Hello @xda
I ran into some ussues lately with TWRP and M5 kernel made by @Myself5
Until last week I have been using M5-kernel with Validus ROM, and it has all been running smooth. I have been able to open TWRP during boot with volume keys and all was joy. Then I decided to try MultiROM and I got that working with the app.
This monday I decided to get rid of it and cleaned my phone.
Then the issues started. I replaced MultiROM TWRP with TWRP and flashed boot.img from validus zip. No problems entering recovery and I successfully flashed the zip and gapps for it. I used his latest version with M5 included. Booting into the ROM was not a issue and it all worked fine until I was trying to get into TWRP.
As I always do before I backup my phone, I shut it down. Then I booted it and tried to enter recovery, the purple light came on, but nothing happened when pressing any keys...
To enter the recovery i had to boot the ROM and reboot to recovery, witch I did not have to do before. I tried all possible solutions, in the end I decided to try with the kernel from a earlier Validus version, and guess what, it opened TWRP.
Is there someone that can tell me WTH I'm doing wrong??
I always do a
<fastboot flash recovery twrp.img and <fastboot flash boot boot.img
Related
Ok long story short i'm confused as to what's up with this device. I just picked it up and started messing with it. Looks like it has mako bootloader unlock and cwm 6x recovery installed. The only roms it can flash is cm12.1 and the factory ATT images correctly. I tried to update to the newer version of CWM or TWRP via fastboot and the flash takes but no recovery is present. Things i've tried =
Full factory reset via LGE970AT-01-V20j-310-410-MAR-08-2013 (this leaves me with no bootloader/fastboot/recovery) It boots but black screen on bootanimation.
tinybin (both options) only the altern will boot but. (have fastboot but no recovery.)
So long story... In stock firmware I can install freegee and unlock via mako but there will be no recovery if I choose TWRP and CWM won't install anything bt CM... I'm attempting to install Blisspop btw.
Any help would be great. Thank you
I was running the 8/3 update of Cyanogenmod 13 just fine on my L24. I downloaded the 8/13 nightly from the CM website and tried to flash it, but for some reason it returned error 7, which shouldn't happen because I already updated to EMUI4/MM firmware two weeks ago (as evidenced by me running the 8/3 version with no problems). However, when I then tried to boot back into system, the phone instead booted back into TWRP. Trying to boot into system in any way (from TWRP menu, through bootloader --> fastboot reboot, et cetera) just reboots the phone right into TWRP again. -_-
Now, I can access only TWRP and bootloader, but whenever I try to flash a .zip in TWRP it immediately reboots back into TWRP. I've tried reflashing TWRP (newest version and older versions), flashing the Cyanogenmod recovery for kiwi, factory resetting, and even reflashing the stock recovery and trying to return to stock EMUI. None of these have worked. (And yes, of course I've tried clearing cache/dalvik.)
At this point I'm just looking to actually boot into system...If anyone has any idea how I might be able to fix this, it would be great.
EDIT: to clarify, when I try to flash the ROM in TWRP, I get the following:
updating partition details
full selinux support is present
MTP enabled
and then an immediate reboot. This is very fast - I had to take a video of it and then freeze the frame to see what the message was.
Boot in fastboot and install your crap? Turn phone off connect to your PC hold Power and volume down until it boots.
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
radiobacter said:
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
Click to expand...
Click to collapse
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
clsA said:
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
Click to expand...
Click to collapse
Again, the issue is that I can't install any ROM through TWRP, because trying to instantly reboots the phone and brings me back into TWRP. I've tried reflashing TWRP, but it doesn't do anything.
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
radiobacter said:
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
Click to expand...
Click to collapse
The phone is known to be finicky about sd cards. Try formatting it with TWRP
Sent from my SM-N920T using Tapatalk
This is my version of TWRP built for the 2017 Moto G5S. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
Differences between upstream TWRP and my fork:
My original green theme
No SuperSU
No TWRP app
No HTC Dumlock cruft
Updated pigz compressor (slightly faster and more tolerant of corruption)
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
To permanently flash it:
Code:
fastboot flash recovery twrp.img
The download is available on the downloads tab.
XDA:DevDB Information
TWRP for Moto G5S, Tool/Utility for the Moto G5S
Contributors
squid2
Source Code: https://github.com/moto8937-twrp
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-17
Created 2017-11-05
Last Updated 2018-08-17
Squid TWRP 3.1.1-r3
Initial build for montana is up. I expect it to be fully functional, including encryption support. Special thanks to @lohanbarth for testing.
thank you for your work :good:
Hi,
i just flashed your TWRP. The flash was successful, after booting to recovery twrp came up just fine. I wiped /data to decrypt, then rebooted the phone... Now it seems either bootlooping or bricked.
(Of course i unlocked the bootloader before flashing)
The phone just shows the bootloader-screen (blue background, red M-Logo, white letters "powered by android") with a small text in the middle "bad key).
Nothing happens. I cant even shut it down. Holding the power button for 10 seconds seems to start a reboot (screen goes black) but the bootloader-screen immediately shows back up and stays. Theres nothing i can do, no adb/fastboot access either...
Any suggestions?
Edit1:
AH! Pressing VolDown + Power gets me to fastboot/recovery... Phew. Guess i flash the stock rom first before proceeding any further.
Edit2:
Succeeded, nice!
Hi,
I flashed this TWRP. After flashing I went to recovery mode. Format Data failed as /data unknown. Flashed stock ROM. Again flashed TWRP. This time it just bootloops into TWRP recovery. When I power off and ON again, it bootloops and goes into TWRP recovery again and again. Any idea what could be wrong? My guess is I screwed up partition table. But not sure.
Thanks
KS
I went through flashing stock ROM, TWRP once again. After flashing TWRP, I went to recovery repeatedly and did 'Format Data' every time. I flashed Magisk. System booted fine. I verified by power off/on several times. Seems to be working fine.
Thanks
KS
Thanks for your hard work at bringing TWRP to the MOTO G5s.
It took me a while to install it on my XT1797, as there was some strange message during boot which said
ID: Bad key
But after many many times bricking and unbricking, I am now finally rooted using Magisk.
Hope that we can see some custom Roms for this great device soon.
I tried it with XT1797, but I can not boot and flash twrp.
Is this twrp compatible with XT1797?
hello, your bootloader and unlock it?
did you enable USB debugging?
that you put the fastboot cmd?
Hi . Thx for You job . My phone stil a live But I have a question .
how about this one ? At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
FAFAŁ said:
Hi . Thx for You job . My phone stil a live But I have a question .
how about this one ? At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Click to expand...
Click to collapse
What is the question? For me it worked without such vertiy disable stuff. Simply unlock the bootloader, boot and/or flash TWRP, root your phone or do anything else. When TWRP asks to change /system, answer yes.
Root and TWRP. And a great phone.
Just need some Roms, pray that they will come!
Thank you!
janhieber said:
What is the question? For me it worked without such vertiy disable stuff. Simply unlock the bootloader, boot and/or flash TWRP, root your phone or do anything else. When TWRP asks to change /system, answer yes.
Click to expand...
Click to collapse
Ok .that's all super go to recovery end fire .Thanks
Hello, I compiled the twrp3.2 with the sources of squid2.
thank @squid2 for sources
twrp-montana-3.2.0-r1 > http://www.mediafire.com/file/4443oy6kwiyvm5g/twrp-montana-3.2.0-r1.img
Squid TWRP 3.2.0-r1
I've posted a new build of my TWRP with the latest changes from upstream. It brings better support for Oreo zips while still supporting older ones. It also has improvements to the reliability of backups.
squid2 said:
I've posted a new build of my TWRP with the latest changes from upstream. It brings better support for Oreo zips while still supporting older ones. It also has improvements to the reliability of backups.
Click to expand...
Click to collapse
Dear @squid2 please give some ROMs also
... please i know you are busy with work but it is just a request
Unable to Flash twrp recovery
After flashing oficial firmware, i am no longer able to flash twrp recovery, after each system reboot, i am back on stock recovery.
Does anyone know how to fix?
Flashed using: fastboot flash recovery twrp.img
Get a notification: bootloader file not signed or corrupt
dau999 said:
After flashing oficial firmware, i am no longer able to flash twrp recovery, after each system reboot, i am back on stock recovery.
Does anyone know how to fix?
Flashed using: fastboot flash recovery twrp.img
Get a notification: bootloader file not signed or corrupt
Click to expand...
Click to collapse
after the flash of the twrp you select good recovery in the bootloader?
lohanbarth said:
after the flash of the twrp you select good recovery in the bootloader?
Click to expand...
Click to collapse
Select good recovery in the bootloader??!!
Bootloader gives me a notification that the img is not signed or corrupt (squids one)
you tried to download it again and then try again
lohanbarth said:
you tried to download it again and then try again
Click to expand...
Click to collapse
I did, same error.
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
GGerniWhite said:
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
Click to expand...
Click to collapse
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
GGerniWhite said:
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
Click to expand...
Click to collapse
If you already have the ROM installed, use adb to flash TWRP and without booting flash Magisk and then boot to system. If you are on stock ROM, follow THIS.
For entering into TWRP, use the key combination of volume up + power buttons.
You can use the encryption compatible TWRP (search for it) instead of the official one.
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Do following, instead of flashing your recovery.
Use this method boot and flash Magisk. Reboot back to your system and install Flashify and install your choosen Recovery with it
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
in stock rom you need to flash magisk right after flashing twrp else it will get replaced by stock
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
What the post above says is correct. However, if you don't want Magisk, after flashing TWRP, reboot into recovery and then into system. You may retain TWRP. However, this doesn't work for everyone.
Hi all, I fixed the issue by completely wiping my phone via TWRP and clean flashing pixel experience ROM. After rebooting on pixel rom TWRP persists.
It appears that MIUI rom has something that keeps reverting it to stock MI-recovery.
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP once more. That's it! You have just overwritten the stock recovery and are now on TWRP!! Now you can reboot to system and TWRP will remain on your device. There's no need to flash Magisk etc if you want just TWRP and nothing else.
Rowdyy Ronnie said:
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP again. That's it! You have just overwritten the stock recovery and are now on TWRP!! There's no need to flash Magisk etc if you just want TWRP and nothing else.
Click to expand...
Click to collapse
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
jonske said:
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
Click to expand...
Click to collapse
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Rowdyy Ronnie said:
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Click to expand...
Click to collapse
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
jonske said:
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
Click to expand...
Click to collapse
How did you fix it?