I have a build environment that works fine when building Froyo, but when I pull down the Eclair repo from Cyanogen and try to build it for my Passion/NexusOne, it dies on BusyBox. Even if I fix the BusyBox errors below by hand modifying the code, my build still ends at "kernel-msm"... am I missing something? I have followed the instructions from the Cyanogen Wiki to a tee multiple times now, and no dice.
Thanks!
debug output:
host Executable: yuv420sp2rgb (out/host/linux-x86/obj/EXECUTABLES/yuv420sp2rgb_intermediates/yuv420sp2rgb)
true
host Executable: zipalign (out/host/linux-x86/obj/EXECUTABLES/zipalign_intermediates/zipalign)
target StaticLib: libc (out/target/product/passion/obj/STATIC_LIBRARIES/libc_intermediates/libc.a)
true
host SharedLib: libacc (out/host/linux-x86/obj/lib/libacc.so)
target thumb C: libbusybox <= external/busybox/shell/ash.c
target thumb C: libbusybox <= external/busybox/shell/math.c
external/busybox/shell/ash.c: In function 'subevalvar':
external/busybox/shell/ash.c:6163: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c:6324: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c:6326: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c: In function 'printlim':
external/busybox/shell/ash.c:12714: error: 'rlim_t' undeclared (first use in this function)
external/busybox/shell/ash.c:12714: error: (Each undeclared identifier is reported only once
external/busybox/shell/ash.c:12714: error: for each function it appears in.)
external/busybox/shell/ash.c:12714: error: expected ';' before 'val'
external/busybox/shell/ash.c:12716: error: 'val' undeclared (first use in this function)
external/busybox/shell/ash.c: In function 'ulimitcmd':
external/busybox/shell/ash.c:12731: error: 'rlim_t' undeclared (first use in this function)
external/busybox/shell/ash.c:12731: error: expected ';' before 'val'
external/busybox/shell/ash.c:12792: error: 'val' undeclared (first use in this function)
make: *** [out/target/product/passion/obj/STATIC_LIBRARIES/libbusybox_intermediates/shell/ash.o] Error 1
make: *** Waiting for unfinished jobs....
cd external/busybox
git checkout d0194cfc47a71a65e049
Much obliged, Maxisma. That did it!
No problem ;-)
it should be fixed now. We made a Froyo branch.
Hi i'm trying to build ICS Source but i'm getting this error:
HTML:
make: *** No rule to make target `out/target/product/ace/obj/STATIC_LIBRARIES/libaudiointerface_intermediates/libaudiointerface.a', needed by `out/target/product/ace/obj/SHARED_LIBRARIES/libaudio_intermediates/LINKED/libaudio.so'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C++: libaudio <= hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp
In file included from hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp:34:
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:51: error: expected class-name before '{' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:70: error: ISO C++ forbids declaration of 'AudioStreamOut' with no type
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:70: error: 'AudioStreamOut' declared as a 'virtual' field
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:70: error: expected ';' before '*' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:77: error: ISO C++ forbids declaration of 'AudioStreamIn' with no type
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:77: error: 'AudioStreamIn' declared as a 'virtual' field
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:77: error: expected ';' before '*' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:85: error: 'AudioStreamOut' has not been declared
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:86: error: 'AudioStreamIn' has not been declared
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:97: error: expected class-name before '{' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h: In member function 'virtual int android::AudioHardware::AudioStreamOutQ5V2::format() const':
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:110: error: 'AudioSystem' has not been declared
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h: In member function 'virtual uint32_t android::AudioHardware::AudioStreamOutQ5V2::latency() const':
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.h:111: error: 'frameSize' was not declared in this scope
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp: In destructor 'virtual android::AudioHardware::~AudioHardware()':
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp:53: error: 'AudioStreamOut' was not declared in this scope
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp:53: error: expected primary-expression before ')' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp: At global scope:
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp:62: error: expected constructor, destructor, or type conversion before '*' token
hardware/msm7k/libaudio-qdsp5v2/AudioHardware.cpp:341: error: expected '}' at end of input
make: *** [out/target/product/ace/obj/SHARED_LIBRARIES/libaudio_intermediates/AudioHardware.o] Error 1
i have tryed many things to fix this erro but no success
i hope some one can help me
bump
Sent from my SGH-T959 using xda premium
Many devs face this error and they are fighting with this.
I just started compiling android but did finish a successful build at 05:00am this morning and didn't get (or see) this error but, no i'm expert by any means..
Considering the error:
No rule to make target `out/target/product/ace/obj/STATIC_LIBRARIES/libaudiointerface_intermediates/libaudiointerface.a', needed by....
Click to expand...
Click to collapse
It literally says its missing something, the rule, so would it be an idea to resync repo perhaps ?
I resynced last night and there were no changes. But, yes, resyncing is important... You never know when Google will drop more source, and they may or may not announce it via mailinglist.
Inspire 4G // BlackICE
Try compiling for tuna/maguro/panda first
Also, try removing libaudio folder from device folder, and if your device has aosp then try using libaudio from there(assuming you are using device from cm7)
I also face with this error ... Maybe something is wrong in include/media
I'm getting this error for my passion.
Ive gotten a little farther by changing the namespace from android to android_audio_legacy as they did it hardware/libhardware_legacy/include/hardware_legacy/
Has anyone managed to fix this problem yet?
But it will still conpiling. Not a big problem. We can fix this later.
Sent from Xperia X10 Self-modded
I can't even seen to compile for tuna keep getting errors on llvm. I compile cm7 so my builds setup is good. Confused
texasice said:
I'm getting this error for my passion.
Ive gotten a little farther by changing the namespace from android to android_audio_legacy as they did it hardware/libhardware_legacy/include/hardware_legacy/
Click to expand...
Click to collapse
Could you pastebin the modded file or generate an .patch file for your change ?
@up I also face with llvm error Do someone have fixed that issue ?
mikegapinski said:
Could you pastebin the modded file or generate an .patch file for your change ?
@up I also face with llvm error Do someone have fixed that issue ?
Click to expand...
Click to collapse
in AudioHardware.h line 28 change :
Code:
namespace android {
as mentioned to :
Code:
namespace android_audio_legacy {
I tried it myself just by curiosity and it leads to these errors :
Code:
target thumb C++: libaudio <= hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp
In file included from hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:37:
hardware/msm7k/libaudio-qsd8k/AudioHardware.h:318: error: 'Mutex' does not name a type
hardware/msm7k/libaudio-qsd8k/AudioHardware.h:328: error: ISO C++ forbids declaration of 'SortedVector' with no type
hardware/msm7k/libaudio-qsd8k/AudioHardware.h:328: error: expected ';' before '<' token
hardware/msm7k/libaudio-qsd8k/AudioHardware.h:337: error: 'Mutex' does not name a type
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:92: error: 'AudioHardware' has not been declared
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:102: error: 'AudioHardware' has not been declared
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:102: error: ISO C++ forbids declaration of 'AudioHardware' with no type
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp: In function 'int android::AudioHardware()':
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:103: error: only constructors take base initializers
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:109: error: 'TTY_MODE_OFF' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:112: error: 'msm_bt_endpoint' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:112: error: expected primary-expression before ')' token
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:116: error: invalid type in declaration before ';' token
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:118: error: 'doA1026_init' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:124: error: 'mNumBTEndpoints' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:125: error: 'mInit' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:126: error: return-statement with no value, in function returning 'int'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:131: error: return-statement with no value, in function returning 'int'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:158: error: 'mNumBTEndpoints' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:160: error: 'mBTEndpoints' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:160: error: expected type-specifier before 'msm_bt_endpoint'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:160: error: expected ';' before 'msm_bt_endpoint'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:161: error: 'mInit' was not declared in this scope
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:164: error: expected primary-expression before 'int'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:164: error: expected ')' before 'int'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:167: error: return-statement with no value, in function returning 'int'
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:169: error: 'snd_get_bt_endpoint' cannot be used as a function
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:206: error: no return statement in function returning non-void
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp: At global scope:
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:208: error: expected constructor, destructor, or type conversion before '::' token
hardware/msm7k/libaudio-qsd8k/AudioHardware.cpp:2025: error: expected '}' at end of input
make: *** [out/target/product/passion/obj/SHARED_LIBRARIES/libaudio_intermediates/AudioHardware.o] Error 1
Any update on this? I had to add LOCAL_MODULE_TAGS := optional to some of the Android.mk to even reach that far. Faulty code from Google or am I doing something wrong myself?
Ive gotten past this by just removing the libaudio* folders from the Android.mk
It at least results in a system.img for the passion
In hardwark/msm7k/Android.mk
for mine qsd8k
from
Code:
common_msm_dirs := libcopybit liblights libopencorehw librpc libstagefrighthw
msm7k_dirs := $(common_msm_dirs) boot libgralloc libaudio
qsd8k_dirs := $(common_msm_dirs) libgralloc-qsd8k libaudio-qsd8k dspcrashd
msm7x30_dirs := liblights libgralloc-qsd8k librpc libaudio-qdsp5v2
to
Code:
common_msm_dirs := libcopybit liblights libopencorehw librpc libstagefrighthw
msm7k_dirs := $(common_msm_dirs) boot libgralloc libaudio
qsd8k_dirs := $(common_msm_dirs) dspcrashd
msm7x30_dirs := liblights libgralloc-qsd8k librpc libaudio-qdsp5v2
i also removed libgralloc cause it causes the screen to not work.
mikegapinski said:
Could you pastebin the modded file or generate an .patch file for your change ?
@up I also face with llvm error Do someone have fixed that issue ?
Click to expand...
Click to collapse
for go past llvm errors i've excluded -Werror in frameworks/compile/slang/Android.mk (local_cflags_for_slang line)
Fix, er, well, lets it build...
On the libaudio issue in msm7k for ICS:
Okay, after mucking around with it for a bit, it looks like it was an issue with namespaces, and things having the same name. So what I did to get it to compile is I went through and specified everything to use the android_audio_legacy namespace except for the things that needed to be on the android namespace.
I also slapped on a definition for 2 methods that were undefined. I do not know if it will work, but it does build.
My diff is here: http://pastebin.com/iP7FSa0C
Disclaimers:
C++ is not my primary language, actually, its not a language I know much of at all
I have not been able to test it, I can only verify that it builds, which I assume is better than having to remove the makefile.
I pretty much did the same thing as jbcode42
It builds but doesnt work.
http://pastebin.com/JGYBKfSs
I sow that libaudio.so is no more used in ICS i think ... Now it is an module under system/hw ex. audio.primary.goldfish ... We will need to wait for new soruces from CM or CA to get rid of the errors ...
lupohirp said:
for go past llvm errors i've excluded -Werror in frameworks/compile/slang/Android.mk (local_cflags_for_slang line)
Click to expand...
Click to collapse
Thanks for this. Any ideas why that error is coming up? It seems like others have got it to compile without modifications. What is everyone compiling on? I am on Ubuntu 11.10 with GCC 4.6.1
Hey guys,
I was hoping someone would be able to help me flash the NAND on the board. There are a couple avenues that I have taken, but I've gotten stuck right before completion each time. I have an image to flash, and access to the board via my 32-bit Linux PC.
The board that I have is the Olimex A13-OLinuXino-WiFi.
Here's the different methods I've attempted:
Using ADB
This is what I'm most familiar with. The only place I'm stuck is finding out what block to flash the image to.
From what I've heard...
Code:
/dev/block/nanda bootloader
/dev/block/nandc boot
/dev/block/nandg recovery
But, I have no clue if that applies to all A13's.
My assumption is to run the following code, but... that's what it is... an assumption. Anyone able to shed some light on this?
Code:
cat /sdcard/imagefile.img > /dev/block/nand<1?>
sync; sync; sync
echo -n boot | busybox dd of=/dev/block/nand<2?> count=1 conv=sync; sync
Using LiveSuit
LiveSuit is the toolset that AllWinner released for their A1X SoCs... the problem is it seems like they only have a Windows or 64-bit Linux version. Since I'm only on 32-bit Linux, I obviously can't compile it. I've searched everywhere for a 32-bit version
Using sunxi-tools
LiveSuit utilizes sunxi-tools to flash the board. However... I can't for the life of me find any documentation surrounding it or any type of process around how to flash the board. It's all a mystery. There are two tools that I have been told to look at: nand-part and fel*. nand-part is a tool to manage the NAND partitions, while fel is a tool for writing directly to the NAND (specifying blocks, start and size).
NAND Map Memory
Code:
-name- -start- -size-
bootloader : 100000 1000000
env : 1100000 200000
boot : 1300000 2000000
system : 3300000 10000000
data : 13300000 20000000
misc : 33300000 100000
recovery : 33400000 2000000
cache : 35400000 10000000
UDISK : 45400000 a8400000
Is it a safe assumption that these correspond with the blocks in /dev/block/?
As in, /dev/block/nanda = bootloader, /dev/block/nadab = env?
Using awutil
A new one! AllWinner Utilities has a tool called `awflash` which is supposed to be comparable to LiveSuit and flashes using the same method. The only problem is I can't get it to compile.
Code:
swivel-mac:awflash swivelgames$ make -k awflash
cc -I/Developer/Platforms/.de650d.245/.de650d.244/SDKs/iPhoneSimulator4.1.sdk/usr/include/pcap/ -L/usr/local/lib -Wall -o awflash awflash.c -lusb
awflash.c:67: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
awflash.c:114: warning: ‘struct usb_dev_handle’ declared inside parameter list
awflash.c:114: warning: its scope is only this definition or declaration, which is probably not what you want
awflash.c: In function ‘fex_xfer’:
awflash.c:137: warning: implicit declaration of function ‘usb_bulk_write’
awflash.c:144: warning: implicit declaration of function ‘usb_bulk_read’
awflash.c: At top level:
awflash.c:172: warning: ‘struct usb_dev_handle’ declared inside parameter list
awflash.c: In function ‘fex_command’:
awflash.c:174: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:182: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:199: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:209: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:221: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:230: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:240: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:245: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:257: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:274: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:280: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:296: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c: In function ‘main’:
awflash.c:358: warning: implicit declaration of function ‘usb_init’
awflash.c:360: warning: implicit declaration of function ‘usb_set_debug’
awflash.c:362: warning: implicit declaration of function ‘locate_device’
awflash.c:362: warning: assignment makes pointer from integer without a cast
awflash.c:367: warning: implicit declaration of function ‘usb_set_configuration’
awflash.c:371: warning: implicit declaration of function ‘usb_claim_interface’
awflash.c:375: warning: implicit declaration of function ‘usb_set_altinterface’
awflash.c:417: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:420: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
awflash.c:423: warning: passing argument 1 of ‘fex_xfer’ from incompatible pointer type
make: *** [awflash] Error 1
Anyone able to help me out with any of these methods? You would think with four options there would be SOME sort of resource or documentation out there to help me out. But, you know...
Any help would be appreciated!
I finally got `awflash` to compile! Turned out none of my usb libs had usb_dev_handle in them. I had to use MacPorts to install libusb-legacy and that worked perfectly. After wrestling with the makefile a little bit to force it to see the library (lol) it finally built.
I'll search around for awflash documentation so I can become a bit familiar with it before blindly flashing it.
If anyone has any resources or documentation surrounding awflash, that'd be a huge help.
Hi Everyone
I am fairly new to android customisation, rooting, etc. and have been playing around with creating a custom CyanogenMod kernel to support a TP-Link USB wifi dongle.
The primary reference article for this can be found here - http://forum.xda-developers.com/showthread.php?t=2338179. However I have made some changes as listed below.
Keen to hack this further and any advice or guidance will be greatly appreciated.
Technical Spec:
Ubuntu 12.04 (32 Bit)
Samsung S3 (Cyanogenmod ROM)
Kernel = https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
.config = https://github.com/CyanogenMod/andr.../arch/arm/configs/cyanogenmod_i9300_defconfig
Note - There is no /proc/config.gz on my device, hence the above use of the config.
gcc-arm-linux-gnueabi libstdc++6 libncurses5 libncurses5-dev - exports correctly setup.
Objective
Getting an TP-Link TL-WN821N USB Wifi Dongle to work.
The relevant drivers are already available in mac80211 - http://www.aircrack-ng.org/doku.php?id=mac80211
Error Message
CC net/mac80211/agg-rx.o
CC net/mac80211/ibss.o
CC net/mac80211/mlme.o
net/mac80211/mlme.c: In function ‘ieee80211_mgd_auth’:
net/mac80211/mlme.c:2317:9: error: ‘struct cfg80211_auth_request’ has no member named ‘local_state_change’
net/mac80211/mlme.c: In function ‘ieee80211_assoc_done’:
net/mac80211/mlme.c:2419:2: warning: passing argument 2 of ‘cfg80211_send_rx_assoc’ from incompatible pointer type [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘struct cfg80211_bss *’ but argument is of type ‘unsigned char *’
net/mac80211/mlme.c:2419:2: warning: passing argument 3 of ‘cfg80211_send_rx_assoc’ makes pointer from integer without a cast [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘const u8 *’ but argument is of type ‘unsigned int’
net/mac80211/mlme.c:2419:2: error: too few arguments to function ‘cfg80211_send_rx_assoc’
include/net/cfg80211.h:2802:6: note: declared here
net/mac80211/mlme.c: In function ‘ieee80211_mgd_deauth’:
net/mac80211/mlme.c:2560:19: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2561:30: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2581:18: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2600:4: error: implicit declaration of function ‘__cfg80211_auth_canceled’ [-Werror=implicit-function-declaration]
net/mac80211/mlme.c:2610:16: error: ‘struct cfg80211_deauth_request’ has no member named ‘local_state_change’
cc1: some warnings being treated as errors
make[2]: *** [net/mac80211/mlme.o] Error 1
make[1]: *** [net/mac80211] Error 2
make: *** [net] Error 2
franna81 said:
Hi Everyone
I am fairly new to android customisation, rooting, etc. and have been playing around with creating a custom CyanogenMod kernel to support a TP-Link USB wifi dongle.
The primary reference article for this can be found here - http://forum.xda-developers.com/showthread.php?t=2338179. However I have made some changes as listed below.
Keen to hack this further and any advice or guidance will be greatly appreciated.
Technical Spec:
Ubuntu 12.04 (32 Bit)
Samsung S3 (Cyanogenmod ROM)
Kernel = https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
.config = https://github.com/CyanogenMod/andr.../arch/arm/configs/cyanogenmod_i9300_defconfig
Note - There is no /proc/config.gz on my device, hence the above use of the config.
gcc-arm-linux-gnueabi libstdc++6 libncurses5 libncurses5-dev - exports correctly setup.
Objective
Getting an TP-Link TL-WN821N USB Wifi Dongle to work.
The relevant drivers are already available in mac80211 - http://www.aircrack-ng.org/doku.php?id=mac80211
Error Message
CC net/mac80211/agg-rx.o
CC net/mac80211/ibss.o
CC net/mac80211/mlme.o
net/mac80211/mlme.c: In function ‘ieee80211_mgd_auth’:
net/mac80211/mlme.c:2317:9: error: ‘struct cfg80211_auth_request’ has no member named ‘local_state_change’
net/mac80211/mlme.c: In function ‘ieee80211_assoc_done’:
net/mac80211/mlme.c:2419:2: warning: passing argument 2 of ‘cfg80211_send_rx_assoc’ from incompatible pointer type [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘struct cfg80211_bss *’ but argument is of type ‘unsigned char *’
net/mac80211/mlme.c:2419:2: warning: passing argument 3 of ‘cfg80211_send_rx_assoc’ makes pointer from integer without a cast [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘const u8 *’ but argument is of type ‘unsigned int’
net/mac80211/mlme.c:2419:2: error: too few arguments to function ‘cfg80211_send_rx_assoc’
include/net/cfg80211.h:2802:6: note: declared here
net/mac80211/mlme.c: In function ‘ieee80211_mgd_deauth’:
net/mac80211/mlme.c:2560:19: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2561:30: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2581:18: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2600:4: error: implicit declaration of function ‘__cfg80211_auth_canceled’ [-Werror=implicit-function-declaration]
net/mac80211/mlme.c:2610:16: error: ‘struct cfg80211_deauth_request’ has no member named ‘local_state_change’
cc1: some warnings being treated as errors
make[2]: *** [net/mac80211/mlme.o] Error 1
make[1]: *** [net/mac80211] Error 2
make: *** [net] Error 2
Click to expand...
Click to collapse
Exactly the same issue here, bump :/
When I had to build a mac80211 driver (rt2800usb), I had to apply the following changes on top of cm-10.2.0 (d6f2f4ae4e593067dc59e2ac63f022434199f673):
Code:
# Depends on 3.4 backport that breaks mac80211.
git revert d6f2f4ae4e593067dc59e2ac63f022434199f673 # "Add support for Note 8 (N5100 and N5110)"
git revert c421809918b7106b40a81134f9fb5103146fc715 # "update bcmdhd driver from GT-9505 Source"
git revert 44655588a0b361afa15761b5c58f5a558c1c181c # "WIFI: Use kernel version 3.4 ifdef's."
git revert 3cedbff33e9884fdf3f7aaaa83ab9774d8145d1f # "wireless backport from 3.4"
# Another build fix:
Date: Sun Nov 24 12:04:33 2013 +0100
lib: fix compile of lib/genalloc.c
Taken from commit 3cedbff ("wireless backport from 3.4").
lib/genalloc.c | 54 ++++++++++++++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 22 deletions(-)
After that I was able to build rt2x00 from 3.4.70 (after enabling MAC80211 in config).. Note: these patches do not seem to revert cleanly on cm-11.0
For cm-11.0 (HEAD was 22cbf2cfb211cef2e493c5984d237d0509bf98ce, "otg: when removing ED from readyQ also set flag"), I now do:
Code:
# v--- 2014-11-06 (CM 11.0)
- revert c421809 # update bcmdhd driver from GT-9505 Source
Conflict in drivers/net/wireless/bcmdhd/Makefile, remove -DPASS_IPV4_SUSPEND
and DEBUGFS_CFG80211 (unused), all that remains is:
DHDCFLAGS += -DBLOCK_IPV6_PACKET
Conflict in drivers/net/wireless/bcmdhd/dhd_sec_feature.h, remove:
CONFIG_MACH_KONA
.config:
BCMDHD=M (was =Y, but this allows debugging)
DHD_USE_STATIC_BUF=N
DHD_USE_SCHED_SCAN=N
- revert 4465558 # WIFI: Use kernel version 3.4 ifdef's.
- revert 3cedbff # wireless backport from 3.4
- git checkout 3cedbff -- include/linux/{export,module}.h lib/genalloc.c
git commit -m 'Build fixes from 3cedbff'
Compile fixes, also used by d90b43b "mali: add r3p1 for devices that need it"
This compiles (with CONFIG_MAC80211=M), I have yet to try the newer rt2x00 for my purposes.
Hello, I tried to build ubuntu touch for Galaxy TAB3 10.5 (santos10wifi : gt-p5210)
I need help about an error message because I don't understand where is the error.
Code:
Install: /home/jimy/Desktop/phablet/out/host/linux-x86/lib/libz-host.so
Import includes file: /home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/import_includes
target C++: InputDispatcher_test <= frameworks/base/services/input/tests/InputDispatcher_test.cpp
In file included from /usr/include/bits/posix1_lim.h:160:0,
from /usr/include/../include/limits.h:143,
from external/stlport/stlport/limits.h:30,
from frameworks/base/services/input/tests/../InputDispatcher.h:34,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:17:
/usr/include/bits/local_lim.h:64:0: warning: "PTHREAD_KEYS_MAX" redefined [enabled by default]
In file included from bionic/libc/include/limits.h:86:0,
from /usr/include/../include/limits.h:123,
from external/stlport/stlport/limits.h:30,
from frameworks/base/services/input/tests/../InputDispatcher.h:34,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:17:
bionic/libc/include/sys/limits.h:181:0: note: this is the location of the previous definition
In file included from /usr/include/../include/wchar.h:884:0,
from external/stlport/stlport/stl/_cwchar.h:68,
from external/stlport/stlport/stl/_limits.h:36,
from external/stlport/stlport/limits:29,
from external/gtest/include/gtest/gtest.h:54,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:19:
/usr/include/bits/wchar2.h:448:3: error: #error "Assumed value of MB_LEN_MAX wrong"
In file included from external/stlport/stlport/stl/_cwchar.h:68:0,
from external/stlport/stlport/stl/_limits.h:36,
from external/stlport/stlport/limits:29,
from external/gtest/include/gtest/gtest.h:54,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:19:
/usr/include/../include/wchar.h: In function 'int wctob(wint_t)':
/usr/include/../include/wchar.h:395:50: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
build/core/binary.mk:432: recipe for target '/home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/InputDispatcher_test.o' failed
make: *** [/home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/InputDispatcher_test.o] Error 1
Could someone help me ?