I had my Ellipsis 7 Rooting using Framaroot and it was all going well until an OTA update came across. I knew I might loose root, but in SuperSU I had Survival Mode on, so I wanted to test it and see if it would work, but it ultimately didn't. What ended up happening is that after it had the "Android" logo show up it would go black, but stay backlit, and stay like that until the battery died. I took off the back to disconnect the battery and reconnect it then tried the Volume down + Power combo to reset the memory, but that only reset /data. If anyone knows where I can find a stock ROM, or if anyone has a working one that could create a flahsable .zip would be greatly appreciated.
Related
hello, my name is shahrukh and i need some help. i downloaded animmod (from 4shared) and then i donwloaded busybox. then i pressed blur and then it asked me if i want to reboot it. i pressed yes. this is when the problem starts. It turned off and then it turned on half way and then it turned off. it kept doing that and then i just left it for the night. in the morning it was not doing anything. when i held the power button it turned off and on for like two times and then turned off. i cant even start it up so i have no idea what to do.
i don"t know what to do
please help!!!!
Okay, we need details, describe exactly when "halfway on" is. We need your full model number and rom version (if you know it). Have you tried plugging it in to charge? Does it show anything now that you try to boot it? try holding volume up and powering on to enter recovery menu.
details
ok so when it turns on it says samsung. then after like 10 seconds it turns off. it does that for a few times and then it just goes in a black screen. the model number is YP-G7OC/NAW. when i plug it in to charge it goes on and off two times and then off. if it has low battery it just shows the sign. as for the rom i don't think i have any. i just rooted it using superoneclick. if it goes to recovery mode what do i do?
thanks!
(you got me really fired up when i saw the recovery menu!)
If you can get to recovery menu, try a factory reset, and clear cache. I am not sure if there is a recovery rom for your device, you should check samfirmware.com
tried both of them...no luck. and i couldn't find a recovery rom on samfrimware.com.
Your device has capacitive or mechanical home button?
it has a capacitive home button...the usa version
shahrukhraza said:
it has a capacitive home button...the usa version
Click to expand...
Click to collapse
The phone boots in recovery?
If so, I can investigate a little more what's happening.
I'll try to post a return-to-stock image soon... The problem is that mine is cluttered with crap that the zergRush exploit added (it insisted on installing busybox instead of just rooting...)
(I'm not sure, but I think someone else already posted a stock zImage and system image...)
Here is the post about fixing capacitive buttons. A quick search of forum should have found it.
http://forum.xda-developers.com/showthread.php?t=1421797
Sent from my YP-G70 using Tapatalk
nooooooo!!! you guys have all got it wrong. first of all it doesnt boot in recovery. the only way to get in recovery mode is when it shows the battery sign i hold "up volume"+ power button.and the capaciative button is completely fine. im just stuck in a bootloop (i think) and it has nothing to do with a broken capacitive button! i will try to post a video today to show you guys exactly whats happening.
i kind of had the same problem, one time i thought i had entropy's kernel on and i had CWM well i didn't but i still thought i had so i tried rebooting into recovery using the terminal:
su
reboot recovery
then i turned off and went to this weird recovery menu it had four options, reboot system, apply update from SD card, wipe data partition, and power off and it had a ton of red letters and words saying like, couldn't access data partition or cache partition and couldn't access /data/media, or system, and then i just turned it off because i wouldn't let me choose an option, and then i got stuck in a loop but not during when it says SAMSUNG mine happened during the animation music part that look like fireworks and then SAMSUNG would light up blue then go through it again and 2 more times then go black and i tried flashing the US stock ROM in download mode but still would go through the loop and it doesn't even charge so i got nothing
so did you somehow fix yours? and i never got a recovery menu that showed something about shut down.:confused
Before brick
xxxxxxxxxxxxxxxxx
wait....are you asking me those questions? just to tell you im no developer or something. im just a 12 year old who has his galaxy player stuck in a boot loop. you have to make another thread if you have a problem.
sorry!
Ok. : ) You got it wrong. No problem. His case is different from mine. Just wanted to use her Brick in case. Nothing more. good luck.
I resolve my doubts alone. Nothing that Google does not respond. haha
At least before brick.
ok. let me ask google too xD
anyways..anyone have any idea of how to fix this boot loop?
im trying to do the Linux thing by running the ressurector ans the VM windows the forum is posted under development called hard brick recovery for galaxy 5.0
ok.(i have no idea what you are saying...just saying!)
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
goplatinum said:
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
Click to expand...
Click to collapse
If it is hard bricked when connected to computer it will show up in device manager as QDUSB Device or something similar. You could try to do a factory reset with button combo, be sure phone is powered off then hold power and volume down until menu shows up.
You Can Also Try TeenyBin If Factory Reset Does Not Work
Regards,
acervenky,
XPT
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
goplatinum said:
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
Click to expand...
Click to collapse
Yes, you are not dead in the water. Proceed, young grasshopper.
Sent from my Optimus G using xda app-developers app
All the custom, unofficial 4.2.2 roms I found on XDA require that you be on the latest LG 4.1.2 OTA.
There are also links to stock rom and kernel so you don't have to mess with LGPT whatever. No need to do OTA etc, if you flash this.
http://forum.xda-developers.com/showthread.php?t=2219953
I also found TWRP to be far easier to install, which is installed by default I think with FreeGee. But you can find thread for the latest TWRP 2.6. TWRP makes flashing and wiping cache/dalvik super easy.
Ok, so i'm starting to think this is a battery issue as opposed to a hardware issue. i could still be wrong. I've flashed the stcok rom after stock rom. When i plug my phone into a computer usb port it LG logo boot loops (and this is the only way i can get to download mode), but when i plug it into the usb wall charger, i just get the red flashing light and no other response. when it's not plugged in i get nothing.It's still showing up as "LGE AndroidNet USB Serial Port" in my device manager and i can still get to dpownload mode just fine, so i know all isn't "according to what i've read and been told". So i'm running out of fixes. I did come accross a thread on here suggesting i unplug the battery and plug it back up. So i'll be getting the tools and praying that works.
I did also come across an interesting thread on another forum. They were saying how id you allowed your battery to drain all the way to true zero (which i think might be possible because my phone died in recovery mode), it wouldn't have enough juice to initiate and monitor the charging process. If this is the case, can the batter be brought back to life? a jump start or something (lol)? or will i have to just replace the battery?
THANK YOU SO MUCH FOR THE HELP SO FAR GUYS.
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
adfurgerson said:
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
Click to expand...
Click to collapse
i did a factory reset a few times, but it still never booted. and whenever i LGNPST, when it hits 67% the phone reboots and just starts bootlooping (if i flash a stock rom) if i LGNPST teenybin, at 67% the phone will shut off and the flashing red light will just come up. and after each a message will say phone was unplugged or lost connection. after both instances ill plug it back up and put it in download mode again to finish and it will complete, but the phone will just be sitting there in download mode. and if i reboot.... bootloop city.
i cam across this thread that seems to detail my issue perfectly. so i'm going to attempt a teenybin flash one more time to tryt to get recovery mode (havent been able to get it at all), and if that doesn't work i'm going to do a battery pull..
http://forum.xda-developers.com/showthread.php?t=2261803&highlight=battery
BATTERY UNPLUG WORK LIKE A CHARM. again, i followed the method [r.]GimP laid out here http://forum.xda-developers.com/showthread.php?p=43732147#post43732147
i was nervous because i've never opened my (or any other) phone before.
and thanks to the tot link provided by zymphad above, i'm now running jb 4.1.2
THANK YOU GUYS :highfive:
I found LG's camera lacking, but 4.2 has an update for that, plus the camera mod, much improved I think.
Running RootBox great now with 124mhz idle, GPU downclocked to 200 and CPU undervolted to 85, stable and cool. I don't 3d game on phones.
Glad you fixed it, I just hope someone makes a high capacity internal battery for us since taking it apart isn't that difficult.
Sent from my Optimus G using Tapatalk 4 Beta
hello everyone
this phone is NOWHERE... i cant believe how few people have this phone in the hacking community.
I've used a guide seen here
https://www.youtube.com/watch?v=BCiq21WsFEc
essentially I rooted it in KK successfully. Then I installed TWRP through the twrp app... installed successfully. no error.
Went to reboot, phone does not get past splash. Recovery instantly goes to black (powered off) screen with red LED (tells me the phone is kind of on.. but some serious hardware misunderstanding taking place.)
How can I restore the stock recovery? While it is in this no-display-red-light mode it appears on my computer in DFU... so I know it is possible to still get in there, but I cannot find anything about the stock recovery for this phone.
Can't believe ZTE has little to no support for this phone...
Possible solution
That video seemed to be for the newer model of the zte grand x, thats why its called grand x plus. I had tried it on my phone and it was like stuck in a power up loop, what i did to get out of it is to go into recovery mode by pressing and hold the power button plus the up volume button. One i got in there i just rebooted it. Try that out and see if it works. Im still looking around for a solid root for this phone
Has anyone else run into this?
Not rooted, stock. Took the OTA update. Took about 25 minutes to install. After the final restart it's stuck at the red verizon boot screen. Does not do any loops. I left it there at least an hour without any luck. It was fully charged before the update and remained plugged in. The verizon logo is animated and the notification LED cycles between green and blue.
I tried rebooting by power+volume down buttons. Reboots and gets stuck at the same screen. If I could get my hands on the verizon software update/upgrade assistant, I could put the phone into download mode and try it but I can't find the verizon assistant download anywhere. Plugging into a computer only results in the charge only device drivers to be installed so the upgrade assistant does not prompt to install.
Removed the SD card before my last reboot in case that was causing issues. No difference.
Factory Reset is the most common solution that works. For future reference, I wouldn't wait longer than 10-20 minutes tops on any device.
If that doesn't help, the green and blue LED could mean you'll have to use LG Flash Tool 2014 to re-flash the 35B KDZ if it'll let you.
I tried to see if it was maybe the good old uncleared cache bug that was around years ago. It wasn't...
As much as I didn't want to do it, Factory reset solved it.
Thank you.
Hello guys, I have run into a serious problem here! Please help me out..
I have a GFive President G9 Android running stock Jelly Bean 4.2.1 (ROOTED). I tried to install a boot animation through ROM Toolbox app, when I rebooted it, it didnt show any boot animation and booted straight to the home screen. So I just went into the ROM ToolBox app and restored the bootanimation backup I had created earlier to get the original GFive boot animation back.
However, when I rebooted, my phone showed the GFive Logo, and after it the screen went dark( The screen is backlit but doesnt display anything). It just stops there and doesnt do anything. Ive tried removing the battery but to no avail. For some reason I CAN'T ACCESS the RECOVERY or the DOWNLOAD MODE, as holding the power button and vol up etc still ends up in the same situation - Black backlit screen after logo. The phone isnt in a reboot loop or anything, it just stops at the black screen for eternity.
THE WORST PART, this phone probably has a damaged USB port, since I was previously able to charge it via the PC, but it wasnt detected in the PC. So I CANNOT CONNECT IT TO THE PC.
So is there anyway I could get this phone back alive? Is a factory reset possible? Please help me experts!! :crying:
P.S Custom TWRP is installed, but I cant access it
So there's no expert in this whole forum who has a solution for this? Because no reply means no one has an answer..
Incase theres no way out of this, please mention that.