[Q&A] (Rooted)(Guide)(Noobs) LGMS395 AKA LG Optimus F60 - Android Q&A, Help & Troubleshooting

Q&A for (Rooted)(Guide)(Noobs) LGMS395 AKA LG Optimus F60
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Rooted)(Guide)(Noobs) LGMS395 AKA LG Optimus F60. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

command prompt appears then cuts off
When I open file the command prompt window pops up for like a sec then cuts off.
It does that everytime I open it.

Does this work with Linux?
I just want to know if there's any way this could work with Xubuntu 12.04L LTS.

I'm stock on root process!
"You should see something happening and not a return of a blank command. Once it's finished pull the battery and boot up your device is rooted"
I did everything. Step by Step, but as your thread said: "You should see something happening and not a return of a blank command. Once it's finished pull the battery and boot up your device is rooted"
My phone show 0%
User B50
rooted (red color)ur
I wait, and wait, and wait, up to an hour. and my computer do not show nothing, neither my phone, it do not show the percentage completed, and on my computer when I press enter to execute the command, just jump to the next line and do nothing. Please help to continue with the process.
Postdata:
I run the process complete Step by Step again, and Now is works. My phone is UNLOCK! ROOTED! YeaaH!

thanks!
It work for me. thanks

problems getting root to take (lg optimus f60 metro pcs)
ok so I have gone through the steps to root my phone at least 30 times over the last month. everything goes just as it should and according to the instructions right up until the very end. Once I complete step 5 with my phone in download mode, NOTHING HAPPENS. . .I paste the script into my command window and hit enter and the only thing that happens is that on the next line of the command window there is a "_" that just blinks infinitely. I have let it stay for hours before finally removing my battery and nothing I do seems to work, The process seems so simple that I cant imagine what I could be doing wrong. someone please help me through this as I desperately want to get this phone rooted
EDit---
So I just found another thread on this forum with a solution that worked seamless for me. I used a program called DP Root. Just do a search on dp root and it will be easy to find. . . worked awesome!!!

I used king root and it worked well

Related

[Q] Huawei Ascend Q Root

Okay, So I've been looking since August for a rooting tutorial for this phone and I've had zero luck.
I've attempted nearly every simple method of rooting (Gingerbreak, Superoneclick, etc) and all to no avail.
My phone has been in debugging mode and I do have the drivers installed (courtesy of the Huawei's website) so I'm not sure where to go from here.
I've learned that holding down the Power Button and the Volume Up button boots the phone into Recovery mode but I'm not sure if that's helpful or what to do with it. I considered attempting to use Odin but I can't find out how to get my phone into Download Mode (if it even has it).
If anyone could guide me of where to go or what to try, that would be greatly appreciated. I'll answer any questions that you need.
It's running 2.3.6 gingerbread, and the cell provider is Cricket, if anyone needed to know.
Huawei doesn't have the phone listed in phones that need the bootloader unlocked.
I've also found one tutorial, but it doesn't work, I keep getting permission denied on "adb push root/flash_image /data/local/", and it also uses Z4 and from what I've read, Z4 doesn't work on devices past 2.2, I could be wrong though.
Please help me, I'm a tad desperate.
Did you figure this out? ....or somebody did? Thanks.

[Q] Root request: Alcatel Onetouch Pop Icon A564C

Hello,
Just purchased this phone and would like a root in order to expand its storage. It's a new offering from TracFone and is limited for on-phone storage. Other than that, it's a fairly decent phone considering it is a TF. I searched the forums and found other similar phones, but none matched this one. If someone would be willing to help, you would get a lot of thanks from TF users who bought this phone.
MiMtnBiker said:
Hello,
Just purchased this phone and would like a root in order to expand its storage. It's a new offering from TracFone and is limited for on-phone storage. Other than that, it's a fairly decent phone considering it is a TF. I searched the forums and found other similar phones, but none matched this one. If someone would be willing to help, you would get a lot of thanks from TF users who bought this phone.
Click to expand...
Click to collapse
If you have PC follow these:
Try to download "kingo android" in your pc
then connect your device to pc via USB cable
open kingo android and start
If you dont have a pc and you have recovery mode in your device follow these:
search this: root (your device name) .zip file
and if you are successful put that zip file on root folder(the folder you see when you open your built-in file manager)
switch your phone to recovery mode
volume up, volume down, and menu button are the controls
navigate it to "apply update"
then choose your the zip file
If you dont have a pc and dont have a recovery mode follow these:
download "framaroot" "rootmaster" all apk
Hope it helps
cedie said:
If you have PC follow these:
Try to download "kingo android" in your pc
then connect your device to pc via USB cable
open kingo android and start
If you dont have a pc and you have recovery mode in your device follow these:
search this: root (your device name) .zip file
and if you are successful put that zip file on root folder(the folder you see when you open your built-in file manager)
switch your phone to recovery mode
volume up, volume down, and menu button are the controls
navigate it to "apply update"
then choose your the zip file
If you dont have a pc and dont have a recovery mode follow these:
download "framaroot" "rootmaster" all apk
Hope it helps
Click to expand...
Click to collapse
Thank you for your suggestions. I have tried several of the one-click methods for root (Kingo, Genius, towelroot, framaroot, etc.). All of which have been unsuccessful. Obviously, there is no rom available for this phone. If anyone has any other info, I would really appreciate it.
Expand Memory
I got the same phone same problem while i didnt find a root for it i found out how to install to sd very useful
go to google and type in how to install apps to sd card no root then click on the link for instructables i cannot post link because im a new user worked for me
would really appreciate a root method if anyone has one the storage issue is really annoying -_-
I realize this is an older thread, but I have devised a fully working root strategy for the Alcatel A564C. If anyone is interested let me know. If there is any interest I'll start a root thread for this device.
MotoJunkie01 said:
I realize this is an older thread, but I have devised a fully working root strategy for the Alcatel A564C. If anyone is interested let me know. If there is any interest I'll start a root thread for this device.
Click to expand...
Click to collapse
Hi MotoJunkie01. I saw your post today, and I just got an Alcatel A564C from TracFone. I would be very interested in rooting this device, since the accessible internal memory is so small it makes it almost unusable. Please open a root thread for this device if you feel there is enough interest. Or, if you would be willing, just send me a PM with the instructions. I have been able to gain temporary root permissions on this device using KingRoot, but they go away with every reboot. Also, I have not found any way to unlock the bootloader. Any help would be greatly appreciated. Thanks!
jp2006 said:
Hi MotoJunkie01. I saw your post today, and I just got an Alcatel A564C from TracFone. I would be very interested in rooting this device, since the accessible internal memory is so small it makes it almost unusable. Please open a root thread for this device if you feel there is enough interest. Or, if you would be willing, just send me a PM with the instructions. I have been able to gain temporary root permissions on this device using KingRoot, but they go away with every reboot. Also, I have not found any way to unlock the bootloader. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
I'll get a thread and a guide posted on rooting the A564C. I've had some PMs with interest as well. I'll post the link here once done.
MotoJunkie, fellow R.F. guy here, I have been browsing this site for well over a year and just signed up in fact this is my first post. I was following your information on the LG zone 3 as well. I own a brand new in the box A564C and just can't get it rooted. I too, tried different ways and actually was able to get temp root once with kingroot when the phone was really lagged out for some reason I had root until reboot. But now every version of kingroot that I run comes back with a network error which is strange and didn't used to happen. So please, let us know what you have found out. I am eager to hear back from you. And, thank you so very much for your willingness to share your knowledge.
Just checking back in, to see if any advancements or progress has been made. I'm excited about finally rooting this device and anxiously waiting.
MotoJunkie01 said:
I'll get a thread and a guide posted on rooting the A564C. I've had some PMs with interest as well. I'll post the link here once done.
Click to expand...
Click to collapse
I'm getting a thread started, as well as threads for other various devices. I know you're anxious, but please be mindful that XDA rules prohibit asking for ETAs and such. It's not that I particularly mind, I just don't want to see you sanctioned for rule violations by a moderator.
A couple of things, I I may....
First of all, aside from the rules (not that I'm saying that I don't respect them, I do but at the same time want you to know what I'm about to say is genuine and not out of fear of getting booted off the forum) I want to personally apologize if I came off as asking for an ETA or came off as rude or unappreciative in any way, shape or form. That was not my intent at all, and rather than PM you I wanted to publicly say that I am sorry for that and to let you know as I previously mentioned how much I enjoy reading your posts and am thankful for your willingness to share your knowledge. With that said I won't get off subject or topic again. I just felt that I needed you to know that I was just excited that someone had it figured out is all and I will pay closer attention on how I come across from now on. Take care.
JustinJay said:
A couple of things, I I may....
First of all, aside from the rules (not that I'm saying that I don't respect them, I do but at the same time want you to know what I'm about to say is genuine and not out of fear of getting booted off the forum) I want to personally apologize if I came off as asking for an ETA or came off as rude or unappreciative in any way, shape or form. That was not my intent at all, and rather than PM you I wanted to publicly say that I am sorry for that and to let you know as I previously mentioned how much I enjoy reading your posts and am thankful for your willingness to share your knowledge. With that said I won't get off subject or topic again. I just felt that I needed you to know that I was just excited that someone had it figured out is all and I will pay closer attention on how I come across from now on. Take care.
Click to expand...
Click to collapse
You're are both respectful and courteous, qualities that are coveted and always welcome here at XDA. I didn't take any offense to your questions but I appreciate your kind words. On an update for this device, I'll be posting a root thread early this week coming -- Tuesday or Wednesday most likely. I have threads for this and at least 4 more devices I'll be posting.
Thanks again for your kind words. By the way I'll be posting the link to my thread here, so check early in the week.
I certainly will...thanks for your reply, and can't wait! I will keep checking back periodically. Thanks again!!
Update: I'm experiencing a boot loop on my own device from trying to flash custom recovery. Trying to get this snag worked out and get the tutorial posted. Sorry for delay.
Hey,..noooo problem on this end...again, just grateful you're both willing to work through the issues and obstacles as they come your way (and if it's anything like that happens to me they sometimes seem to come out of no where, just about when I think my task is complete) but also appreciative that you're willing to share. I would like to start a new thread, not to pile on your list of people bugging you about things already, but need to find the right section. It is more of an R.F. type related question with regards to the modems in the phones and weather the modulation techniques and bands capable are software driven like a software defined radio or more hardware dependent. I know as far as bands go the frequency coverage would have to depend on hardware all the way from the local oscillator to the RX strip to the TX PA as far as gain and linearity, duplexors of some type, antenna (s) being resonant at the middle of the desired band (s) but as far as modulation techniques being more software controlled somehow? Anyways, stuff that I am very interested in but haven't found a section??
MotoJunkie01 said:
Update: I'm experiencing a boot loop on my own device from trying to flash custom recovery. Trying to get this snag worked out and get the tutorial posted. Sorry for delay.
Click to expand...
Click to collapse
MotoJunkie01 - I'm curious to know if this boot loop issue has resulted in you stopping work on rooting this device? Although I am still interested in obtaining root on this phone, I'm cool either way. I'm just posting to see if you think obtaining root and posting a tutorial is still in the cards?
Thanks again for your work on this. I really do appreciate it.
I'm sorry guys. Upon trying to flash the device with a stock fir!mware image to fix the boot loop, my device is now hard bricked. I can tell you, in order to root your device, use the latest KingRoot apk. This will give you temp root only, meaning root will not survive a reboot. So, to gain permanent root, install BusyBox (any version should suffice), then download SuperSU-Me Pro from the Play Store (paid app). This will eradicate the KingRoot root binaries from your device and replace them with the latest version of SuperSU. You will then have full root.
To root Alcatel One Touch Pop Icon A564C with KitKat 4.4.2 TracFone, download KingRoot for pc in English from this site. It rooted on the 2nd run.
On the xda-developers forum, find the following:
android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
RAWilson100 said:
To root Alcatel One Touch Pop Icon A564C with KitKat 4.4.2 TracFone, download KingRoot for pc in English from this site. It rooted on the 2nd run.
On the xda-developers forum, find the following:
android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Click to expand...
Click to collapse
Hello.
I will thank you if this method would work on my phone, but I am unsure my root would be successful. I would appreciate the steps you took in order to root the A564C(such as time to root, USB debugging, etc.) and if you can post how your phone is doing since the root. I would be much thankful.

[Q&A] [GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!)

Q&A for [GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Everything works until....
the very last stage when I put in adb devices and it says command not found???
Please advise
Simon
Thank you AshtonTS
I had been stuck in boot animation after trying to install a modification and with your help and another on flashing a stock image I'm back up and running! Thanks so much.
Followed the whole step-by-step and I got it to work. After I unlocked the bootloader using the how-to from Sony, the device can't be found anymore.
Any thoughts?
[edit] Got it, USB-check was turned off. My bad
i've followed this yet when i execute ./adb devices no devies show up... anyhelp would be greatly appreciated.
tnx
Flash
How can I flash TWRP, root my device and load OS 11 using this method? Thanks in advance...
How can I get the latest dab and fast boot?
Or else, how can I know if the ones I have are right for my Nexus 5?
I've downloaded the ones posted by r0ger here: http://forum.xda-developers.com/showpost.php?p=61676680&postcount=183
I'm pretty sure everything should work ok, but after burning a N4 last year, when modding from a Mac, I now proceed very carefully.
Thank you.
When I enter the command
./adb devices
My device is shown, but it is shown as offline. Further I cannot execute any other commands.

[Q&A] Galaxy Player 5.0 Bootloader *ONLY* Hard Brick Recovery

Q&A for Galaxy Player 5.0 Bootloader *ONLY* Hard Brick Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Galaxy Player 5.0 Bootloader *ONLY* Hard Brick Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Brick of Galaxy S Wifi 5
Hi, I've bloqued a Galaxy S Wifi 5. I did not notice that a phone was call Galaxy S and I take the wrong files with Odin so root fail but when I turn Off the tablett from Dowloading mode, it never boot anymore, screen stay black. I unplug the battery but no change.
I try UnbrickableResurrector R40 on Ubuntu, but the device detected is S5PC110 and when I choose device type S5PC111 (Galaxy Player), i lauch Perform Resurrection - Download Mode, then it stop to please wait... Uploading.. but nothing more.
I need help, thanks
Hi, anyone to help me?:crying:
Hi everybody , I found the problem, it was gksudo wich was not installed.
So the downloading mode is back
Hi, so i say that I succeed to have the download mode with Unbrickable resurector but the galaxy is not detected by Virtual Box.
Can you help me?
Thx
Hi,
ok I succed to flash via odin, but screen is always black, galaxy is always view as Gti9000 in odin.
I try different flahs via odin, they succed but not result.
Please, anyone to help?
Any chance?
Could I, by any chance, use this to restore to the stock bootloader without a hard brick or Linux? I accidentally restored factory software to Bootloader instead of PDA, but I installed it right now, however it just loops the boot animation.

Comprehensive guide on unbricking the ASUS transformer pad 103c (TF103C)

Welcome to the comprehensive guide on rooting and unbricking your precious TF103C!
Some words of wisdom and truth
You will most likely be here because, you know, your device is bricked.
First of all, I would like to say that none of the downloadable links are made by me. I happened to find them laying around XDA after looking for a solution for a long time.
Skip this if you don't want to know the reason behind this thread
I got this device a while back (my guess is 4 months), and loved it from the start. Rooted it, of course, and soon after, it didn't want to boot anymore.
As there isn't much development going on (due to the locked bootloader), it's hard to find a solution for bricking. While scrolling, I came upon a post from member gouster3, which came to the solution below. I myself have used this successfully, and have my tablet back. In my opinion, also on rooting, there was no dedicated thread available that really explained the steps to root the device, so as a thank you to the guys who got my tablet fixed, here it is!
The rooting process
The rooting of this tablet is quite easy, really! I'll explain in a few simple steps.
Head into settings > security > then turn on unknown sources
Download the Rootzenfone .apk file. get it here
Install the app (if it is still in your notification bar you can just press the downloaded file, or you can navigate to it's location to install from there)
Turn on airplane mode before you open the app
Open the app, and hit "OK, I know, please root!" (when you press this, a number of screens and a popup will show, ignore those)
5 seconds after pressing, restart your tablet.
Hooray! You are now rooted!
Unbricking your device
Luckily, unbricking is almost as easy as rooting the phone, if you know the steps you have to follow. Here's what you could do (it worked for me) if you still have acces to DROIDboot.
As always, install the adb drivers first! get it here
# You can also make sure the correct driver is installed when plugging in the device in DROIDboot mode. In you device manager it should show up as Android Debug Bridge#
Download these files, containing a clean system. get it here
Make sure the device is turned off, and the battery is at least 50% (just to ensure a complete flash before your battery runs out)
Hold volume+ and power untill the asus screen pops up, then release the power button.
Plug in the tablet to your pc (usb cable) when DROIDboot has been loaded.
Open the downloaded folder, and find 'update_image.bat'
Right click the .bat file, and choose 'run as administrator'
A CMD screen should open on your PC indicating the flashing status. All you have to do now (assuming that it works as intended) is wait untill the process is completed.
Your tablet will reboot automatically when the process is done.
That's it! the 2 things that keep this tablet alive. I would like to send a thanks to the members who were so kind to help me out on this.
gouster3, for providing the link to the unbrick solution
Eclipse00, for giving the link to the rootzenfone apk
Monki, for giving me a clean system.img and putting effort into getting my tablet running again
To all of you, thanks!
It works on my TF103CX too. (it is same hardware).
When i bricked my TF103CX, i had around 80% of battery, but i was not able to charge,
so be careful when bricking. Always do interventions to system with full battery.
//I think, we need add our TF103C to xda device list. it will be nice.
I heared that using Intel Manufacting Tool we can get UEFI instead of Droidboot, and boot Ubuntu/Windows on IntelBay tablets. I found guide for Teclast: http://forum.xda-developers.com/android/general/teclast-x98-air-3g-tablet-9-7-2048x1536-t2913035 But i cannot find any UEFI fot TF103C. I dont want to full brick m device with trying flash it.
Here is original thread in russian language.
Thanks
Thanks for helping me rescue my tablet. Much appreciated
Could anyone please confirm if the rooting method may be used on the TF103CG (K018) model? Or in general is the app able to root any device that is anyhow Zen-related?
this don´t work if you have lillipop on tf103c, the droidboot don´t load, You only get Fasboot starting and nothing more...
i want the raw lollipop image ( system.img ) for tf103c
will this essentially work as a factory reset? mine touch isn't working; and i just want to nuke all my data off the device
Hello all, I just ordered a TF0310C (Best Buy exclusive) from woot.com which will be here tomorrow and the closest thing I can find information on is the TF103C (both are Intel processors), and just trying to find as much info on it as I can. I was unable to find any roms or anything for the TF0310c, will things from the TF103C work on the TF0310C such as rooting or custom recovery at least?
http://computers.woot.com/offers/asus-transformer-pad-10-1-android-tablet-1
Unbrick not working on tf103c running KK. It looked like it was doing something, but no luck. Any common troubleshooting tips?
m374llic4 said:
Will things from the TF103C work on the TF0310C such as rooting or custom recovery at least?
http://computers.woot.com/offers/asus-transformer-pad-10-1-android-tablet-1
Click to expand...
Click to collapse
I know its a bit late, but perhaps better than never. I'd say those devices are identical, but somehow there is a weird naming mixup. Here are the official ASUS pages for them:
http://www.asus.com/supportonly/ASUS Transformer Pad TF0310C/HelpDesk/
https://www.asus.com/Tablets/ASUS_Transformer_Pad_TF103C/specifications/
Whatever you do on the first link, it will be eventually redirected to somewhere that belongs to the second. Their specifications are also basically the same. This is still a guessing game tough, so the best would be to compare 2 build properties, partition tables etc. of those devices to know more.
Rooting will most likely work, Zenroot should do it regardless of device type.
hello,
i have tried different way to unbrick my tf103c, but none is working
i have access to fastboot
i successfully run your bat file to copy the image, but after it reboot and stays on the "asus" logo
if i launch the command after modified the name of the "AS-TF103C-v67.43-capsule.bin" into "capsule.bin", it reboot then a blue progress bar is showing, when the bar is complete the tab reboots, but again it stays on the "asus" logo :'(
do you have any advise ?
Same issue
Hello,
I have the same issue with my tf103c ; i was trying to apply a new update from asus support (to get android 5).
It didn't work and in addition to that, my device results to be bricked.
I have successfully run the bat file, but then i get stuck at Asus logo and device never boot...
Icarolo did you manage to solve your issue ? Is someone really succeed in unbrick tf103c device ?
Thank you in advance
Dead
Hi! I have an asus tf103c and i rooted it with the rootzenfone.apk but now it doesn't turn on at all. after i pressed okay, waited about 15 sec and then i restarted it, but it just turned off. And now it's dead. What should i do?
ASUS K010 (TF103C). I forgot how to enter Recovery
Hello everyone, I have an ASUS K010 (TF103C). The complete model is TF103C-MB1-BLK-DK.
I forgot how to enter Recovery. My Asus is bricked. I know it is possible to enter the recovery because a few months ago I entered and also enter droidboot mode. On that occasion I discovered pressing the buttons energy, volume +, volume - somehow, because I did not work the methods that were in different sites websites, but now I do not remember the exact way of pressing the buttons. I tried many methods but they do not work, only the "Asus looking for incredible" logo appears. The battery has a charge (I charge it manually).
If someone has this same model and knows how to enter the recovery would greatly appreciate it.:good:
I think you can enter the droidboot menu by pressing Volume Up + Power for several secondes.
i dont have acces to DROIDboot.
How can unbrick my tf103c.. thanks
i dont have acces to DROIDboot.
How can unbrick my tf103c.. thanks
Brick3d said:
Welcome to the comprehensive guide on rooting and unbricking your precious TF103C!
Some words of wisdom and truth
You will most likely be here because, you know, your device is bricked.
First of all, I would like to say that none of the downloadable links are made by me. I happened to find them laying around XDA after looking for a solution for a long time.
Skip this if you don't want to know the reason behind this thread
I got this device a while back (my guess is 4 months), and loved it from the start. Rooted it, of course, and soon after, it didn't want to boot anymore.
As there isn't much development going on (due to the locked bootloader), it's hard to find a solution for bricking. While scrolling, I came upon a post from member gouster3, which came to the solution below. I myself have used this successfully, and have my tablet back. In my opinion, also on rooting, there was no dedicated thread available that really explained the steps to root the device, so as a thank you to the guys who got my tablet fixed, here it is!
The rooting process
The rooting of this tablet is quite easy, really! I'll explain in a few simple steps.
Head into settings > security > then turn on unknown sources
Download the Rootzenfone .apk file. get it here
Install the app (if it is still in your notification bar you can just press the downloaded file, or you can navigate to it's location to install from there)
Turn on airplane mode before you open the app
Open the app, and hit "OK, I know, please root!" (when you press this, a number of screens and a popup will show, ignore those)
5 seconds after pressing, restart your tablet.
Hooray! You are now rooted!
Unbricking your device
Luckily, unbricking is almost as easy as rooting the phone, if you know the steps you have to follow. Here's what you could do (it worked for me) if you still have acces to DROIDboot.
As always, install the adb drivers first! get it here
# You can also make sure the correct driver is installed when plugging in the device in DROIDboot mode. In you device manager it should show up as Android Debug Bridge#
Download these files, containing a clean system. get it here
Make sure the device is turned off, and the battery is at least 50% (just to ensure a complete flash before your battery runs out)
Hold volume+ and power untill the asus screen pops up, then release the power button.
Plug in the tablet to your pc (usb cable) when DROIDboot has been loaded.
Open the downloaded folder, and find 'update_image.bat'
Right click the .bat file, and choose 'run as administrator'
A CMD screen should open on your PC indicating the flashing status. All you have to do now (assuming that it works as intended) is wait untill the process is completed.
Your tablet will reboot automatically when the process is done.
That's it! the 2 things that keep this tablet alive. I would like to send a thanks to the members who were so kind to help me out on this.
gouster3, for providing the link to the unbrick solution
Eclipse00, for giving the link to the rootzenfone apk
Monki, for giving me a clean system.img and putting effort into getting my tablet running again
To all of you, thanks!
Click to expand...
Click to collapse
Hi, I see that the thread is old, but I need to fix my old pad. I can do all the steps, but the problem is that I can not find a clean system I can install. I will really appreciate if someone could give me a link to one.
Unbricking tf103c
Hello,
Is it possible to unbrick somehow a device like mine. I dont have either bootloader or recovery or anything (I have two same tablets) and I mess one up. After new update touch screen stopped working so I installed something (I dont remember) i installed new recovery and then tried to install new rom...Every time I power it on (doesnt matter standar od with combos it just show asus logo in search of incredible and that's it. I managed if I press both VOL - and VOL + AND PWRBTN I get something in device manager "Unknown USB Device (Device Descriptor Request Failed)"! Is there anything I can do?

Categories

Resources