Can we make an updated version / quick recap of the HOW-TOs? - XPERIA X10 Q&A, Help & Troubleshooting

There are so many topics on how to root, flash and install the X10, but they're all pretty old and most of them are based on Sony PC Companion, that, as far as I know, isn't available for Linux.
I am guessing that people who are upgrading their X10s to the newest FeraLab versions can do the entire procedure in the blink of an eye. So can you please help me make a quick checklist of the required steps? I'll dig on my own for all the details required by each step.
I just need a "structure" to follow. Let's say a "broader view".
A few days ago I've received an X10i with Android 2.3.3. running on it.
It hasn't been rooted.
How can I check if the bootloader is locked or not?
Note: I've no data to backup on the phone. It's all in its factory default settings with no content on it.
I've downloaded and I'm currently running the latest version of Flashtool on Arch Linux (64bit). It works.
I've also download FeraLab Kernel v28-beta4.
Then I've FeraLab Firmware v40. I couldn't get the latest version (v40.2) since the uploaded.net link doesn't work, at least not for me.
Now, this is what I came up to after reading the most recent threads that I've found here.
Please correct me if I am wrong.
1) Should I click on the "Flash device" icon (top left) and then "flash" the .ftf file of the FeraKernel?
2) Should I "push .ko files to /system/lib/modules/" and restart?
3) Now should I install the v40 ROM using the same procedure of step 1)?
4) In order to do that I think I've to follow FeraVolt steps, right?
-> Boot-up to CWM6 Recovery & just straightly install ROM following AROMA installation wizard.
-> After installation, boot your phone, pass setup wizard and wait 2 minutes. Reboot again.
-> On second boot wait not less than 2 minutes again & reboot.
-> Done. Do a reboot after you've configured your phone. Hit 'Thanks' button and rate this thread if you like my work or consider donating me to let me to have a good dinner.
Am I about to follow the right steps? Or am I doing something wrong?
What about rooting the phone and unlocking the bootloader?
Thanks for helping a n00b!

First, download both the rom and kernel. Put the rom on your sd-card and the kernel (.ftf) inside the firmware folder in flashtool.
Root the phone, then flash the kernel, and from the recovery instal the new rom (don't forget to make a backup first).
Hope this clears it up a bit.
Sent from my KIS PLUS using Tapatalk 2

Related

WT19i Beginner

Hello XDA Members!
I just changed from galaxy mini to sony ericsson live with walkman.
The phone comes just out of the box.
It has android 2.3.4 installed with sony ericsson firmware 4.0.1.A.0.283.
So what do i want to achieve with my new phone?!
1. root acces
2. update firmware to 4.0.2.A.0.62
3. install cwm to use it later for installing other roms
4. flash a new kernel to use link2sd and move apps to sd-ext like on my mini.
So anybody out here willing to give me hints to achive the above mentioned points?
As i am from germany the phone offers me an upte to 4.0.A.0.69! Is it possible to maintain the above achievments with this update?
Thx for any support!
hi and welcome to the sony world!!!
so first let me ask you a basic question is your phone branded sim locked??
Thx for welcome.
No the phone isn't branded / sim locked.
Its a stock sony phone which i bought from amazon here in germany.
Great then the easiest way to root it is a custom kernel rom.
So first you will need to unlock your bootloader; you can do it in two ways:
1.- the offical way here http://unlockbootloader.sonymobile.com/ you will lose drm and be unable to use the official track id app from sony.
2.- the test point method here http://forum.xda-developers.com/showthread.php?t=1285285 you will not lose drm and track id and be able to update your phone with seus no problem. in this video http://www.google.com.mx/url?sa=t&r...tMG1Bg&usg=AFQjCNFe_MgteNSvfQYkgBoh7rwpwSVoAQ it shows you what points to use and you can do it with a paper clip it seems hard to do but it is pretty easy.
Take into account unlocking your bootloader will void warranty and may cause damage to your phone bla bla bla. You know the same thing from always.
i think this is the first step if you do it and need more help let us know or if you don't want to let me know and i will point you to some good threads for modding your phone without unlocked bootloader.
ginryu said:
Great then the easiest way to root it is a custom kernel rom.
So first you will need to unlock your bootloader; you can do it in two ways:
1.- the offical way here http://unlockbootloader.sonymobile.com/ you will lose drm and be unable to use the official track id app from sony.
2.- the test point method here http://forum.xda-developers.com/showthread.php?t=1285285 you will not lose drm and track id and be able to update your phone with seus no problem. in this video http://www.google.com.mx/url?sa=t&r...tMG1Bg&usg=AFQjCNFe_MgteNSvfQYkgBoh7rwpwSVoAQ it shows you what points to use and you can do it with a paper clip it seems hard to do but it is pretty easy.
Take into account unlocking your bootloader will void warranty and may cause damage to your phone bla bla bla. You know the same thing from always.
i think this is the first step if you do it and need more help let us know or if you don't want to let me know and i will point you to some good threads for modding your phone without unlocked bootloader.
Click to expand...
Click to collapse
That was only about unlocking bootloader, which is needed if you want to install custom kernel and/or ROM.
For rooting, I have written a tutorial to root, http://forum.xda-developers.com/showthread.php?t=1568792. First root your phone and then make Over the Air update(directly from phone via 3G or WiFi) to newest firmware(which is .69 in your case).
Root will stay if you do OTA update, PC Companion/SEUS will remove root.
Also CWM installation is included in my tutorial.
Installing custom kernel is not yet in tutorial, but I will explain here.
First unlock bootloader like written in previous post. Then download the kernel you want, you will need .img file. Next, if you don't have it yet, then download Android SDK, because you will need fastboot. Move the .img file to the same folder as fastboot(C:\...\android-sdk\platform-tools), start Command Prompt, enter the following command
Code:
cd C:\...\android-sdk\platform-tools
and then
Code:
fastboot.exe flash boot boot.img
Replace C:\...\ part with the path to android-sdk directory and boot.img with the correct file name. Mostly it is boot.img, but can be different on some kernels.
thx, again a member willing to help my!
So happy.
I wont to do anything wrong. As you explained i first should root the phone and then install the latest firmware.
So i downloaded this file DooMLoRD_v4_ROOT-zergRush-busybox-su.zip.
This will do the following
[*] This script will:
(1) root ur device using latest zergRush exploit (21 Nov)
(2) install Busybox (1.18.4)
(3) install SU files (binary: 3.0.3 and apk: 3.0.6)
The text goes on with
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
(6) skip "PC Companion Software" prompt on device
I am confused and blind
Where can i find the adb drivers?
just install pc companion and it will install the drivers for you once you connect your phone for the first time that's all.
ginryu said:
just install pc companion and it will install the drivers for you once you connect your phone for the first time that's all.
Click to expand...
Click to collapse
Just googled
Thats the software i get for example from sony page hxxp://www.sonymobile.com/de/tools/pc-companion/ .
Am i right?
If so, then i am ready to root my live with walkman. Finally
yep you are right
Yeah got it!
Superuser is in list for apps.
Now i will start the firmwareupdate ota.
New question again
Why can't i connect to my fritzbox via wlan without my simcard plugged in? I get an error out of reach. If i put my simcard in, i can connect to my router.
My old mini didnt bother if the simcard isn't plugged it.
It still connects to the router.
never heard of anything like it. maybe it's a bug of the firmware?
Update
Firmware 4.0.2.A.0.69 installed, Superuser still there.
So what should i do next?
motorazrv3 said:
Update
Firmware 4.0.2.A.0.69 installed, Superuser still there.
So what should i do next?
Click to expand...
Click to collapse
You should install cwm from here http://forum.xda-developers.com/showthread.php?t=1345741
What about this link http://forum.xda-developers.com/showthread.php?t=1346190 using se extreme tweaker.
Should do the same and i find it easier to handle.
motorazrv3 said:
What about this link http://forum.xda-developers.com/showthread.php?t=1346190 using se extreme tweaker.
Should do the same and i find it easier to handle.
Click to expand...
Click to collapse
man i forgot about that one, yeah you are right and the bravia engine works like a charm too.
Success
Managed to enter cwm
Cwm displays "CWM-based Recovery v5.0.2.7-nAa"
Hope that is the latest one.
yeah it is well there is a 5.5 version but i have only seen it in 1 custom kernel, by the way don't try to flash any custom rom with it or you will have trouble ok.
Enough for today.
Here in germany it is 8pm (twenty o'clock).
Time to chill now.
Thank you very much to my 2 supporter helping me managing the first steps.
Hope you can help me again when i go on.
Wlan still not working without simcard inserted. Any Ideas what could be the problem or is that a normal behaviour?
ginryu said:
yeah it is well there is a 5.5 version but i have only seen it in 1 custom kernel, by the way don't try to flash any custom rom with it or you will have trouble ok.
Click to expand...
Click to collapse
Yeah if i understood right, i have to unlock bootloader first flashing a custom rom.
But now with cwm installed i am able to backup my rom and restore it if i need, am i right?
On galaxy mini we werent able to back up the stock rom via cwm.
yep you are right. As of the odd thing with the wifi and the sim still no ideas.

[GUIDE][HOW-TO] Flashing a Custom ROM

Before I begin, Mods, PLEASE pin this. I (when I was a noob) had absolute difficulty installing ROMs. This is very noob-friendly, fixes Status 7 errors, and is easy to follow.
Alright friends and future flashers. I used to have difficulty installing ROMs. Now that I know how (after going through numerous tutorials), I'd like to make it easy for ALL of you. Enjoy your Custom ROM!
Before beginning, you need Android's SDK,Flashtool and The latest Official firmware.
If ever your phone needs to install drivers, let it install, don't unplug the phone or whatever.
And, battery at least 30%. Mine does it at even 20% without issues, but just to be safe.
Step 1: Revert to Stock
You don't need to downgrade. After flashing the latest stock kernel, I have flashed every single GB and ICS ROM in existence without issues, so you don't need to flash a specific one. But, latest one tends to be more stable. Here's what you do:
Get the latest Global ftf for your phone. Then, flash it using Flashtool. I won't go into specifics, but PM me if needed
By Now, you should have a stock EVERYTHING. Boot up the phone, run through the whole set up process. Once you are done, you need to get your IMEI number. Do this by following the steps here.
In the end, you should have the bootloader unlocked. If you come up with something like bootloader already unlocked, then you are good to go. Now onto......
Step 2: Preparing your Flash.
Download the ROM of your choice. I'd recommend FXP's Unofficial CyanogenMod9 as it has the best stability and no ICS Multitouch issues. If it is GB, any ROM will do. Most of them are stable.
Now, in the case of CyanogenMod, they often come with their own custom Kernel. It is in the zip file, known as boot.img, and you simply extract it to your platform-tools folder in the android-sdk folder you downloaded to unlock the bootloader. This is also true for some MIUI ROMs I've come across. Read their forum posts for more info on which kernel to use.
Copy the ZIP file to your sdcard. It does not have to be the root of SDcard, anywhere will do.
By the end, your Custom ROM's ZIP file will be in your SDCard, and the kernel file (a.k.a. boot.img or whatever_the _kernel_name_is.img) will be here:
32bit Windows: C:/Program Files/Android/android-sdk/platform-tools
64bit Windows: C:/Program Files(x86)/Android/android-sdk/platform-tools
Now we can
Step 3: Flash your Custom ROM
In the folder above (depending on OS version) press Shift+RightClick. Options will show up. Select "Open Command Prompt Here". A Command Prompt will open (duh).
Turn off your phone. Wait 10 seconds. While plugging in your phone, press the Menu button (the Right button). The LED Indicator should turn blue. This shows your in fastboot mode. If it starts to boot, rip out the battery and try again. DON'T STOP PRESSING UNTIL IT TURNS BLUE.
Now, type EXACTLY AS FOLLOWS, ONE AT A TIME. Just type in the lines with the "-" before it, but don't put in the "-" when typing it. The line underneath in brackets is an explanation, so you understand what is happening.
-fastboot devices
(This is actually a quick test I do to see if my phone is connected in flash mode or not. If nothing happens, it is not in flash mode or the drivers are installing)
-fastboot flash boot boot.img
(This is telling fastboot to FLASH the BOOT partition of your phone with the file specified. If you are using a different kernel, simply replace boot.img with the name of the kernel, ending with .img and wait for it to finish. Won't take long)
-fastboot reboot
(This causes the phone to reboot)
Now, while it is starting up, keep repeatedly pressing the Volume Down button until you are in ClockWorkMod Recovery (Assuming you are using it. CWM is the most popular and most kernels use it) Then, If you choose to, make a backup. I personally don't, as it is not too big an issue and I never revert to an old ROM anyway.
After that, choose Factory Reset. This will remove ALL data in your phone except your Stock ROM. Then, Clear Cache. You might've noticed it already did that when you Factory Reset, but this is for safety. Finally, in advanced, Wipe Dalvik-Cache and Wipe Battery Stats. I do this all the time for safety.
Now, the fun bit. GO to Install ZIP from SDCard. Select Choose ZIP, find your ROMs ZIP file, and install. It might take awhile, but not too long. Just be patient. When it finishes, flash anything else the ROMs forum post says to flash (Gapps, Patch, etc) and select Reboot Phone.
Step 4: Done!
Your phone will start up. First time is always slow, but this WILL WORK. Congratulations. You now have a Custom ROM
If you get a Status 7 error while flashing a ROM, reboot recovery and wipe everything again. If that doesn't work, flash official firmware and try again.
Credits to:
-Google: Providing Android SDK and Gapps
-Androxyde: Flashtool
-Madfysh: List of Official ICS ROMs
FXP: Creating CyanagonMod9
-And YOU!
P.S.: If you're confused, or feel this could use something extra PM me.
And uh, if it needs to be moved, please do so. Thanks!
I do know there is THIS but I felt some of his steps were unnecessary. Example, rooting. Any custom ROM will be rooted, so there will be no need to worry about that. And he also provided overclocking tips and an unofficial bootloader unlock which are hazardous and potentially permadamaging to the phone.
PLEASE Don't spoil the mood man!!
This is a development section where even Noob Devs know how to flash a Custom Rom!! PLeaseee Pleaseeee ... Move it
Alright man. How would I move it? Cause, I only RECENTLY started being active on the forums.
Jass5991 said:
I do know there is THIS but I felt some of his steps were unnecessary. Example, rooting. Any custom ROM will be rooted, so there will be no need to worry about that. And he also provided overclocking tips and an unofficial bootloader unlock which are hazardous and potentially permadamaging to the phone.
Click to expand...
Click to collapse
Don't say that thread is unnecessary; they put everything in one thread cause it's easy to find. the first step we should do is rooting if we are noops. Then we will be curious about unlock or custom rom later.
Sent from Xperia Neo using AOKP B40
Still dev thread so if you don't know how you should not be trying
It goes like this no dl link no thread
but still is a good post
some unnecessary parts
some dodgy parts
But good for noob never-ending Questions
Maybe Q&A
Reck1993 said:
Don't say that thread is unnecessary; they put everything in one thread cause it's easy to find. the first step we should do is rooting if we are noops. Then we will be curious about unlock or custom rom later.
Sent from Xperia Neo using AOKP B40
Click to expand...
Click to collapse
Okay. I will add an easy rooting instructions to it.
kormatoes said:
Still dev thread so if you don't know how you should not be trying
It goes like this no dl link no thread
but still is a good post
some unnecessary parts
some dodgy parts
But good for noob never-ending Questions
Maybe Q&A
Click to expand...
Click to collapse
Thanks kormatoes. Could you gimme some of the unnecessary/dodgy parts?
Jass5991 said:
I do know there is THIS but I felt some of his steps were unnecessary. Example, rooting. Any custom ROM will be rooted, so there will be no need to worry about that. And he also provided overclocking tips and an unofficial bootloader unlock which are hazardous and potentially permadamaging to the phone.
Click to expand...
Click to collapse
1) actually that(which you linked) tutorial is good, it just need some updating. but your tutorial is different than that.
2) root is certainly not unnecessary! not all people will go for custom roms, specially as most of them are for unlocked BL.
3) unofficial unlock is not hazardous, it is tricky, but it paid of if we look on the advantage against official unlock
Nice from you that you wrote all this, it's based only for custom roms's, thread which is already sticked is for basic things, which any noob should know.
But still, this looks kinda cluttered, and from noob(which you intend this to) point of view, to long/complicate to read
Madfysh said:
1) actually that(which you linked) tutorial is good, it just need some updating. but your tutorial is different than that.
2) root is certainly not unnecessary! not all people will go for custom roms, specially as most of them are for unlocked BL.
3) unofficial unlock is not hazardous, it is tricky, but it paid of if we look on the advantage against official unlock
Nice from you that you wrote all this, it's based only for custom roms's, thread which is already sticked is for basic things, which any noob should know.
But still, this looks kinda cluttered, and from noob(which you intend this to) point of view, to long/complicate to read
Click to expand...
Click to collapse
Thank you all big guns
but there should be a start-up kit for newbie
There can be a Starter Section with due permission
lalit387 said:
Thank you all big guns
but there should be a start-up kit for newbie
There can be a Starter Section with due permission
Click to expand...
Click to collapse
As it is, I am attempting to code a batch file to automatically run the entire flashing process, including kernel and ROM. Having a small issue where it does not wipe dalvik and cache. It also doesn't flash the custom ROM

[Tutorial] Installing Cyanogen Mod 7.2.0 on Live With Walkman WT19i

This is my first tutorial for installing Cyanogen Mod 7.2.0 on Live With Walkman WT19i. All credit goes to the developers who made all the following and related tools. I simply put together info from various sources. Admins/moderators are welcome to make any changes.
WARNING: Proceed at your own risk! I am not responsible for bricked phones! You might want to do some more research if you're unsure or don't fully understand anything from below
Requirements: ADB drivers:
http://www.mediafire.com/?6u1zl54w3jnvvax
Fastboot drivers:
win_usb.inf file from http://unlockbootloader.sonymobile.com/instructions
Android SDK(unlocking bootloader):
http://developer.android.com/sdk/
Flashtool(flashing kernel):
http://forum.xda-developers.com/showthread.php?t=1351309
Zergrush(for rooting):
http://forum.xda-developers.com/attachment.php?attachmentid=784296&stc=1&d=1321435888
Clockworkmod Recovery(flashing ROM):
http://www.mediafire.com/?73xv18tht0e8zt4
WT19i_4.0.2.A.0.58 firmware:
NOTE:Enable "USB DEBUGGING" from Menu -> Settings -> Applications -> Development
>Enable "UNKNOWN SOURCES" from Menu -> Settings -> Applications
1) If you're already on official ICS, downgrade to Gingerbread, root Gingerbread and then install other custom ROMs as follows:
2) Flash any Android 2.3.4 firmware (I've tried this method only with the WT19i_4.0.2.A.0.58 firmware though) using Flashtool
->Select Flashmode, Wipe data, Wipe cache
3) Use Zergrush v3 by DoomLord. Works well with 0.58 version
If Superuser app has been installed, rooting is successful.
4) Install ClockWorkMod Recovery 5.0.2.7-nAa-r2(Ported by [email protected])
5) Make a backup in recovery mode. (see below for howto)
6) Install Android SDK Manager
If Google USB Driver is not visible, install Android SDK Tools Rev 20 first, reopen SDK Manager.
Replace android_winusb.inf-file in extras\google\usb_driver folder with the new one on http://unlockbootloader.sonymobile.com/instructions
7) Unlock bootloader officially from: http://unlockbootloader.sonymobile.com/instructions
Instructions on that page are pretty clear.
NOTE: Unlocking the bootloader the official way will void your phone's warranty and DRM keys will be lost. You may want to use the testpoint method as mentioned here:
http://forum.xda-developers.com/showthread.php?t=1285285
8) Download Cyanogenmod 7.2 for WT19i (=coconut version) and place it on your SD card.
9) Ensure that the fastboot drivers are installed.
10) Replace stock kernel : Extract boot.img from the Cyanogenmmod 7.2 ZIP file that you downloaded. Now, in Flashtool, select Flash button > Fastboot mode > Select kernel to Flash > Point it to the boot.img file you extracted. Check log in background window for success.
11) Restart the phone into Recovery. Select Wipe data/factory reset followed by Wipe cache partition followed by Advanced>Wipe Dalvik cache.
Then, install zip from sdcard. Select the coconut 7.2.0. ZIP file you placed here earlier.
Wait for about 5-10 minutes. If you're worried, open Command Prompt, navigate to the fastboot folder and run adb logcat to see what's happening!.
And that's it, you're done!
(If the logging process looks like it's repeating itself for more than 10 minutes, remove battery restart phone, and see if Cyanogenmod now boots up(again, will take ~5 minutes). If it does not still boot(rare case), repeat step 10. Make sure you download the CM ZIP package from your computer)
If you get an 'assert' error (Status 7 error) then, edit the file updater-script in your cm7.2.0 ZIP file\META-INF\com\google\android\. Remove only the first line (ending with a . Now repeat step 10 again.
Extra: To use Google services, you need to flash the gapps.zip similar to the way you did CM 7.2. However, do NOT wipe cache do NOT wipe data or anything! To install, simply boot into recovery, install zip from sd card and choose the gapps ZIP file. Later, Restart phone
How to enter recovery mode on the WT19i:
Turn off phone. Turn it on again. As soon as you see Sony Ericsson logo, keep tapping Volume Down button repeatedly. (Once you are familiar, you'll realize that even 1-2 presses can do the trick)
You do not need to root and install Recovery in the first place, I mean skip steps 3, 4 and 5.
Backup can also be made in the same recovery, which is included with kernel, right before wiping and installing the ROM.
I would just install any Android 2.3.4 firmware, then unlock bootloader, install custom kernel, backup, then wipe, then install.
And if you unlock bootloader officially, then do not forget your phone's warranty will be void and DRM keys lost.
If you succeed with official bootloader unlock, then fastboot drivers are already installed, no need to worry about that
And before ppl go crazy - First boot does take a while, as all the caches need to be recreated.
This tutorial can also work for other custom ROMs aswell, because the process is the same, the only different thing is the kernel and the .zip file.
You do not need to root and install Recovery in the first place, I mean skip steps 3, 4 and 5.
Click to expand...
Click to collapse
Right I meant that to install CWM!
I would just install any Android 2.3.4 firmware, then unlock bootloader, install custom kernel, backup, then wipe, then install.
Click to expand...
Click to collapse
Right except that I had problems with using Zergrush v2 and v4. That's why I thought I'd mention.
If you succeed with official bootloader unlock, then fastboot drivers are already installed, no need to worry about that
Click to expand...
Click to collapse
Yes, but that would entail downloading the android_winusb.inf-file from the mentioned official site, wouldn't it?
And before ppl go crazy - First boot does take a while, as all the caches need to be recreated.
Click to expand...
Click to collapse
Oh, but how common is it for a WT19i to take more than 10 minutes at boot? I did this on two other friends' WT19is; both of them took around 3 minutes. (Obviously i did something wrong the first time on my phone)
Anyhow,thanks for the constructive comments!Editing it accordingly!
blackstallion1234 said:
Right I meant that to install CWM!
Click to expand...
Click to collapse
You do not need CWM in the first place. You can make the full Nandroid backup AFTER flashing custom kernel and BEFORE wiping and installing the ROM.
blackstallion1234 said:
Right except that I had problems with using Zergrush v2 and v4. That's why I thought I'd mention.
Click to expand...
Click to collapse
You don't need root to be honest.
blackstallion1234 said:
Yes, but that would entail downloading the android_winusb.inf-file from the mentioned official site, wouldn't it?
Click to expand...
Click to collapse
What's your point? If you unlock the bootloader official way and it succeeds, you do not have to deal with the drivers anymore, as they have been installed properly and they're working
blackstallion1234 said:
Oh, but how common is it for a WT19i to take more than 10 minutes at boot? I did this on two other friends' WT19is; both of them took around 3 minutes. (Obviously i did something wrong the first time on my phone)
Click to expand...
Click to collapse
I didn't mention about minutes. Some ppl are not aware of that, so it was just a small note for them.
You do not need CWM in the first place. You can make the full Nandroid backup AFTER flashing custom kernel and BEFORE wiping and installing the ROM.
Click to expand...
Click to collapse
Right! The custom kernel would provide a recovery (which isn't present on a stock kernel for our phone), right?
You don't need root to be honest.
Click to expand...
Click to collapse
I shall edit the title to something like 'Root and install CM...' where I express the opinion that rooting does have advantages too!
blackstallion1234 said:
Right! The custom kernel would provide a recovery (which isn't present on a stock kernel for our phone), right?
Click to expand...
Click to collapse
Custom kernels already include recovery and stuff needed for root.
blackstallion1234 said:
I shall edit the title to something like 'Root and install CM...' where I express the opinion that rooting does have advantages too!
Click to expand...
Click to collapse
Rooting is already included in custom ROMs, if not then custom kernel does the job and roots it automatically. You don't need to root it by yourself
didn anyone tried latest nightly
There is a stable rom for LWW listed on the cyanogen mod downloads page. Is it really stable? I'm asking this because when you select 'all' and 'stable' on left panel on that site, there is no stable rom listed for lww! This is very confusing.
hsrbnr said:
There is a stable rom for LWW listed on the cyanogen mod downloads page. Is it really stable? I'm asking this because when you select 'all' and 'stable' on left panel on that site, there is no stable rom listed for lww! This is very confusing.
Click to expand...
Click to collapse
Yes the version of CyanogenMod 7.2.0 listed on their site is stable and indeed the one used in this thread for reference. Click coconut in the left hand pane(that's the codename for LWW) and then selecting stable. (Alternately just go to http://get.cm/?device=coconut&type=stable)
I just installed Cyanogenmod today and it's fantastic!
Do i need to unlock my bootloader?
Hi,
I've rooted my phone (Sony Ericssion Live With Walkman-WT19i) and right now running stock ICS ROM from sony (build: 4.1.B.0.431). Even Clockworld Mod is installed. I want to install custom rom from cyanogenmod(or any other custom rom).
My question is : Do i really need to unlock my bootloader,coz as I know rooting may void the warranty but unlocking the bootloader will surely void it.
Please tell me the detailed process of installing custom rom step by step (right after the successful rooting and installing CWM process). I woould be thankful if u include both the process(with and without unlocking bootloader,if any).
Thank You Very Much In Advance.
Could You please mail me the steps even to my persoanl mail id [email protected]
sauravsagar said:
Hi,
I've rooted my phone (Sony Ericssion Live With Walkman-WT19i) and right now running stock ICS ROM from sony (build: 4.1.B.0.431). Even Clockworld Mod is installed. I want to install custom rom from cyanogenmod(or any other custom rom).
My question is : Do i really need to unlock my bootloader,coz as I know rooting may void the warranty but unlocking the bootloader will surely void it.
Please tell me the detailed process of installing custom rom step by step (right after the successful rooting and installing CWM process). I woould be thankful if u include both the process(with and without unlocking bootloader,if any).
Thank You Very Much In Advance.
Could You please mail me the steps even to my persoanl mail id [email protected]
Click to expand...
Click to collapse
You can't install CM with locked bootloader it requires different kernel.
Yes you need to, for CM!
sauravsagar said:
I want to install custom rom from cyanogenmod(or any other custom rom).
My question is : Do i really need to unlock my bootloader,coz as I know rooting may void the warranty but unlocking the bootloader will surely void it.
Click to expand...
Click to collapse
Yes, most custom ROMs need the bootloader to be unlocked(including CyanogenMod). There are two methods to unlock your bootloader - the test point method and the official method. If you're concerned with your warranty(which may already have been voided), use the Test point method described in the FAQ by Someguyfromhell.
And what ^ said.
Please tell me the detailed process of installing custom rom step by step (right after the successful rooting and installing CWM process). I woould be thankful if u include both the process(with and without unlocking bootloader,if any).
Thank You Very Much In Advance.
Click to expand...
Click to collapse
If only people read FAQs on forums...
thanx a million
thanks a million for the tutorial
this thing rocks
i do love this rom
and most nice thing it dose support ad-hoc
wathbiknight said:
thanks a million for the tutorial
this thing rocks
i do love this rom
and most nice thing it dose support ad-hoc
Click to expand...
Click to collapse
Glad it worked for you! Not to be a thanks-whore, but it's just a click away if I really helped ya!
Cheers!
Might be a foolish question but I flashed some custom firmware on my Samsung Star (not Android) back in the days and only had the English language available instead of the Dutch I wanted.
If I root and install the ROM will everything also be available in English only or will I still be able to use Dutch. Will I lose something?
Another question: If I upgrade to ICS official by Sony trough Sony Bridge on my Mac and ICS is installed on my phone, will I lose data and the root and ROM?
Thanks in advance
zeromusx said:
If I root and install the ROM will everything also be available in English only or will I still be able to use Dutch. Will I lose something?
Click to expand...
Click to collapse
That depends on whether the new ROM you're flashing contains a Dutch language pack. Rooting per se will not modify your data or your language. Also note that flashing can erase your internal memory data.(I have no experience with the Star, however I had a Nokia 3500c. Using the official Nokia app, I upgraded my firmware without any data loss. If you will be using the official Samsung app, you should be safe). That said, make it a point to backup your SMSes, contacts, calendars, notes etc.
Another question: If I upgrade to ICS official by Sony trough Sony Bridge on my Mac and ICS is installed on my phone, will I lose data and the root and ROM?
Click to expand...
Click to collapse
Will I lose root? Yes, you will most likely lose existing root permissions if you already are rooted.
Will I lose data? Unlikely, using Sony Bridge.
Will I lose ROM? Of course, that's the reason you're upgrading to ICS in the first place, isn't it?
Have a look at the following resources and any other places you'll stumble across.
http://forum.xda-developers.com/showthread.php?t=1253127,
http://www.techcredo.com/android/android-rom-and-rooting-dictionary-all-the-funny-words-explained
Good luck!
Installed Cyanogen Mod 9 in my Live with walkman. So far So good!
rolo143 said:
I just installed Cyanogenmod today and it's fantastic!
Click to expand...
Click to collapse
Sir can you show us some screenshots?
thanks again
blackstallion1234 said:
Glad it worked for you! Not to be a thanks-whore, but it's just a click away if I really helped ya!
Cheers!
Click to expand...
Click to collapse
my bad
i thought i did click it earlier , but did today
i'll come back for ROM review later

Xperia X10 Mini Pro Rooted...now wont boot?

I have no idea what I'm doing so I thought following a step by step guide would help me...but apparently not.
I followed this guide because I wanted this ROM:
http://forum.xda-developers.com/showthread.php?t=1206625
BUT I used xRecovery from here (also I used this guide to get root access):
http://forum.xda-developers.com/showthread.php?t=1682966
I already had the baseband so I didn't do the optional step, but I did download the file after searching the topic for a live link (I wanted all the files I might need before starting so I could focus on the job).
My phone is now in an infinite loop of turning on, saying Sony Ericsson, then shutting down after a minute or so and retrying. I'm not sure what info to provide so I will just list off things I wrote down beforehand:
FIRMWARE: 2.1-UPDATE1
KERNEL: 2.6.29
BUILD: 2.1.1.A.0.6
SI: 1248-0835
I just wanted to let anyone who wants to help know I restored the backup through xRecovery...so it's like I never did anything....but I still really need to get rid of the OS I have and replace it with something clean, preferably what I tried the first time (first link).
next time post questions in X10 mini pro section, This is X10 section.
I dont know much about it but did you unlock your bootloader?
Thread Moved​
Please take more care when opening a thread​
THeLogiC said:
next time post questions in X10 mini pro section, This is X10 section.
I dont know much about it but did you unlock your bootloader?
Click to expand...
Click to collapse
I'm really sorry, I got lost by accident. I'm not used to this sort of forum .
I did not unlock a bootloader, I will go look at it now, thanks so much!
Alunny said:
I'm really sorry, I got lost by accident. I'm not used to this sort of forum .
I did not unlock a bootloader, I will go look at it now, thanks so much!
Click to expand...
Click to collapse
You don't need to unlock the bootloader becasue you're trying to install a modified stock-rom from SE, which will run on SonyEricsson's stock kernel with no problem.
I hope you did all the wipes in xRecovery?
wipe data/factory reset
wipe cache
Go into advanced menu
wipe dalvik-cache
wipe battery stats
Usually a bootloop on a rom that is proven to work is due to left-over junk in the cache or dalvik-cache. You can do these after you've installed the ROM.
Oh okay. I hadn't unlocked the bootloader and I was having trouble keeping my phone off and connected to my puter so thought I had better leave it for a day when I have time to focus on it. That was the part of rooting I was afraid of.
I did the first two cache but not the other two. Will try again in a few minutes and do those!
Same thing. Think I'm going to have to try the bootloader thing.
Alunny said:
Same thing. Think I'm going to have to try the bootloader thing.
Click to expand...
Click to collapse
If you want that particular ROM there is no need to unlock the bootloader.
It is more dangerous than just rooting your phone and only needed if you need a custom kernel, which you don't for this ROM.
If you have flashtool (you can get it from here if you don't have it)
Make sure USB-debugging is on on your phone
Start flashtool
Connect your phone to your computer
Root it using the ROOT button in flashtool (the button with the lock on it)
Install xRecovery using the button with the cross on it.
Use the menu to boot into xRecovery
Choose Install zip from sd-card (no need to rename the zip this way)
Choose zip from sd-card (it wil show you the content on your sd-card)
Choose your ROM's zip
Choose yes
After the install is done reboot your phone.
If it won't boot the zip-file you downloaded may be corrupted.
You can get back to your original firmware by using Sony Update Service or PC Companion, so your phone will work again.

[Q] Rooting offcial firmware 10.4.b.0.109

Hi Guys
I recently bought a Tablet Z and am currently running the latest official 10.4.b.0.109 firmware for Wifi models.
I am aware that there are guides for rooting the firmware version before this as well as upgrading a rooted device to the latest version but I can't seem to find a guide for rooting my current official firmware from scratch.
I'd like to be able to do this so I can run 'root-only' apps and be able to turn off the screen whilst using an MHL adapter.
Any help would be greatly appreciated
Thanks
AronR said:
Hi Guys
I recently bought a Tablet Z and am currently running the latest official 10.4.b.0.109 firmware for Wifi models.
I am aware that there are guides for rooting the firmware version before this as well as upgrading a rooted device to the latest version but I can't seem to find a guide for rooting my current official firmware from scratch.
I'd like to be able to do this so I can run 'root-only' apps and be able to turn off the screen whilst using an MHL adapter.
Any help would be greatly appreciated
Thanks
Click to expand...
Click to collapse
I did this a week ago, and what a carry on I had, I thought i bust my tablet
I downgraded to .370 version using official firmware with flashtool, then I rooted using DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit (this is the easy part)
Then I used .109 version firmware (stripped ftf and flashable zip) - this is where it went wrong as I got into a boot loop
http://forum.xda-developers.com/showthread.php?t=2671276
I used both DE versions (German) for the flash/install - still works on UK tablet
I think there is a specific order to install busybox before or after dual recovery - this might be where it went wrong for me.
I also used an older version of dual recovery, (TabZ-lockeddualrecovery2.7.94-BETA.installer) and have yet to flash to the latest version
Sorry this is a bit muddled.
I just got my tab a couple days ago I guess I screwed up upgrading from 370 to 109. Following along closely to this thread
Sent from my SGP311 using Tapatalk
This is a guide that I wrote to enable root on Android version 4.3, build number 10.4.1.B.0.109 for SGP311. Follow at your own risk. I will not be responsible for damage to your Xperia Tablet Z! I am going by memory and XDA posts I have re-read.
Please read this first then follow the steps!!
1. Firstly you need to ensure you have the drivers installed for your tablet, so you could install Sony PC Companion http://www.sonymobile.com/gb/tools/pc-companion/
2. On your tablet make sure that Developer options is enabled (if not, press About tablet in the tablet settings menu several times), USB debugging is ticked and Verify apps over USB. Also turn on Unknown sources in Security settings
3. Assuming that the tablet is running version 10.4.1.B.0.109 you need to downgrade to version.370
4. Download and install Flashtool by @Androxyde http://www.flashtool.net/download.php - install this to your C: drive
5. Download the official .370 (I used SGP311_10.1.C.0.370 DE_Unbranded.ftf) firmware from here http://forum.xda-developers.com/showthread.php?t=2402863 thanks to @DevMark. This file should be placed inside the firmwares folder of Flashtool and thanks to @ donedos for his initial suggestion
6. Download the rooting kit from http://forum.xda-developers.com/showthread.php?t=2333566. Thanks to @DooMLoRD
7. It is suggested that a backup is carried out on the tablet as this flash/root will wipe the data from it – I never did this, as I was quite happy to install apps/.apk again, and I had a lot of crap on my tablet anyway
8. Open up Flashtool, power off the tablet, and plug the usb cable into the tablet.
9. With the tablet still turned off press the volume down button, and plug the usb cable into your PC, this should get your tablet into flash mode
10. There is a lightning bolt symbol on top left corner of Flashtool, click this, and two options should pop up. I think you click the top one; if so, you will be prompted to locate the .ftf file, select the .370 file. If this file is not visible, you probably need to select the second option that popped up!
11. The tablet should be flashing now, and takes a few minutes or so. Instructions will appear in Flashtool to unplug and power on your device.
12. It will take a while for your tablet to turn back on; when it does you might need to carry out the actions again in 2. above. Just make sure you are running firmware .370 now instead of .109
13. Now connect you tablet again to USB, device drivers might install again. Open up/extract DooMLoRD_Easy-Rooting-Toolkit_v17 and click the runme_win.bat file and follow the instructions – your tablet should now be rooted. Check for the Super SU app in your app list, or if it’s not there install from Play Store.
14. Download the file Xperia Tablet Z (SGP311) 10.4.1.B.0.109 VMo De from here http://forum.xda-developers.com/showthread.php?t=2671276, thanks goes to @bernddi . Extract the file so there are two files (SGP311_10.4.1.B.0.109_VMo De_stripped.ftf and SGP311_10.4.1.B.0.109_VMo De.zip)
15. Download and use this file http://www.winmd5.com/ to verify the md5 checksum matches the .109 files you downloaded.
16. If everything is okay, place the large zip file onto the root of your external memory card, and the .ftf file into the firmwares folder of Flashtool (later on don’t mix this file up with the .370 file)
17. Download the correct version of XZDualRecovery file for your tablet, – thanks to @[NUT]. I first tried the most recent version, but had problems with flash and root, so then I tried the older version TabZ-lockeddualrecovery2.7.86-BETA.installer. Files are linked from here http://forum.xda-developers.com/showthread.php?t=2261606.
18. Download and Install BusyBox from the Playstore, and run the app, then install again to your Tablet (using default options I believe) – this install failed first time for me, if same happends with you try again until it works
19. Connect your .370 rooted tablet to your PC, and run the DualRecovery file by clicking on install.bat – this will install the recovery to your tablet
20. Your tablet should power back on, or you’ll need to turn it on yourself. Make sure stuff works fine, you might need to carry out No. 2 again, I’m not sure
21. You should also have a file called NDR Utils on your tablet, if not install from the PlayStore, and run this. The option to boot into Philz Touch Recovery should be visible, select this option and reboot. You can reboot by pressing power up, while the tablet is turning on, but I have problems getting this to work. NDR makes it much easier
This is where it might get risky. It appears that the older version of DualRecovery does not have the option to verify the md5 checksum, but if the file winmd5free said the numbers match you should be okay
22. In recovery you need to select Install Zip, then select install zip from storage/sdcard1, then go to the zip file, and press it. The flashing of version .109 should begin – it takes a while
23. After the flash you must power off the device, DO NOT reboot
I believe this is where I got into a boot loop, and I am not certain how I got out of it. This link might help http://forum.xda-developers.com/showthread.php?t=2703882. Thanks to @Cat McGowan. When I finally got out of the boot loop, I started all over again from step No.8!
24. Open up Flashtool again, and flash the stripped ftf file like you did in No. 9 and No. 10
25. Follow the instructions to disconnect and power on your tablet, you should now have version .109 and still be rooted after the initial setting up of the tablet.
Please let this work!
If there is anyone reading this that spots an error or omission please post it
grat guide, Aid777, thanks.
I had already done exactly as you explain but I did not delete anything when I did the downgrade and I found everything working.
Now I'm still stuck with the firmware because I want to install the correct localization of the 109 version (I downloaded the ftf from Sony) and I'm trying to figure out how to do the zip and ftf whit this...
But i'v a question..what is the purpose of installing busybox?
cirovi said:
grat guide, Aid777, thanks.
I had already done exactly as you explain but I did not delete anything when I did the downgrade and I found everything working.
Now I'm still stuck with the firmware because I want to install the correct localization of the 109 version (I downloaded the ftf from Sony) and I'm trying to figure out how to do the zip and ftf whit this...
But i'v a question..what is the purpose of installing busybox?
Click to expand...
Click to collapse
Some root apps and recovery need it.
Sent from my SGP311 using Tapatalk
cirovi said:
But i'v a question..what is the purpose of installing busybox?
Click to expand...
Click to collapse
actually it is already integrated in recovery package (/xbin/busybox), so there is no need to install it manually.
Well my tab went tits up a little while back, and I followed my guide and it worked
worked perfect for me... thank you very much
Help Needed
Hi Guys,
I followed Aid777's instructions to the dot. Unfortunately im now stuck in the "Boot loop". It keeps showing SONY, and then restarts, and over.
Please help me to recover my tablet. Any help would be greatly appreciated!
---------- Post added at 11:25 PM ---------- Previous post was at 11:16 PM ----------
CentinelX said:
Hi Guys,
I followed Aid777's instructions to the dot. Unfortunately im now stuck in the "Boot loop". It keeps showing SONY, and then restarts, and over.
Please help me to recover my tablet. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Ok I managed to get out and install 370 again. But where did I go wrong?

Categories

Resources