Hello everyone.. I am trying to get my WIND sim card to work on my unlocked Note i717r (ROGERS). I successfully installed CMW touch recoveries and rooted the phone (installed superuser), after that installed the modem from http://forum.xda-developers.com/showpost.php?p=23522477&postcount=306 - (T-mobile SGH-T989 KID). then followed the steps from http://forum.xda-developers.com/showthread.php?p=23621077
3. Reboot your phone.
4. Go to Settings
5. Go to Wireless and network
6. Go to Mobile networks
7. Go to Network mode
8. Select HSPA only.
but had to manually search for network to 302490... and this took a while and finally got WIND home.
After a few mins (like 20min) I get back "No service" and when I go to Wireless and network> Mobile Network> Network operator> "No sim card found, please insert sim card"......
Tried the same method on Stock rogers rom 2.3.6 (http://forum.xda-developers.com/showthread.php?t=1657262) and 4.0.4 ICS, also on i717_DTLLF4_CustomCanadian_B2 Rom.
I cannot flash any other rom as it does not allow me to search network manually...
I always factory wipe>wipe cache>wipe dalvik>format system>flash Modem>flash i717_DTLLF4_CustomCanadian_B2
I see some guys have got their Note working on WIND even with custom ROM. Help me getting me to get my WIND sim work on my NOTE i717r. Saw some guys asking for the same question but never got any reply/solution from them or their posts.
I am sure I must be doing something wrong.... I tried blaze 4g, KID,VK1, Leaked ICS T-Mobile SII based Modem.
superman07 said:
Hello everyone.. I am trying to get my WIND sim card to work on my unlocked Note i717r (ROGERS). I successfully installed CMW touch recoveries and rooted the phone (installed superuser), after that installed the modem from http://forum.xda-developers.com/showpost.php?p=23522477&postcount=306 - (T-mobile SGH-T989 KID). then followed the steps from http://forum.xda-developers.com/showthread.php?p=23621077
3. Reboot your phone.
4. Go to Settings
5. Go to Wireless and network
6. Go to Mobile networks
7. Go to Network mode
8. Select HSPA only.
but had to manually search for network to 302490... and this took a while and finally got WIND home.
After a few mins (like 20min) I get back "No service" and when I go to Wireless and network> Mobile Network> Network operator> "No sim card found, please insert sim card"......
Tried the same method on Stock rogers rom 2.3.6 (http://forum.xda-developers.com/showthread.php?t=1657262) and 4.0.4 ICS, also on i717_DTLLF4_CustomCanadian_B2 Rom.
I cannot flash any other rom as it does not allow me to search network manually...
I always factory wipe>wipe cache>wipe dalvik>format system>flash Modem>flash i717_DTLLF4_CustomCanadian_B2
I see some guys have got their Note working on WIND even with custom ROM. Help me getting me to get my WIND sim work on my NOTE i717r. Saw some guys asking for the same question but never got any reply/solution from them or their posts.
I am sure I must be doing something wrong.... I tried blaze 4g, KID,VK1, Leaked ICS T-Mobile SII based Modem.
Click to expand...
Click to collapse
Hey man, I did the same thing I unlocked a rogers i717 and used it on wind.
I don't use CWM though, Try using TWRP
I flashed my phone with cm9 using TWRP, and used the blaze 4g modem or ics modem.
but i think every other rom i've flashed after that, it automatically connects to wind now :s
after you get the phone to connect to wind, touch "Search automatically", then you wont have to manually search everytime the phone reboots.
I'm trying to get my gsm card work on my US Cellular version of the Galaxy S4 (Rooted with custom recovery).
Flashed : 1.)CM11 ROM ( jftlte) [gsm antenna not working]
2.) CM11 (jftltevzw) [error while flashing]
3.)CM11 (jftlteusc) [works fine and options available for gsm mode but unable to switch it;always reverts back to either cdma/evdo/lte mode
4.)CM10(usc version) tried downgrading still not detecting
5.) Tried Odin Method of flashing a different firmware modem, always fails(maybe because I'm unable to find the one pda file which is actually gsm?)
Is there ANY way so that I can use my gsm or other cdma sim card on my device.?
any help is appreciated!
So I have installed the latest stock firmware on my Samsung Galaxy S6 Edge (Android 6.0.1).
I have inserted my SIM (Romanian carrier, Orange) and it asks for my PIN code, but it doesn't connect to the network for some reason. I tried Googling and everything, but every post said that I should change the network mode, and that's there I found the possible reason my device doesn't connect to the network.
I am missing GSM and WCDMA from the network mode list, does anybody have any idea how I could enable them?
Before upgrading, my SIM card worked just fine.
Thank you.
EDIT: xda-developers doesn't let me add links to pictures...so here's the imgur link with two spaces in it http:/ /imgur.com/ a/FCwst
EDIT 2: I have installed the latest firmware using Samsung Kies, no fancy Odin flashing, so this is the official firmware.
Masters, i badly need your help on how i can do this to my phone. My mobile signal/reception suddenly went dead using 4G or 3G (signal changes to Emergency calls only) but only works on Edge/GMS mode. my sim card normally works on a different phone but only my s6 edge can't detect mobile signal from 3G or 4G.
Things I've done.
Changed sim card - same issue
Reset Network Settings - same issue
Factory Reset the phone - same issue
I read a post that Modem can be flashed using old version of android but I can't find the file to use and I don't know the option to select in Odin. Can someone help me on this?
My device Information:
Samsung S6 Edge
SM-G925F - from Philippines (Globe network)
vinsu04 said:
Masters, i badly need your help on how i can do this to my phone. My mobile signal/reception suddenly went dead using 4G or 3G (signal changes to Emergency calls only) but only works on Edge/GMS mode. my sim card normally works on a different phone but only my s6 edge can't detect mobile signal from 3G or 4G.
Things I've done.
Changed sim card - same issue
Reset Network Settings - same issue
Factory Reset the phone - same issue
I read a post that Modem can be flashed using old version of android but I can't find the file to use and I don't know the option to select in Odin. Can someone help me on this?
My device Information:
Samsung S6 Edge
SM-G925F - from Philippines (Globe network)
Click to expand...
Click to collapse
hi try using Samsung switch . or pit files from samfimware.
Hello everyone,
I need help with resurrecting the above phone model. After updating it via Samsung Switch, it 'magically' stopped receiving network recognition but it could sense the SIM card's network operator. I tried dialing some numbers and it said "Not registered on the network". I ran to the internet through various forums. I have been re-flashing STOCK ROM and i was getting PASS; still no good came out. I tried custom ROMs, same thing. NOW suddenly i got an efs/ failed to mount. How can i resurrect my baby? All i have about the phone is:
AP: G925FXXU6EVG4 (Build number) - NDR90M
CP: G925FXXU6ERF5 (Baseband version)
CSC: G925FXXU6EVG4 (Country version) - 02U
IMEI SV - 02
SN - RF8G610C1MN
The stock ROMs i have downloaded so far are:
1. Samfw.com_SM-G925F_O2U_G925FXXU6EVG4_fac.zip (stock ROM based on the last successful booting ROM; after updating via Samsung Switch)
2. Samfw.com_SM-G925F_O2U_G925FXXU6ERG1.zip
I have these in place:
- Samsung S6 Series EFS Backup Restore Tool v1.0 By Jamesjerss.exe (which i used prior; to get an efs.img before my phone got messed up (a 20Mb file was created). Is that the backed up EFS?
- Odin Odin3_v3.14.4
- CF-Auto-Root-zerolte-zeroltexx-smg925f.zip
- twrp-3.3.1-0-zerolte.img.tar and twrp-3.3.1-0-zerolte.img (i wonder the difference although the internet says i use .tar with Odin)
- SR5-SuperSU-v2.82-SR5-20171001224502.zip
Now, the stock ROM stops on the RECOVERY MODE with efs/ failed to mount, and when i try the custom ROM, it stops on SAMSUNG Galaxy S6 Edge. In all recovery modes, good enough my PC detects my phone's internal storage. I need to get this device to work, people.
Someone help with with a step by step tutorial, please. I am a fast learner
PS Am not a tech student or anything, am just a person who reads stuff on the internet although i understand some basic stuff on tech
splk said:
Hello everyone,
I need help with resurrecting the above phone model. After updating it via Samsung Switch, it 'magically' stopped receiving network recognition but it could sense the SIM card's network operator. I tried dialing some numbers and it said "Not registered on the network". I ran to the internet through various forums. I have been re-flashing STOCK ROM and i was getting PASS; still no good came out. (...)
Click to expand...
Click to collapse
1. If you think about Smart Switch Mobile, it is not for update.
2. Go back to Stock firmware via odin.
2. Have you seen >this< tutorial?
how can i know the stock firmware of the phone....i only remember the one that was updated via Smart Switch (Hanset: Samsung Galaxy S6 Edge G925F single SIM card slot no SD card slot)
1. Check your CSC on the phone box or with the Phone INFO app ★SAM★ 3.8.5.
2. Select your CSC region in the "Version" box read the instructions and download the firmware.
3. Use Odin 3.13.1 to update this model.
@ze7zez. Just bought it from some phone shop that sells used phones. I have the needed STOCK firmware already. The CSC is 02U G925F---VG4. All am getting is this image below:
Since your system is not working, go to "View recovery logs" and look for CSC or "region name".
You can also try uploading firmware from your country's region.
The CSC is 02U (O2) which according to internet research it is UK
Download SM-G925F / Galaxy S6 Edge SM-G925F O2U in Samfw - Samsung firmware download
SM-G925F / Galaxy S6 Edge SM-G925F O2U samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
ze7zez said:
Download SM-G925F / Galaxy S6 Edge SM-G925F O2U in Samfw - Samsung firmware download
SM-G925F / Galaxy S6 Edge SM-G925F O2U samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Click to expand...
Click to collapse
@ze7zez thats where i got the firmwares from
SM-G925F O2U G925FXXU6EVG4
click
Download on Browser
or
Dowload SamFw server
ze7zez said:
SM-G925F O2U G925FXXU6EVG4
click
Download on Browser
or
Dowload SamFw server
Click to expand...
Click to collapse
I already have all firmwares for this handset from 02U. I have tried EVERY STOCK ROM...but all am getting is E: Failed to mount '/efs' (Invalid argument).
I tried EFS-Fix-regalstreak.tar.md5 basing on https://ajketech.wordpress.com/2016/07/27/efs-missing-factory-mode-activated-here-is-the-solution/ i got FAIL.
I do have an efs.img i made before all of this whole saga but i don't know if it is broken or okay.
Try flashing TWRP from >this< manual. Read it carefully!
With TWRP you will have more options for repair.
ze7zez said:
1. If you think about Smart Switch Mobile, it is not for update.
2. Go back to Stock firmware via odin.
2. Have you seen >this< tutorial?
Click to expand...
Click to collapse
i have tried and failed....up to 3. COuldn't proceed to 4. Thanks though
https://forum.xda-developers.com/t/guide-how-to-fix-efs-damaged-on-samsung-devices-easy.3850032/ try this