Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
nougiw said:
Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
Click to expand...
Click to collapse
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Call_Me_Hudson said:
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Click to expand...
Click to collapse
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
nougiw said:
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
Click to expand...
Click to collapse
who was the original ROM firmware from
hhan2220 said:
who was the original ROM firmware from
Click to expand...
Click to collapse
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
nougiw said:
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
Click to expand...
Click to collapse
Now a days handset manufactures customise ROM for different markets they see (sim free) OR the sales channel through service providers (network sales) . they also tweak the ROM loader points accordingly. So the only option for you is to find out where the original ROM backup and try and load it.
Any luck finding the stock ROM for the 4030X model?
d3vil said:
Any luck finding the stock ROM for the 4030X model?
Click to expand...
Click to collapse
No, unfortunately I haven't so far. Could you possibly help me with that?
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i gues is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
arturkolacz said:
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i guess is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
Click to expand...
Click to collapse
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
nougiw said:
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
Click to expand...
Click to collapse
1) No
2) Onetouch s'pop
3) Yes its 4030X
arturkolacz said:
1) No
2) Onetouch s'pop
3) Yes its 4030X
Click to expand...
Click to collapse
I've sent you a couple private messages, have you seen 'em? I'm asking because I got no reply yet...
Not much of an android expert, but I recently(as in 5 hours ago) bricked my one touch 4033a and I was pretty frantic. But, you should be able to reset the phone through holding down volume then power. Unless that is not possible as well. I'm not sure if the rom from my provider will be able to help you. PM me if that's possible, and instruct me how to do that.
one touch 4030x
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
I finally took it to the service center and had it fixed. They charged nothing. They didn't even ask anything. This is your best chance if you'd ask me. Yet when I get back home cause I'm away for a couple days, I could possibly send you my backup to try and upload it to your phone, but I have to warn you that this is highly probable to complicate things even more. Think it over and let me know.
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
clay0001 said:
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
Click to expand...
Click to collapse
Don't even think about it. Since you haven't even routed the phone, service center is way your best solution. Do find that receipt!!
[deleted]
[deleted]
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
Hi there Junior and everybody
I am EXACTLY in the same situation. I was messing with the vold.fstab in order to switch external memory card as internal, and... BRICK!
Blank screen after "Alcatel'SPop" welcome logo. I tryed PWR+VOLUP and then "wipe data/factory reset" (without knowing what that really meant, i have to say and nothnig happened, i am still in stuck in the blank screen.
If i could get a rom image, i guess i could copy it into the external memory card and "apply update form phone memory".. Isn't it?
If so, now the issue is to find the proper rom: Alcatel onetouch S pop (4030X)
Any hint, help, advise?
thank you
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
septera said:
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
Click to expand...
Click to collapse
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
bernardstef said:
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
Click to expand...
Click to collapse
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
septera said:
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
Click to expand...
Click to collapse
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
http://www.cdiscount.com/informatiq...9716-quad-core/f-10798010212-spelite9716.html
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
https://www.dealabs.com/url/?e=AGfyxEyWcavcqyVJeRhZp7d5F8Z0KrLcgoS1mbga6vPZ1aLCP38R53nhHk/SlqhM
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode : https://download.chinavasion.com/download/Others/ceros_rev_firmware_install_9470.pdf
bernardstef said:
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode :
Click to expand...
Click to collapse
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
septera said:
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
Click to expand...
Click to collapse
Nice !
This tablet is great with 4.4.2 on it
Cheers !
Hello, Guys i really need one help from you, i've formatted s4 clone mediatek phone through sp flash tool 3.xxx :crying::crying: also i've selected scatter file of my phone i guess it was mtk6589 or something i can't remember when i hit the download button it wont let it flash it prompted as brom error s_ft_enable_dram_fail (4032) also i have tried like 10+ stock roms of s4 clone even i wasn't able to flash any i dont know im really sad about this please anyone can help me?:crying::crying::crying: im looking for this since 2 weeks before can't find any solution..
-Best Regards
please help me guys, you are the only hope :crying: im tired of looking on the forums and youtube :crying:
you need to know wich MTK cpu is running on your clone then google needrom and search for s4 clone and look for your mtk and try it you have no choice
just do that and you will revive your device
if you have link where you bought it online it will help
good luck
Hello androiders , I have a problem . I have a clone samsung galaxy S5 , and I want to reflash rom on it to fix it's problem (no signal it works just for some moments once). So i installed drivers and mtk droid tools and there writes mt6589 , ok I downloaded a lot of mt6589 rom's from internet and avery time I try to flash it , I get the same error is something like CHIP_TYPE_DO_NOT_MATCH . Can please somewone give me some help ? I don't want to go on service , because the scope is to me fix it , instead to know it's fixed. Thanks for reading , please help with any information.
This is a common issue with cheap knock off devices and to be honest you won't find much help here. We don't deal with cheap knock knock off devices and most developers don't touch anything with mtk chips.
Good day maam/sir,
im a new guy here and i want to say hello to all of you. is there any chance or solutions you can offer or share for to fix my bricked/bootloop Samsung A9 Pro Vietnam Copy/Clone??? thank you in advance to all of you, God Bless!!!
Staine777 said:
Good day maam/sir,
im a new guy here and i want to say hello to all of you. is there any chance or solutions you can offer or share for to fix my bricked/bootloop Samsung A9 Pro Vietnam Copy/Clone??? thank you in advance to all of you, God Bless!!!
Click to expand...
Click to collapse
so if you want help, you need to provide more information
please answer to the following questions
Bricked? bootloop at bootanimation, or stuck at bootlogo
processor? Mediatek MT6795?
how did it brick, what have you done brofre it bricked
stock rom aviable anywhere?
-- tried to flash stock rom with SP-Flashtool?
TimurAlaskara_TR said:
so if you want help, you need to provide more information
please answer to the following questions
Bricked? bootloop at bootanimation, or stuck at bootlogo
processor? Mediatek MT6795?
how did it brick, what have you done brofre it bricked
stock rom aviable anywhere?
-- tried to flash stock rom with SP-Flashtool?
Click to expand...
Click to collapse
i cant determine sir if it is brick or bootloop but one thing is for sure it is stocked on Samsung Logo. i was rooting my phone sir via kingroot. the root was a success but the SuperSU binary failed to update so i install and run SuperSUme. after the process i rebooted it because it says so, and that were the problem started sir. i think ROMs are available. but the device cannot be putted on Download Mode for Odin, id already tried it sir. i dont have any reference left sir. please, please, please help me sir... Thank you very much sir...
Staine777 said:
i cant determine sir if it is brick or bootloop but one thing is for sure it is stocked on Samsung Logo. i was rooting my phone sir via kingroot. the root was a success but the SuperSU binary failed to update so i install and run SuperSUme. after the process i rebooted it because it says so, and that were the problem started sir. i think ROMs are available. but the device cannot be putted on Download Mode for Odin, id already tried it sir. i dont have any reference left sir. please, please, please help me sir... Thank you very much sir...
Click to expand...
Click to collapse
I had a clone s4 some time ago called No1 S6, after some time its internal sd card got broken... i do not recommend it to root and flash custom rom to that phones.
it had an mtk6582 which was a midrange SoC while that now its one of the crappiest chipsets..
however, clone mediatek phones do not have a "download mode", so odin does not work as well
You need to get the real name of the phone, i think there was a youtuber who reviewed a clone galaxy a9 his youtubechannel name was "mayiandjay" you could contact him via email for the devices name.
Then search on needrom.com for a rom for that phone and flash it via SP flashtool. When flashing a rom to a mtk phone with spflashtool the phone just needs to be turned off, no need to get into any mode ;
TimurAlaskara_TR said:
I had a clone s4 some time ago called No1 S6, after some time its internal sd card got broken... i do not recommend it to root and flash custom rom to that phones.
it had an mtk6582 which was a midrange SoC while that now its one of the crappiest chipsets..
however, clone mediatek phones do not have a "download mode", so odin does not work as well
You need to get the real name of the phone, i think there was a youtuber who reviewed a clone galaxy a9 his youtubechannel name was "mayiandjay" you could contact him via email for the devices name.
Then search on needrom.com for a rom for that phone and flash it via SP flashtool. When flashing a rom to a mtk phone with spflashtool the phone just needs to be turned off, no need to get into any mode ;
Click to expand...
Click to collapse
Thank very much sir for this, its a relief for me that there is still hope for my device. ill try this as soon as possible and i will immediately feedback you for any update.. again, thank you very, very, much sir and more power to you....
Staine777 said:
Thank very much sir for this, its a relief for me that there is still hope for my device. ill try this as soon as possible and i will immediately feedback you for any update.. again, thank you very, very, much sir and more power to you....
Click to expand...
Click to collapse
Instead of sayin thx just press the thx button at the right down corner of the post P
Defenetly let me know how it goes, there are also good videos about flashing a rom with spflasftool
Sir i found it.
Brand: Alps
Model: XS-A891
CPU Model: MT6580