Hello,
After trying unsuccessfully to update my tab from 3.2 to 4.0 I get stuck with well know message "firmware upgrade encountered an issue". Well, after trying a couple of tutorials (all of them using odin) I always hit the same problem :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> boot.img
I can`t get passed throw the boot.img step. Anyone had a similar issue with that and may share some ideas with me ? Thanks
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
hsr38 said:
Hello,
After trying unsuccessfully to update my tab from 3.2 to 4.0 I get stuck with well know message "firmware upgrade encountered an issue". Well, after trying a couple of tutorials (all of them using odin) I always hit the same problem :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> boot.img
I can`t get passed throw the boot.img step. Anyone had a similar issue with that and may share some ideas with me ? Thanks
Click to expand...
Click to collapse
Try using Odin 1.87 and/or make sure Odin runs as administrator.
If that fails then it could be a corrupt download so try downloading again.
Sent from my Nexus 7 using XDA Free mobile app
Related
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I can't help, but I have a note for you:
I9100 is a different model from your I9100G
So you wasn't supposed to install I9100 roms over your I9100G
you should Install only the roms related to your model.
Sent from my GT-I9100G using Tapatalk
Hey dude, I found something that likely can help you,
check this link:
http://forum.xda-developers.com/showthread.php?p=21471558
Sent from my GT-I9100G using Tapatalk
Don't panic. You can boot into Download Mode and odin recognizes your phone.
You are not bricked.
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I encountered this things once. i check and found out that i did not insert my simcard. then after inserting it i can boot normally. so you better check if the simcard is there
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
loveshakeh said:
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
Click to expand...
Click to collapse
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
it gives this error in both roms :/
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
i again tried it gives cache error again
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
Your phone boots?
testadeferro said:
Your phone boots?
Click to expand...
Click to collapse
when i press power button on it say firmware encountered an error bla bla stuff
when i press power + volume up + menu button nothing happens
when i press power + volume down+ menu button odin recovery mode appears with andriod little green robot downloading do not turn off target
above that its written product name : gt i9100 , custom binary download 28 counts and current binary = custom
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
testadeferro said:
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed the steps from the thread link u given didnt worked but the custom binary changes from custom to samsung
Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
I would try another cord or USB port. If you're on a desktop, try one in the back.
eric303 said:
Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
Click to expand...
Click to collapse
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hexitnow said:
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
thanks, but i'm not trying to flash a custom recovery, i'm just trying to flash the stock image back on. I'll look for a stock me7 file and see what happens and report back.
I Tried the ME7 file like you suggested, still same thing
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats a different error. Could of been a corrupted download. Might have to download it again, after its done I would verify the md5 to make sure you got a good download.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Hi,
So I am having trouble downgrading my Samsung Galaxy S6 (SM-G920V) from Marshmallow 6.0.2 to Lollipop 5.0.2 so that I can run a Ping Pong Root on it. The trouble is coming from Odin when I try to flash my phone. It either gets stuck showing the code below and never moves on, or progresses past this and says that it has failed. My phone is definitely not bricked as I was tricked into thinking that the downgrade worked only to see that I just reloaded my same firmware after restoring the factory data minutes earlier. I am trying to flash it with SM-G920VVRU1AOE2 which I got from SamMobile.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920VVRU1AOE2_G920VVZW1AOE2_G920VVRU1AOE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I either get the result shown above, or the result shown below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried restarting my computer and rerunning the USB Drivers, and 3 different formats of Odin (3.11.1, 3.10.07, and 3.10.06).
Does anybody have any idea what might be going wrong and how I can fix it so that I can get my phone working again?
Thanks.
I'm trying to install Philz Touch or TWRP on my Galaxy S3(GT-i9300) using Odin(I have tried using Odin 1.85, 3.09, 3.10.7, and 1.3)
I'am using the motherboard's USB ports.
But everytime it stops at the "Get PIT for mapping.." step...
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
Click to expand...
Click to collapse
(That log above is from Odin 1.85)
Can anyone help me? I'm trying to do this for weeks...
Thanks in advance.