Hello, all. I'll try to be quick and please bear with me because I'm quite new at this:
- Have XT910; bought it with T-Mobile-branded 4.1.2. Root/Safestrap worked flawlessly. Ran with CM11 for many months.
- Tried to update CM11 to CM12 OTA and it bricked my phone; bootlooped, recovery went back to stock. (was my fault, didn't check CM forums for install instructions)
- Had to recover by using sbf and RSD Lite. Found this thread containing firmwares.
- Found T-Mobile ROM in the list, but unable to download because droid-developers returns a File Not Found error.
- Same with most other european downloads, except for Retail British.
- Flash Retail British
- Have a hard time rooting phone with all the easily available methods. Didn't keep logs, but I kept getting "access denied" type of errors.
- Finally find a dodgy Chinese app that seemed to root the phone. Superuser installed; Root checker says everything is OK.
- Install Safestrap, make ROM slot
- Try to flash LiquidSmooth. Fail. Try to install CM 10/11/12. Fail.
- Figured in my limited brain that the problem is because Retail British comes with encryption, whereas my T-Mobile version before getting it borked did not.
I can try to get logs from TWRP if you think it helps, but I'd mostly love it if someone had a copy of the T-Mobile or any other unencrypted firmware compatible with my EU XT910 that I can try flashing.
Any and all questions/advice will be highly appreciated!
Thank you.
See
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT912 using Tapatalk
---------- Post added at 10:00 AM ---------- Previous post was at 10:00 AM ----------
Several firmware links in list
Sent from my XT912 using Tapatalk
sd_shadow said:
See
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT912 using Tapatalk
---------- Post added at 10:00 AM ---------- Previous post was at 10:00 AM ----------
Several firmware links in list
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
You are a life saver! Thank you a lot
@sd_shadow
I found a 4.1.2 T-Mobile SBF and successfully flashed it, but any of the usual root methods fail. Have you ever come across this issue?
ftpaddict said:
@sd_shadow
I found a 4.1.2 T-Mobile SBF and successfully flashed it, but any of the usual root methods fail. Have you ever come across this issue?
Click to expand...
Click to collapse
Saferoot? [ROOT] Saferoot
Sent from my XT912 using Tapatalk
sd_shadow said:
Saferoot? [ROOT] Saferoot
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
Worked! I didn't find this method because it doesn't say anywhere that it works with the XT910.
Safestrap works and so do other ROMs. Thank you again.
ftpaddict said:
Worked! I didn't find this method because it doesn't say anywhere that it works with the XT910.
Safestrap works and so do other ROMs. Thank you again.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT894 using Tapatalk
Related
Hi all experts,
I have been dying to upgrade my Razr to ICS, and trying hard on the various guides in this forum....but no luck
I have used http://forum.xda-developers.com/showthread.php?t=1757766 this guid as well, and went through all the pages but could not find any solutions.
Currently (Still) :crying:I am having following specs with my Razr (With Clockwork Mod)
System Version:- 65.1.40.XT910.PSHAsiaRetail.en.03
Android Version:- 2.3.6 (GB)
Build Number:- 6.5.1-167-SPD-IRD-40
Build Date:- 6th Feb
I have also tried by restoring to factory settings and erasing the cache, but had serial 7 error everytime I tried the OTA file from the above link. My phone is rooted, so also tried by temporarily unrooting it through OTA Rootkeeper.
Tried all these premutations and combinations, but no luck:crying:
I would appreciate if some one could guied me on what to do to have my Razr running on ICS. Thanks all
You're following the wrong thread.
This one is for yours
http://forum.xda-developers.com/showthread.php?t=1748944
Sent from my XT910 using Tapatalk 2
Try this
http://forum.xda-developers.com/showthread.php?t=1748944
Flash GB fastboot from phasia then update ota.
Sent from my XT910 using xda app-developers app
thanx farhinto, but your thread directs me to some nexus thread, are you sure is it the correct location, because I am not fimding any usefull solutions.
Sent from my XT910 using xda app-developers app
Thanx thepsen I have been through this thread as well in which everybody said to follow the 2nd post by blisslove. I could not get the 2nd point with somthing called eprj-mfastboot.
Is it the fastboot.exe file which is installed after installing Android SDK? If not, can you provide me the link because I have already cursed google for not giving me any link to this file. Also do we need to install the 2 files mentioned in point 1 & 2, through RSD lite?
You can find it here
http://dl.xda-developers.com/attach...006cdc7/1/0/8/0/6/3/8/eternityprj_Fla****.zip
Sent from my XT910
Dang... Lol...
Sorry about that, link fixed...
Just use sbf file from post #2 with RSD lite. And follow instructions there
daveterminator said:
Thanx thepsen I have been through this thread as well in which everybody said to follow the 2nd post by blisslove. I could not get the 2nd point with somthing called eprj-mfastboot.
Is it the fastboot.exe file which is installed after installing Android SDK? If not, can you provide me the link because I have already cursed google for not giving me any link to this file. Also do we need to install the 2 files mentioned in point 1 & 2, through RSD lite?
Click to expand...
Click to collapse
Since your are on 2.3.6 . You need to download GB fastboot from post #2 . I believe that file is around 800mb. RSD Flash this file to apfast boot mode . Then update ota. You don't need to flash any boot.img or system sign.
Sent from my XT910 using xda app-developers app
farhanito said:
Dang... Lol...
Sorry about that, link fixed...
Just use sbf file from post #2 with RSD lite. And follow instructions there
Click to expand...
Click to collapse
+1
Sent from my XT910 using xda app-developers app
Finally, I have ICS now. Thanks to all you experts!!
Thank you all!!:good::victory:
Because of you all experts, I am now able to play with ICS on my Razr.
Now its a time to a bit of Rock n Roll:victory:
To prevent future update errors with status 7, do not and never ever delete or uninstall system apps or bloatware. Just freeze them.
Sent from my ICS Razr XT910
Thanks for the informative thread! I follow the same directions if I'm rooted right?
651.1.40XT910.AsiaRetail.en.03
2.3.6.
U_03.1c.91p
Device is rooted.
Sorry if this was answered and i missed it but just want to make sure before i attempt this.
Device of mass distraction
Hey guys,I'm from libya and bought used Motorola X910 from Ebay (U.S) it has been shipped to me,it's rooted cm9. Android 4.0.4 , Kernel 2.6.35.7-g93798510 [email protected]
CyanogenMod version
9.0.0-RCO-spyder-Unofficial
So I'm having problems till this moment:
-Can't make videos by camera at all,sometimes it froze
-when I turn the Bluetooth On,the Device shut off and keep restarting,it doesn't let me to get into the desktop
Plz i'm asking what could i do for this?
Try to get back to stock by using RSDlite & fastboot file. You can search both in this forum.
Sent from my iPad using Tapatalk HD
elias.parasini said:
Try to get back to stock by using RSDlite & fastboot file. You can search both in this forum.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
If you go to "about phone", you can find the cyanomedmod version...search in the forum for an updated version and follow the guide to update it.
Could be fixed you know and the CM9 is a good OS.
If all else fails then flash back to stock
nameite said:
If you go to "about phone", you can find the cyanomedmod version...search in the forum for an updated version and follow the guide to update it.
Could be fixed you know and the CM9 is a good OS.
If all else fails then flash back to stock
Click to expand...
Click to collapse
I appreciate,could i know the details how to flash back the stock?
Any replies guys?
http://forum.xda-developers.com/showthread.php?p=29242699
Files & How to is linkend (Back to Stock)
Sent from my CustomiZed XT910
---------- Post added at 03:19 AM ---------- Previous post was at 03:16 AM ----------
But these are all ICS Files!
I'm not sure about your Phones Region (Asia / EU / Latam)
You only can flash the right one for your Phones Region!!!!
Sent from my CustomiZed XT910
the region does not really matter. its mostly if the phone is from CDMA or GSM based stock. the region more or less implies the update path/carrier options preloaded on the phone.
correct me if im wrong =_= haven't had my coffee for the day
The Region does matter. If you wanna flash an Latam Rom on an EU RazR, you have to delete your CID (mmmcblk1p18) or you will get an cdt.bin failure. And it's not that easy to get your CID back, when you got no backup of YOUR's.
Only the Asia & EU Fastbootfiles can be changed without that.
Sent from my CustomiZed XT910
ah you are right >.> damn its 11am and i havent had my coffee yet.
LoL...here it's 5:20am and i had a lot of coffee during my night shift :sly:
Sent from my CustomiZed XT910
This is what my phone says.
I'm new to Motorola Razar,I really need help for the specific steps
I updated to JB a while ago on my XT912. Now I try to boot up and I get a Flash Failure (Not boot failure!) Again, I am running in Jelly Bean 4.1.2 on my NON ROOTED XT912. How do I get out of the Flash Failure? Thanks a lot.
Google betakang or batakang (I forget which one) JB unbrick. Or search around the android development forum. Make sure you have the OTA on your sdcard. It will flash ur phone back to ICS which will fail when complete. Then go into recovery and apply the OTA.
~SU!C!D3~ on Tapatalk
queberican351 said:
Google betakang or batakang (I forget which one) JB unbrick. Or search around the android development forum. Make sure you have the OTA on your sdcard. It will flash ur phone back to ICS which will fail when complete. Then go into recovery and apply the OTA.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
Thanks so freaking much, man. I'll try it!
Worked for me many times. All credit goes to the developer
~SU!C!D3~ on Tapatalk
queberican351 said:
Google betakang or batakang (I forget which one) JB unbrick. Or search around the android development forum. Make sure you have the OTA on your sdcard. It will flash ur phone back to ICS which will fail when complete. Then go into recovery and apply the OTA.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
My searches have no results for the JB Unroot.... can you give me a link? Thx
http://batakang.com/ftp/?dir=DROID_RAZR
Last one on page
~SU!C!D3~ on Tapatalk
queberican351 said:
http://batakang.com/ftp/?dir=DROID_RAZR
Last one on page
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
God that's f**king amazing!! Thanks a lot! Downloading it right now. I'll let u know how it went. One more thing, Do i have to update back to JB? Or can I stick with ICS? Or will that not work?
You can also download razr blade to acquire root from the same page. I believe razrblade is written by root guru @djrbliss I'm not sure who the credits for the unbrick go to but it's in the release.
~SU!C!D3~ on Tapatalk
---------- Post added at 02:09 AM ---------- Previous post was at 02:07 AM ----------
You'll have to go back to JB. The unbrick tool essentially puts ur phone back into a state that will accept the OTA. As of yet I don't believe downgrade is possible. I may be wrong but not to my knowledge.
~SU!C!D3~ on Tapatalk
queberican351 said:
You can also download razr blade to acquire root from the same page. I believe razrblade is written by root guru @djrbliss I'm not sure who the credits for the unbrick go to but it's in the release.
~SU!C!D3~ on Tapatalk
---------- Post added at 02:09 AM ---------- Previous post was at 02:07 AM ----------
You'll have to go back to JB. The unbrick tool essentially puts ur phone back into a state that will accept the OTA. As of yet I don't believe downgrade is possible. I may be wrong but not to my knowledge.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
My phone is fixed!!! THANK YOU SO MUCH! You and Mattlgroff are the reasons why I am not at verizon buying a replacement phone. I can't thank you enough! THANKS SOOO MUCH!
Igwtapc originally pointed me in the direction for the fix. Glad it helped you too. If my computer had a speed dial this would be on #1. I've had to use it an average of twice a day trying to unlock gsm.
~SU!C!D3~ on Tapatalk
Help-me! Please!
Razr1 said:
My searches have no results for the JB Unroot.... can you give me a link? Thx
Click to expand...
Click to collapse
Friend! This process works on HTC One X? I install a custom rom but it did not work and I can not connect more! Help me! Please!
ok i ran the program booted into stock recovery selected the OTA from the root sd and it gets to verifying current system then it says assert failed: apply_patch_check....help!!!!
Hi, I just recently got a Droid X2 with version 2.3.5 already installed. I really like CM10 (4.1,2 JB) and want to install it but 2.3.4 is required and I rooted 2.3.5.
I need to know would i have to un-root the x2 before I downgrade 2.3.4 then re-root the phone or would I be able to jump from 2.3.5 (still rooted) to 4.1.2.
I'm no stranger to rooting a android but X2 is different from what i'm use to I don't want to take a risk by bricking the phone.
No need to unroot, but will need to root 2.3.4, try pete's root tools
Link to sbf, ezSBF, pete's root and more in my list
sd_shadow's (themib) [Collection] of Links for Droid X2
Sent from my XT862 using Tapatalk
Demonicsouth said:
I'm no stranger to rooting a android but X2 is different from what i'm use to I don't want to take a risk by bricking the phone.
Click to expand...
Click to collapse
DX2 has a locked bootloader, not going to brick it.
sd_shadow said:
No need to unroot, but will need to root 2.3.4, try pete's root tools
Click to expand...
Click to collapse
Ok so I need to flash into 2.3.4, re-root it then flash into CM10 (4.1.2 JB)
Demonicsouth said:
Ok so I need to flash into 2.3.4, re-root it then flash into CM10 (4.1.2 JB)
Click to expand...
Click to collapse
Yes flash 2.3.4 with RSD lite or ezSBF
Sent from my XT862 using Tapatalk
sd_shadow said:
Yes flash 2.3.4 with RSD lite or ezSBF
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Ok, well i heard that RSD isn't good with phones swapped to straighttalk which mines is (has something to do with radio frequency). I'm using ezSBF but in the video tut i saw showed a droid X which in the tutorial, the guy held down the camera button. I don't have that. what should i do
Demonicsouth said:
Ok, well i heard that RSD isn't good with phones swapped to straighttalk which mines is (has something to do with radio frequency). I'm using ezSBF but in the video tut i saw showed a droid X which in the tutorial, the guy held down the camera button. I don't have that. what should i do
Click to expand...
Click to collapse
using ezSBF DX2 4.5.1.iso? follow my instructions ezSBF DX2 2.3.4 with zergrush root option
---------- Post added at 11:17 PM ---------- Previous post was at 11:13 PM ----------
Boot DX2 to RSD support (bootloader) from http://forum.xda-developers.com/showthread.php?t=1317707
a. Turn off your phone.
b. Power up your phone by pressing and holding the VOLUME UP BUTTON and then pressing the POWER BUTTON until you see the words STARTING RSD PROTOCOL SUPPORT (in white) at the top of the DX2’s screen. This should only take about 3-5 seconds.
---------- Post added at 11:21 PM ---------- Previous post was at 11:17 PM ----------
edited my instructions to include that
---------- Post added at 11:27 PM ---------- Previous post was at 11:21 PM ----------
Note: STARTING RSD PROTOCOL SUPPORT is all you will see on DX2
sd_shadow said:
using ezSBF DX2 4.5.1.iso? follow my instructions ezSBF DX2 2.3.4 with zergrush root option
---------- Post added at 11:17 PM ---------- Previous post was at 11:13 PM ----------
Boot DX2 to RSD support (bootloader) from http://forum.xda-developers.com/showthread.php?t=1317707
a. Turn off your phone.
b. Power up your phone by pressing and holding the VOLUME UP BUTTON and then pressing the POWER BUTTON until you see the words STARTING RSD PROTOCOL SUPPORT (in white) at the top of the DX2’s screen. This should only take about 3-5 seconds.
---------- Post added at 11:21 PM ---------- Previous post was at 11:17 PM ----------
edited my instructions to include that
---------- Post added at 11:27 PM ---------- Previous post was at 11:21 PM ----------
Note: STARTING RSD PROTOCOL SUPPORT is all you will see on DX2
Click to expand...
Click to collapse
if i boot in RSD support, do i follow the RSD tut. ( i will if i have to, got all required files for both RSD and ezSBF) and will RSD mess up my straight-talk flash. (as i said last time, i heard but no quite sure).
Demonicsouth said:
if i boot in RSD support, do i follow the RSD tut. ( i will if i have to, got all required files for both RSD and ezSBF) and will RSD mess up my straight-talk flash. (as i said last time, i heard but no quite sure).
Click to expand...
Click to collapse
rsd support is used for both rsd lite and ezSBF
---------- Post added at 11:46 PM ---------- Previous post was at 11:45 PM ----------
Don't use RSD Lite program on phone flashed to a different carrier
sd_shadow said:
rsd support is used for both rsd lite and ezSBF
Click to expand...
Click to collapse
ok, well i'll give it a shot, i already got the iso burned to the CD so now it time to flash
also updated ezSBF instructions and pics
sd_shadow said:
also updated ezSBF instructions and pics
Click to expand...
Click to collapse
Awesome, Thanks for the help, now im on 2.3.4. All there is left to do now is root and install CM10
I would have just used CD to root and bootstrap
Sent from my XT862 using Tapatalk
sd_shadow said:
I would have just used CD to root and bootstrap
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
oh, is that still an option?
Demonicsouth said:
oh, is that still an option?
Click to expand...
Click to collapse
Yes, you can restart CD if needed
Just select root and bootstrap option
Sent from my XT862 using Tapatalk
sd_shadow said:
Yes, you can restart CD if needed
Just select root and bootstrap option
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Nice, that done with, so i can now flash CM10? video tut on it.
Demonicsouth said:
Nice, that done with, so i can now flash CM10? video tut on it.
Click to expand...
Click to collapse
Yes, should be a link to a installing cm10 for dx2 video in my list
sd_shadow's (themib) [Collection] of Links for Droid X2
Sent from my XT862 using Tapatalk
sd_shadow said:
Yes, should be a link to a installing cm10 for dx2 video in my list
sd_shadow's (themib) [Collection] of Links for Droid X2
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
And with that, im now rocking CM10, Thanks So much for the help.
Debugging is set as is unknown sources.
USB connection does not show in navigation bar.
There are no options to change debugging settings.
Used three different cables in three different USB ports.
Phone is on and plugged in, does not show in Device Manager
Nor does Motorola One-Click. Says it is searching for device.
Any idea on what is going on and how to solve this.
Thanks,
dlw
Which system version is on phone?
Sent from my DROIDX using Tapatalk
sd_shadow said:
Which system version is on phone?
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Version # 2.3.5: System # 1.3.418 MB870
The directions I used were for the 2.3.5 not the 2.3.4
dlw1146 said:
Version # 2.3.5: System # 1.3.418 MB870
The directions I used were for the 2.3.5 not the 2.3.4
Click to expand...
Click to collapse
You used magic md5 method? and watch video linked here? [How To] Root DX2 2.3.5/1.3.418 magic md5 method
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
anything else was for 1.3.412 or 1..3.413 not 1.3.418
sd_shadow said:
You used magic md5 method? and watch video linked here? [How To] Root DX2 2.3.5/1.3.418 magic md5 method
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
anything else was for 1.3.412 or 1..3.413 not 1.3.418
Click to expand...
Click to collapse
Yes, I tried that one.
dlw1146 said:
Yes, I tried that one.
Click to expand...
Click to collapse
try one of the other 4 options
sd_shadow said:
try one of the other 4 options
Click to expand...
Click to collapse
I'll have to do it tomorrow.
Please help me through this.
dlw
dlw1146 said:
I'll have to do it tomorrow.
Please help me through this.
dlw
Click to expand...
Click to collapse
I have 2 Moto Droid X2's. One is recognized by debugging. One is not.
Debugging is on as well as download from unknown sources.
Tried 3 different cables at three different USB ports.
Any ideas how to solve this?
dlw
dlw1146 said:
I have 2 Moto Droid X2's. One is recognized by debugging. One is not.
Debugging is on as well as download from unknown sources.
Tried 3 different cables at three different USB ports.
Any ideas how to solve this?
dlw
Click to expand...
Click to collapse
I would flash the 2.3.4/1.3.380 firmware(sbf) with rsd lite or ezSBF
which you need to do anyways if you want cm7, cm9, cm10...
or
reflash 2.3.5 firmware with rsd lite or flash my extracted fastboot files with moto-fastboot.exe
sd_shadow said:
I would flash the 2.3.4/1.3.380 firmware(sbf) with rsd lite or ezSBF
which you need to do anyways if you want cm7, cm9, cm10...
or
reflash 2.3.5 firmware with rsd lite or flash my extracted fastboot files with moto-fastboot.exe
Click to expand...
Click to collapse
As I said, I have to Droid X2's. One that could access debugging mode, one that could not.
Currently flashing the one that could access debugging with RSDLite. I already had it and have used it before.
It passed. Now to try the other one that will not go into debugging mode.
Also, how to install cm10?
dlw
dlw1146 said:
As I said, I have to Droid X2's. One that could access debugging mode, one that could not.
Currently flashing the one that could access debugging with RSDLite. I already had it and have used it before.
It passed. Now to try the other one that will not go into debugging mode.
Click to expand...
Click to collapse
debugging has nothing to do with flashing sbf
Also, how to install cm10?
dlw
Click to expand...
Click to collapse
[Video] How to install CM10 Alpha 3 Jelly Bean on the Droid X2
or rather usb debugging has no affect on flashing stock firmware/sbf,
if usb debugging is not working, flashing stock firmware should fix it.
wiping data in stock recovery should also be done before and/or after flashing stock firmware/sbf.
sd_shadow said:
or rather usb debugging has no affect on flashing stock firmware/sbf,
if usb debugging is not working, flashing stock firmware should fix it.
wiping data in stock recovery should also be done before and/or after flashing stock firmware/sbf.
Click to expand...
Click to collapse
Downloaded and installed cm-10 alpha 1... too buggy. Tried alpha 2 but could not get it to flash.
What is the latest STABLE rom for the X2? Any rom - not Verizon. Just stable.
Used Liquid Smooth on my Note 2. Loved it. But no version for X2.
I'm using my backup -X2- until I can fix my Note 2.
Thanks for all you help.
dlw
dlw1146 said:
Downloaded and installed cm-10 alpha 1... too buggy. Tried alpha 2 but could not get it to flash.
What is the latest STABLE rom for the X2? Any rom - not Verizon. Just stable.
Used Liquid Smooth on my Note 2. Loved it. But no version for X2.
I'm using my backup -X2- until I can fix my Note 2.
Thanks for all you help.
dlw
Click to expand...
Click to collapse
Latest: Cm 10 alpha 3 http://d-h.st/82g cm-10-20130113-UNOFFICIAL-daytona.zip (almost 2 years old)
Stable: Eclipse v2.3 7/25/12 (2 1/2 years old)
sd_shadow said:
Latest: Cm 10 alpha 3 http://d-h.st/82g cm-10-20130113-UNOFFICIAL-daytona.zip (almost 2 years old)
Stable: Eclipse v2.3 7/25/12 (2 1/2 years old)
Click to expand...
Click to collapse
Where can stock 2.3.5 be found?
Found stock roms on 'Stockroms.com', but aren't listed as 2.3.5.
dlw
dlw1146 said:
Where can stock 2.3.5 be found?
Found stock roms on 'Stockroms.com', but aren't listed as 2.3.5.
dlw
Click to expand...
Click to collapse
links in my How To Flash a SBF/ (Firmware) Using RSD Lite
dlw1146 said:
Where can stock 2.3.5 be found?
Found stock roms on 'Stockroms.com', but aren't listed as 2.3.5.
dlw
Click to expand...
Click to collapse
Found it plus others here:
https://sites.google.com/site/motosbf
dlw1146 said:
Found it plus others here:
https://sites.google.com/site/motosbf
Click to expand...
Click to collapse
Yes that link is in my SBF list
sd_shadow said:
Yes that link is in my SBF list
Click to expand...
Click to collapse
Install Eclipse 2.3.
Error: Signature verification failed while trying to install via recovery.
Any ideas on this?
dlw
dlw1146 said:
Install Eclipse 2.3.
Error: Signature verification failed while trying to install via recovery.
Any ideas on this?
dlw
Click to expand...
Click to collapse
which recovery version does it say in recovery?