Cannot Unlock Bootloader using FlashTool - Xperia Tablet Z Q&A, Help & Troubleshooting

Hi,
Try as I may. I cant unlock my Tablet Z LTE (SGP321) bootloader.
Im using FlashTool 0.9.18.4 and am currently on stock KK 4.4.4. firmware (SGP321_10.5.1.A.0.283_CE.ftf)
Everytime I try to ulock the bootloader it fails with FlashTool message that drivers need to installed
I've trird installing the drivers via the \FlashTool\Drivers directory.......but always get the following message "DPInst.exe doe not execute on your current operating system" - I'm running Windows 7 Ultimate 64bit
Any and all help would be greatly appreciated as I'm desperate to install CM KK 4.4.4 and get rid of the Sony stuff.
Thanks in advance
_____________________________
Sony Xperia Tablet Z LTE/WIFI SGP321

vybztymz said:
Hi,
Try as I may. I cant unlock my Tablet Z LTE (SGP321) bootloader.
Im using FlashTool 0.9.18.4 and am currently on stock KK 4.4.4. firmware (SGP321_10.5.1.A.0.283_CE.ftf)
Everytime I try to ulock the bootloader it fails with FlashTool message that drivers need to installed
I've trird installing the drivers via the \FlashTool\Drivers directory.......but always get the following message "DPInst.exe doe not execute on your current operating system" - I'm running Windows 7 Ultimate 64bit
Any and all help would be greatly appreciated as I'm desperate to install CM KK 4.4.4 and get rid of the Sony stuff.
Thanks in advance
_____________________________
Sony Xperia Tablet Z LTE/WIFI SGP321
Click to expand...
Click to collapse
don't use flashtool for unblocking BL (cause you can use instruction from Sony's site), or install drivers properly: look for dpinst.exe in your temp folder and set compability mode with WinVista in it's properties and it will install properly.

Rootk1t said:
don't use flashtool for unblocking BL (cause you can use instruction from Sony's site), or install drivers properly: look for dpinst.exe in your temp folder and set compability mode with WinVista in it's properties and it will install properly.
Click to expand...
Click to collapse
Thanks for your reply/suggestion. Unfortunately I do not have the "set compatibility" option in DPInst.exe properties. I have found 2 x dpinst.exe and 2 x dpinst64.exe files on my system.
I've tried using the Sony site instructions but
1. When i attch the tablet to my laptop in Fastboot mode (Vol up), and type "fastboot devices" at the cmd prompt, i dont get any indication that my tablet has been/is recognised (see scrrenshot 1)
2. When I run the unlock command using the unlock code obtained from Sony, command line sticks at "waiting for device" (screenshot 2)
i'm at a loss as to whats wrong \ what Im doing wrong
All / any suggestions welcomed as am desperate to install CM11/12.
Thanks in advance
Vybz

vybztymz said:
Thanks for your reply/suggestion. Unfortunately I do not have the "set compatibility" option in DPInst.exe properties. I have found 2 x dpinst.exe and 2 x dpinst64.exe files on my system.
I've tried using the Sony site instructions but
1. When i attch the tablet to my laptop in Fastboot mode (Vol up), and type "fastboot devices" at the cmd prompt, i dont get any indication that my tablet has been/is recognised (see scrrenshot 1)
2. When I run the unlock command using the unlock code obtained from Sony, command line sticks at "waiting for device" (screenshot 2)
i'm at a loss as to whats wrong \ what Im doing wrong
All / any suggestions welcomed as am desperate to install CM11/12.
Thanks in advance
Vybz
Click to expand...
Click to collapse
Check that your tablet's fastboot drivers are installed correctly in device manager on windows. I haven't done this on the tablet z (yet), but if you do not have the drivers installed on a nexus you wont see any device in the fastboot devices option.
So i would suggest you download the correct drivers (preferably from sony, but google drivers might also work), and check that the device manager dont have any unknown devices (tablet z) and if you do not try reinstalling the driver by uninstalling the current one and getting the correct one from sony or the google drivers.

marcusorwen said:
Check that your tablet's fastboot drivers are installed correctly in device manager on windows. I haven't done this on the tablet z (yet), but if you do not have the drivers installed on a nexus you wont see any device in the fastboot devices option.
So i would suggest you download the correct drivers (preferably from sony, but google drivers might also work), and check that the device manager dont have any unknown devices (tablet z) and if you do not try reinstalling the driver by uninstalling the current one and getting the correct one from sony or the google drivers.
Click to expand...
Click to collapse
Thanks - you were right, it was drivers. Finally managed (I think) to unlock bootloader.........but am now stuck in a bootloop .
Any suggestions welcomesed

Use flashtool and simply flash any stock version on top.
Alternatively, you can use some non stock ROM, but for that your first need to install the custom recovery via fastboot.

vybztymz said:
Any suggestions welcomesed
Click to expand...
Click to collapse
Have a look at this guide for installing a CM ROM

vybztymz said:
Thanks - you were right, it was drivers. Finally managed (I think) to unlock bootloader.........but am now stuck in a bootloop .
Any suggestions welcomesed
Click to expand...
Click to collapse
If your stuck in a bootloop i would suggest trying and flash recovery through flashtools and see if you can clear dalvik cache in the custom recovery.
it might help.
but otherwise do as the others say and flash a custom rom (CM preferably).

Lost Root after installing CN12 Nightly (Lollipop 5.0x)
marcusorwen said:
If your stuck in a bootloop i would suggest trying and flash recovery through flashtools and see if you can clear dalvik cache in the custom recovery.
it might help.
but otherwise do as the others say and flash a custom rom (CM preferably).
Click to expand...
Click to collapse
hanks for you help.
I have rooted and unlocked the boot loader of my SGP321 (WiFi/LTE).
But every time I install CM12 (flashed zip via TWRP), I lose Root......and as far as I can see, there's no way back from that, bar a complete re-install of stock (KK444)
Really frustrated as have wanted to flash CM and get rid of the Sonly bloatware (example: of 2gb internal memory, the stock firmware leaves only c.500mb free....thats just plain ridiculous. Compared to CM12 which leaves 1.7 GIGS free.
any suggestions.......?

vybztymz said:
hanks for you help.
I have rooted and unlocked the boot loader of my SGP321 (WiFi/LTE).
But every time I install CM12 (flashed zip via TWRP), I lose Root......and as far as I can see, there's no way back from that, bar a complete re-install of stock (KK444)
Really frustrated as have wanted to flash CM and get rid of the Sonly bloatware (example: of 2gb internal memory, the stock firmware leaves only c.500mb free....thats just plain ridiculous. Compared to CM12 which leaves 1.7 GIGS free.
any suggestions.......?
Click to expand...
Click to collapse
CM12 should have root built in, check developer options for it on your device.
If not then just flash SuperSU.zip from chainfire (i prefer chainfire's version of super user).
Chainfire's SuperSU is here: http://forum.xda-developers.com/showthread.php?t=1538053
please note that i have not tested this on a Tab Z but it should work.

marcusorwen said:
CM12 should have root built in, check developer options for it on your device.
If not then just flash SuperSU.zip from chainfire (i prefer chainfire's version of super user).
Chainfire's SuperSU is here: http://forum.xda-developers.com/showthread.php?t=1538053
please note that i have not tested this on a Tab Z but it should work.
Click to expand...
Click to collapse
Thanks for the speedy reply. Really appreciated. I've gone intp developer options.....but what am i looking for?
[EDIT] In Developer Options, and under "Root Access" it says "Disabled"
[EDIT 2] Downloaded a RootChecker and it tells me I'm not rooted
I'm totally frustrated.....have been trying to install CM12 for the last 6 hours!!!!
NUT (duallockedrecovery) has done a fantastic job developing the xzdr.........but i have to say that, in common with a lot of devs.... not very good at writing nstructions.
I'm an IT manager and often train staff in systems etc, including writing user guides. When writing guides/instructions, I ALWAYS assume that the end user KNOWS NOTHING......and so the guides/etc are very detailed. Yes, it takes a while to write them, but feedback shows its the right track to take.
Almost all the articles on flashing CM12/using Fastboot etc lack small, but important, details......!!! I'm still not really sure if i should be using TabZ-lockeddualrecovery or XZ-lockeddualrecovery..........!!!!!!
i've got as far as I have by pulling together numerous XDA posts in order to get a (full'ish) picture of what to do. Devs, pls make your instructions clearer for people who aren't devs. Rant over
My current position is that my Xperia Tablet Z is
1. On KitKat 444 (Firmware ver. 283)
2. Rooted
3. Bootloader unlocked
4. SuperSU & SuperSu Pro installed
How do i get from this position to a successful CM12 install?
I have CM12 Nightly (7th May), GApps 5.0x Minimal ready and waiting....
I'm not a stupid person, but trying to do this has made me feel like a complete idiot.....help!!!

vybztymz said:
Thanks for the speedy reply. Really appreciated. I've gone intp developer options.....but what am i looking for?
I'm totally frustrated.....have been trying to install CM12 for the last 6 hours!!!!
NUT (duallockedrecovery) has done a fantastic job developing the xzdr.........but i have to say that, in common with a lot of devs.... not very good at writing nstructions.
I'm an IT manager and often train staff in systems etc, including writing user guides. When writing guides/instructions, I ALWAYS assume that the end user KNOWS NOTHING......and so the guides/etc are very detailed. Yes, it takes a while to write them, but feedback shows its the right track to take.
Almost all the articles on flashing CM12/using Fastboot etc lack small, but important, details......!!! I'm still not really sure if i should be using TabZ-lockeddualrecovery or XZ-lockeddualrecovery..........!!!!!!
i've got as far as I have by pulling together numerous XDA posts in order to get a (full'ish) picture of what to do. Devs, pls make your instructions clearer for people who aren't devs. Rant over
My current position is that my Xperia Tablet Z is
1. On KitKat 444 (Firmware ver. 283)
2. Rooted
3. Bootloader unlocked
4. SuperSU & SuperSu Pro installed
How do i get from this position to a successful CM12 install?
I have CM12 Nightly (7th May), GApps 5.0x Minimal ready and waiting....
I'm not a stupid person, but trying to do this has made me feel like a complete idiot.....help!!!
Click to expand...
Click to collapse
Yea i know what you mean by guides not being written to include alot of details and missing out on small stuff that might be important, but anyway.
In the Developer Options there should be a box called Root Access, and it should be defaulted to Disabled ones you have installed CM12 for the first time, its just a matter of enabling this.
Im guessing you already know how to enable Developer Options, but if you dont here is how:
Go to About Device (or Phone/Tablet) and click on Build number a bunch of times (i think its 5-6 times), and the developer options should be visible in the settings.
If that dosent work you might want to try and flash the SuperSU binary through recovery, the zip to use is the one found in chainfires xda-thread here: http://forum.xda-developers.com/showthread.php?t=1538053
But here is the direct link for the zip https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Just put that on your device internal memory (or SD-Card) and flash it in your recovery of choice, it should work in CWM, TWRP and Odin (but you dont have a samsung so the last one dosent matter).
This should install the SuperSU app, and its basic su binary onto your CM12 rom.
In both cases i would recommend you install root checker (https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck) and see if root is available to you.
Also to note is that the Root Access option built into CM12 isnt that customizable and i would still recomend you install SuperSU, but if the Root Access option is working you can just download the SuperSU application from the play store and let it install SU binary and then you can disable CM12's built in root option ones you make sure the SuperSU was installed correctly.

Thanks so much for your help/patience......but i'm afraid im giving up (for now).
Will try again in a few days......so its back to rooted stock 444

By the way, why have CM decided to go with their own (as good as useless) recovery????

I forgot to say that you've helped fill in a few more gaps for me in respect of this i.e. flashing SU; changing Root Access in Dev. Options etc.
These are the things that all the articles ive read FAILED to mention.
Thanks so much

vybztymz said:
I forgot to say that you've helped fill in a few more gaps for me in respect of this i.e. flashing SU; changing Root Access in Dev. Options etc.
These are the things that all the articles ive read FAILED to mention.
Thanks so much
Click to expand...
Click to collapse
No problem, if you have any other questions just tell me and i might be able to help you
I have also been in the dark about this stuff before, and im still not used to other manufacturers style of rooting and unlocking the bootloader (sony is the next best after Nexus) since samsung and the others usually you have a harder time unlocking and rooting.
But good luck if you try it again :victory:

Related

Xperia Tablet Z Questions and Rooting

Hi there,
You'll have to forgive me if this has been asked around but I'm a complete noob in terms of rooting. Like all noobs do they research as much as they can before they stuff anything up.
I have found a link in the forum http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377, which instructs the rooting or recovery on the stock 4.4.4 firmware.
The instructions doesnt seem to point out on the boot loader status, from what I've read if its unlocked I'm allowed to put any kind of ROM something like Cyanogenmod or PACMAN and etc.
Though the catch is the manufacturer would not acknowledge your warranty as the custom ROM may work the components above the norm. Does this root process involve unlocking the bootloader?
I prefer not to have it unlocked as I'm still under warranty. Also I dont think Sony Xperia Tablet Z comes with some form of recovery is this correct? I hold the volume button and power and nothing pops just normal booting.
So if I can get that clarified that would be great. I am aware that rooting would make my tablet vulnerable to security, but that is if I install some fishy software or browsing some not so safe websites. I shouldn't have any problems if I just use it general use like office and emails.
I would like to root my device so that I can have the apps from Google Playstore write to my SD card, the first party apps can write to SD but dont have amazing features compared to a third party. I basically dont want to stuff the rooting. If there are some pointers I am happy to get some feedback.
Thanks for reading my lengthy scenario
Cheers
dude777 said:
Hi there,
You'll have to forgive me if this has been asked around but I'm a complete noob in terms of rooting. Like all noobs do they research as much as they can before they stuff anything up.
I have found a link in the forum http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377, which instructs the rooting or recovery on the stock 4.4.4 firmware.
The instructions doesnt seem to point out on the boot loader status, from what I've read if its unlocked I'm allowed to put any kind of ROM something like Cyanogenmod or PACMAN and etc.
Though the catch is the manufacturer would not acknowledge your warranty as the custom ROM may work the components above the norm. Does this root process involve unlocking the bootloader?
I prefer not to have it unlocked as I'm still under warranty. Also I dont think Sony Xperia Tablet Z comes with some form of recovery is this correct? I hold the volume button and power and nothing pops just normal booting.
So if I can get that clarified that would be great. I am aware that rooting would make my tablet vulnerable to security, but that is if I install some fishy software or browsing some not so safe websites. I shouldn't have any problems if I just use it general use like office and emails.
I would like to root my device so that I can have the apps from Google Playstore write to my SD card, the first party apps can write to SD but dont have amazing features compared to a third party. I basically dont want to stuff the rooting. If there are some pointers I am happy to get some feedback.
Thanks for reading my lengthy scenario
Cheers
Click to expand...
Click to collapse
you don't have to unlock bootloader to get root on stock 4.4.4.
Rootk1t said:
you don't have to unlock bootloader to get root on stock 4.4.4.
Click to expand...
Click to collapse
Okay I have the tablet updated to 4.4.4 how would I go abouts to rooting it? I would like clear instructions on how this goes and where to look into this manner.
Cheers
dude777 said:
Okay I have the tablet updated to 4.4.4 how would I go abouts to rooting it? I would like clear instructions on how this goes and where to look into this manner. Cheers
Click to expand...
Click to collapse
If you already have Android 4.4.4 build 10.5.1.A.0.283 installed, all you have to do is the following steps. Make sure you use the kernel files that are for your tablet model.
1. Put the tablet into Flash Mode.
2. Use Flashtool to install the 10.5.A.0.230 kernel only.
3. Reboot the tablet into Normal Mode.
4. Install and run the Towelroot exploit.
5. Install SuperSU (I recommend the Pro version).
6. Put the tablet into Flash Mode again.
7. Use Flashtool to install the 10.5.1.A.0.283 kernel only.
8. Reboot the tablet into Normal Mode.
The tablet will now have root access.
Cat McGowan said:
If you already have Android 4.4.4 build 10.5.1.A.0.283 installed, all you have to do is the following steps. Make sure you use the kernel files that are for your tablet model.
1. Put the tablet into Flash Mode.
2. Use Flashtool to install the 10.5.A.0.230 kernel only.
3. Reboot the tablet into Normal Mode.
4. Install and run the Towelroot exploit.
5. Install SuperSU (I recommend the Pro version).
6. Put the tablet into Flash Mode again.
7. Use Flashtool to install the 10.5.1.A.0.283 kernel only.
8. Reboot the tablet into Normal Mode.
The tablet will now have root access.
Click to expand...
Click to collapse
Thanks for the help Cat McGowan, this process is assumed when the bootloader is locked? Also when you say into "flash mode" what does that mean?
Cheers
dude777 said:
Thanks for the help Cat McGowan, this process is assumed when the bootloader is locked? Also when you say into "flash mode" what does that mean? Cheers
Click to expand...
Click to collapse
Yes, the steps work with the boot loader locked. The boot loader does not need to be unlocked to gain root access. "Put the tablet into Flash Mode" means put the tablet into the mode where a file can be flashed to the tablet.
Flash Mode
1. Power off the tablet.
2. Connect a USB cable to the tablet. Do not connect the other end of the USB cable to a computer.
3. Press and hold the tablet's VOLUME DOWN button.
4. Connect the other end of the USB cable to a computer where USB drivers and Flashtool are installed.
5. Wait until the tablet's notification light flashes red-green once, then release the tablet's VOLUME DOWN button.
The tablet will now be in Flash Mode.
To exit Flash Mode, disconnect the USB cable.
Cat McGowan said:
Yes, the steps work with the boot loader locked. The boot loader does not need to be unlocked to gain root access. "Put the tablet into Flash Mode" means put the tablet into the mode where a file can be flashed to the tablet.
Flash Mode
1. Power off the tablet.
2. Connect a USB cable to the tablet. Do not connect the other end of the USB cable to a computer.
3. Press and hold the tablet's VOLUME DOWN button.
4. Connect the other end of the USB cable to a computer where USB drivers and Flashtool are installed.
5. Wait until the tablet's notification light flashes red-green once, then release the tablet's VOLUME DOWN button.
The tablet will now be in Flash Mode.
To exit Flash Mode, disconnect the USB cable.
Click to expand...
Click to collapse
Thank you for explaining this, I'll give this a shot when I get time. On another note, where would I be able to download the stock ROMs? Do I just search through this forum in hopes of getting a clean ROM?
dude777 said:
Thank you for explaining this, I'll give this a shot when I get time. On another note, where would I be able to download the stock ROMs? Do I just search through this forum in hopes of getting a clean ROM?
Click to expand...
Click to collapse
Yes, use the forum's search feature to find a FTF (FlashTool File) that is a stock ROM specifically for your tablet model and region. BTW, including your tablet model and region information somewhere in your posts (e.g., in your signature) would be beneficial when asking for advice or assistance.
Cat McGowan said:
Yes, use the forum's search feature to find a FTF (FlashTool File) that is a stock ROM specifically for your tablet model and region. BTW, including your tablet model and region information somewhere in your posts (e.g., in your signature) would be beneficial when asking for advice or assistance.
Click to expand...
Click to collapse
Thanks again for the help Cat McGowan, you have been a great help, I'll look into this in the weekend.
I'm currently on Android 4.4.4 build 10.5.1.A.0.283. I have already flashed 10.5.A.0.230 kernel using flash mode. But after that i'm unable to run the Towelroot exploit because my WiFi is disabled. Can anyone please advice me?
scooby_r said:
I'm currently on Android 4.4.4 build 10.5.1.A.0.283. I have already flashed 10.5.A.0.230 kernel using flash mode. But after that i'm unable to run the Towelroot exploit because my WiFi is disabled. Can anyone please advice me?
Click to expand...
Click to collapse
By "unable to run", do you simply mean you cannot run TowelRoot, or do you mean you cannot install TowelRoot because your Wi-Fi is disabled (why?)? If it is the latter, try connecting your tablet to a computer and using ADB to install tr.apk.
Cat McGowan said:
If you already have Android 4.4.4 build 10.5.1.A.0.283 installed, all you have to do is the following steps. Make sure you use the kernel files that are for your tablet model.
1. Put the tablet into Flash Mode.
2. Use Flashtool to install the 10.5.A.0.230 kernel only.
3. Reboot the tablet into Normal Mode.
4. Install and run the Towelroot exploit.
5. Install SuperSU (I recommend the Pro version).
6. Put the tablet into Flash Mode again.
7. Use Flashtool to install the 10.5.1.A.0.283 kernel only.
8. Reboot the tablet into Normal Mode.
The tablet will now have root access.
Click to expand...
Click to collapse
Cat McGowan said:
By "unable to run", do you simply mean you cannot run TowelRoot, or do you mean you cannot install TowelRoot because your Wi-Fi is disabled (why?)? If it is the latter, try connecting your tablet to a computer and using ADB to install tr.apk.
Click to expand...
Click to collapse
My apologies, what i meant is that i'm unable to install TowelRoot because WiFi is disabled.
Just a quick one, didnt get a chance in the weekend but the Towelroot exploit is an app that you grab from https://towelroot.com/? and SuperSU can be downloaded from playstore? Also why would I need SuperSU? Is it for my own protection? so no apps can do any wishy-washy things on my tablet?
Cheers
dude777 said:
Just a quick one, didnt get a chance in the weekend but the Towelroot exploit is an app that you grab from https://towelroot.com/?
Click to expand...
Click to collapse
Yes. Use your tablet's web browser to go to towelroot.com and click on the large λ symbol to download tr.apk to your tablet. After downloading tr.apk, install and run it (make it rain).
dude777 said:
and SuperSU can be downloaded from playstore?
Click to expand...
Click to collapse
Yes. I recommend SuperSU Pro.
dude777 said:
Also why would I need SuperSU? Is it for my own protection?
Click to expand...
Click to collapse
Gaining root access grants YOU administrator rights; SuperSU grants APPS administrator rights (i.e., root access).

[Q] Please help, new to rooting & confused!

Hi all,
Firstly sorry, you must get this all the time and be really bored of helping but i would be so grateful if anyone out there can point me in the right direction.
Firstly my phone details;
Model - Xperia Z2 D6503
Firmware - 1278-4770_23.0.1.a.3.9
Network - EE
Rooting status;
Bootloader unlock allowed: No
I want to root my phone but after reading what seems like thousands of web pages im more than a little confused. Does anyone out there have a step by step guide for beginners?
I want to use cwm recovery but don't understand how to get that on the phone as most guides say use it to back up before doing anything else but it isn't there to start with!
Also will installing cwm wipe my phone and sd card?
Any help would be much appreciated and many thanks in advance.
You can only install nuts dual recovery on a locked bootloader, proper recovery is included in the kernel and the kernel can only be changed on an unlocked bootloader, there was a a guide to rooting in one of the forums and I assume towel root will work, just search the z2 forum you'll find it
Sent from my Xperia Z2 using Tapatalk
Mr.R™ said:
You can only install nuts dual recovery on a locked bootloader, proper recovery is included in the kernel and the kernel can only be changed on an unlocked bootloader, there was a a guide to rooting in one of the forums and I assume towel root will work, just search the z2 forum you'll find it
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
Thanks for the response.
Is nuts recovery better or worse than cwm? Also i thought that towel root would not work with 4.4.4 at present?
Does the locked bootloader mean i cannot do certain things even after rooting my phone like install custom roms and kernals?
Many thanks
Faggy said:
Hi all,
Firstly sorry, you must get this all the time and be really bored of helping but i would be so grateful if anyone out there can point me in the right direction.
Firstly my phone details;
Model - Xperia Z2 D6503
Firmware - 1278-4770_23.0.1.a.3.9
Network - EE
Rooting status;
Bootloader unlock allowed: No
I want to root my phone but after reading what seems like thousands of web pages im more than a little confused. Does anyone out there have a step by step guide for beginners?
I want to use cwm recovery but don't understand how to get that on the phone as most guides say use it to back up before doing anything else but it isn't there to start with!
Also will installing cwm wipe my phone and sd card?
Any help would be much appreciated and many thanks in advance.
Click to expand...
Click to collapse
Faggy said:
Thanks for the response.
Is nuts recovery better or worse than cwm? Also i thought that towel root would not work with 4.4.4 at present?
Does the locked bootloader mean i cannot do certain things even after rooting my phone like install custom roms and kernals?
Many thanks
Click to expand...
Click to collapse
1) You cannot root the firmware you are on with a one click tool (like towelroot) at present. You have to downgrade to a lower firmware like 17.1.2.A.0.314 first and then root that, install a custom recovery and install a pre-rooted firmware package.
2) Your bootloader is hard locked by EE, this means that you will never be able to unlock it and install custom kernels nor custom ROM's what require custom kernels.
3) It is more than recommended to install [NUT]'s dual recovery, this installs PhilZ recovery (a more advanced CWM in my opinion), TWRP and CWM (to use CWM you have to install dual recovery manager from google play AFTER installing the dual recovery).
4) Now to downgrading, you will need to download a program called flashtool (this can be found in the Sony Cross Device development section) and the .314 ftf file (not .tft, ,ttf, .fft or any other variation people mis-spell it as). You will then need to install the drivers for your phone (these can be found in the flashtool drivers folder in the location you installed it, also if you have Windows 8 or 8.1 check my signature on how to disable driver enforcement before attempting to install the drivers.) There are plenty of guides on how to downgrade, there is even one in the firmware collection thread what can be found in the Z2 general section. Side note, when downgrading you will HAVE to wipe data and the cache (this can be selected when you are selecting the firmware to flash) or else you will end up with a phone what is in a bootloop.
5) After downgrading you will need to root, the easiest and simplest way to root would to be use the easy root toolkit (this can be found in the Sony Cross Device development section).
6) After rooting you will have to install [NUT]'s dual recovery (Sony Cross Device development section, you will need the installer file and not the flashable file).
7) After installing dual recovery you will need to flash a pre-rooted zip file of the latest update (Z2 Android Development section, I think the one by @niaboc79 is the best one to use). Alternatively you could install a custom ROM what is based on stock, it will tell you if it is.
If you need any more help, just tag me in the post (by using the @ symbol and then my user name) or PM me. Also, @Envious_Data is a great help in this device forum, helped me when I had a few queries about the phone before I got it and I have seen them help a load of people in the Q&A section.
@gamer649 Thank you for taking the time to help me, that has explained everything perfectly. I do however have a couple more questions i think you'll know about....
1 - Is there a back up app available that will do a similar back up to that of "apple". I mean reinstall all the apps i currently have and keep the home screen layouts and all data etc?
2 - In the link to the firmware downloads you gave me there is only 2 UK .314 ones and none of them are EE, shiuld i just use the unbranded one and what are the differences?
3 - The main reason i started looking into rooting was that i heard about a tweak to increase the volume of the z2 notifications by forcing it to use both speakers. Have you had any expierience with it and what other tweaks would you recomend?
Thanks again and i look forward to hearing from you again
Faggy said:
@gamer649 Thank you for taking the time to help me, that has explained everything perfectly. I do however have a couple more questions i think you'll know about....
1 - Is there a back up app available that will do a similar back up to that of "apple". I mean reinstall all the apps i currently have and keep the home screen layouts and all data etc?
2 - In the link to the firmware downloads you gave me there is only 2 UK .314 ones and none of them are EE, shiuld i just use the unbranded one and what are the differences?
3 - The main reason i started looking into rooting was that i heard about a tweak to increase the volume of the z2 notifications by forcing it to use both speakers. Have you had any expierience with it and what other tweaks would you recomend?
Thanks again and i look forward to hearing from you again
Click to expand...
Click to collapse
1) You could try using the stock back up and restore app for that. Also, if you have your data backed up with your Google account it will start to reinstall all your apps along with their data once you sign in once you downgrade. @Envious_Data any other suggestions for a non-rooted device?
2) I always go for unbranded software, the reason being that there are no carrier apps nor carrier boot logos installed into the ROM and it is how Sony intended it to be. Apart from that I don't think there are any differences.
3) I don't usually have my phone on sound mode, it is either silent or vibrate so I can't help you with that one. You could take a look in the Z2 android development section to see what mods are available, some ROM's may also include this feature.
gamer649 said:
1) You could try using the stock back up and restore app for that. Also, if you have your data backed up with your Google account it will start to reinstall all your apps along with their data once you sign in once you downgrade. Envious_Data any other suggestions for a non-rooted device?
2) I always go for unbranded software, the reason being that there are no carrier apps nor carrier boot logos installed into the ROM and it is how Sony intended it to be. Apart from that I dont think there are any differences.
3) I dont usually have my phone on sound mode, it is either silent or vibrate so I cant help you with that one. You could take a look in the Z2 android development section to see what mods are available, some ROMs may also include this feature.
Click to expand...
Click to collapse
1. You can use root to copy all of your apps from /data/app and you can use flashtool to bulk install all of them
2. Branded firmwares occasionaly have some small changes for better reception on the selcted network but with 314 this doesnt actualy matter
3. Have a look around for some mods, and see if they are compatible with your current firmware version

New to rooting, cant flash the firmware

Hi guys. Im not going to lie, im a noob when it comes to rooting, so I turned here to ask for help. Now, let me explain my whole issue. Lets start with, i cant unlock my bootloader. I also cant get into flash mode on flashtool which would allow me to downgrade, and and then root my phone from there. So yeah, I cant do anything honestly. I would love it if someone would be kind enough to help me with a step by step instruction guide, or even live assistance?. I already google'd for about 2-3 hours now, and can't find anything. Any help would be greatly appreciated!
white5pirit said:
Hi guys. Im not going to lie, im a noob when it comes to rooting, so I turned here to ask for help. Now, let me explain my whole issue. Lets start with, i cant unlock my bootloader. I also cant get into flash mode on flashtool which would allow me to downgrade, and and then root my phone from there. So yeah, I cant do anything honestly. I would love it if someone would be kind enough to help me with a step by step instruction guide, or even live assistance?. I already google'd for about 2-3 hours now, and can't find anything. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Mention 'EveryThing' about your phone. You can Take a screenshot of 'About Phone' and post it here.
Thanks for the reply!
I have attached a screenshot of what the window looks like.
"prntscr DOT com/8ffqdz" Sorry for the link, but I wasnt able to post it through the img tag.
Oh I also forgot to mention, just this morning I could root my phone with Kingo Root, but reading some negative stuff about it, I would still like to root it with the standard, old method of flashing etc, and I can't do some things I could on standard root.
white5pirit said:
Thanks for the reply!
I have attached a screenshot of what the window looks like.
"prntscr DOT com/8ffqdz" Sorry for the link, but I wasnt able to post it through the img tag.
Oh I also forgot to mention, just this morning I could root my phone with Kingo Root, but reading some negative stuff about it, I would still like to root it with the standard, old method of flashing etc, and I can't do some things I could on standard root.
Click to expand...
Click to collapse
Well, it's Xperia M2.
Let me clear that,
There are two types of Rooting methods available.
1. Permanent root
(Root access is available for ever, untill you unroot manually)
2. Temporary root
(Root access is gone, when you restart phone)
So, if you have successfully rooted your phone with Kingo Root, you no need to flash rooted kernel or firmware (its same with already root access available).
After rooting, you must have seen a app SuperSU or SuperUser or anyother that manages root permissions requested by apps that needs root (you need to grant permissions to let app work). If you do not see such any app, download it from play store.
I usually suggest Xperia users to root their devices with TowelRoot app. It is smart and simple and it does not contain any preloaded app for permissions (that means you can switch with SuperSU or Superuser)
Also, what things you could not do? let me know. I'll help you out
Regards,
hitman-xda
hitman-xda said:
Well, it's Xperia M2.
Let me clear that,
There are two types of Rooting methods available.
1. Permanent root
(Root access is available for ever, untill you unroot manually)
2. Temporary root
(Root access is gone, when you restart phone)
So, if you have successfully rooted your phone with Kingo Root, you no need to flash rooted kernel or firmware (its same with already root access available).
After rooting, you must have seen a app SuperSU or SuperUser or anyother that manages root permissions requested by apps that needs root (you need to grant permissions to let app work). If you do not see such any app, download it from play store.
I usually suggest Xperia users to root their devices with TowelRoot app. It is smart and simple and it does not contain any preloaded app for permissions (that means you can switch with SuperSU or Superuser)
Also, what things you could not do? let me know. I'll help you out
Regards,
hitman-xda
Click to expand...
Click to collapse
Again, thanks for the reply. Yup, I saw the SuperUser app, and the problems I have might not be phone breaking and such, but I would like to be able to do things like, change permissions of certain folders, which i cant do with the Kingo root, as it somehow denies the access to the folder, even tho I allowed root browser/es file manager root access. Overall, i think the problem is with the permission system Kingo has. I'd also like to mention that i would love to install Cyanogenmod on my device, but I will look into that myself @edit: Also, I would prefer to have a premanent root, instead of the towelroot and such.
white5pirit said:
Again, thanks for the reply. Yup, I saw the SuperUser app, and the problems I have might not be phone breaking and such, but I would like to be able to do things like, change permissions of certain folders, which i cant do with the Kingo root, as it somehow denies the access to the folder, even tho I allowed root browser/es file manager root access. Overall, i think the problem is with the permission system Kingo has. I'd also like to mention that i would love to install Cyanogenmod on my device, but I will look into that myself @edit: Also, I would prefer to have a premanent root, instead of the towelroot and such.
Click to expand...
Click to collapse
You could just press the 'thumbs up' instead writing 'thanks' everytime.
Well, why do you want to change the permissions of the folders? You could mess-up your device if you change permissions for the root folders.
The problem looks strange. If you have rooted successfully and GRANTED permissions for ES file explorer through SuperUser, you should not get any problem changing permissions. Check in SuperUser app that you see ES file explorer.
Also try using other explorer app. I use 'Solid Explorer' and its great.
If you have temporarily rooted your device as I mentioned in above post, try using TowelRoot app for rooting your device permanently and manually download SuperSU.
If you want to use CyanogenMod (it'll be pre-rooted) you need to carry below steps;
1. Unlock your Bootloader
(Wipes everything)
2. Install recovery.
3. Take stock ROM backup.
4. Flash ROM.zip
5. Flash GApps (optional)
6. Wipe cache+dalvic+factory reset
7. Reboot
Regards,
hitman-xda
Problem is that my bootloader can't be unlocked. I guess there is literally no way in which i can unlock it then?
white5pirit said:
Problem is that my bootloader can't be unlocked. I guess there is literally no way in which i can unlock it then?
Click to expand...
Click to collapse
If your bootloader status says
'unlock bootloader allowed = NO'
Then you can't flash anything on your phone. Almost every ROM needs an unlocked bootloader. There will be some ROMs that can be flashed over locked bootloader but they will be stock based.
EDIT: You have a good Luck, you can flash recovery on Locked bootloader
http://forum.xda-developers.com/xperia-m2/development/d2303-clockworkmod-6-0-4-6-t3011821
If you flash recovery successfully, that means you can flash ROM
Check below link for ROMs Available;
http://forum.xda-developers.com/xperia-m2/development
Regards,
hitman-xda
Yup, my bootloader says it can't be unlocked. Anyways, i tried the link yo usent me, but it comes up with an error, saying "device not found". I went into recovery mode on my phone, but i assume it might be the adb driver issue? I will try to reinstall it, and get back to you.
@edit: I reinstalled the ADB drivers, and now CWM is stuck on "daemon succesfully started", but it will not do anything else. Any clue as to what could I do to fix this? @edit2: Actually, disregard what i said. It still comes up as" Device not found"
white5pirit said:
Yup, my bootloader says it can't be unlocked. Anyways, i tried the link yo usent me, but it comes up with an error, saying "device not found". I went into recovery mode on my phone, but i assume it might be the adb driver issue? I will try to reinstall it, and get back to you.
@edit: I reinstalled the ADB drivers, and now CWM is stuck on "daemon succesfully started", but it will not do anything else. Any clue as to what could I do to fix this? @edit2: Actually, disregard what i said. It still comes up as" Device not found"
Click to expand...
Click to collapse
It can be a drivers issue. Install PC companion and connect your phone, let PCC install essential drivers and after that follow the same steps for installing recovery.
If you post any screenshot, that would be better.
Mkay, it worked now after i reinstalled the device in Sony PC companion. Heres a screenshot of what the CWM cmd window looks like: "prntscr DOT com/8fth1u". I assume this is good? So, all i have to do now is just download Cyanogen Mod and flash it, right?
white5pirit said:
Mkay, it worked now after i reinstalled the device in Sony PC companion. Heres a screenshot of what the CWM cmd window looks like: "prntscr DOT com/8fth1u". I assume this is good? So, all i have to do now is just download Cyanogen Mod and flash it, right?
Click to expand...
Click to collapse
Yup! Everything looks good. Just try to enter into recovery before downloading CM.
1.Switch off your phone and wait for 10 sec
2. switch on
3. When you see LED, try pressing either of vol buttons.
Hate to rain on the parade, but CM and CM based roms don't work with locked bootloaders for that phone, despite having CWM. It should say in the title of the thread whether it'll work with locked bootloaders.
es0tericcha0s said:
Hate to rain on the parade, but CM and CM based roms don't work with locked bootloaders for that phone, despite having CWM. It should say in the title of the thread whether it'll work with locked bootloaders.
Click to expand...
Click to collapse
Yeah you are right! Purely CM doesn't work on locked bootloader. But there must be any ROM available that is based on CM or even other ROMs that has some CM features.
I went through a few threads in that forum, Omni, CM, PAC, etc and all mentioned needing unlocked bootloader. Best bet is a good stock rom and Xposed to enable other features.
es0tericcha0s said:
I went through a few threads in that forum, Omni, CM, PAC, etc and all mentioned needing unlocked bootloader. Best bet is a good stock rom and Xposed to enable other features.
Click to expand...
Click to collapse
Z4 experience looks great ;
http://forum.xda-developers.com/xperia-m2/development/rom-z4-experience-locked-unlocked-bl-t3079811
Your xposed idea is great. Plus there must be GravityBox

Coolpad Y82-820 Help

Hi all!
I'm new here, so please instruct me if I'm doing anything wrong.
I have a Coolpad Y82-820. It's a Chinese phone, I think.
I'm in the process of getting it rooted. ---- Was rooted before, but an update on their side (to CoolUI V24. [phone model#]. 160407) removed the root and now makes it a bit difficult to root at the moment, though I'm sure it will be done eventually. For those who have this phone, I'd suggest not to update, as this update deletes any rooting applications installed on reboot/restart.
Once rooted, I don't really mind waiting, I would like to put a Custom Rom on this phone, but not sure what options are available. I see posts about the Coolpad Note/Dazen/Shine/Rogues etc. Though nothing about this one, though spec wise it's not too far off from the others.
I'd be grateful if anyone could help with confirmations, information, on how to select a correct custom rom for this device and the steps to do. Also if there's any info on how to root this current version, even better.
Thanks!
Some details of the phone below:
Model Number
Coolpad Y82-820
CPU
Qualcomm Technologies, Inc MSM8916 Quad-core 1.2 GHz
RAM
2G
Internal memory
Total 8G
Resolution
960 * 540
Android version
4.4.4
Kernel version
3.10.28
[email protected] #1
Thu Apr 7 17:01:56 CST 2016
Build number
4.4.005.150730.Y82_820
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Johny2k9 said:
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Click to expand...
Click to collapse
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Røbin said:
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Click to expand...
Click to collapse
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Johny2k9 said:
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Click to expand...
Click to collapse
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Røbin said:
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Click to expand...
Click to collapse
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Johny2k9 said:
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Click to expand...
Click to collapse
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Røbin said:
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Click to expand...
Click to collapse
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿,所以这个汉字我都明白了,如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Johny2k9 said:
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿,所以这个汉字我都明白了,如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Click to expand...
Click to collapse
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Røbin said:
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Click to expand...
Click to collapse
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Johny2k9 said:
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Click to expand...
Click to collapse
There's no available firmware to downgrade. Bad luck for you.
Røbin said:
There's no available firmware to downgrade. Bad luck for you.
Click to expand...
Click to collapse
Is upgrade impossible without rooting?
Johny2k9 said:
Is upgrade impossible without rooting?
Click to expand...
Click to collapse
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Røbin said:
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Click to expand...
Click to collapse
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Johny2k9 said:
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Click to expand...
Click to collapse
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Røbin said:
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Click to expand...
Click to collapse
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Johny2k9 said:
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Click to expand...
Click to collapse
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Røbin said:
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Click to expand...
Click to collapse
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Johny2k9 said:
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Click to expand...
Click to collapse
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Røbin said:
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Click to expand...
Click to collapse
Installed Xposed Installer, but the Download section is empty.
I am in China currently, so a lot of things may be blocked. A VPN should fix this, I believe.
What things I should install. Xposed Installer is new to me.

First smartphone first week Please help install rom

So i just decided to join the rest of the world and get myself a rectangle. so i researched the 1 to 200 dollar range for weeks until i found my new shiny metal friend with great specs and a price that wouldn't keep me up at night. the le max 2 x829. but i love tech and was really looking forward to pushing this phone and learn about all it could do! i was really excited.
Until i started to learn about the many confusing programs needed to install custom roms or make a recovery file. things like that All of which need like 6 different programs all of which seem to need some other program in order to functional. I can't seem to even find a starting point! I HAVE NEVER FELT THIS STUPID IN MY ENTIRE LIFE. Someone please help. what programs do i need for a new os ? How does adb fit into the chain of programs needed to mod android? is twrp the first program needed? how does it all sort...fit to gather? Thanks for any help!
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
valy_cta said:
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
Click to expand...
Click to collapse
including adb? what other drivers do i need? xposed? supersu? ...i have done my research by the way...its just not making alot of sense..thats all. i know all you old pros have probably been at it for years but i never even held a smartphone until 6 days ago ha ha
valy_cta said:
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
Click to expand...
Click to collapse
Also how do you download twrp on you're pc ? it won't let me i have it on my phone but it just keeps leading me to a website to download again.
Serialjwalker said:
Also how do you download twrp on you're pc ? it won't let me i have it on my phone but it just keeps leading me to a website to download again.
Click to expand...
Click to collapse
Do you have it installed on the phone or just downloaded? If it's installed, jump over that step. If it's just downloaded, connect the phone to the pc by cable, transfer the files :cyclops:
I understand your concern. It's because there are a few ways of doing it, and so novices might be confused when comparing two different tutorials.
This one is very complete: https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
1. Connect your phone, it is supposed to install drivers automatically.
1.1 If not, you'll need to google it, but I believe this toolkit will help you. In fact, this tool is capable of doing all the process for you by simply clicking on some buttons.​2. Install ADB Drivers. There are a few options and it is basically
2.1 @greenManGaming recommends 15 seconds ADB installer.
2.2 (Alternative) Minimal ADB and Fastboot. I've used this one.
2.3 (Alternative) ADB and Fastboot (newer) or Universal ADB and Fastboot (older) from the same dev.
OBS: I'm not sure if the toolkit requires or not one of these options to work properly or if it already does this task.​3. Download TWRP (on your computer).
3.1 Follow the instructions from the official page. In short, put the img into the ADB folder.​4. Follow the commands in the the tutorial mentioned.
4.1 In short, unlock the bootloader, boot twrp, complete backup, reboot into the system, copy the backup to your PC/Cloud service, get back to fastboot mode, flash twrp, then flash your ROM.
OBS: Suggestion for only booting TWRP at the first time is perfectly optional, you can flash it since the beginning but in this case you wouldn't be able to backup the original recovery and everything as the phone came, in case you need go back to request an RMA.​
razmth said:
I understand your concern. It's because there are a few ways of doing it, and so novices might be confused when comparing two different tutorials.
This one is very complete: https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
1. Connect your phone, it is supposed to install drivers automatically.
1.1 If not, you'll need to google it, but I believe this toolkit will help you. In fact, this tool is capable of doing all the process for you by simply clicking on some buttons.​2. Install ADB Drivers. There are a few options and it is basically
2.1 @greenManGaming recommends 15 seconds ADB installer.
2.2 (Alternative) Minimal ADB and Fastboot. I've used this one.
2.3 (Alternative) ADB and Fastboot (newer) or Universal ADB and Fastboot (older) from the same dev.
OBS: I'm not sure if the toolkit requires or not one of these options to work properly or if it already does this task.​3. Download TWRP (on your computer).
3.1 Follow the instructions from the official page. In short, put the img into the ADB folder.​4. Follow the commands in the the tutorial mentioned.
4.1 In short, unlock the bootloader, boot twrp, complete backup, reboot into the system, copy the backup to your PC/Cloud service, get back to fastboot mode, flash twrp, then flash your ROM.
OBS: Suggestion for only booting TWRP at the first time is perfectly optional, you can flash it since the beginning but in this case you wouldn't be able to backup the original recovery and everything as the phone came, in case you need go back to request an RMA.​
Click to expand...
Click to collapse
more questions....twrp will only load onto my phone and not my pc? also there are no adb driver folders just an exe. what do i do about that?
someone tell me how to delete this thread...i am just going to sell my smartphone i can't look at it anymore. every thing i try to do with it it resists every single inch of the way. nothing works according to instructions. i thought this would be fun but its hell... i give up! ...it wins going to trade this thing for the first 30 dollar burner phone i can find
Huge drama for nothing. Sell the thing, it's obviously not for you. If you can't follow some simple instructions, then it's better to sell it to some guy who likes to try at least.
valy_cta said:
Huge drama for nothing. Sell the thing, it's obviously not for you. If you can't follow some simple instructions, then it's better to sell it to some guy who likes to try at least.
Click to expand...
Click to collapse
maybe they are laid out to be simple but nothing is working as instructed. i have been at it for a week . so far installing firefox is the best i can seem to do lol simple? theres nothing simple about the gangbang of programs you need to do stuff on these phones. none of which can actually be compelled to function under any circumstances at least for me.
Serialjwalker said:
maybe they are laid out to be simple but nothing is working as instructed. i have been at it for a week . so far installing firefox is the best i can seem to do lol simple? theres nothing simple about the gangbang of programs you need to do stuff on these phones. none of which can actually be compelled to function under any circumstances at least for me.
Click to expand...
Click to collapse
If you are not familiar with giving commands with command prompt, installing drivers and needed software (android studio or minimal adb install) then you are in for a challenge, if you are not willing to learn its better to sell the phone or use it with de preinstalled android.
i find myself quite skilled( have flashed several brands of phoned in the last 5 years) and it took me a couple of days to figure out what to do and how to install twrp and my first rom, there are no one click shortcuts for this phone
Why need to install rom? It already work.
Serialjwalker said:
more questions....twrp will only load onto my phone and not my pc? also there are no adb driver folders just an exe. what do i do about that?
Click to expand...
Click to collapse
Did you try watching different videos to have a big picture of the process? It would be the first step. Even if you don't understand English, simply watch it. You'll see what would happen after each action.
Then check the written tutorial. Not a big issue at all. Really. Even for newbies, I've been one when I had a Galaxy 5, my first android that doesn't even needed to flash a custom ROM.
Whether you think you can, whether you think you can't, you're right.
The command to load the TWRP will be done on your PC, however, only your phone will load it. In short, you'll be commanding your phone through your PC.
When you install Minimal ADB and Fastboot, it will install its files in a default folder. Inside its default folder is where you should place the TWRP image.
Sent from my Le X820 using Tapatalk

Categories

Resources