/d/0B6opNIGQWcVYUEIwemx6cjJsSjg/edit?usp=docslist_api
2. Paste the apk into system/app/ChocoEUKor folder.
3. Set permissions.
4. Open the Arm folder located in the same folder and rename the odex file... etc.. add .bak to it
5. Reboot and enjoy.
System wide emojis courtesy of @jimmydene84: For this mod you will once again need a file manager.
1. Download the file attached. https://docs.google.com/file/d/0B6opNIGQWcVYdWxOMUlCbzF5Tkk/edit?usp=docslist_api
2. Paste in system fonts.
3. Set permissions.
4. Reboot and enjoy.
z31k said:
Whats up ladies and gents. As we all know Sprint has release the lollipop version of android to our beloved Note Edge. And the question has been raised as to what we have and can do with lollipop. Xposed is still not yet available. So i put a list of things that can be done manually via Sqlite, Root Explorer etc. I am not a developer. I am merely a man who likes to tinker with my phone. XD
With that being said, if there is anyone who believe they can make a zip to make the process easier, by all means.. I still dont have the capabilities as of yet.
NON ROOT What's needed
1. Sprint Note Edge.
2. MSL Number. (Call Customer service and tell them you had issues activating...)
Step One: Go into the Dialer Pad and type ##3282
Step Two: Press Edit
Step Three: Enter your MSL, then press OK
Step Four: Press APN Settings
Step Five: Press APN2 EHRPD internet,
Scroll to APN Type and press
Enter "dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Six: Press APN2 LTE internet,
Scroll to APN Type and press
Enter "dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Seven: Reboot
Step Eight: Configure and Test.
Credits: idone: http://forum.xda-developers.com/showthread.php?t=2796994
ROOTED METHOD (With Terminal Emulator Type SU then type "getprop ril.MSL")
Whats needed:
SQlite Editor
Step One: Open SQLite
Step Two: Under FILES
A. Go to data/data/com.android.providers.telephony/databases
B. Open Telephony.db and go into carriers
C. add "dun" to type in the APN2 LTE internet and APN2 EHRPD internet
D. SAVE and REBOOT. :highfive:
Click to expand...
Click to collapse
Worked with no problems...
What does this do exactly?
primo523 said:
What does this do exactly?
Click to expand...
Click to collapse
It unlocks your hotspot.
I had a free min today. The hotspot toggle should look like this. Hit me up if you guys have anymore questions.. ill post more as i get some free time. XD
Nice..
z31k said:
Here is how to add that sexy hotspot toggle.. XD:
For this you will need SQLite editor.
1. Open Sqlite
2. Navigate to:
data/data/com.android.providers.settings.db/databases
3. Open system
4. Look for line 3396 and press to edit.
5. Add the following ";WiFiHotspot"
6. Save and Reboot. You're golden. XD
Click to expand...
Click to collapse
I dont have 3396
Sent from my SM-N915P using XDA Premium HD app
I apologize, i shouldve been more clear. Edit the line titled notification_panel_active_app_list. Looks like this...
Font mod + System wide emojis. Now up in the second post. XD
Thanks to jimmydene84!!
If you're not sure what the emojis look like. Im not a fan of the samsung emoji style. XD
Non-Rooted method
I followed the non-rooted method and lost data completely and "APN2 LTE internet," and "APN2 EHRPD internet," are no longer in the menu.
Xpertss said:
I followed the non-rooted method and lost data completely and "APN2 LTE internet," and "APN2 EHRPD internet," are no longer in the menu.
Click to expand...
Click to collapse
That's strange, i used this method on 15+ phones with no issues. Are you on the sprint variant? Are you on 5.0.1? If you still don't have data type ##72786# into the dialer pad and try again.
z31k said:
Whats up ladies and gents. As we all know Sprint has release the lollipop version of android to our beloved Note Edge. And the question has been raised as to what we have and can do with lollipop. Xposed is still not yet available. So i put a list of things that can be done manually via Sqlite, Root Explorer etc. I am not a developer. I am merely a man who likes to tinker with my phone. XD
With that being said, if there is anyone who believe they can make a zip to make the process easier, by all means.. I still dont have the capabilities as of yet.
NON ROOT What's needed
1. Sprint Note Edge.
2. MSL Number. (Call Customer service and tell them you had issues activating...)
Step One: Go into the Dialer Pad and type ##3282
Step Two: Press Edit
Step Three: Enter your MSL, then press OK
Step Four: Press APN Settings
Step Five: Press APN2 EHRPD internet,
Scroll to APN Type and press
Enter "dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Six: Press APN2 LTE internet,
Scroll to APN Type and press
Enter "dun" (without the quotations)
Hit Ok
Press the Menus Button and save.
Step Seven: Reboot
Step Eight: Configure and Test.
Credits: idone: http://forum.xda-developers.com/showthread.php?t=2796994
ROOTED METHOD (With Terminal Emulator Type SU then type "getprop ril.MSL")
Whats needed:
SQlite Editor
Step One: Open SQLite
Step Two: Under FILES
A. Go to data/data/com.android.providers.telephony/databases
B. Open Telephony.db and go into carriers
C. add "dun" to type in the APN2 LTE internet and APN2 EHRPD internet
D. SAVE and REBOOT. :highfive:
Click to expand...
Click to collapse
With this method of unlocking could I bring my Note Edge to Verizon? I've been told by both Verizon and Sprint reps that this cannot be done, but I am leery of them for obvious reasons and based on what I've read online....which is that it might be possible.
It is possible.. just not conventional. Both verizon and sprint are cdma based, however they are on different spectrum. So, while you can activate it. Something will be broken. etc. Mms, data, sms.. i would just sell the phone and get a Verizon variant. I hear they have a developer edition?? XD
Can u please help me unlock my note edge sprint on lollipop..i tried downgrading to kitkat but failed and shows error for sw version check failed.....please help me.
DhavalPanchal said:
Can u please help me unlock my note edge sprint on lollipop..i tried downgrading to kitkat but failed and shows error for sw version check failed.....please help me.
Click to expand...
Click to collapse
Sorry to hear that.. first thing is first. Odin the stock build of lollipop. Do you have the stock rom? If not here is the link:
http://www.sammobile.com/firmwares/download/45546/N915PVPU2BOC8_N915PSPT2BOC8_SPR/
After flashing lollipop what i have to do in order to downgrade it to kk
Awaiting for ur reply
Why don't you just Odin kk firmware?
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
-----
UPDATE:
It seems like OPPO caught onto this program. That MAC address is no longer accepted. However, there is a workaround (thanks to @Sonic Steven).
If you set the custom MAC on any adapters, remove it.
If you have the Secrecy program running, close it.
Disable any Ethernet/wired/virtual adapters, leaving only WiFi enabled. If you don't have a WiFi adapter, you may be able to leave Ethernet enabled, but it isn't guaranteed to work.
In Device Manager, click the root of the device tree (it should be your computer's name).
Open the "Action" menu and click "Add legacy hardware".
Click "Next" and select "Install the hardware that I manually select from a list (Advanced)".
Click "Next" again and select "Network adapters" in the list.
Click "Next" again. Once it loads, select "Microsoft" in the "Manufacturer" list.
In the "Model" list, select "Microsoft KM-TEST Loopback Adapter" (the name may be slightly different on other systems; select the one that has "Loopback Adapter" in the name).
Click "Next" twice to begin the installation.
Once the installation is complete, you should be able to reopen the Secrecy program and decrypt.
NOTE: The Secrecy program requires a working internet connection. It connects to OPPO's servers and performs some sort of authentication.
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
Click to expand...
Click to collapse
Thanks a lot (understatement) I will try follow your advice..
Does Unlocking the bootloader of Realme X3 SuperZoom, bricks the fingerprint sensor(Side-Mounted)???
Didn't passed step no. 13
I already tried but didn't passed step no. 13
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
Zacharee1 said:
In my process of unlocking the bootloader for my Realme X3 SuperZoom, I hit an error in the In-Depth Test app that told me I had a "carrier-customized" device and thus couldn't continue. I figured out how to get around this without needing root. All you need is a Windows computer, ADB, and a super shady program (I've tested it and there don't seem to be any viruses in it). Let's get started.
Bootloader unlock guide: https://forum.xda-developers.com/x3-superzoom/how-to/guide-unlock-bootloader-realme-x3-t4136325/.
WARNING: this won't wipe your personal data, but it does appear to clear WiFi passwords.
If you haven't already, enable Developer Options and USB Debugging.
Next, download the Oppo_Free_Unlock_v1.0.zip file from the attachments and extract it somewhere.
Before you run anything, though, there's a little preparation that needs to be done.
Open Device Manager and expand the Network Adapters category.
Find your Ethernet adapter and double click it to open its properties.
Go to the Advanced tab and find the Network Address option in the Property pane.
Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
If you don't have an Ethernet adapter, try to find another network adapter here that has the Network Address property. It may help to install VirtualBox, since it will add fake Ethernet adapters.
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. Choose the first one: "Multilingual Version Ex".
Your phone should now reboot. Once it's rebooted, your region will have changed and you should be able to use the In-Depth Test app to unlock your bootloader.
In theory, changing your region like this should work on any OPPO/Realme device running at least Android Pie (9). It may even work on earlier versions.
NOTE: This will not work for Chinese variants. These codes are filtered and will only work for international variants. However, the Chinese variants should be immediately unlockable.
Click to expand...
Click to collapse
I already tried but didn't passed step no. 13
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
---------- Post added at 12:46 PM ---------- Previous post was at 12:28 PM ----------
my device doesnt come up i have mtp on and its not working, if i click unlock my device pops up but nothing is in right lane. any ideas australian oppo find x2 pro
same Find X2 Pro sec5 dont show ok on the right side
hello
with oppo a9 2020;
does not work, I start the procedure with Sec5.exe it recognizes the device but does not give the ok; the same thing happens when you start secrecy.exe!
How can I solve?
@Zacharee1
I think this thread should be moved to https://forum.xda-developers.com/f/android-general.1424/, since it is not only for Realme X3 SuperZoom.
This solution is also applicable to RealmeC11(RMX2185).
credit to:
@Zacharee1
@HemanthJabalpuri
yeah i dont think this works anymore..
Sage said:
yeah i dont think this works anymore..
Click to expand...
Click to collapse
This works flawlessly in Realme C11.
HemanthJabalpuri said:
This works flawlessly in Realme C11.
Click to expand...
Click to collapse
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Sage said:
recently? i am hearing in other threads that it was a recent change that made it stop working? only a few days ago.
Click to expand...
Click to collapse
Yes, see above post. https://forum.xda-developers.com/t/...ow-bootloader-unlocking.4136341/post-84091819
Got it working. Have NO MAC address listed in the Loopback and have at least 1 other network device active with internet access!
i thought you were supposed to have no internet adapter.
Also working on Realme 7 Pro, quick question, I'm already rooted with custom recovery, am I allowed to change the region without removing root and custom recovery?
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Does not work on realme 7 RMX2155 : ( . In depth Test app Failed to submit application is displayed
works on a realme 7 pro, thanks.
dynux90 said:
Hello @Zacharee1
THANK YOU VERY MUCH!!
I was struggling to unlock the bootloader on a realme 5 with Android 10 and you SAVED MY ASS!!
Guide is working!!
Click to expand...
Click to collapse
how did you get it to work,,cause when i click on start unlocking my laptop screen just flashes,,but nothing happens on the sides of the secrecy autounlocker ,,a few trials here and there i was able to acquire a token from the software but when i input in my AuthTokenDecrypt it says signature doesn't match
Hye
Is This Still Working For realme 3 pro?
Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
I did some digging and this will work with the same rom on A52, A72 and A92.
Could I get a moderator to cross post this to the other device forums please?
Requirements:
OPPO A72/A52/A92 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks
@MuntedJester THREAD CLOSED as duplicate of
Android 11/ColorOS 11 OPPO A72 Update with VPN
Hi, I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary. This will activate dual sim mode on the...
forum.xda-developers.com
The thread has also been moved from the development section into this sub-forum.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Also review the sticked "Device Forum Rules (Read before posting)" with special focus on the conditions what threads qualify for the development section.