Related
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
christiano9911 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
Click to expand...
Click to collapse
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
G.Ashwinkumar said:
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
Click to expand...
Click to collapse
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
eagledipesh said:
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
Click to expand...
Click to collapse
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
Click to expand...
Click to collapse
Will installing a fresh rom end my problem?
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
tried fix permission but nothing happenned.
where do i get the official rom?
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
Will installing a fresh rom end my problem?
Click to expand...
Click to collapse
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
christiano9911 said:
tried fix permission but nothing happenned.
where do i get the official rom?
Click to expand...
Click to collapse
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
eagledipesh said:
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
Click to expand...
Click to collapse
Flashed a cutom ROM through CWM now working fine.
G.Ashwinkumar said:
Flashed a cutom ROM through CWM now working fine.
Click to expand...
Click to collapse
Please press thanks if i have help you....
Micromax Canvas hd A116 is not getting started!
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
My micromax a50 not booting up
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
ronakandro said:
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
Click to expand...
Click to collapse
Yup....re install ur stock ROM and u r good to go
I'm not responsible if u brick ur device.. Hit thanks
Use Sp flash tool method instead of clockmode recovey
You should use SP flash Tool method For flashing Stock Rom,it is very safe and Trusted.
Help from Canvas HD
I faced the same problem. My battery got swollen and is of no use. Now I have switched to ERD battery. Not bad . but is not too good , because its only 1250 mAh. But , should tell you, is working for its worth.
Alka10 said:
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
Click to expand...
Click to collapse
Best available option take it to the service center, or try installing cwm recovery or your entire stock rom through Sp flashtools.
Brom error : S_da_sdmmc_write_failed
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
arungautam10 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
Click to expand...
Click to collapse
Are you admin ??
that's because the version of ur SP tool old.Google ' latest sp tool ' and get the version which is lyk 'v1.1.13' or so... it! I'll work...
Sent from my Micromax A116 using xda app-developers app
Plz help some mmx hd can't start
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum - key... Plz help...also not charging on switch off ...
If you have cwm just download from here and flash.... http://d-h.st/fXr
Sent from my Nexus 4 using XDA Premium 4 mobile app
I was flashing Custom ROM on my "Qmobile Noir A900" and ended up corrupting both ROM and recovery.
And my device is now stuck at a boot loop. Recovery mode is just a white screen and can't seem to go into bootloader mode either.
My Question is.. Is my device totally hard bricked or there's still some hope left?
I am new here and not sure if this is the right section. Sorry
Still no reply?
anAbbasi said:
Still no reply?
Click to expand...
Click to collapse
you can flash stock rom ,i think sold problem
download at http://www.needrom. com/mobile/purexperia-final-rom-for-elife-e3q-mobile-noir-a900/
tunglethanh90 said:
you can flash stock rom ,i think sold problem
Click to expand...
Click to collapse
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
anAbbasi said:
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
Click to expand...
Click to collapse
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Thanks a bunch mate. I did a little research on SP Flash Tool and MTK Chipsets.
I have Formatted whole device using Flash Tool. Now I am going to flash GM Discovery Stock ROM.
Will let you know how it goes.
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
anAbbasi said:
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
Click to expand...
Click to collapse
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
tunglethanh90 said:
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
Click to expand...
Click to collapse
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
anAbbasi said:
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
Click to expand...
Click to collapse
Try with here
Select firmware upgrade
Post result
tunglethanh90 said:
Try with here
Select firmware upgrade
Post result
Click to expand...
Click to collapse
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
anAbbasi said:
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
Click to expand...
Click to collapse
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
anAbbasi said:
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
Click to expand...
Click to collapse
you download and flash firmware ,post result
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
anAbbasi said:
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
Click to expand...
Click to collapse
Try Hard reset
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
anAbbasi said:
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
Click to expand...
Click to collapse
Ok , Thks
By the way, where did you get that Backup from?
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Hey,
Though this thread is old and dead now, but i must thank tunglethanh90 for providing the stock Rom (spflash version) of A900. I was having problem with my A900 and found stock rom on needrom site, flashed it and my cell went in to bootloop. I didn't have SPFlash or MTK backup only CWM backup which was no good. I used this ROM provided by tunglethanh90 and i was successful in making my set alive again. Afterwards, i got the problem of invalid IMEI. For that i installed CWM recovery and restored my cwm stock rom backup that i took and saved ealier. All good now but making my set alive again is due to tunglethanh90. Thank You Sir .... So heads up for any guy having QMobile A900 Rom issue, this is what u need to download, dont dl from needrom as its no go.
Regards.
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
Vibe 2.0 can power on ? waiting for someone help you, i need to know too
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
why dont you flash TWRP or CWM via mobile uncle tool (available on playstore). follow this threade
original recovery will check MD5 and it will abort if verification fails.
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
mistajoe83 said:
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
Click to expand...
Click to collapse
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
NISHANTJ_2K said:
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
Click to expand...
Click to collapse
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
mistajoe83 said:
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
Click to expand...
Click to collapse
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
Just Google it and u will find a site where u can download vibe ui 2.0 (by baraljabi)and its prerooted
Sent from my Lenovo P780 using XDA Free mobile app
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
KITKAT firmware here!
IN My canvas a311 I cant flash any rok... I tried flame os and recrussion but non of them worked
Its showing failed....
Plz help I dnt hv any backup so cant swith on my fon....... .
Or least tell me how to flash stock rom.... Plzzz
Flash new twrp
[email protected] said:
IN My canvas a311 I cant flash any rok... I tried flame os and recrussion but non of them worked
Its showing failed....
Plz help I dnt hv any backup so cant swith on my fon....... .
Or least tell me how to flash stock rom.... Plzzz
Click to expand...
Click to collapse
Follow this guide link
same problem MMX a310..canvas nitro
[email protected] said:
IN My canvas a311 I cant flash any rok... I tried flame os and recrussion but non of them worked
Its showing failed....
Plz help I dnt hv any backup so cant swith on my fon....... .
Or least tell me how to flash stock rom.... Plzzz
Click to expand...
Click to collapse
I too tried twrp. Using mobile uncle app ..but my mobile goes into a bootloop ..I removed the battery ..place it back ..phone turned on but ...my baseband was gone.. No imei was there ..i though resetting might work ..but when booted into recovery mode ...it was the stock recovery and ..it was not working ..nothing happed when I selected factory reset ....now .I m not able to install any new recovery.. Nothing can be falshed ..and more over nither sp tool nor ygdp tool are working for me....I thought of setting imei through.. Mtk engineering mode ..but there also radio was off ..and I was not able to turn it on .....help any one
A few days ago I was using AOSP CAF rom, jio signal was fluctuating, so I changed to nitrogen os, after using it for couple of days signal was turning off, but now SIM card isn't working anymore. I tried many roms, it was ok for an hour and then same problem. Now even changing rom also not working anymore.
I tried many firmware, newer and the ones I used before, (psy-man, reemar and others' too) it's not detecting anymore.
flash your efs and modem partitions from your nandroid backup through recovery
aizen_souske said:
flash your efs and modem partitions from your nandroid backup through recovery
Click to expand...
Click to collapse
I did that many times. Alka twrp restores the modem on firmware partition.
The problem is still there.
BTW is there any modem img or any flashable modem available? I've seen on Alka, it gives a choice to flash image on modem.
Switch off ur phone, insert 1 sim first thn reboot... Then just remove sim tray n insert both Sims... If signal still don't come thn reboot again..
kurogami95 said:
I did that many times. Alka twrp restores the modem on firmware partition.
The problem is still there.
BTW is there any modem img or any flashable modem available? I've seen on Alka, it gives a choice to flash image on modem.
Click to expand...
Click to collapse
if u have unlocked.officially.you can always flash fastboot rom. in fastboot mode using miflash tool..or you can flash through edl.mode as well..those will clean out any damage done to your device software vise
aizen_souske said:
if u have unlocked.officially.you can always flash fastboot rom. in fastboot mode using miflash tool..or you can flash through edl.mode as well..those will clean out any damage done to your device software vise
Click to expand...
Click to collapse
Flashed miui today. So far it's not giving me problems. Sim did not detected on first boot, rebooting fixed it. Since then no problem occurred.
Aditya1011 said:
Switch off ur phone, insert 1 sim first thn reboot... Then just remove sim tray n insert both Sims... If signal still don't come thn reboot again..
Click to expand...
Click to collapse
I can't do that, SIM tray is stuck coz I tried dual SIM + SD card trick, and failed miserably.
kurogami95 said:
I can't do that, SIM tray is stuck coz I tried dual SIM + SD card trick, and failed miserably.
Click to expand...
Click to collapse
U r in trouble bro and it will cost u money...
Aditya1011 said:
U r in trouble bro and it will cost u money...
Click to expand...
Click to collapse
I tried to do that myself yesterday. I pulled my SIM slot, and the disappearing SIM card is OK now. But I bended my rear panel. I need to find a replacement now ?.
flash kenzo firmware
I also faced same problem when I unofficially unlocked my bootloader, turns out you just need to flash the latest non-hlos.bin file from your respective fastboot rom. And if you face invalid Imei then just Google it( I don't remember what I did ?) . You should be good to go if it's not a hardware issue.