How to backup without rooting in lenovo a6000
And also you can boot into cwm recovery without flashing ..
Lenovo A6000 was launched last month i.e., January and it is exclusively available on Flipkart with a price tag of Rs.6999. This device comes with some good specification at this price, which includes 5 inch HD display with 1280 x 720 pixels resolution, 1.2 GHz Qualcomm Snapdragon 410 MSM8916 Quad Core 64-bit processor, 1GB RAM, Adreno 306 GPU, 8GB internal storage with 32GB expansion slot, 8MP rear shooter and 2MP front facing camera. It is a Dual SIM mobile with 4G LTE support.
Install CWM Recovery and Root Lenovo A6000
Those who have this device and looking to get most out of it by rooting it and installing Custom Recovery like CWM Recovery, then this guide is for you, as we will show you how to install CWM Recovery and Root Lenovo A6000 in this tutorial.
Before you actually proceed to install CWM Recovery and Root Lenovo A6000, you must follow the below listed Pre-Requisites to prepare Lenovo A6000 for the installation and rooting process and also to avoid interruptions in between process
Enable USB Debugging on your device from Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times.
Charge your device to at least 75%, before you proceed, so as to make sure the device won’t shut down in between the process, otherwise it may brick your device.
Go to Settings > Security and enable Unknown Sources option.
Download and install the Lenovo USB Drivers on your PC.
Install minimal ADB and Fastboot drivers on your PC
Link below
Once you are all set , you can proceed to install CWM Recovery on Lenovo A6000. Once you have installed CWM Recovery you can proceed to Root Lenovo A6000.
DISCLAIMER
We should not be held liable or responsible in any manner for any damage occurred to Lenovo A6000. So understand the risk in installing CMW Recovery and Rooting Lenovo A6000, and proceed at your own risk.
Downloads:
CWM Recovery... http://d-h.st/oZmD
Rooting Package...http://d-h.st/sNGY
Minimal adb and fastboot
https://www.dropbox.com/s/ngtjk6b6qo6daw3/minimal_adb_fastboot_v1.1.3_setup.exe
Copy the Rooting Package to your device’s SD card. Make sure to copy at the root of SD card, but not inside any folder.
Copy the downloaded recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory.
Now connect your device to PC using OEM cable.
Open the C:\Program Files (x86)\Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.
Now in CMD type:
adb devices
If any device id or devices are shown in the above command then it represents that your device is connected successfully to PC.
Now type :
adb reboot Bootloader
This will reboot your device into Bootloader / Fastboot Mode.
Now type:
fastboot boot recovery.img
Then after it boots to recovery select backup
and then if u want to root ,download and flash root su zip and reboot ..
and if u want ota u can restore system using cwm backup
i tell u to boot directly cos u can go to stock recovery anytime and get ota..
the ota Checks recovery too thats y
PRESS THANX IF I HELPED
A6000 cm12
http://forum.xda-developers.com/showthread.php?t=3066218
Lenovo a6000 cm12 alpha
stay clean make it just one thread..... and please make final of cwm and root :good::good:
Arvind Balaji said:
A6000 cm12
http://forum.xda-developers.com/showthread.php?t=3066218
Lenovo a6000 cm12 alpha
Click to expand...
Click to collapse
Final of cwm???
Guys I need to ask one thing
My cwm cannot find recently pasted zip folders
So I am flashing all zips with help of ROM manager
this cwm recovery is not permanent, How To install cwm recovery permanently?
If u wanna flash cwm permanently u have to type
Fastboot flash recovery recovery.img
Instead of fastboot boot recovery.IMG
And plug out battery and long press vol Down and power simultaneously and click recovery then BAM!! U r in cwm recovery
Arvind Balaji said:
If u wanna flash cwm permanently u have to type
Fastboot flash recovery recovery.img
Instead of fastboot boot recovery.IMG
And plug out battery and long press vol Down and power simultaneously and click recovery then BAM!! U r in cwm recovery
Click to expand...
Click to collapse
Thanks, It's Working Perfectly
Arvind Balaji said:
How to backup without rooting in lenovo a6000
And also you can boot into cwm recovery without flashing ..
Lenovo A6000 was launched last month i.e., January and it is exclusively available on Flipkart with a price tag of Rs.6999. This device comes with some good specification at this price, which includes 5 inch HD display with 1280 x 720 pixels resolution, 1.2 GHz Qualcomm Snapdragon 410 MSM8916 Quad Core 64-bit processor, 1GB RAM, Adreno 306 GPU, 8GB internal storage with 32GB expansion slot, 8MP rear shooter and 2MP front facing camera. It is a Dual SIM mobile with 4G LTE support.
Install CWM Recovery and Root Lenovo A6000
Those who have this device and looking to get most out of it by rooting it and installing Custom Recovery like CWM Recovery, then this guide is for you, as we will show you how to install CWM Recovery and Root Lenovo A6000 in this tutorial.
Before you actually proceed to install CWM Recovery and Root Lenovo A6000, you must follow the below listed Pre-Requisites to prepare Lenovo A6000 for the installation and rooting process and also to avoid interruptions in between process
Enable USB Debugging on your device from Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times.
Charge your device to at least 75%, before you proceed, so as to make sure the device won’t shut down in between the process, otherwise it may brick your device.
Go to Settings > Security and enable Unknown Sources option.
Download and install the Lenovo USB Drivers on your PC.
Install minimal ADB and Fastboot drivers on your PC
Link below
Once you are all set , you can proceed to install CWM Recovery on Lenovo A6000. Once you have installed CWM Recovery you can proceed to Root Lenovo A6000.
DISCLAIMER
We should not be held liable or responsible in any manner for any damage occurred to Lenovo A6000. So understand the risk in installing CMW Recovery and Rooting Lenovo A6000, and proceed at your own risk.
Downloads:
CWM Recovery... http://d-h.st/oZmD
Rooting Package...http://d-h.st/sNGY
Minimal adb and fastboot
https://www.dropbox.com/s/ngtjk6b6qo6daw3/minimal_adb_fastboot_v1.1.3_setup.exe
Copy the Rooting Package to your device’s SD card. Make sure to copy at the root of SD card, but not inside any folder.
Copy the downloaded recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory.
Now connect your device to PC using OEM cable.
Open the C:\Program Files (x86)\Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.
Now in CMD type:
adb devices
If any device id or devices are shown in the above command then it represents that your device is connected successfully to PC.
Now type :
adb reboot Bootloader
This will reboot your device into Bootloader / Fastboot Mode.
Now type:
fastboot boot recovery.img
Then after it boots to recovery select backup
and then if u want to root ,download and flash root su zip and reboot ..
and if u want ota u can restore system using cwm backup
i tell u to boot directly cos u can go to stock recovery anytime and get ota..
the ota Checks recovery too thats y
PRESS THANX IF I HELPED
Click to expand...
Click to collapse
one small correction
if it says waiting for device for trying to get into fastboot
try:- adb reboot-bootloader
this should get you into fast boot
We will get lollipop update in future, but if we root it then we are not gonna get official lollipop update....
Is there any way that even after rooting we can get all the OTA Updates ??
rkg.narnaul said:
We will get lollipop update in future, but if we root it then we are not gonna get official lollipop update....
Is there any way that even after rooting we can get all the OTA Updates ??
Click to expand...
Click to collapse
Even after rooting you will get lolipop update but you should reflash your stock recovery
But after updating you eill not get root previeges
Arvind Balaji said:
Even after rooting you will get lolipop update but you should reflash your stock recovery
But after updating you eill not get root previeges
Click to expand...
Click to collapse
You mean if I root now there is not any kind of problem....
Suppose after rooting I want to update the ROM using OTA then I just need to flash the stock recovery and then I can easily update via OTA ??
Rooting will not affect the OTA Updates ??
---------- Post added at 02:29 PM ---------- Previous post was at 02:26 PM ----------
Bro I think after rooting I will not be able to get updates via OTA because rooted cell can not get updates through OTA, even if I flash the stock recovery I will not be able to get updates through OTA because my phone will still be rooted, flashing stock recovery will not unroot the phone.
Please guide me how to receive updates through OTA after rooting step by step, If you are sure of such a procedure..
rkg.narnaul said:
You mean if I root now there is not any kind of problem....
Suppose after rooting I want to update the ROM using OTA then I just need to flash the stock recovery and then I can easily update via OTA ??
Rooting will not affect the OTA Updates ??
---------- Post added at 02:29 PM ---------- Previous post was at 02:26 PM ----------
Bro I think after rooting I will not be able to get updates via OTA because rooted cell can not get updates through OTA, even if I flash the stock recovery I will not be able to get updates through OTA because my phone will still be rooted, flashing stock recovery will not unroot the phone.
Please guide me how to receive updates through OTA after rooting step by step, If you are sure of such a procedure..
Click to expand...
Click to collapse
Plz understand what i say
if you want ota updates you should be in stock recovery and flash the s032 zip i shared you
It will unroot your phone
Just do it you will get ota only if it is available
Tell me your firmware version
This method is no longer working after latest update
I received the latest A6000 update (Kraft-A6000_S034_150425) 2 days back and this rooting method is not working now.
Received 2-3 updates earlier and even though I have to redo the whole procedure after each update, I was able to root successfully each time...but it is not the case now
Any help would be appreciated.
Arvind Balaji said:
How to backup without rooting in lenovo a6000
And also you can boot into cwm recovery without flashing ..
Lenovo A6000 was launched last month i.e., January and it is exclusively available on Flipkart with a price tag of Rs.6999. This device comes with some good specification at this price, which includes 5 inch HD display with 1280 x 720 pixels resolution, 1.2 GHz Qualcomm Snapdragon 410 MSM8916 Quad Core 64-bit processor, 1GB RAM, Adreno 306 GPU, 8GB internal storage with 32GB expansion slot, 8MP rear shooter and 2MP front facing camera. It is a Dual SIM mobile with 4G LTE support.
Install CWM Recovery and Root Lenovo A6000
Those who have this device and looking to get most out of it by rooting it and installing Custom Recovery like CWM Recovery, then this guide is for you, as we will show you how to install CWM Recovery and Root Lenovo A6000 in this tutorial.
Before you actually proceed to install CWM Recovery and Root Lenovo A6000, you must follow the below listed Pre-Requisites to prepare Lenovo A6000 for the installation and rooting process and also to avoid interruptions in between process
Enable USB Debugging on your device from Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times.
Charge your device to at least 75%, before you proceed, so as to make sure the device won’t shut down in between the process, otherwise it may brick your device.
Go to Settings > Security and enable Unknown Sources option.
Download and install the Lenovo USB Drivers on your PC.
Install minimal ADB and Fastboot drivers on your PC
Link below
Once you are all set , you can proceed to install CWM Recovery on Lenovo A6000. Once you have installed CWM Recovery you can proceed to Root Lenovo A6000.
DISCLAIMER
We should not be held liable or responsible in any manner for any damage occurred to Lenovo A6000. So understand the risk in installing CMW Recovery and Rooting Lenovo A6000, and proceed at your own risk.
Downloads:
CWM Recovery... http://d-h.st/oZmD
Rooting Package...http://d-h.st/sNGY
Minimal adb and fastboot
https://www.dropbox.com/s/ngtjk6b6qo6daw3/minimal_adb_fastboot_v1.1.3_setup.exe
Copy the Rooting Package to your device’s SD card. Make sure to copy at the root of SD card, but not inside any folder.
Copy the downloaded recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory.
Now connect your device to PC using OEM cable.
Open the C:\Program Files (x86)\Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.
Now in CMD type:
adb devices
If any device id or devices are shown in the above command then it represents that your device is connected successfully to PC.
Now type :
adb reboot Bootloader
This will reboot your device into Bootloader / Fastboot Mode.
Now type:
fastboot boot recovery.img
Then after it boots to recovery select backup
and then if u want to root ,download and flash root su zip and reboot ..
and if u want ota u can restore system using cwm backup
i tell u to boot directly cos u can go to stock recovery anytime and get ota..
the ota Checks recovery too thats y
PRESS THANX IF I HELPED
Click to expand...
Click to collapse
amit_aks_007 said:
I received the latest A6000 update (Kraft-A6000_S034_150425) 2 days back and this rooting method is not working now.
Received 2-3 updates earlier and even though I have to redo the whole procedure after each update, I was able to root successfully each time...but it is not the case now
Any help would be appreciated.
Click to expand...
Click to collapse
I can root it
Guys download the stock ROM u shared in the other thread and update the phone.. I can root it with no problems....
And please tell which step u get stuck
I'll try to help
Signature failed
hey there . i tried to root my phone but. its telling me signature failed . error!!!
device info.
lenovo a6000
baseband- A6000_A_0001_150402
build no- kraft - a6000-s033-150402
Did u flash the root zip file with clockworkmod recovery??
amit_aks_007 said:
I received the latest A6000 update (Kraft-A6000_S034_150425) 2 days back and this rooting method is not working now.
Received 2-3 updates earlier and even though I have to redo the whole procedure after each update, I was able to root successfully each time...but it is not the case now
Any help would be appreciated.
Click to expand...
Click to collapse
Please don't quote the whole OP
Related
How to root micromax canvas 5, e481? Can't find a way to root it, tried various apps...
i've tried every method possible but i cannot find a way to root it ... One major problem is that this phone is not being recognized by adb ... When i type adb devices from the command prompt nothing shows up ... And i've spent a long time searching for adb drivers for this device but cannot find any ... Please do help ... Have tried all the one click apps ... None of them work ... It's a media tek processor running lollipop 5.1
The kernel number is 3.10.65+.
i have a terrible feeling that this is some kinda un-rootable device ...
Please help !
harmeetmanseta said:
i've tried every method possible but i cannot find a way to root it ... One major problem is that this phone is not being recognized by adb ... When i type adb devices from the command prompt nothing shows up ... And i've spent a long time searching for adb drivers for this device but cannot find any ... Please do help ... Have tried all the one click apps ... None of them work ... It's a media tek processor running lollipop 5.1
The kernel number is 3.10.65+.
i have a terrible feeling that this is some kinda un-rootable device ...
Please help !
Click to expand...
Click to collapse
Same here. Doing research on rooting Micromax e481 since last week but no go. I hope dev guys will make out the solution quickly.
Without root i am restricted to do lots of stuffs in my phone. So root is necessary.
Good news folks ? .... Here is the solution
forum.xda-developers.com/android/development/root-wiko-fever-t3242640/post63968770#post63968770
Wani Aamir said:
Good news folks .... Here is the solution
forum.xda-developers.com/android/development/root-wiko-fever-t3242640/post63968770#post63968770
Click to expand...
Click to collapse
Thank you very much for your time and efforts, but i am unable to perform the second step mentioned in the thread.
Can you tell me how to perform this step on Micromax E481?
1.2) Power on the device in the BOOTLOADER mode. Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
Have you unlocked the bootloader, if so flash the mentioned recovery through fastboot,command for flashing recovery, fastboot flash recovery, <recovery name >.img
Wani Aamir said:
Have you unlocked the bootloader, if so flash the mentioned recovery through fastboot,command for flashing recovery, fastboot flash recovery, <recovery name >.img
Click to expand...
Click to collapse
I have asked a very simple question that how to run a "command" in SP Flash Tools ?
Don't know, i used Minimal Adb & fastboot
Hi
I did below steps to root Micromax Canvas E481 but it failed.
1. enable OEM unlock, USB Debugging and reboot the platform in fastboot mode
2. #fastboot oem unlock -> Success
3. #fastboot reboot
4. Again set USB debugging and OEM Unlock
5. # Fastboot reboot bootloader
6. #fastboot flash recovery recovery-custom-wiko-fever.img
7. #fastboot reboot
8. Power off platform
9. Go to recovery mode using Vol up + power button
10 I get "No Command" on the screen
11. Press power button, I get in the recovery mode with below options on the screen
Android system recovery <3e>
ALPS.L1.MP3.V2.21_TINN06753.65U.G_P35
Volume down to move highlights;
Volume up to select
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wide data/factory reset
wipe cache partition
backup user data
restore user data
root integrity check
reboot to bootloader
power down
view recovery logs
12. Choose apply update from sdcard
unable to find BETA-SuperSU-v2.52.zip under /sdcard tree
13. Tried to use adb side load and it gave below error
#adb sideload BETA-SuperSU-v2.52.zip
loading: 'BETA-SuperSU-v2.52.zip'
error: device not found
I have few questions
Is the "recovery-custom-wiko-fever.img" compatible with E481
how do we confirm OEM unlocking on micromax canvas E481?
Thank You!
MJ
---------- Post added at 06:54 AM ---------- Previous post was at 06:08 AM ----------
I placed the external uSD card and tried to install super su.
I got below error messages
--Install /sdcard/UPDATE-SuperSU-v2.46.zip ...
Opening update package
Installation aborted.
--Install /sdcard/BETA-SuperSU-v2.52.zip ...
Opening update package
Installation aborted.
Thank you!
MJ
Are u sure u have unlocked the bl? U have to use vol+ button to proceed once ur command is accepted in fastboot, if it is unlocked ur phones data will be erased, one more thing for ur question,Yes the recovery supports e481,flashed xposed through this,,, After flashing the recovery dont reboot the phone go directly into recovery mode.... Hope this will help
Will that prevent OTA update ?
Will unlocking bootloader and installing recovery prevent OTA update ?
E481 is said to be getting Marshmallow, should i root device with this method anyway ?
Well, i don't trust micromax that much, if they did update it, it is not gonna happen before 3-4 months, till then custom roms will be out,if you are OK without root then wait
ZiaR said:
Same here. Doing research on rooting Micromax e481 since last week but no go. I hope dev guys will make out the solution quickly.
Without root i am restricted to do lots of stuffs in my phone. So root is necessary.
Click to expand...
Click to collapse
don't try to root it gonna be soft brick
---------- Post added at 02:57 PM ---------- Previous post was at 02:53 PM ----------
harmeetmanseta said:
i've tried every method possible but i cannot find a way to root it ... One major problem is that this phone is not being recognized by adb ... When i type adb devices from the command prompt nothing shows up ... And i've spent a long time searching for adb drivers for this device but cannot find any ... Please do help ... Have tried all the one click apps ... None of them work ... It's a media tek processor running lollipop 5.1
The kernel number is 3.10.65+.
i have a terrible feeling that this is some kinda un-rootable device ...
Please help !
Click to expand...
Click to collapse
download htc dream driver it vl help u so much
Easy n Safe
Have a look,,it is very easy n safe to root micromax canvas 5, i am rooted with xposed fully working
http://forum.xda-developers.com/showthread.php?t=
Have a look,,it is very easy n safe to root micromax canvas 5, i am rooted with xposed fully working
http://forum.xda-developers.com/showthread.php?t=
Wani Aamir said:
Have a look,,it is very easy n safe to root micromax canvas 5, i am rooted with xposed fully working
http://forum.xda-developers.com/showthread.php?t=
Click to expand...
Click to collapse
Great Job ! Could You please one more time list out the method You used to root - i'm not the most tech savvy guy so if You could please detail it a bit - Really appreciate Your help - Thank You !
Please tell me in details please please...
Post is removed.
Mr. Amir the link you provided doesn't have any post or the post have been removed..
Can you tell me what was the solution , how you rooted micromax canvas 5 E481?
Eagerly waiting for your reply..
Thank you
Dude look here,you will find the solution press thanks if it helps forum.xda-developers.com/showpost.php?p=63803008&postcount=5
Guide to rooting infocus Epic 1 (for windows) for build 00.
This method is only tested on build 00IN_1_360 only. If you are on the older build, first update your phone to build 00IN_1_360 then proceed. Check Build number in settings->about phone.
Proceed at your own risk, I will not be help responsible if your phone bricks, Your warranty will be void after this. Also all phone data will be lost including data on internal memory like photos, etc after these steps so take necessary backups.
Prepare your system
1. Extract and Install MTK Driver Auto Installer v5.1632 (google it)
2. Install Phone F Driver (from phone CD-emulation/driver folder upon connecting your phone)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
4. Download latest SuperSU flashable zip file from here
5. Download twrp-3.0.3-0-epic1-noveritynoencrypt.zip from here, extract in the folder where you have installed adb and fastboot
6. Download noencryptnoverty_boot.zip from attachments and extract to folder where you have installed adb and fastboot
Steps to root:
1. Enable Developer options in phone settings (goto phone settings -> about phone -> tap build number 7 times)
1a. Enable OEM unlock
1b. Enable USB Debugging
2. Connect phone to computer, wait for hardware to auto install
3. open cmd as administrator
3a. goto the directory where adb and fastboot is installed
4. type command:
4a.
adb reboot bootloader
(Wait for phone to come in fastboot)
4b.
fastboot OEM unlock
(press vol up key on phone)
4c.
fastboot flash boot noveritynoencrypt.img
4d.
fastboot flash recovery recovery.img
4e.
fastboot reboot
You will get an phone orange state prompt, do not worry its normal. Phone may reboot once or twice. Wait for phone to normal bootup.
5. open cmd and type command
5e.
adb reboot recovery
Phone will reboot in recovery i.e. TWRP
6. Tap on Keep system read-only. Do not swipe to allow modifications. If TWRP asks for password, don't enter any press back.
7a. Tap Wipe -> Format Data. Come out to main menu, then click reboot and then recovery to restart recovery.
7b. Tap Wipe -> Advanced Wipe -> Select Dalvik /ART, Cache, Data and Internal Storage. This is important step, as these partitions are encrypted at the moment, so if you flash anything the phone rom may corrupt.
8. Come out and then Tap Reboot -> System
9. Once the phone is back, turn off the phone. Then power on with vol up key pressed to boot into TWRP
10. Tap Backup, select all partitions, select phone storage (SD card preferred) and take backup (optional step but highly recommended )
11. Now tap install, goto the location where you had copied SuperSU zip file, flash it.
Congratulations your Phone is rooted. Reboot, see SuperSU icon in app drawer.
Many thanks to @mujammil786 for providing stock files and @Bornstud for testing twrp builds
Special thanks to our devs @DespairFactor for modifying boot.img to disable Encryption and Verity and @kirito9 for creating TWRP for our device. Without their help, it wouldn’t have been possible.
MODS
(Take backup of your ROM/Data before applying any mods)
Viper4Android (Advanced Sound Enhancement)
Hugely Customizable and better than MaxxAudio or Dolby Atmos IMHO
Now working on our device Infocus Epic 1
Need to flash the 2 attached files via TWRP before installing the official app from HERE. Although latest version v2.5.0.5 also works, but i personally prefer v2.4.0.1 (busybox required)
(Note the attached files are not my work, they are picked from here and here. Say thanks to original contributors.)
Good V4A profile: HERE
Extract it to ViPER4Android Directory in internal Storage
Xposed
Needs no introduction. Every android enthusiast should know what it is. Anyway if you are new, xposed opens limitless ROM customization(s) and useful features via 100s of its modules.
Installation:
1. Flash framework xposed-v87-sdk23-arm64.zip from HERE via TWRP. Reboot after installation will take long time (~10 - 15 minutes)
2. Install app XposedInstaller_3.1.1.apk from HERE
Restoring phone back through SUT
If you are stuck somewhere or want to restore the phone factory state (like for when giving to repair), you can restore the phone back via SUT
Link for build 1280: https://firmwarefile.com/infocus-epic-1
Also dont turn off your phone as suggested in sut readme file. It only works when your phone is on. Check below vid for more instructions
https://m.youtube.com/watch?v=eV_cId5fC9E
Reduce battery consumption & phone temperature
Found an interesting thread, mod works on our device also
https://forum.xda-developers.com/red...tings-t3687897
I have tried both flavor 1 and flavor 2 over the past week. Results with flavor 1 were positive in the beginning but for some reason standby drain shot up after 3-4 days, not sure what the reason was.
On flavor 2, I have just disabled MTK perfservice by setting
ro.mtk_perfservice_support = 0 in build.prop
Yes this limits the a72 core to 1.5ghz, but i have noticed phone is heating less and need for charging the phone has reduced. I haven't noticed much drop in performance either, but that might be as I don't use intensive apps.
Mafioso said:
I've managed to unpack nb0 file through a688 tool, however its only successful in unpacking few files before it crashes with some array size error, but the good thing is I was able to extract the scatter file for this phone before it happened.
Anyway, I was hopeful that I would be able to make backup of Stock ROM and Recovery through it via spflash tools however as it turns out, spflash tool is giving me error while doing readback BROM ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
Not sure how to fix it, i've updated my drivers as well as i'm using latest version of spflash tool (SP_Flash_Tool_v5.1628_Win)
Attaching scatter file.
Click to expand...
Click to collapse
From where uve downloaded the stock firmware
Romeotamizh said:
From where uve downloaded the stock firmware
Click to expand...
Click to collapse
http://firmwarefile.com/infocus-epic-1
Mafioso said:
http://firmwarefile.com/infocus-epic-1
Click to expand...
Click to collapse
Oh
---------- Post added at 08:17 AM ---------- Previous post was at 08:17 AM ----------
Romeotamizh said:
Oh
Click to expand...
Click to collapse
Look in other sites bro for img files
Romeotamizh said:
Oh
---------- Post added at 08:17 AM ---------- Previous post was at 08:17 AM ----------
Look in other sites bro for img files
Click to expand...
Click to collapse
Hmm yaa, but at the moment no sites with for .img file for this phone. All sites point to this image only. Let's hope somebody posts. Thanks!
Mafioso said:
Hmm yaa, but at the moment no sites with for .img file for this phone. All sites point to this image only. Let's hope somebody posts. Thanks!
Click to expand...
Click to collapse
Ooh bro I'm happy to help but seriously i Duno about these kind of extensions hope u understand
Mafioso said:
I'm trying to root Infocus Epic 1, its a good budget phone with decent specs. Availability is only in India, not sure other regions. Anyway I'm having hard time to root it, since not much support is available. But so far, I have tried below things:
1. Tried to root with Kingroot, doesn't work .Probably because it is very new version of Marshmallow with Oct'16 patch level and kernel dated in dec 16.
2. Tried to generate scatter file via MTK Droid tool v2.5.3, after enable USB debugging in phone. The phone get detected in the tool, however create scatter file option in block map is disabled I've read somewhere, it might be due to MTK6797 (Helios x20) is quite new and is not yet fully supported by tool yet. Not sure if its true though. But if I can generate scatter file, I can extract phone's stock recovery via SPFlash tool readback to try a hand at porting twrp/cwm with some help..
3. Downloaded stock Infocus Epic 1 firmware in hope for recovering stock recovery.img or MTK scatter file, however on unpacking the firmware package, I found it contains unknown image file of nb0 extension which is it to be flashed via SUT Tool. Not sure how to unpack this file
Any more ideas, how can i atleast start with my quest to root/put custom recovery on this phone ? @Romeotamizh Pls help.
Click to expand...
Click to collapse
I can give u stock recovery of epic 1..
mujammil786 said:
I can give u stock recovery of epic 1..
Click to expand...
Click to collapse
how bro, are you able to get it via SPFlash tool readback option or are you able to unpack the nb0 file ?
Anyway you should post it here, somebody else might pick it up and build twrp for it. At the moment, I'm stuck with SPFlash tool unable to readback my phone as stated above , doubt i would be able to flash anything to test
Mafioso said:
how bro, are you able to get it via SPFlash tool readback option or are you able to unpack the nb0 file ?
Anyway you should post it here, somebody else might pick it up and build twrp for it. At the moment, I'm stuck with SPFlash tool unable to readback my phone as stated above , doubt i would be able to flash anything to test
Click to expand...
Click to collapse
I was able to extract it from last update zip
---------- Post added at 04:45 PM ---------- Previous post was at 04:33 PM ----------
Epic 1 stock recovery
https://drive.google.com/file/d/0B4FNo4vddleCNmpwcS1hS3FLam8/view?usp=drivesdk
mujammil786 said:
I was able to extract it from last update zip
Click to expand...
Click to collapse
ok I see, please post it here. I can update it in the first post. Might be useful for anyone willing to develop for this phone.
Also did you try to read-back the phone via SPFlash tool ? I'm running into issues, but maybe i'm not doing something correctly. Might be you will have better luck.
Mafioso said:
ok I see, please post it here. I can update it in the first post. Might be useful for anyone willing to develop for this phone.
Also did you try to read-back the phone via SPFlash tool ? I'm running into issues, but maybe i'm not doing something correctly. Might be you will have better luck.
Click to expand...
Click to collapse
Well i tried but i got ctrl device error ,btw i have uploaded stock recovery
mujammil786 said:
Well i tried but i got ctrl device error ,btw i have uploaded stock recovery
Click to expand...
Click to collapse
thanks, updated first post.
Mafioso said:
thanks, updated first post.
Click to expand...
Click to collapse
Thanks let's hope for best
I like this phone and the only thing lacking is Root, Hope someone will do it
I hope so too. However, it seems its not that straight forward anymore i.e. communicating with SPFlash tool on newer MTK chipsets. I was going through guides for LeTV x620 (also with MT6797), not sure but it seems they require authentication file now for the process, which might not be available for our phone.
I already tried all the other download agents like DA_PL.bin, DA_PL_High.bin, DA_BR.bin in flash tool through which this LeTV is able to communicate, it's same error for us with all.
Also other curious thing, I was unable to run any fastboot commands on this phone. The phone gets detected in fastboot when put in fastboot mode (vol - + power) i.e. I get output on fastboot devices.
However If i try to run any commands like fastboot oem get-bootinfo or fastboot oem device-info I get error message remote command unknown
Mafioso said:
I hope so too. However, it seems its not that straight forward anymore i.e. communicating with SPFlash tool on newer MTK chipsets. I was going through guides for LeTV x620 (also with MT6797), not sure but it seems they require authentication file now for the process, which might not be available for our phone.
I already tried all the other download agents like DA_PL.bin, DA_PL_High.bin, DA_BR.bin in flash tool through which this LeTV is able to communicate, it's same error for us with all.
Also other curious thing, I was unable to run any fastboot commands on this phone. The phone gets detected in fastboot when put in fastboot mode (vol - + power) i.e. I get output on fastboot devices.
However If i try to run any commands like fastboot oem get-bootinfo or fastboot oem device-info I get error message remote command unknown
Click to expand...
Click to collapse
My device does not get detect in fastboot can u show me screen shot of command u are trying....
mujammil786 said:
My device does not get detect in fastboot can u show me screen shot of command u are trying....
Click to expand...
Click to collapse
If it's not detected maybe its related to your drivers. I've installed the following drivers
1. Try installing the Phone F Driver (from phone CD-emulation upon connecting)
2. MTK Driver Auto Installer v5.1632.00 (you can get from needrom)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
Run cmd as administrator:
adb reboot bootloader
When phone reboots in fastboot mode
fastboot devices
You should see your phone being detected from above.
Mafioso said:
If it's not detected maybe its related to your drivers. I've installed the following drivers
1. Try installing the Phone F Driver (from phone CD-emulation upon connecting)
2. MTK Driver Auto Installer v5.1632.00 (you can get from needrom)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
Run cmd as administrator:
adb reboot bootloader
When phone reboots in fastboot mode
fastboot devices
You should see your phone being detected from above.
Click to expand...
Click to collapse
Ok will try thanx
bootloder get unlocked and locked too
ok so phone get detected in fastboot mode:victory: .was able to lock and unlock boot loader but without custom recovery it is no useful for us.
unlocked bootloader.
tried flashing Vernee_Apollo_Lite_P6(same spec. as epic 1) twrp recovery.
flashing done but after flashing phone refused to boot.
flashed stock recovery from update zip.
locked bootloader.
phone booted but erased internal memory after boot.
---------- Post added at 11:47 AM ---------- Previous post was at 11:44 AM ----------
do you know any guide for making twrp and i think phone will not boot if it detect any change in system partition i think
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging your phone (DO NOT CHEAT PLZ)
ps:when you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i PORT my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4- place the new ported recovery.img in the adb
installation folder ( c:\platform-tools-latest-windows\platform-tools )
5-your device has to be in USB MTP mode
6-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command- adb devices
-if the device is detected a serial number apears
command- adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command- fastboot devices
-the device displays the serial number again
command- fastboot flash recovery recovery.img
- if all went well it will say successful
command- fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working (My Model - Selecline/Auchan s6s4in3g)
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tools, a great ty to them
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed by the installation of the magisk15.3.zip and voila twrp+root
Here is a Ready twrp 3.1.1-0 recovery for SELECLINE/AUCHAN S6S4IN3G
(WARNING)do not flash it on any other brand or model IM NOT TO BLAME
Enjoy https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
step 1 - here is a tutorial on how to unpack the rom/firmware and get the stock recovery.img https://forum.hovatek.com/thread-6236.html
ps:in the tutorial he is using na older version of the tool ,the newer versions looks exactly the same as the SPD_Upgrade_Tool_R4.0.0001
step 2 - here is a vídeo tutorial on how to use the twrp porter , it modifies your stock recovery to boot twrp https://forum.hovatek.com/thread-21669.html#.Wlcd9W4qhkE.facebook
step 3 - how to properly install android studio (aka ADB ) vídeo tutorial https://www.youtube.com/watch?v=0ccUcPR2Mko
PS:all credit bellongs to the wonderfull ppl that created these fine android tools thank them/donate to them if you can
Thank you for this! Followed your instructions and tweaked it a little bit. Made my own TWRP and finally my I root(ed?) my lesser known phone. My phone is rooted and I learned something. Again, thank you so much!!!
florain03 said:
Thank you for this! Followed your instructions and tweaked it a little bit. Made my own TWRP and finally my I root(ed?) my lesser known phone. My phone is rooted and I learned something. Again, thank you so much!!!
Click to expand...
Click to collapse
its awsome when one understands it and can do it himself, enjoy your root :good:
In the Hovatek application, you can cheat your TWRP version. I don't know if it's working on other devices instead of using a lollipop version you can use Marshmallow version.
phonedriller said:
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging your phone (DO NOT CHEAT PLZ)
ps:when you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i PORT my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4- place the new ported recovery.img in the adb
installation folder ( c:\platform-tools-latest-windows\platform-tools )
5-your device has to be in USB MTP mode
6-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command- adb devices
-if the device is detected a serial number apears
command- adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command- fastboot devices
-the device displays the serial number again
command- fastboot flash recovery recovery.img
- if all went well it will say successful
command- fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working (My Model - Selecline/Auchan s6s4in3g)
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tools, a great ty to them
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed by the installation of the magisk15.3.zip and voila twrp+root
Here is a Ready twrp 3.1.1-0 recovery for SELECLINE/AUCHAN S6S4IN3G
(WARNING)do not flash it on any other brand or model IM NOT TO BLAME
Enjoy https://drive.google.com/file/d/1xiTuMA-8bGgY0wuulpljVawNWXrujx0F/view?usp=sharing
Click to expand...
Click to collapse
Hey, do you still have this recovery? I had this phone lying around and wanted to mess around with it, thanks in advance
here you go .
hope it helps - https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
phonedriller said:
hope it helps - https://drive.google.com/file/d/1n2crfK7qkEc0G5ZjsUQRD02YMNb_MLGw/view?usp=sharing
Click to expand...
Click to collapse
Thanks so much man, I've been pulling my hair trying to figure how to root this thing. You're the best. Do you know if there are any roms for it? maybe ported?
Thank you so much man, I can confirm this works with myphone a5!!!!
A different phone but same chip.
i have no image in the recovery, butyou can access it by adb anyway following this thread:
i have magisk now time to unninstall gapps!!!!
fastboot doesn't work to me anyway, I don't know why but it is the truth. may u can help me?
So many thanks for you work! I'd use your TWRP as base and ported it to the Wiko Sunny 2. The only problem is that touch input doesn't work well, it receives touches all the time.
I have an E504 with android 8.1.0 go edition, I accidentally deleted family photos and I need to recover them, for that I need to root the cell phone, you can do it or do you know how I can do it or who does it?
facamasi said:
I have an E504 with android 8.1.0 go edition, I accidentally deleted family photos and I need to recover them, for that I need to root the cell phone, you can do it or do you know how I can do it or who does it?
Click to expand...
Click to collapse
1. Flash TWRP what is at 100% suitable to your phone
2. Download SuperSU
3. Flash SuperSU by means of TWRP
0
Doing this quick update because today, when trying to root my phone, bricked it several times and lost all app info
If you are using android 7.11, this guide works fine: https://forum.xda-developers.com/zenfone-3-zoom/how-to/how-to-root-zenfone-3-zoom-ze553kl-t3622256
If on android 8, SuperSU will brick your phone. Use Magisk instead:
- enable usb debug mode on your phone
- unlock bootloader
- plug phone into your computer
on your pc
- Download fastboot and adb:
* Windows: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
* macos: https://dl.google.com/android/repository/platform-tools-latest-darwin.zip
* linux: https://dl.google.com/android/repository/platform-tools-latest-linux.zip
- download the latest Magisk unlock script from https://github.com/topjohnwu/Magisk/releases and copy it to a MicroSD or USB that you can attach to your phone. Look for Magisk, not Magisk Manager
- download twrp v 3.1.0-0-Z01H-20170408: https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w?E81jQTCD (this is from https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w, as described in the old root guide using twrp + supersu. It is supposed to be safe)
- `adb reboot bootloader`
- `fastboot flash recovery <path to twrp image downloaded>`
- `fastboot reboot`
Right now, you should probably backup your phone.
back on your phone:
- before booting, press volume up on the bootloader, there, select Recovery. Using fastboot to reboot into recovery might cause the stock recovery image to reflash
- if prompted to enable system modifications, allow it.
- If prompted to decrypt your data in TWRP, use the PIN you setup. If it doesn't work, I can't guarantee you won't brick our phone. Feeling brave enough? In case of brick keep reading, it is easy to restore your phone to stock Android 8 using official firmware.
- press install, choose the device attached to your phone that has Magisk-xxx.zip and select it
- flash the image and it should be OK
In case of brick or unsuccessful flash from SuperSU and without backup:
- Don't panic, like I did today
- download the latest firmware from Asus: https://www.asus.com/us/Phone/ZenFone-3-Zoom-ZE553KL/HelpDesk_BIOS/
- follow this guide: https://forum.xda-developers.com/zenfone-3-zoom/how-to/manually-update-to-7-11-t3815703
- when the phone reboots, boot into recovery
- enable ADB sideload
- on your pc: `adb sideload <path to newest firmare>`
- now follow the root guide above before starting your phone
- ???
- profit
Note: commands using adb and fastboot assume you have put the contents from the downloaded platform tools in your PATH, else execute them from the directory in which they were extracted, for instance, on linux:
- `cd /home/$USER/Downloads`
- `unzip platform-tools-latest-linux.zip`
- `cd platform-tools`
- `./adb devices`
Bricked my phone.
in which step?
You should have access to fastboot, try the downgrade tutorial and install android 7 then imediately flash the latest image from ASUS
gchamon said:
in which step?
You should have access to fastboot, try the downgrade tutorial and install android 7 then imediately flash the latest image from ASUS
Click to expand...
Click to collapse
After the magisk install. It logged some "can't mount partition" errors, I tried to wipe, but do not worked.
It got stucked on Asus logo.
I did the unbrick tutorial.
This is strange. Magisk is supposed to patch the boot image and install its app (by the way, if you update magisk using the app, phone enters bootloop)
Anyway, I have encountered myself many problems when installing, but nothing like this. Bootloops and corruption message on bootloader yes, but I can't seem to recall anything about partitions not being mounted. If installing stock recovery image, boot image and system doesn't do the trick, in my experience it is either bad partitioning, although unlikely, because those procedures doesn't repartition anything, or bad internal storage.
But just to be sure, you should reflash stock 7.1 image (recovery, boot and system) with fastboot, enter stock recovery and wipe cache/factory reset. If your phone is physically healthy, this should work
anonymousbsb said:
After the magisk install. It logged some "can't mount partition" errors, I tried to wipe, but do not worked.
It got stucked on Asus logo.
I did the unbrick tutorial.
Click to expand...
Click to collapse
Try to use twrp-3.2.3-0-Z01H-20181014, i faced the same issue and fixed by flash it
Enrico06 said:
Try to use twrp-3.2.3-0-Z01H-20181014, i faced the same issue and fixed by flash it
Click to expand...
Click to collapse
Cool, if this fixes the issue I will update the guide with this info
bro pls give an unofficial process to unlock this device because official unlock tool not working it shows "unknown network error".
kingairtel08 said:
bro pls give an unofficial process to unlock this device because official unlock tool not working it shows "unknown network error".
Click to expand...
Click to collapse
Downgrade to 7.1.1 and try it again.
Already tried on 7.1.1 lot of times same error shows.
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
normal. please wait 15min max
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
I can't really help you there. This guide is supposed to work for those who are able to unlock bootloader using official asus tools. Never heard of unofficial unlock methods. It is possible that you have a hardware problem if you use those tools and they just don't work.
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
Have you used the latest official unlocking tool? I see there's a July 2019 version available.
If you are on an older version of Android (not Oreo) are you presently still getting OTA update prompts?
I tried this tool but no result.
is it possible to root ZE553KL without loosing user application's data? I have unrooted device, wanted to migrate telegram secret chats to new phone. it is doable but with rooted smartphone only. if rooting process is destructive I cannot migrate. if rooting is doable with preserving installed applications along with their data then there is a hope for successful migration.
does this method look promising or it is just fake method?
Asus Zenfone 3 Zoom ZE553KL root using Magisk [No need TWRP Recovery
How to root Asus Zenfone 3 Zoom ZE553KL with Magisk [no need TWRP recovery, easy method to rood your Android device.
www.mobilewithdrivers.com
Hello everyone hope you are all keeping well.
Since I believe that many of you don't know about this, I've decided to share the steps I've done in order to root the OP 11R ( ACE 2 )
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!
1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
adb devices
adb reboot bootloader
(so your phone will reboot into fastboot mode)
fastboot flashing unlock
(device should now unlock)
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)
2 - Download OP 11R stock boot.img that you may find later on this post, that matches your current build.
Copy the boot.img to your devices internal memory
Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)
Indian Boot.img A_0.8 - download
3 - Download latest Magisk Manager from HERE and install it on your phone
4 - Open Magisk Manager App and press:
Install
Select and Patch a File
Browse to the path where you saved stock boot.img and select it
Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img
5 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)
6 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)
adb reboot bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
7 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!
8 - Enjoy!
All credits goes to topjohnwu and his incredible work with Magisk.
Why title says NORD 2T?
firoz3321 said:
Why title says NORD 2T?
Click to expand...
Click to collapse
MB ... typo
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
firoz3321 said:
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
Click to expand...
Click to collapse
Sorry but there is no msm tool available for new OnePlus devices. + You can use Fastboot enhance tool from github to recover softbrick , magisk is always recommended for rooting because of ease of steps and simple to use
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
saifsohel said:
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
Click to expand...
Click to collapse
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
shiki_senpai said:
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
Click to expand...
Click to collapse
Then remember to take a backup of the boot before rebooting. I messed up big time.
Thanks for the detailed information man. Can I know if bootloader unlock decreases widevine L1 to L3? As this was case with my OP6