Related
NFC Compatible UPDATE at Bottom
This QI receiver pad works much better than the first one I tested. It's ability to work with the LG WCP-700 is a huge perk. The pad looks wider, it fits better, works with more pads, works through most cases with no issues etc.
Out of the two I've used so far, this one is better in every way... So far...
By request... This is the auction I purchased it from.
Buy it now link:
http://goo.gl/37o5jR
EDIT:
Added this video. It should cover the thickness, couple of cases, Google Orb charger, charge rates, and NFC usage.
EDIT (4/27/2014):
NFC Receiver UPDATE
Well I got really busy after I purchased a third receiver and didn't publish any information until now. Why did I purchase a third receiver? Well it was because of NFC. The second receiver is still the best with charging, but this one is a close second. I could not get NFC to work with the second receiver. This one will work through most cases.
eBay Link: I'm posting search results. Just match up the model with the one in the video. It's easier this way in case some of the auctions end.
http://goo.gl/crTI3R
Thanks for the video. Can you post the ebay link?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
chrisngrod said:
This QI receiver pad works much better than the first one I tested. It's ability to work with the LG WCP-700 is a huge perk. The pad looks wider, it fits better, works with more pads, works through most cases with no issues etc.
Out of the two I've used so far, this one is better in every way... So far...
Click to expand...
Click to collapse
Thanks for the video. I'm holding off till I see the video with the cases on. I'm too clumsy for this baby to go naked.
Also, have you experienced any issues with NFC using this one?
---------- Post added at 06:49 AM ---------- Previous post was at 06:47 AM ----------
mehdi_s82 said:
Thanks for the video. Can you post the ebay link?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He's got the link in the youtube about section.
babyshanks said:
Thanks for the video. I'm holding off till I see the video with the cases on. I'm too clumsy for this baby to go naked.
Also, have you experienced any issues with NFC using this one?
---------- Post added at 06:49 AM ---------- Previous post was at 06:47 AM ----------
He's got the link in the youtube about section.
Click to expand...
Click to collapse
I don't personally use NFC a lot, but yes there are big issues with the NFC. I'll do a follow up video showing it being used with two cases and attempting to beam to another phone.
Buy it now link:
http://goo.gl/37o5jR
chrisngrod said:
I don't personally use NFC a lot, but yes there are big issues with the NFC. I'll do a follow up video showing it being used with two cases and attempting to beam to another phone.
Buy it now link:
http://goo.gl/37o5jR
Click to expand...
Click to collapse
Does this add buldge to the original back cover? Or from outside it looks as before and stays flat on surface?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
So what charging pad do you use with the receiver module?
How long does it take to charge the battery when placed on the pad?
Thanks
The receiver is made by yijieneng.
Does this charging system fully charge a Note 3? Another thread mentioned wireless charging systems don't charge to 100%.
juchima said:
Does this charging system fully charge a Note 3? Another thread mentioned wireless charging systems don't charge to 100%.
Click to expand...
Click to collapse
which thread?
Kawaisa said:
which thread?
Click to expand...
Click to collapse
This thread > link
And please also let me clarify that the thread mentioned that some wireless charging systems are not able to charge certain devices to 100%. Sorry for not being clear.
juchima said:
Does this charging system fully charge a Note 3? Another thread mentioned wireless charging systems don't charge to 100%.
Click to expand...
Click to collapse
There is a difference between a power pack and a desktop charger.
kms108 said:
There is a difference between a power pack and a desktop charger.
Click to expand...
Click to collapse
OK, thanks for clarifying!
awesome video, I was looking at that receiver as well, have had good experience with that brand yipin or yieneng on m s4.
the biggest quest for me is does it bulge? the s4 there was a spot where the chips would fit in the notch for the microsd, but I dont see a notch on the note 3 so I wonder if they designed it to fit in some kind of recessed area?
Thanks in advance.
See the 3 pins where you connect the wireless receiver:
Top one is +5v.
Second one is Ground.
Thrid one is for S-View Cover (+) - (in case you wonder that the heck is that for)
In the event that you have a S-view Cover, you just have to use second as a common ground between the receiver and the S cover.
galaxy808 said:
awesome video, I was looking at that receiver as well, have had good experience with that brand yipin or yieneng on m s4.
the biggest quest for me is does it bulge? the s4 there was a spot where the chips would fit in the notch for the microsd, but I dont see a notch on the note 3 so I wonder if they designed it to fit in some kind of recessed area?
Thanks in advance.
Click to expand...
Click to collapse
This receiver is pretty thin in everyway, as with all receiver, you will get the bulge, but you will not really notice it, would you rather have a receiver that has no bulge that does not work well or a receiver that has a slight bulge and does what you expect.
Can you still fit a case on with this installed? I have a hard case sedio with a kick stand and do not want to give it up.
Added this video. It should cover the thickness, couple of cases, Google Orb charger, charge rates, and NFC usage.
vandals01 said:
See the 3 pins where you connect the wireless receiver:
Top one is +5v.
Second one is Ground.
Thrid one is for S-View Cover (+) - (in case you wonder that the heck is that for)
In the event that you have a S-view Cover, you just have to use second as a common ground between the receiver and the S cover.
Click to expand...
Click to collapse
Can you explaine your last item?
I got an s view cover and want the Qi receiver.
How to make them work togheter?
I also have an qi wireless back cover from samsung but i think it makes the phone to thick.
I use the original cover at home. And when im at sail the s view.
damitch300 said:
Can you explaine your last item?
I got an s view cover and want the Qi receiver.
How to make them work togheter?
I also have an qi wireless back cover from samsung but i think it makes the phone to thick.
I use the original cover at home. And when im at sail the s view.
Click to expand...
Click to collapse
you can enable s view functions as explained in my video https://www.youtube.com/watch?v=mqzDf-CDLT8 i bought the cheapest case and receiver and works fine.
am using the same in my car with my qi enabled car charger holder https://www.youtube.com/watch?v=ZTNAPp2UkkI
have a newer one with NFC pins but not had time to do a video, will try to do one later tonight, think it should be the thinnest till date and charges fine at home.
getting the official one in a few days too and will review it when i get it. ordered a second official one from clove uk. my original order for the official one made in early october from mobilefun hit the wall from the scamsters at mobilefun. was repeatedly getting emails saying delivery delayed and whether i will accept alternate product (please note no mention of refund in any email), then a week or so ago saw on their website that it was in stock but still didnt get delivery and got another email saying further delays and saw on website that it was sold out!!!. so sent them email to send it or give refund after cancelling order. they replied with email saying order cancelled and that was nearly 2 weeks ago and yet to get refund. so have raised a claim at paypal and those scumbags havent yet responded to paypal claim and 8 days now since i have escalated this to a claim at paypal and mobilefun havent yet bothered to reply to my paypal claim. if dont get my refund will escalate it to fraud complaint with my credit card issuer against mobilefun. paid via credit card via paypal to mobilefun website in early october. just mentioning this here so that other people dont get scammed like i have been at mobilefun.
kms108 said:
This receiver is pretty thin in everyway, as with all receiver, you will get the bulge, but you will not really notice it, would you rather have a receiver that has no bulge that does not work well or a receiver that has a slight bulge and does what you expect.
Click to expand...
Click to collapse
Thanks for your videos. I love wireless charging but on the note 3 it's been a bittersweet scenario...got the oem samsung charging back but there are no cases that fit that (at least that I've found) so I'm stuck choosing between a case and wireless at the moment. Your thread has given me some hope though about the possibility of using the original back with an insert that actually works and still be able to fit a case.
One question - does the phone with insert in & case on "rock" when it's on a flat surface? For example, when you have it flat on a desk/table/etc and you hit the home button on the note - does it "rock" toward you and then back after lifting your finger? This is so annoying to me and I wake the device with the home key a lot at work...it'd probably be a deal-breaker for me, but if you can share your insight I might avoid another bit of money wasted.
Thanks!
I ordered the Qi sticker from Ali Express and it has been working great. These are the same ones that others are selling on here and eBay. Here's the link if you want to get it yourself and save a few bucks.
http://www.aliexpress.com/item/Fact...G-G3-CASE-D885-D830-D851-D850/1971193812.html
What kind of charging rate are you seeing with this?
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Which chargers are you all using?
I have tried 4 so far and only the Nokia DT-900 works for me.
I tried an Incipio Ghost 100, PowerBot PB1020, and Anker Slim as well, but all kept reporting to put the phone in the hot zone and wouldnt charge it.
I've heard good things about TYLT, but can't see spending 50+ for a charger.
Thanks.
antgore06 said:
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Click to expand...
Click to collapse
Do you still have any of these left?
How long did it take you to get it?
About 2 weeks. Not bad coming from China.
antgore06 said:
i have 3 of the stickers let if any one was looking for on and did not wanna wait 3 weeks for it to come in
Click to expand...
Click to collapse
Any left bruh?
Yeah.
I like using a case on my phone. Does this card add any bulk? I purchased one for GS5 and wasn't happy with bulge it created.
I bought the sticker from ebay, installed but i really dont like how it work, i have to put the phone in the sweet spot to work ( probably could be the charger) but my nexus 5 charge from any angle.
2fastkuztoms said:
I bought the sticker from ebay, installed but i really dont like how it work, i have to put the phone in the sweet spot to work ( probably could be the charger) but my nexus 5 charge from any angle.
Click to expand...
Click to collapse
Use a different Qi charging pad. The LG G3 is picky when it comes to charging pads.
I'm using this Qi sticker: http://www.ebay.com/itm/201154470247?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Only a buck more than the 1 from China, and it gets to you a lot faster. It's working fine, and is no thicker than the stock NFC sticker (which you need to pull / scrape out of the back before you install this one) so it adds no bulk.
I'm using it with these charging pucks:
http://www.amazon.com/gp/product/B00F6SPZWO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B00ESUC36M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
They work fine. Positioning is a little bit sensitive, but it only took me a few tries to figure out the sweet spot.
I ordered 3 QI sticker and have 2 extras if any one wants one
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
If this is still a valid offer just lmk what you'd need from me. Thanks in advance for any consideration.
ASHinStL said:
If this is still a valid offer just lmk what you'd need from me. Thanks in advance for any consideration.
Click to expand...
Click to collapse
PM your info and I'll ship it out to you
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
Is this still on the table?
@ piperj All gone ASHinStL got the last one
Ordered this one off eBay and couldn't get it to work for anything, NFC is very weak compared to the stock cover. Asked for a replacement and installed it, same thing. Using this puck that I got with my S5 , maybe I'll try a known working pad, I got a feeling this one is very cheap.
rollinrich said:
I ordered 3 QI sticker and have 2 extras if any one wants one
Click to expand...
Click to collapse
do you still have an extra one?
Does anyone know if the old Google Wireless charger seen here http://www.amazon.com/Google-Wirele...4183&sr=8-3&keywords=nexus+6+wireless+charger will work with the Nexus 6?
Yes, it does. It doesn't "stick" as good as the N4 and N5 (I believe primarily because of the curved back), but it is usable.
You're much better off with a larger charging bed though, like the original Samsung charger. Or, better yet (especially if you're wanting a "stand-up" type of charger), the Nokia DT-910 works perfectly. Regardless, just remember that the sweet spot (which is the area you center on your charger) is unusually low on the N6. You want the center of your charger to be centered horizontally on the N6, but vertically, be just below the bottom of the volume rocker.
I have the Orb and it works fine. The other person was correct when he said it doesn't stick in place as well. You have to be slightly careful how you place it or it might slide down so that the phone is resting on the table but once it is on it stays in place.
I have read the Tylt charger works well.(http://www.amazon.com/TYLT-Wireless-Charger-all-Phones/dp/B00DG8NUC8) I am considering getting one even though they are really expensive so I can simply plop my phone down without having to think about it at all and know it will work fine and not fall off.
I do have the flat nokia dt-900 and it works well and isn't fussy about placement. With the amoled screen I want it tilted to use as a clock at night.
The Nokia DT-910 looks OK. Its about $35
falcon26 said:
The Nokia DT-910 looks OK. Its about $35
Click to expand...
Click to collapse
I can vouch for that charger. Worked great on my N5, works perfect on my N6. It's such a great charger that when I bought my N6, and gave my wife my N5, I had to order another DT-910, because no way in hell she was getting mine.
OK I'm about to order the Nokia 910. And again it does work great with the Nexus 6 correct? Also what color is the LED on the stand when charging? Amazon has it for $49
Thanks!
falcon26 said:
OK I'm about to order the Nokia 910. And again it does work great with the Nexus 6 correct? Also what color is the LED on the stand when charging? Amazon has it for $49
Thanks!
Click to expand...
Click to collapse
Yes, it works perfectly with the N6. The LED on the bottom is white. It's very noticeable, but isn't "light up the room" bright like a lot of chargers.
OK ordered it from Amazon. Get it Tuesday same day as I get my Nexus 6
Duh I totally forgot to ask. Will this charger work the the Nexus 6 if its in a case?
falcon26 said:
Duh I totally forgot to ask. Will this charger work the the Nexus 6 if its in a case?
Click to expand...
Click to collapse
As with any qi charger, it will as long as the case isn't metal or crazy thick.
Aw OK perfect. The one I'm getting is super thin...
I just ordered this case. Looks thin enough...
http://www.amazon.com/Nexus-Case-Pr...&qid=1416694717&sr=1-21&keywords=Nexus+6+case
jt3 said:
I can vouch for that charger. Worked great on my N5, works perfect on my N6. It's such a great charger that when I bought my N6, and gave my wife my N5, I had to order another DT-910, because no way in hell she was getting mine.
Click to expand...
Click to collapse
Can I have a picture please
I'm curious about how big does the N6 look while docked. I currently like mine laying down on a pad, but kind of curious of how tall it is when on a dock like that.
So a while back I ordered two moto stands because they were on sale. I hardly use one of them so I decided to modify one.
This is what I came up with because I had been wanting a qi wireless stand. It was a lot easier than I thought.
Took apart one of the stands. Under the pad are just four lil screws, then just clipped off a couple of tabs so that it can lay flat on the back of the qi charger.
I didnt want to use super glue to stick them together, then I remembered I had some adhesive for cell phone screens and that stuff is strong, for being super thin (i think 1/16)
Here are some pics. Works awesome and looks good.
Looks nice. I like it. Props on the creativity.
oh btw i took the pics with my N6 lol
I might try this with mine, I mainly use it for holding my phone when I do work but this is a good idea.
This inspired me. I just bought all of the stuff to do this.
skndeep102 said:
This inspired me. I just bought all of the stuff to do this.
Click to expand...
Click to collapse
haha awesome
With this setup, it only charges while it's standing up. I wanted it to charge both ways standing and laying on the side. But now I like that I can lay it on its side after its done charging, without it continuing to charge.
albert1500 said:
haha awesome
With this setup, it only charges while it's standing up. I wanted it to charge both ways standing and laying on the side. But now I like that I can lay it on its side after its done charging, without it continuing to charge.
Click to expand...
Click to collapse
Yeah I might see if I can't change the position of the charging pad a bit so I can charge it on its side. I'd like to use it as an alarm clock type dock.
links to the parts you used?
skndeep102 said:
Yeah I might see if I can't change the position of the charging pad a bit so I can charge it on its side. I'd like to use it as an alarm clock type dock.
Click to expand...
Click to collapse
It's possible, the charger would just need to be lower. Or if you had one of those rectangular ones that have like 3 coils. I think theres one on amazon that I saw thats the same thickness as this round one.
Jrmiller said:
links to the parts you used?
Click to expand...
Click to collapse
charger
http://www.amazon.com/Anker-Ultra-S...6486&sr=1-5&keywords=qi+wireless+charging+pad
stand
http://www.amazon.com/Motorola-Univ...qid=1420346530&sr=1-1&keywords=motorola+stand
adhesive tape i used - this is not the one i ordered, just similar. I had mine laying around for a couple years or so
http://www.amazon.com/1mm-Digitizer...-2&keywords=mobile+phone+screen+adhesive+tape
albert1500 said:
charger
http://www.amazon.com/Anker-Ultra-S...6486&sr=1-5&keywords=qi+wireless+charging+pad
stand
http://www.amazon.com/Motorola-Univ...qid=1420346530&sr=1-1&keywords=motorola+stand
adhesive tape i used - this is not the one i ordered, just similar. I had mine laying around for a couple years or so
http://www.amazon.com/1mm-Digitizer...-2&keywords=mobile+phone+screen+adhesive+tape
Click to expand...
Click to collapse
thanks. gonna build one or two :highfive:
albert1500 said:
It's possible, the charger would just need to be lower. Or if you had one of those rectangular ones that have like 3 coils. I think theres one on amazon that I saw thats the same thickness as this round one.
Click to expand...
Click to collapse
Could put the charge port at the bottom and run the cord through the back of the stand?
skndeep102 said:
Could put the charge port at the bottom and run the cord through the back of the stand?
Click to expand...
Click to collapse
I dont think it would make a difference with that charger, I tried it that way and it wouldn't charge the phone sideways.
Just got a nexus 6 and i see that this stand is on sale.
Does the charging pad work with the N6 in that position?
I like the subtle plug for FKupdater.
How well does it work with a case? My nexus 4 qi charger works while the other I got for my Sammie doesn't. The nexus charger is just very difficult to find the sweet spot and get it to stay there. I'm currently is using the supcase unicorn beetle heavy duty case, awesome case by the way. Thanks
rewdboy843 said:
How well does it work with a case? My nexus 4 qi charger works while the other I got for my Sammie doesn't. The nexus charger is just very difficult to find the sweet spot and get it to stay there. I'm currently is using the supcase unicorn beetle heavy duty case, awesome case by the way. Thanks
Click to expand...
Click to collapse
If you make this set up it works great. I've got the ringke max case on mine and it works fine.
Awesome. Buying materials right meow! Thanks
rewdboy843 said:
Awesome. Buying materials right meow! Thanks
Click to expand...
Click to collapse
Buy the dock on motorola.com, its on sale for $9.99 right now
http://www.motorola.com/us/accessory-family-page-1/Flip-Stand/m-Flip-Stand.html
vavaud said:
Just got a nexus 6 and i see that this stand is on sale.
Does the charging pad work with the N6 in that position?
Click to expand...
Click to collapse
with this setup, it will only charge in the portrait position and yes works perfect with the N6
Too many threads, which qi car charger holder have you tried that actually works with this beast please. Others have had to customise and diy but am useless at diy?
marvi0 said:
Too many threads, which qi car charger holder have you tried that actually works with this beast please. Others have had to customise and diy but am useless at diy?
Click to expand...
Click to collapse
I'm using the Qi-infinity dock from Amazon. It works fine. I actually have a Spigen Ultra Hybrid case on there. Although I haven't tested it to the extent of charging it while running GPS, BT and all that simultaneously.
http://www.amazon.com/gp/product/B00N4H1R1M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
jiannichan said:
I'm using the Qi-infinity dock from Amazon. It works fine. I actually have a Spigen Ultra Hybrid case on there. Although I haven't tested it to the extent of charging it while running GPS, BT and all that simultaneously.
[/url]
Click to expand...
Click to collapse
Is there plenty of room to plug an external charger into the bottom of the nexus 6 if you need some extra power?
That looks very similar to one I just bought. Does the cradle push down on the volume down button?
bigf00t said:
That looks very similar to one I just bought. Does the cradle push down on the volume down button?
Click to expand...
Click to collapse
What ons did you buy?
jiannichan said:
I'm using the Qi-infinity dock from Amazon. It works fine. I actually have a Spigen Ultra Hybrid case on there. Although I haven't tested it to the extent of charging it while running GPS, BT and all that simultaneously.
http://www.amazon.com/gp/product/B00N4H1R1M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Same question, does it push down on power and volume buttons?
marvi0 said:
Same question, does it push down on power and volume buttons?
Click to expand...
Click to collapse
+1
I have used this Dock from Amazon for over a month and works great. The side arm will push down on the volume down button unfortunately. The arm can be modified to avoid this, or use a case with cut-outs for the buttons (I use Spigen slim fit cases).
The dock works great though
http://www.amazon.com/dp/B00OFQXEKS/ref=cm_sw_r_udp_awd_3ekXub051HZ0J
Sent from my Nexus 6 using Tapatalk
marvi0 said:
Same question, does it push down on power and volume buttons?
Click to expand...
Click to collapse
No, it doesn't. There is an opening on the bottom for you to plug in a USB. It doesn't push down on the buttons either.
I can't choose between Tylt and iOttie.
Any ideas?
http://www.amazon.com/Itian-Wireles...8&qid=1428890394&sr=8-1&keywords=itian+car+qi
belek1979 said:
I can't choose between Tylt and iOttie.
Any ideas?
Click to expand...
Click to collapse
Get the Tylt. The thing I've noticed about wireless chargers is the more expensive ones always work. I guess that's why I've got a Nokia and a Tylt for the car.
ChristianJay said:
Get the Tylt. The thing I've noticed about wireless chargers is the more expensive ones always work. I guess that's why I've got a Nokia and a Tylt for the car.
Click to expand...
Click to collapse
Yeah, but iOttie is only 4 cents cheaper
How aboit heating and charging time in Tylt? If screen phone is off, how long does it take to go from for example 10% to 60%?
belek1979 said:
Yeah, but iOttie is only 4 cents cheaper
How aboit heating and charging time in Tylt? If screen phone is off, how long does it take to go from for example 10% to 60%?
Click to expand...
Click to collapse
It chargers very quickly. The desktop Nokia I use takes much longer in comparison but I've been using it for years now, had a DNA and a g2 after that, now a N6. The Tylt is just a quality piece and looks great too.
The reviews on Amazon say that the Tylt Vu car charger doesn't work very well with the Nexus 6. The claims seem to be about how well it actually grips and holds the phone (and not so much about charging or feeling cheap).
I've got iOttie already. When plug in motorola stock charger then it charges 50% in about 90 minutes. Grip is very good. No risk of drop. Battery during the charging is cold. Tomorrow I'll try a car charger.
I have the Ghostek Qi car charger coming today from amazon. I'll post pics when it gets here.
http://www.amazon.com/gp/product/B00NPC8SUO
Apparently the Nexus 6 fits without a case pretty tightly. I'll know more once I try it myself. $29.99 is one of the better prices I have seen.
kayonesoft said:
The reviews on Amazon say that the Tylt Vu car charger doesn't work very well with the Nexus 6. The claims seem to be about how well it actually grips and holds the phone (and not so much about charging or feeling cheap).
Click to expand...
Click to collapse
It grips and holds the phone fine naked and with a thin case. Using it with my Supcase Unicorn Beetle Pro rugged case works but its jammed in there.
I can tell you which one not to buy, even know it has a ton of good reviews.
Wireless Charger, TechMatte Qi Wireless Charging Pad for Galaxy S6,...
http://www.amazon.com/dp/B00F1SHFJA/ref=cm_sw_r_udp_awd_ILAlvb1EPQJKD
It's got a terrible sweet spot that has the phone off centered. The pad itself feels like it came right off the .99 cent ship from China. I'm returning it as we speak and getting something more quality. Just wanted to let you know in case the 25 dollar and almost 5 star review enticed anyone. Hopefully the next one will be better.
I read a few reviews about the phone over heating on the tylt....can anyone confirm or deny that? It looks quality and I'm also wondering if it has to be set exactly in place or if it has some wiggle room. Thanks in advance.
Sent from my SM-N910V using XDA Free mobile app
jiannichan said:
I'm using the Qi-infinity dock from Amazon. It works fine. I actually have a Spigen Ultra Hybrid case on there. Although I haven't tested it to the extent of charging it while running GPS, BT and all that simultaneously.
http://www.amazon.com/gp/product/B00N4H1R1M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I use this one .If I leave my distronic slim fit on it pops on and off charging.Take off the case and it works fine. It does touch the bottom volume button but hasn't been a problem.