UPDATE: Star Kernel v2 (Fixed)
Features in brief:
Swap Memory Support:
-> Most awaited and desired feature for GT-S7262.
-> Increase your handset RAM size (virtually) using third party app or init.d script.
-> Use any Ram Expanding application or init.d script for Swap Memory. Make sure you have enough free space in external sd-card to be used as Virtual Ram.
-> Make sure you select external sd-card as swap partition before applying changes in your favourite ram expanding app/script.
Init.d support:
-> It allows users to install scripts and mods to be run at boot. Everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods, only possible through the Init.d process.
-> Make sure you have busybox in your xbin folder with run-parts enabled before trying out this feature.
-> Add any scripts you like to run at boot at /etc/init.d/ folder.
Scale CPU Frequencies:
-> Use your favourite CPU scaling applications to scale GT-S7262 CPU frequencies.
-> Make sure what you are doing before trying and crying out for heated batteries, misbehaving apps/system and dead handset. I am not responsible for anything you do. I just provided a way to achieve scaling frequencies.
Recovery key combination:
-> No need to hold 3 buttons at the same time to boot into CWM recovery, just press and hold power button until Samsung logo appears.
-> You will see red exclamation mark on top left corner by default.
-> Release the power button and just hold volume up button until CWM pops up.
-> Don't press anything if you don't want to boot into CWM after samsung logo appears. Phone will boot into normal mode.
USB Force Fast Charge App Support:
-> USB Fast Charge allows you to charge battery faster when connected to a PC/Laptop via USB using Fast Charge App. Very useful in certain situations.
-> Increases input current limit to 1000mA when charging via USB.
-> Required App: https://play.google.com/store/apps/details?id=nz.org.winters.android.gnfastcharge&hl=en
USB Keyboard Support:
-> Turn your Android device into USB keyboard/mouse for your PC/Laptop. Very useful in certain situations.
-> Steps:
* Start ADB Debugging
* Start app
* Connect device to system via USB cable
-> Required app: https://play.google.com/store/apps/details?id=remote.hid.keyboard.client
DriveDroid Support:
-> DriveDroid allows you to boot your PC from ISO/IMG files stored on your phone. This is ideal for trying Linux distributions or always having a rescue-system on the go without the need to burn different CDs or USB pendrives.
-> Required App: https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid
exFAT support:
-> Linux non-fuse read/write kernel driver for the exFAT file system.
Reserved for features requests.
anilsingh1605 said:
Star Kernel v1
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this Kernel before flashing it! You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Requirements:
1) CWM Recovery
2) Rooted Handset
For help visit: https://www.facebook.com/groups/S7262/659917687459110/
Steps to flash Star Kernel v1:
1) Download and transfer attached star-kernel-v1-signed.zip file to your handsets external sd-card.
2) Power off your mobile, wait for a minute, press Power button for 2 seconds and then simultaneously press and hold Volume UP + Home buttons at the same time.
3) When you see a read exclamation mark on top left corner, release the power button and keep holding other buttons. Your device will now enter into CWM Recovery mode.
3) Use power button to select and volume buttons to navigate.
4) install zip -> choose zip from sdcard -> star-kernel-v1-signed.zip -> Yes - Install star-kernel-v1-signed.zip
5) Thats it, Watch Star Kernel v1 getting installed. When finished installing, ++Go Back++, reboot system now.
Now enjoy the features and speed of Star Kernel.
Features:
* Compiled from samsung kernel source.
* Compiled using official ARM toolchain 4.6
* Smooth like butter
* Should work on every GT-S7262 baseband and build
* Swap Memory Support
* CPU Frequency Scaling Enabled. Scale CPU frequencies using apps like Set CPU.
* CPU Idle Power Management Support.
* Added SmartassV2 (tweaked) Governor as default Governor
* Added Simple I/O (SIO) (optimized) Scheduler as default Scheduler
* Other Governors and Schedulers enabled. Use your favourite one.
* Init.d support (busybox run-parts)
* Optimized for size
* Increased panic timeout
* Increased performance and responsiveness (Preemption Model)
* Insecured kernel (easy root)
* USB Fast Charge support
* USB Keyboard support
* DriveDroid support
* Support for FAT, MSDOS, VFAT, EXFAT and NTFS (R/W) file systems
* Recovery key combination: No need to hold 3 buttons at the same time to boot into CWM recovery, just press and hold power button until Samsung logo appears. You will see red exclamation mark on top left corner by default. Release the power button and just hold volume up button until CWM pops up. Don't press anything if you don't want to boot into CWM after samsung logo appears. Phone will boot into normal mode.
For features brief info, check Post #2.
Download: click here to download from Google drive
XDA:DevDB Information
star-kernel, Kernel for the Samsung Galaxy Star
Contributors
anilsingh1605
Source Code: https://github.com/GalaxyStarPro/android_kernel_samsung_logan2g
Kernel Special Features: Check post #2 for special features descriptions
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2015-03-24
Created 2015-03-24
Last Updated 2015-03-24
Click to expand...
Click to collapse
I won't be able to use it now But I already pressed thanks! Great work! :victory:
greate
anilsingh1605 said:
Star Kernel v1
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this Kernel before flashing it! You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Requirements:
1) CWM Recovery
2) Rooted Handset
For help visit: https://www.facebook.com/groups/S7262/659917687459110/
Steps to flash Star Kernel v1:
1) Download and transfer attached star-kernel-v1-signed.zip file to your handsets external sd-card.
2) Power off your mobile, wait for a minute, press Power button for 2 seconds and then simultaneously press and hold Volume UP + Home buttons at the same time.
3) When you see a read exclamation mark on top left corner, release the power button and keep holding other buttons. Your device will now enter into CWM Recovery mode.
3) Use power button to select and volume buttons to navigate.
4) install zip -> choose zip from sdcard -> star-kernel-v1-signed.zip -> Yes - Install star-kernel-v1-signed.zip
5) Thats it, Watch Star Kernel v1 getting installed. When finished installing, ++Go Back++, reboot system now.
Now enjoy the features and speed of Star Kernel.
Features:
* Compiled from samsung kernel source.
* Compiled using official ARM toolchain 4.6
* Smooth like butter
* Should work on every GT-S7262 baseband and build
* Swap Memory Support
* CPU Frequency Scaling Enabled. Scale CPU frequencies using apps like Set CPU.
* CPU Idle Power Management Support.
* Added SmartassV2 (tweaked) Governor as default Governor
* Added Simple I/O (SIO) (optimized) Scheduler as default Scheduler
* Other Governors and Schedulers enabled. Use your favourite one.
* Init.d support (busybox run-parts)
* Optimized for size
* Increased panic timeout
* Increased performance and responsiveness (Preemption Model)
* Insecured kernel (easy root)
* USB Fast Charge support
* USB Keyboard support
* DriveDroid support
* Support for FAT, MSDOS, VFAT, EXFAT and NTFS (R/W) file systems
* Recovery key combination: No need to hold 3 buttons at the same time to boot into CWM recovery, just press and hold power button until Samsung logo appears. You will see red exclamation mark on top left corner by default. Release the power button and just hold volume up button until CWM pops up. Don't press anything if you don't want to boot into CWM after samsung logo appears. Phone will boot into normal mode.
For features brief info, check Post #2.
Download: click here to download from Google drive
XDA:DevDB Information
star-kernel, Kernel for the Samsung Galaxy Star
Contributors
anilsingh1605
Source Code: https://github.com/GalaxyStarPro/android_kernel_samsung_logan2g
Kernel Special Features: Check post #2 for special features descriptions
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2015-03-24
Created 2015-03-24
Last Updated 2015-03-24
Click to expand...
Click to collapse
greate job done by you .Thanks for your hard work
Added warning and baseband support info in first post. Please go through the 1st post before flashing the kernel and also updated features brief info in 2nd post.
Thanks.
Aniruddha_Pathak said:
I won't be able to use it now But I already pressed thanks! Great work! :victory:
Click to expand...
Click to collapse
vishal.ghodake said:
greate job done by you .Thanks for your hard work
Click to expand...
Click to collapse
Thanks guys. Thanks a lot.
****Device Unstable****
Hello Anil,
First, a big thank you for the work done., I really appreciate your efforts in compiling this Kernel.
I just want to share results that I got after flashing the Kernel :
***Checklist Before Flashing***
*Stock ROM and Stock Kernel, updated to the latest samsung release.
*Baseband as required.
*Rooted device.
After I flashed the kernel, the device is unstable. Here is what Im facing :
*RAM Expander first started to act crazy.
*Application wont install, error I get is "Application Not Installed".
*Device getting Auto-Reboot.
*Network Errors.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Please suggest on how I can proceed to uninstall this. Do I need to flash the stock ROM?
Or would there be any update to fix the problems im facing?
Thank you in advance,
Owais Ahmed Siddiqui
Owais Siddiqui said:
Hello Anil,
First, a big thank you for the work done., I really appreciate your efforts in compiling this Kernel.
I just want to share results that I got after flashing the Kernel :
***Checklist Before Flashing***
*Stock ROM and Stock Kernel, updated to the latest samsung release.
*Baseband as required.
*Rooted device.
After I flashed the kernel, the device is unstable. Here is what Im facing :
*RAM Expander first started to act crazy.
*Application wont install, error I get is "Application Not Installed".
*Device getting Auto-Reboot.
*Network Errors.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Please suggest on how I can proceed to uninstall this. Do I need to flash the stock ROM?
Or would there be any update to fix the problems im facing?
Thank you in advance,
Owais Ahmed Siddiqui
Click to expand...
Click to collapse
I hope you followed instructions I messaged you to solve your problem long ago.
Star Kernel V2 released. Please check #1: http://forum.xda-developers.com/showpost.php?p=59649699&postcount=1 for more details.
****V2 is great****
I suggest samsung to use this as their Official Kernel for our devices!! Great Work Anil!!!!
Its running smooth on my device now!!! No issues so far!
Owais Siddiqui said:
I suggest samsung to use this as their Official Kernel for our devices!! Great Work Anil!!!!
Its running smooth on my device now!!! No issues so far!
Click to expand...
Click to collapse
thanks
anilsingh1605 said:
Star Kernel V2
Restoring efs/IMEI:
1) Follow this only if you have lost IMEI, network problems, internel memory problems or yellow screen problem.
2) Make sure you have "efs.rfs" file in your external memory card. You might have copied it to a safe location, copy it to external memory card if its not present in memory card.
3) Download and transfer attached efs-restore-signed.zip file to your handsets external sd-card.
4) Power off your mobile, wait for a minute, press Power button for 2 seconds and then simultaneously press and hold Volume UP + Home buttons at the same time.
5) When you see a read exclamation mark on top left corner, release the power button and keep holding other buttons. Your device will now enter into CWM Recovery mode.
6) Use power button to select and volume buttons to navigate.
7) install zip -> choose zip from sdcard -> efs-restore-signed.zip -> Yes - Install efs-restore-signed.zip
8) Thats it, your backed up efs will be restored. When finished, ++Go Back++, reboot system now.
Now enjoy the features and speed of Star Kernel.
Downloads:
Star Kernel V2: https://www.androidfilehost.com/?fid=95916177934552283
IMEI/efs Restore: https://www.androidfilehost.com/?fid=95916177934552284
XDA:DevDB Information
Star Kernel, Kernel for the Samsung Galaxy Star
Contributors
anilsingh1605
Source Code: https://github.com/GalaxyStarPro/android_kernel_samsung_logan2g
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2
Stable Release Date: 2015-04-08
Created 2015-04-08
Last Updated 2015-04-08
Click to expand...
Click to collapse
hi, this instruction is not working for my phone. the yellow screen is still present and i've lost my imei. i've tried a lot of times to restore but it is the same thing. i don't want to flash again a stock rom
grateful that this kernel is working great after i flashed back the stock rom
thank you very much for your hardwork for making it possible for a lower end phone to be maximized regarding its capabilities. I guess it does not work with Betacore v.1.5.
God bless you
matthewjasperlo said:
hi, this instruction is not working for my phone. the yellow screen is still present and i've lost my imei. i've tried a lot of times to restore but it is the same thing. i don't want to flash again a stock rom
Click to expand...
Click to collapse
matthewjasperlo said:
thank you very much for your hardwork for making it possible for a lower end phone to be maximized regarding its capabilities. I guess it does not work with Betacore v.1.5.
God bless you
Click to expand...
Click to collapse
Looks like I did a mistake in efs-restore-signed.zip file that did not flash the efs.rfs file to efs partition. Hence it couldn't solve the problem.
I fixed the efs restore zip file and uploaded it again. Please copy the backed-up efs.rfs file to external memory card and use the fixed efs-restore-fixed-signed.zip file. Hope this will solve the problem.
Link: https://www.androidfilehost.com/?fid=95916177934554555
anilsingh1605 said:
Looks like I did a mistake in efs-restore-signed.zip file that did not flash the efs.rfs file to efs partition. Hence it couldn't solve the problem.
I fixed the efs restore zip file and uploaded it again. Please copy the backed-up efs.rfs file to external memory card and use the fixed efs-restore-fixed-signed.zip file. Hope this will solve the problem.
Click to expand...
Click to collapse
Thank you for your support and concern. I am content now in the stock rom with your custom kernel. Thank you for your generosity to s7262 users.
matthewjasperlo said:
Thank you for your support and concern. I am content now in the stock rom with your custom kernel. Thank you for your generosity to s7262 users.
Click to expand...
Click to collapse
My pleasure bro.
Update: Use Star Kernel v2 which is now available for download.
Links for Fixed version of Star Kernel, facebook group, v3 version of star kernel added.
could it work on cm10
Related
PLEASE NOTE THAT THIS THREAD IS NOT WRITTEN BY ME, THE SOLE PURPOSE OF THIS THREAD IS TO REPLACE THE DELETED THREAD THAT LEFT MANY XDA MEMBERS CONFUSED AND IN SEARCH FOR THE THREAD
This ROM is heavily updated and still being developed at a fairly rapid pace.
The update process is now very simple to do but it does require that you flash a new baseband
IF YOU ARE USING A REBELSIM AND DONT NEED WIFI TETHERING PLEASE STICK WITH V1.1.1 AS FLASHING THIS ROM WITHOUT BASEBAND WOULD CAUSE FLASHING LEDS SYNDROME - AND REBEL SIM CANT WORK WITH NEW BASEBAND AS YET
We now have a nice new website blog for streakdroid - check it out and help me populate the wiki with faqs and get in the forums sites @ http://www.streakdroid.com
Most Recent Version: v1.3.0
Known Issues:
Accelerometer is dodgy at times but i cant pin down the issue - usually going into settings > display and toggling auto rotate on and off fixes
-----------------
Changelogs
-----------------
UPDATE 15/11/2010
Version 1.3.0
Ported over A LOT of framework changes from leaked dell 2.2 build.
Front Camera Working in cam and camcorder apps (press menu to swap between)
Performance edits
Deskclock app now autolaunches on connecting to av dock.
some accell and gfx libs from dell build ported over also, may fix hdmi output as a side effect
UPDATE 04/11/2010
Version 1.2.0
WiFi Native Tethering Working
Updated Kernel Using one from Leaked Dell Froyo build
Updated WiFi Driver To one used in Leaked Dell Froyo Build- enabled tethering to work
Dropped in Dells new StageUI
Added Dell Sync By Nero from Froyo rom, not sure how its used yet though
Futher Performance Tweaks Thanks to new kernel and fards sysctl tweaks
720P Video recording support thanks to fards - may not work properly - see above in the 'known issues' area. (example video filmed by me: http://www.streakdroid.com/VID_20081206_193306.3gp)
Reset lcd density to 160 to show StageUI properly
LauncherPro 8.1.0 free version added to rom also
You can choose the launcher to use on first boot (dell,adw,launcherpro)
UPDATE 27/10/2010
Version 1.1.1
VERY Minor bugfix release to fix rotation and cpu problem in 1.1
No Wipe needed for this update as its pretty minor
UPDATE 26/10/2010
Version 1.1
No Wipe needed for this update as its pretty minor
Huge APNs list from cyanogenmod added (full wipe will be required for this to work i suspect)
Lots of speed tweaks and fixed post_boot file so cpu scales correctly
Updated ADW To 1.2.0
Added Astro file manager and Universal Androot 1.6.2Beta5 into rom
UPDATE 16/10/2010
Version 1.0
A FULL WIPE OF /DATA IS HIGHLY RECOMMENDED AFTER INSTALLING THIS TO ENSURE MARKET WORKS PROPERLY
Moved from Beta to version 1 of a release version.
Think my black theme is done, this only works in mdpi (lcd_densitys below 200)
Modified build prop and some other system files to get market working properly, all 2.2 apps are now available in market including skype etc.
UPDATE 14/10/2010
Version 0.3
Heavily modified build.prop and init scripts for performance - ~of 1400 on quadrant now and upwards of 20fps on nenamark1 and 30+fps on neocore
Added WPA_Supplicant binary with ad hoc support
Now using my own nearly fully finished black theme
Thanks to everyone for help on this build
UPDATE 11/10/2010
Version 0.2
Updated boot.img with less debugging services and hopefully should fix battery issues
Updated GPS.conf with edited version provided by users andycap and fards
Removed couple of other apps that dont work (calibrator and packagechecker)
added my newest version of build.prop
------------------
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
-------------------
Required Files
-------------------
http://build2.streakdroid.com/update-1.3.zip
http://build2.streakdroid.com/amss.mbn
-------------------
Other Requirements
-------------------
Some Common Sense
Pinch of Good Luck
Patience
Ability to read and follow instructions
Fastboot Setup and Working
ClockworkMod Recovery Flashed and working
-------------------
Level Of Difficulty
-------------------
5/10 - Mid level, should be simple enough for 95% of users to complete
-------------------
How-To
-------------
You need to be on v1.1.1(download: http://build2.streakdroid.com/update-release-1.1.1.zip) with 2.1 baseband For this to work ideally - this may work from older versions but this procedure has only been tested from 1.1.1
THIS INVOLVES A WIPE OF ALL DATA ON DEVICE SO PLEASE MAKE A BACKUP FIRST
0. Copy the update zip to your memory card first
1. Reboot streak to recovery:
do this by turning off your streak then holding down Vol up + Vol Down as you press power, keep volume keys held until you get to a menu with 4 options
2. Select the Option number 1 which is called FACTORY RESET using the volume keys to move the selection and camera to select
your streak will reboot on its own after this.
3. Allow streak to boot to ui - this will take some time
4. Power down your streak and boot into fastboot
do this by pressing power until the keypad lights come on then HOLD camera until you get to a white screen, then tap on the fastboot text in top right corner,
5. Connect your streak to pc - the text on streak should change to FASTBOOT_MODE.
you should place the amss.mbn file into the same folder as fastboot on your pc
run the following commands from command prompt on your pc
Windows:
Code:
fastboot -i 0x413c flash amss amss.mbn
Linux
Code:
fastboot flash amss amss.mbn
6. Type the following commands to reboot your streak - again alow it to boot into the main ui - you will lose network connection for the moment, this is fine, also streak WILL reboot twice before booting, again this is normal
Windows:
Code:
fastboot -i 0x413c reboot
Linux
Code:
fastboot reboot
7. Once your device has booted shut down again and boot into clockwork recovery by doing the following
boot to recovery as per step 1 then choose option 2.
8. Flash the 1.2 update zip
9. reboot
This can be rooted using universal androot but could take 2 attempts
Thanks to:
Vinokirk for helping diagnose and sort out 2.1 baseband ril support and gps
Andycap & fards for providing modified Gps.conf
homeiss forthe excellent upgrade/downgrade guide
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
hopefully thats everything
any issues theirs me and a few of my tech head irc helpers keeping an eye on the posts. or just jump in the irc channel #dellstreak on freenode for help.
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate| USD Donate
looool
http://forum.xda-developers.com/showthread.php?t=802405
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE GALAXY ALPHA [G850F] [EXYNOS]
PLEASE BE CAREFUL ... THIS RECOVERY HASNT BEEN TESTED "FULLY"...ONLY WIPE CACHE AND DALVIK CACHE , INSTALL ZIP IS TESTED
PLEASE BACKUP YOUR DATA AND MAKE SURE YOU HAVE A BACKUP OF THE FIRMWARE BEFORE PROCEEDING..HAPPY FLASHING!
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from --->
TWRP(more stable)
CWM
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy Alpha logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
a big thanx to @hensk for testing
CHANGELOG
Code:
[u][i][b][color=red]build 2[/color][/b][/i][/u]
bump to 2.8.1.0
removed config for external sd as no expandable memory
[u][i][b][color=red]build 1[/color][/b][/i][/u]
initial build
last one
exellent job m8,I already make my first nandroid backup to save my rom
now its time to find edemony to make rom for us
10ks for all dude
Wow, this is nice. Not yet ready to trip my knox but I appreciate your efforts anyway! :thumbup:
Sent from my SM-G850F
I already make my first TWRP restor,works like a charm
10ks rut
nEW BUILD IS UP!
Changelog (twrp)
build2
bump to 2.8.1.0
removed external sd support as no expandable memory on the device
rutvikrvr said:
Changelog (twrp)
build2
bump to 2.8.1.0
removed external sd support as no expandable memory on the device
Click to expand...
Click to collapse
How about backup/restore support for external usb flash drive?
neofral said:
How about backup/restore support for external usb flash drive?
Click to expand...
Click to collapse
supports usb otg ??? .. il add it
Will this work for the AT&T version in the U.S.? If not, my apologies!
Jaybell4444 said:
Will this work for the AT&T version in the U.S.? If not, my apologies!
Click to expand...
Click to collapse
what are the specs .. i mean the processor and stuff
rutvikrvr said:
what are the specs .. i mean the processor and stuff
Click to expand...
Click to collapse
Technical Specifications
Battery
Capacity1860mAh
Talk time (hours)Up to 13
Standby time (days)Up to 11.5
Dimensions
Size (inches)5.23x2.58x0.26
Weight (ounces)4.03
Processor
ChipsetQualcomm® Snapdragon™ 801
Cores2.5GHz quad-core
Memory
Internal memory storageUp to 32GB
RAM2GB
Wireless Technology
4G-LTEBands 1, 2, 3, 4, 5, 7, and 17
4GHSPA+ with enhanced backhaul
3G - UMTS850/1900/2100MHz
GSM/GPRS/EDGE850/900/1800/1900MHz
W-Fi Connectivity802.11 a/b/g/n/ac
5GHz Wi-Fi-capable
Near Field Communication (NFC)Open, Secure, Softcard compatible
Bluetooth® technologyv4.0 LE
Mobile Hotspot4Up to 10
FOTA capable - upgrade Firmware Over The Air
Operating System
Android™v4.4 (KitKat)
Display
Display size (inches)4.7
Resolution (pixels)720x1280 HD Super AMOLED®
Colors16 million
Keyboard
Touchscreen
QWERTYVirtual
Predictive text for fast typing
Backlit keys
he mean recovery.img,boot.img & build.prop from Alpha-850 snapdragon
but i think first you should "ask" Chainfire for root
after that should require help hire,this is my opinion
Jaybell4444 said:
Technical Specifications
Battery
Capacity1860mAh
Talk time (hours)Up to 13
Standby time (days)Up to 11.5
Dimensions
Size (inches)5.23x2.58x0.26
Weight (ounces)4.03
Processor
ChipsetQualcomm® Snapdragon™ 801
Cores2.5GHz quad-core
Memory
Internal memory storageUp to 32GB
RAM2GB
Wireless Technology
4G-LTEBands 1, 2, 3, 4, 5, 7, and 17
4GHSPA+ with enhanced backhaul
3G - UMTS850/1900/2100MHz
GSM/GPRS/EDGE850/900/1800/1900MHz
W-Fi Connectivity802.11 a/b/g/n/ac
5GHz Wi-Fi-capable
Near Field Communication (NFC)Open, Secure, Softcard compatible
Bluetooth® technologyv4.0 LE
Mobile Hotspot4Up to 10
FOTA capable - upgrade Firmware Over The Air
Operating System
Android™v4.4 (KitKat)
Display
Display size (inches)4.7
Resolution (pixels)720x1280 HD Super AMOLED®
Colors16 million
Keyboard
Touchscreen
QWERTYVirtual
Predictive text for fast typing
Backlit keys
Click to expand...
Click to collapse
This one is only for exynos
i just flashed build 2 and did my first ever nandroid backup on my SM-G850F :good:
thanks for your work.
since our device don't have sd card slot, i think it would be amazing if we could use the usb OTG and use external USB drives for backup/restore and flashing files. i hope build 3 will be up soon :fingers-crossed:
to use OTG will be nice & usefull,I agree
rutvikrvr said:
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
Click to expand...
Click to collapse
This will not root your device! You should give link to CF-Autoroot (find your device here: http://autoroot.chainfire.eu/#odin) and not to SuperSU!
200mpx said:
This will not root your device! You should give link to CF-Autoroot (find your device here: http://autoroot.chainfire.eu/#odin) and not to SuperSU!
Click to expand...
Click to collapse
This true? So root through zip flash not possible, need to do it with the odin contained within the chainfire zip?
Redsandro said:
This true? So root through zip flash not possible, need to do it with the odin contained within the chainfire zip?
Click to expand...
Click to collapse
I have not seen a kernel with root for instance that you can flash in recovery.
Happy
Hi,
i just flashed build 2 and it works like a charm on my SM-G850F (BNK1 Stock DBT) :good:
thanks for your work.
best regards
Code:
*** Disclaimer
I/XDA am/is not responsible for any kind of damage to your device,
or in case it explodes, your surroundings.
Please use it at your own risk!
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
Bugs :
1. Reboot->Recovery doesn't work as required. Reboots to system instead.
Please do report any, if found.
Click to expand...
Click to collapse
Download :
Recovery-TWRP_2.8.3.0u1-NK.zip
Installation :
A. With custom recovery already installed :
1. Download zip
2. Reboot to recovery
2. Install zip in recovery
3. Reboot to recovery
B. With stock recovery (Root required) :
1. Download zip & extract recovery.img
2. Move recovery.img to root of external storage
3. Open Terminal
4. (If using terminal on PC) Execute :
Code:
adb shell
5. Execute the following commands :
Code:
su
dd if=/sdcard/recovery.img of=/dev/recovery
exit
C. Through SP flash tools :
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with recovery.img from zip.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt of your phone.
5.Check only Recovery, Preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware > Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11. Disconnect your phone.
Sources :
Recovery : https://github.com/omnirom/android_bootable_recovery
Kernel : https://github.com/neomanu/NeoKernel-MT6589-A116
Device : https://github.com/neomanu/android_device_micromax_a116-twrp
Credits :
@suhas.holla (for original device tree)
NO PORT REQUESTS
NO QUOTING THE WHOLE OP
You will be reported!
XDA:DevDB Information
TWRP 2.8.3.0, Tool/Utility for the Micromax A116
Contributors
neomanu
Version Information
Status: Stable
Current Stable Version: 2.8.3.0u1
Stable Release Date: 2014-12-26
Created 2014-12-22
Last Updated 2014-12-29
Reserved
Changelog :
2.8.3.0u1 :
- Added F2FS tools. Can be used to format filesystems to F2FS.
- Removed SuperSU (to fit into partition)
2.8.3.0 :
- MTP will now tell the host PC that storage is removed instead of disabling MTP completely
- MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
- Update and improve fix permissions and make fixing contexts optional
- Update SuperSU in TWRP to 2.40 and update install process
- Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
- Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
- Fix kernel panic during MTP start on some devices
- Support unicode fonts on devices with True Type Font support
- Fix slider value not showing sometimes (vibration settings page)
- Toggle MTP off during adb sideload to set correct USB IDs
- Reduce library requirements for 5.0 L decrypt
2.8.2.0 :
-Pull in all changes from Android 5.0 lollipop into TWRP
-Add decrypt support for Android 5.0 lollipop encrypted partitions including automatic decrypt when the default_password is in use
-Revert some changes to exFAT that were breaking exFAT support on some devices
-Other minor fixes and updates
Note: At this time we do not have a GUI representation for pattern unlock. You can still decrypt patterns though by translating the pattern dots to numbers. The pattern dots correspond to numbers in the following pattern:
1 2 3
4 5 6
7 8 9
So an upper-case L would translate to a password of 14789 entered on the keyboard. Eventually we plan to add a proper pattern unlock to TWRP but it is a relatively low priority at this point.
Also note that you will need the latest adb binaries on your computer to sideload with this new version of TWRP.
2.8.1.0 :
- MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
- TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
- Temperature support - thanks to bigbiff
- Various other bugfixes and tweaks
2.8.0.1 :
- Fix a bug that caused weird graphics and touch issues
2.8.0.0 :
- Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
- Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
- Add support for color in the console and give error, warning, and highlight lines different colors
- Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
- Improve handling of /misc thanks to mdmower
- Improve setting of time on Qualcomm devices thanks to [NUT]
- Allow using images on slidervalue GUI objects thanks to Tassadar
- Allow using variables and addition and subtraction in variables for easier theming
- Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
- Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
- Other minor fixes and improvements
Over the course of the last year or so, bigbiff has worked to migrate various Java functions from Android's MTP implementation to bring you a fully C++ based MTP implementation that allows you to transfer files to both emulated storage and Micro SD cards. It's confirmed to work on various Nexus devices but we may have to make some changes on other devices to keep Windows happy. Windows is very picky about USB IDs and its drivers. We have tested it on Windows 7 and 8 as well as Ubuntu 14.04 Trusty. MTP is enabled by default, but we do toggle it off and on automatically during certain operations such as if you choose to wipe a storage partition. You can enable or disable MTP under the mount menu in TWRP. For more about what MTP is here.
Note: Due to a weird bug with our MTP setup, you cannot copy a zip file to the root of storage with Windows. You can change the .zip to something else like .txt and then copy it to the root and rename the file back to .zip once it's copied to the device. You can also copy the zip into any subfolder.
Command line support is also now available. You can perform various OpenRecoveryScript commands via the adb shell. Depending on what you are doing you may wish to do a "twrp set tw_mtp_enabled 0" and then reboot to prevent the MTP auto toggle from killing your adb interface. You can use this option to create and restore backups, wipe, install zips, and more. Via adb shell, type twrp followed by a space then enter the OpenRecoveryScript command and hit enter. Find more OpenRecoveryScript commands here.
2.7.1.0 :
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
Reserved
Awsome work bro.. :thumbup::thumbup:
Thank you so much.. Downloading
good work bro!!:good::good:
thanks for compiling this !!
Can we use this to flash Android 5.0.1 by kashifmin ?? !!
and anyway to solve reboot --> recovery problem ! ?
Awsome work once again MAN!!!!! Really, very greatful to you.... Just one more request to you...... Can you just compile a new kernel for our device from this Source (a tweaked kernel) so that we can have it on cm11.... because the kernel used in cm for now is not tweaked and a bit poor performance... i would have done that work but busy with my exams... so if you can please .. or i would be back within few weeks....
Once AGAIN , NICE WORK!! Keep it UP!!
Regards
Andy
can I flash this recovery... ?? currently I'm using AOSB ROM...
Sent from my Canvas HD
vaas kr said:
can I flash this recovery... ?? currently I'm using AOSB ROM...
Sent from my Canvas HD
Click to expand...
Click to collapse
Sure... you can with mobileuncle tools... (AND RECOVERY(S) ARE MEANT FOR FLASHING )
Regards
Andy
neomanu said:
Code:
*** Disclaimer
I/XDA am/is not responsible for any kind of damage to your device,
or in case it explodes, your surroundings.
Please use it at your own risk!
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
Tablet look:
Bugs :
Download :
Recovery-TWRP_2.8.3.0u1-NK.zip
Installation :
A. With custom recovery already installed :
1. Download zip
2. Reboot to recovery
2. Install zip in recovery
3. Reboot to recovery
B. With stock recovery (Root required) :
1. Download zip & extract recovery.img
2. Move recovery.img to root of external storage
3. Open Terminal
4. (If using terminal on PC) Execute :
Code:
adb shell
5. Execute the following commands :
Code:
su
dd if=/sdcard/recovery.img of=/dev/recovery
exit
C. Through SP flash tools :
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with recovery.img from zip.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt of your phone.
5.Check only Recovery, Preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware > Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11. Disconnect your phone.
Sources :
Recovery : https://github.com/omnirom/android_bootable_recovery
Kernel : https://github.com/neomanu/NeoKernel-MT6589-A116
Device : --to be updated--
Credits :
@suhas.holla (for original device tree)
XDA:DevDB Information
TWRP 2.8.3.0, Tool/Utility for the Micromax A116
Contributors
neomanu
Version Information
Status: Stable
Current Stable Version: 2.8.3.0u1
Stable Release Date: 2014-12-26
Created 2014-12-22
Last Updated 2014-12-26
Click to expand...
Click to collapse
I have flashed twrp recovery 2.7.00 already.. Do i need to flash it ..?
Sent from my Micromax A116
jam884 said:
I have flashed twrp recovery 2.7.00 already.. Do i need to flash it ..?
Sent from my Micromax A116
Click to expand...
Click to collapse
No, you don't.
And everyone, please refrain from quoting the whole OP, and specially no port requests.
Both will be reported immediately.
jam884 said:
I have flashed twrp recovery 2.7.00 already.. Do i need to flash it ..?....
Click to expand...
Click to collapse
neomanu said:
No, you don't. .....
Click to expand...
Click to collapse
you mean there's no tangible benefit of using v2.8.3.0u1 if one's already running v2.7.0.0?
m0han said:
you mean there's no tangible benefit of using v2.8.3.0u1 if one's already running v2.7.0.0?
Click to expand...
Click to collapse
I'm saying that if someone is going to ask such questions after such a lengthy changelog has been posted, they might as well not.
neomanu said:
I'm saying that if someone is going to ask such questions after such a lengthy changelog has been posted, they might as well not.
Click to expand...
Click to collapse
your twrp v2.8.3.0u1 seems to work ok :good:.backup got saved in /emmc/TWRP/BACKUPS/Canvas_HD. how about shortening that to A116?
on another note, i'd like to have the font you've used in your recovery, on twrp v2.8.2.0 for xolo q3000. can you help in any way? thanks.
m0han said:
on another note, i'd like to have the font you've used in your recovery, on twrp v2.8.2.0 for xolo q3000. can you help in any way? thanks.
Click to expand...
Click to collapse
The font used is the new default in TWRP, from v2.8.1.0.
Refer to this commit.
All you need to do is to unpack the ramdisk, add RobotoCondensed-Regular.ttf to /res/fonts/ and change the following in /res/ui.xml according to the required resolution.
Repack and you have the font.
neomanu said:
No, you don't.
And everyone, please refrain from quoting the whole OP, and specially no port requests.
Both will be reported immediately.
Click to expand...
Click to collapse
In my twrp 2.7.0.0 it shows wipe option with dalvik,cache,factory reset..in single swipe.. What should i do to separate them..
Sent from my Micromax A116
jam884 said:
....What should i do to separate them....
Click to expand...
Click to collapse
try clicking advanced wipe and choosing what you need....
m0han said:
try clicking advanced wipe and choosing what you need....
Click to expand...
Click to collapse
Thanx a lot friend...
Sent from my Micromax A116
@neomanu
Thanks for TWRP_2.8.3.0
I have one issue some time stuck when flash zip on TWRP_2.8.3.0u1-NK
When flash same zip in preview recovery (TWRP 2.8.0.0 hyperion70) it work fine
any news on an update to fix the boot to recovery option ??
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Download Links
Androidfilehost:
Download: https://www.androidfilehost.com/?fid=24391638059057759
Google Apps Minimal Edition:
Download: http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
Installation
1.) You must have twrp installed follow this guide here
2.) Download the ROM and Gapps and place them on internal or external storage (depending on your model you may only have internal storage)
3.) In TWRP navigate to "Wipe" and wipe cache, data, and dalvik
4.) In TWRP navigate to "Install" find the location of the downloaded zips and proceed with installation
5.) Once both ROM and Gapps have been successfully flashed reboot system and wait for the device to boot
XDA:DevDB Information
CyanogenMod 12.1 for Alcatel ONETOUCH IDOL 3 5.5, ROM for the Alcatel Onetouch Idol 3
Contributors
Unjustified Dev
Source Code: http://github.com/TeamRegular
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2015-10-14
Last Updated 2016-01-28
Status
Working:
Radio (Includes Dual Sim, Data and SMS)
Sound
Camera
BT
Sensors
Wifi
Known Issues:
Please share your bug reports (include a log if possible)
Tap to wake (Works, but disables itself randomly)
Horrendous battery drain
Changelog
20160218
remove unneeded qcom usb script
disable boot freq limit for cluster
20160216
Updated prima driver to LA.BR.1.1.3_rb1.45
Updated kernel to LA.BR.1.1.3_rb1.45
add back various alcatel kernel changes
set usb properties on boot (Fix the usb product model defaulting to Android)
set variant from init and add support for I806 (pivoq)
selinux enforcing (wcnss fixes by pivoq)
add peripheral manager
wcnss: restore stock config
20160128
update storage configuration (fix internal storage access)
don't set tct properties
set taptowake control state to 2
remove window cover support (revisit later)
remove unused zram script
remove tct cmdline garbage
remove unused hdcpService
remove power engine
remove powerup reason
remove unused Tct Daemon
disable secure discard
remove camera wrapper
use half res bootanimation
update WCNSS cfg from firmware bin
Stop the QC-QMI message spam
switch to init.qcom.power and update devfreqs
add script to identify device variants
switch to new cm-12.1 kernel
update adreno blobs
FAQs
Q: Is the device fully reversible on CyanogenMod as well?
A: Unfortunately no, it does allow all rotations but the dialer app currently will not allow you to place calls upside down.
Q: Does Dual Sim work with this ROM?
A: Dual Sim devices are now supported
Q: Why is my device 6045X?
A: The script failed to identify your device the supported model are 6045I, 6045B, 6045K, and 6045Y
Q: How can I get my device supported?
A: Post the model number and stock build.prop
Q: Is the Aero flipcase supported on CyanogenMod?
A:At the current moment it is not supported
Good News! Any plans for supporting 4.7 version aswell?
Is your device tree based on a similar device like yu tomato oder something, could you give me some hints for setting it up?
salzy said:
Good News! Any plans for supporting 4.7 version aswell?
Is your device tree based on a similar device like yu tomato oder something, could you give me some hints for setting it up?
Click to expand...
Click to collapse
No plans at the moment. There's is already someone handling 4.7 variants. Check out the CM port thread for details.
w00t!!!!!
Sent from my 6045I using Tapatalk
Like a kid on Christmas Eve. Waiting for what's to come. Can't wait to see future progress on this. I would give this a shot but WiFi and MMS are like my main two necessities. Thanks to all of those involved on this port for making this happen.
So close but yet so far.. I was so hyped when saw the thread but got down to earth quickly.. Stay focused my man, you're about to make something that's good into the great..
Just wondering if cm have some incompatibles with root apps like greenify, Viper 4 Android? Thank you
Sent from hell
Did you get the kernel to boot building from source or are you still repacking with stock?
Sent from my 6045I using XDA Premium HD app
brian117 said:
Like a kid on Christmas Eve. Waiting for what's to come. Can't wait to see future progress on this. I would give this a shot but WiFi and MMS are like my main two necessities. Thanks to all of those involved on this port for making this happen.
Click to expand...
Click to collapse
It's close. Just seeing how fast @Unjustified Dev has progressed to this point has been impressive.
Great Great Great my idol trembles park in the pits ready to receive new engine.
make sure everyone to get the minimal gapps as 5.1 before download
Whoohoo! so excited haha.
One wonders why use those minimal gapps rather dated instead of gapps latest? On motog 2014 Cyan 12.1 latest release give FC using ones you reported.
While Cyanogen recommends these:deleted
masterdex said:
One wonders why use those minimal gapps rather dated instead of gapps latest? On motog 2014 Cyan 12.1 latest release give FC using ones you reported.
While Cyanogen recommends these:http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Click to expand...
Click to collapse
They worked fine for the testers. I'm sure those gapps would cause issues because they aren't 64 bit compatible.
Unjustified Dev said:
They worked fine for the testers. I'm sure those gapps would cause issues because they aren't 64 bit compatible.
Click to expand...
Click to collapse
Then I immediately delete the link to avoid problems.
My ADB is ready.
will it be regular flash or aroma installer?
masterdex said:
Then I immediately delete the link to avoid problems.
My ADB is ready.
Click to expand...
Click to collapse
CyanogenMod
https://www.androidfilehost.com/?fid=24052804347837558
Bootimg with adb enabled
https://www.androidfilehost.com/?fid=24052804347837588
Flash cm then the boot.img can be done from twrp or fastboot.
To keep it from crashing we need to remove the wlan module
adb remount
adb shell rm -rf /system/lib/modules/wlan.ko
technically you could do that from twrp without ever flashing the boot.img by mounting system after installing cm and using the included twrp file manager
Unjustified Dev said:
CyanogenMod
https://www.androidfilehost.com/?fid=24052804347837558
Bootimg with adb enabled
https://www.androidfilehost.com/?fid=24052804347837588
Flash cm then the boot.img can be done from twrp or fastboot.
To keep it from crashing we need to remove the wlan module
adb remount
adb shell rm -rf /system/lib/modules/wlan.ko
technically you could do that from twrp without ever flashing the boot.img by mounting system after installing cm and using the included twrp file manager
Click to expand...
Click to collapse
Ok I'm downloading.
Then install cm after bootloader and still gapps and after I disable the WiFi with ADB or leave everything as it is?
masterdex said:
Ok I'm downloading.
Then install cm after bootloader and still gapps and after I disable the WiFi with ADB or leave everything as it is?
Click to expand...
Click to collapse
You can flash gapps before and the boot.img isn't needed flash cm and gapps. Once they are done mount system and use the file manager to remove wlan module and that's it reboot and everything should be fine.
i9100 LineageOS 11.0 - ABANDONED
LineageOS (as well as CM did until December 2016) still maintains the cm11.0 / 4.4.4 sources to keep pace with 'The Android Security Bulletin' (ASB).
https://source.android.com/security/bulletin/index.html.
Patches for CVE security issues are released at least once a month to the Android Open Source Project (AOSP) repository.
Patches for Android 4.4.4 are not provided by ASB anymore.
This means, security wise Android 4.4.4 is formally dead.
Nevertheless there are a few enthusiasts, still backporting security patches from recent Android versions to 4.4.4.
You should know, such backports are no formal ASB security patches.
Therefore the security patch level of this ROM is named: Unofficial Security Backport "December 2019".
Despite of implementing these security patches by the LineageOS team to its own repository https://github.com/LineageOS, LineageOS does not provide cm11 builds anymore.
Since I personally like 4.4.4. more than later versions, I build it myself unofficially and would like to share it.
The build is made from LineageOS "Branch: cm-11.0" PLUS ASB security patches, even if they are not yet approved by LineageOS.
The main goal of this ROM is to provide up to date builds in terms of ASB security patches, not development.
Instructions:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
First time flashing cm11.0 your device, or coming from another ROM
- download the zip
- install a compatible recovery (TWRP 3.1.0, cwm 6.0.5.1 are ok)
- perform a recovery backup of your current ROM
- flash ROM
- wipe data & cache partitions of your device
- optional: install the Google Apps addon package
Code:
Install lineage-11 on i9100 coming from any ROM (long way)
===============================================
0 Downloads [URL="https://androidfilehost.com/?w=files&flid=298277"]AFH folder with all downloads
[/URL]~~~~~~~~~~~
phone USB drivers
"SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
odin
"Odin3 v3.13.1.exe"
Stock-ROM JB
"I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md 5"
Heimdall
"heimdall-suite-1.4.0-win32.zip"
'ROM lineage-11 for i9100'
"lineage-11-20190714-UNOFFICIAL-i9100.zip" or any other lineage-11 ROM
TWRP for i9100
"twrp-3.1.0-0-i9100.img"
NOTE: more recent versions of TWRP won't work in step 3
1 Install Stock-ROM JB
~~~~~~~~~~~~~~~~~~~~~~
Installing Stock-ROM JB shall ensure a clean start.
1.1 PC
install drivers "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
1.2 Phone
* boot to BootLoader (hold: Vol-Down + Home + Power)
* confirm with Vol-Up
* connect to PC
1.3 PC
execute "Odin3 v3.13.1.exe"
* in 'Log' you must see a device
* select checkbox AP
* select file "I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md 5"
* Start
* watch progress until success
1.4 Phone
In the highly probable case of a bootloop on 1st start:
* boot to recovery (hold: Vol-Down + Home + Power)
* execute factory reset
* reboot system
Now Stock-ROM JB should be installed and working.
1.5 Phone
for later usage copy "lineage-11-20190714-UNOFFICIAL-i9100.zip" to Download folder
2 Install Heimdall
~~~~~~~~~~~~~~~~~~
2.2 Phone
* boot to BootLoader (hold: Vol-Down + Home + Power)
* confirm with Vol-Up
* connect to PC
2.2 PC
* extract "heimdall-suite-1.4.0-win32.zip" & navigate to the location of 'heimdall.exe'
Remark: use a folder on the PC's HDD, it didn't work for me when using a USB-Drive
* follow 'Driver Installation Instructions' in README.TXT (switches USB driver with zadig.exe)
* check connection to phone via 'heindall.exe detect'
--> must show 'Device detected'
3 Install TWRP & LOS
~~~~~~~~~~~~~~~~~~~~
3.1 PC
* extract 'ROM lineage-11 for i9100'
* copy 'boot.img' to the folder containing 'heimdall.exe'
* copy "twrp-3.1.0-0-i9100.img" to the folder containing 'heimdall.exe'
* open cmd.exe in the folder containing 'heimdall.exe'
* execute "D:\S2\Heimdall\build\bin>heimdall flash --KERNEL boot.img --RECOVERY twrp-3.1.0-0-i9100.img --no-reboot"
* watch progress until 'Releasing device interface...'
3.2 Phone
* pull out the USB cable
* hold the power button until screen is off (> 8s)
* boot to Recovery (hold: Vol-Up + Home + Power)
* goto Wipe
* goto Advanced wipe --> select Dalvik, Cache, System, Data
* swipe to Wipe
* goto TWRP Install
* navigate to Download folder from 1.5
* select "lineage-11-20190714-UNOFFICIAL-i9100.zip"
Remark: Do not install gapps together with ROM, SUW will crash and ROM is not usable.
* swipe to confirm flash
* reboot System
* configure the just installed ROM
* Optional install gapps:
reboot to recovery
install gapps
reboot system
Download:
<< latest 2019/12/24 >> Unofficial Security Backport "December 2019"
AndroidFileHost
older downloads
Included:
LineageOS per 2019-12-24 status merged at LineageOS
LineageOS per 2019-12-24 status open at LineageOS topics asb-2019.12-cm11
Note
The stock browser is removed from this ROM due to severe security issues, which cannot get fixed.
Get a state of art browser (like firefox) from play store instead.
Known Issues:
xposed not supported
1) A fix is provided by Lenny Bard, see instructions at post here.
2) Fix by lee.wp14. See post https://forum.xda-developers.com/showpost.php?p=79618987&postcount=243.
Download: lineage-11-20190609-UNOFFICIAL-i9100-xposedReady.zip
Be aware, these two fixes might break some security patches.
video in browser fix, thanks to TriboDoP:
https://forum.xda-developers.com/showpost.php?p=70266718&postcount=142
gapps
Paddy's found out, that latest gapps may cause trouble.
Fix: open_gapps-arm-4.4-pico-20161006
Credits:
LineageOS
xpduyson - ASB patches
Tim Schumacher - ASB patches + KRACK patches
mse1969 - ASB patches
Android-Andi - security patches
syphyr - security patches
Hi @grzwolf
That's great!
Thank you very much for building kitkit with latest security patches!
Regards
TriboDP
Sent from my ME173X using XDA-Developers Legacy app
Hi @grzwolf,
It may be an old version of Android, but its a new and updated build... thanks for keeping this cm/los 11 up to date and giving us more options....
Thanks, Lister
Nicee
how is battery life?
Thanks for the good work :good:
Just wanted to note that the bugs here are the same as slimsaber ROM bugs.
Highlights:
1- pixelated YouTube videos.
2- no 480p video quality in YouTube videos
3- no Xposed support.
MigoMujahid said:
Thanks for the good work :good:
Just wanted to note that the bugs here are the same as slimsaber ROM bugs.
Highlights:
1- pixelated YouTube videos.
2- no 480p video quality in YouTube videos
3- no Xposed support.
Click to expand...
Click to collapse
3 - Xposed: you may try this: https://forum.xda-developers.com/xposed/xposed-android-4-4-4-t3249895/post72401950#post72401950
This ROM has brought my S2 back to real usability. I have tried many nougat ROMs with varying results but all were so laggy and unresponsive. This is like a breath of fresh air.
cexcells said:
This ROM has brought my S2 back to real usability. I have tried many nougat ROMs with varying results but all were so laggy and unresponsive. This is like a breath of fresh air.
Click to expand...
Click to collapse
Exactly
Older is always better, because the systems in newer android versions use too much ram, and leave you with less than 25% of free ram(in our case), if you went back to cm10 or cm9, your phone will get smoother, the problem is that those versions are so old now and almost unsupported by apps and games of today, so you are forced to upgrade your phone or upgrade your android.
mhl is working? thank you
edit: sorry, I had thought to read based to 4.1.2
I installed the build with TWRP 3.1.0 and works great!
yes, I have tried many new 7.x roms and the s2 becomes very very very slow and laggy (strange because with an old motorola moto g first edition, android 7.x porting are very fast). nowadays the only use for a s2 is that as mediaplayer (kodi, acetream, live stram player etc.) with mhl cable... pity that one is forced to used stock or stock modified rom...
This ROM is really fast and all.
How did you solve the Camera and Gallery problem?
When opening Gallery it needs external storage.
I have repartitioned my S2 as follows:
System 1.5GB
Data 6GB
Internal Storage 6GB
Thx
DragonZeal said:
This ROM is really fast and all.
How did you solve the Camera and Gallery problem?
When opening Gallery it needs external storage.
I have repartitioned my S2 as follows:
System 1.5GB
Data 6GB
Internal Storage 6GB
Thx
Click to expand...
Click to collapse
That's a wide field, surely not a Gordian knot to solve. I don't do anything but occasional cleanups.
mostly too much camera/gallery garbage: --> settings, apps, all, App info, clear data/cache
sometimes too many leftovers from uninstalled apps: requires CAUTION and a root file explorer
could be a corrupted SDcard, which needs a reformatting/replacement
I will give a try right now!
grzwolf said:
That's a wide field, surely not a Gordian knot to solve. I don't do anything but occasional cleanups.
mostly too much camera/gallery garbage: --> settings, apps, all, App info, clear data/cache
sometimes too many leftovers from uninstalled apps: requires CAUTION and a root file explorer
could be a corrupted SDcard, which needs a reformatting/replacement
Click to expand...
Click to collapse
I'm experiencing this on 2 i9100 with different MicroSD Card.
I don't want to root.
This is a problem that came with KitKat.
If somebody knows a fix please let me know.
You said you only used LineageOS repositories. So you did not include TRIM and Isorec in this ROM? Do we need to install a custom Kernel to have these features?
LeBourrin said:
You said you only used LineageOS repositories. So you did not include TRIM and Isorec in this ROM? Do we need to install a custom Kernel to have these features?
Click to expand...
Click to collapse
Hi
LOS 11 has isorec.
I do not remember if it has trim as i am not on kitkat at the moment.
Sent from my ME173X using XDA-Developers Legacy app
TriboDoP said:
Hi
LOS 11 has isorec.
I do not remember if it has trim as i am not on kitkat at the moment.
Sent from my ME173X using XDA-Developers Legacy app
Click to expand...
Click to collapse
Both implemented, check commits in cm11 branch from March 2016:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commits/cm-11.0
IsoRec:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commit/f92a06b7d28586ceac5526d8669dbc44c0df9dab
Trim:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commit/197f54cdbc99458d07e99d732b72d9e391aa7fc3
Is there a recommended way to play video files on this ROM?
cexcells said:
Is there a recommended way to play video files on this ROM?
Click to expand...
Click to collapse
Why should there be any?
MXplayer or VLC are anyway the only worth alternative I know.
In other news, just a friendly remainder that for as much lineage got up to July patch level, they are still missing the (unavailable) CVE-2017-0671 fix