Battery died today, and when I powered on it says:
Firmware Update 0%.
Haven't sen this screen before.
Can't reboot, reset or anything and progress stays on 0%.
Any idea?
Edwin
beerente said:
Battery died today, and when I powered on it says:
Firmware Update 0%.
Haven't sen this screen before.
Can't reboot, reset or anything and progress stays on 0%.
Any idea?
Edwin
Click to expand...
Click to collapse
Looks like it went into download mode. Hold the button on the back of the device down until it reboots. If it comes back after reboot, you need to go into fastboot and use the LG G Watch Restore Tools package found on the G Watch subforum (sorry, I don't have a direct link).
To get into fastboot, reboot the watch using the above instructions, when you see the LG logo start swiping from top-left to bottom-right of the screen until fastboot shows.
Back again
Thanks for you reaponse, but in the meantime its working again.
I tried the reset button, but without any succes. In the end, I let the battery die again, and then put is back on the charger device.
It booted into Android Wear again.
Luckyly ..
Bye
beerente said:
Thanks for you reaponse, but in the meantime its working again.
I tried the reset button, but without any succes. In the end, I let the battery die again, and then put is back on the charger device.
It booted into Android Wear again.
Luckyly ..
Bye
Click to expand...
Click to collapse
Congratulations on getting it fixed. Sounds like it just went into Download Mode on you Glad to hear you didn't need to do anything strenuous to get it running again.
ShadowEO said:
Looks like it went into download mode. Hold the button on the back of the device down until it reboots. If it comes back after reboot, you need to go into fastboot and use the LG G Watch Restore Tools package found on the G Watch subforum (sorry, I don't have a direct link).
To get into fastboot, reboot the watch using the above instructions, when you see the LG logo start swiping from top-left to bottom-right of the screen until fastboot shows.
Click to expand...
Click to collapse
This solution worked quickly and perfectly for me! Even after 11 months of ownership, I didn't even realize there was a "button" on the back!!! Thanks for the tip and the education!
beerente said:
Thanks for you reaponse, but in the meantime its working again.
I tried the reset button, but without any succes. In the end, I let the battery die again, and then put is back on the charger device.
It booted into Android Wear again.
Luckyly ..
Bye
Click to expand...
Click to collapse
Yea you had luck and got stuck in the verify but I've seen it compleatly bricked and there is no way fixing that other than sending it in.
How To Restore The LG G Watch Firmware
ShadowEO said:
Looks like it went into download mode. Hold the button on the back of the device down until it reboots. If it comes back after reboot, you need to go into fastboot and use the LG G Watch Restore Tools package found on the G Watch subforum (sorry, I don't have a direct link).
To get into fastboot, reboot the watch using the above instructions, when you see the LG logo start swiping from top-left to bottom-right of the screen until fastboot shows.
Click to expand...
Click to collapse
Hello, I had the same problem & used the reset and it came on but I didnt have any clue about fastboot, so the next day the G Watch was totally off. Now it only show the battery icon when plugged to power & the firmware update icon when connected to my PC. Please how do I restore the firmware and with what tools? Thank you.
The Politan said:
Hello, I had the same problem & used the reset and it came on but I didnt have any clue about fastboot, so the next day the G Watch was totally off. Now it only show the battery icon when plugged to power & the firmware update icon when connected to my PC. Please how do I restore the firmware and with what tools? Thank you.
Click to expand...
Click to collapse
I hadn't known these came with LG's firmware download partition... Do you get the LG logo with the Bootloader lock/unlock symbol?
Whew!
Just had this happen to me, but the manual reboot/bootloader/start procedure got it back. (Idiot me, instead of rebooting it, powered it off and then left it off for several hours...)
And I know this is way off topic, but what's with the second pin from the top on the back? Mine seems to be slowly corroding...
Related
I got a LG Doubleplay from a friend and he tryed to flash a rom on it and it went bad, so i try to put it in download to restore the phone but it won't stay in download mode.
When i try to set it to download mode it starts but then after maybe 3 to 5 seconds the progress bar freezes and then the phone restarts.
All the phone does is stay at the lg logo
thanks
i am having the same problem what happen to my lg doubleplay was i rooted it then downloaded a app manager rom i was playing around with the app came across the bootloader i think it was i pressed the icon then another icon popped up i ACCIDENTALLY press boot before i got the chance to read the description on what it did
my phone from there just stay stuck on lg screen doesnt boot doesnt do anything i try to hard reset it and im getting the same as you crashes and goes back to lg screen logo i been looking around cant find a solution yet! someone got any ideas? i would appreciate it like alot alot alot!!
mafurasta said:
i am having the same problem what happen to my lg doubleplay was i rooted it then downloaded a app manager rom i was playing around with the app came across the bootloader i think it was i pressed the icon then another icon popped up i ACCIDENTALLY press boot before i got the chance to read the description on what it did
my phone from there just stay stuck on lg screen doesnt boot doesnt do anything i try to hard reset it and im getting the same as you crashes and goes back to lg screen logo i been looking around cant find a solution yet! someone got any ideas? i would appreciate it like alot alot alot!!
Click to expand...
Click to collapse
Have you tried with the LG Mobile Support Tool? I also have a Double Play and I dissapointed that there's no way to restore the phone with it's original settings, i now have a very nice semi-bricked phone, i can only use the apps on the lower screen. Can somebody help us? Please tell me how to put the phone on Download Mode! Please please
plz help
tylrgamster14 said:
I got a LG Doubleplay from a friend and he tryed to flash a rom on it and it went bad, so i try to put it in download to restore the phone but it won't stay in download mode.
When i try to set it to download mode it starts but then after maybe 3 to 5 seconds the progress bar freezes and then the phone restarts.
All the phone does is stay at the lg logo
thanks
Click to expand...
Click to collapse
howd you go to download mode and recovery
hi.
i used this to make restore
A master reset (factory reset) restores the original factory settings and erases all user data (including settings and downloaded content) stored in the phone's internal memory. It does not erase data stored on the SIM card or memory card (if available).
Note: If the handset is locked, frozen, or unresponsive, you can perform a master reset using the hardware keys instead of the menu.
To perform a master reset using hardware keys, follow these steps:
Back up all necessary data. See: Preparing for a master reset on Android.
Turn off the phone.
Note: If the phone is unresponsive and does not turn off, remove the battery and then re-insert it.
Simultaneously press and hold the Qwerty F and Qwerty A keys.
While continuing to hold the Qwerty F and Qwerty A keys, add the Volume Down key.
While holding the Qwerty F, Qwerty A and Volume Down key, press the Power/Lock key.
After you see the LG logo wait at least 10 seconds, then release all of the keys.
The Android Unpacking screen will appear, indicating the master reset is in progress.
The phone will automatically restart and complete the factory reset.
Let me prefice this by saying that my son doesn't know how to flash files, know what super user is, or know how to do much on his phone at all other than watch youtube and text.
He is running either official CM7-RC2 or RC3 for his P500, installing Link2SD and linking a few games is the only tweak I did.
He says it just started boot looping in the morning after charging all night.
My son was complaining his P500 was not starting, I figured it was a very low battery which ended up in a boot loop pattern. The next morning he said he charged it all night and it still wasn't working. Now I knew something was not right.
I pulled the battery, tried to offline charge it, gets stuck at lg logo. Tried to boot with no battery, just the usb plugged in, same bootloop.
Tried to boot into CWM by holding vol up/home and this screen somes up!
Now every time I turn on the phone I'm greeted with this Blue Error Handler message.
Code:
[Blue Error Handler V1.2] Arm 9 Crash!!
[Press Volume up key] To get Ramdump!!
[Press Volume down key] Reboot&savelog!!
:Excep
MODEM Excep :PROXY_00
...
...
<CallStack>
<Additional Info about this crash>
Build ID: P500-M76XX-V20i-DEC-06-2011-XX
Time of crash (m-d-y h:m:s): 06-15-2012
Uptime (h:m:s): 0:00:04
Error in file hsu_mdm_apis.c, line 557
REX_TCB ptr: 0x01ea5640
tcb.task_name: PROXY_00
I can get into emergency mode but lsusb shows nothing, adb sees nothing, kdz says phone not found. I've tried shaking the phone like a fool over and over.
The computer and usb cable work fine on my two other P500s.
I'm kind of out of ideas.
This should help
I bricked mine yesterday...KDZ did not work for me either...
the second post in the link below solved mine...
http://forum.xda-developers.com/showthread.php?t=1710559
You also might need the p500 drivers installed to use the lg thunder 1.5
You can download it from here
https://dl.dropbox.com/u/46581752/LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
LGMDP doesn't connect to the phone, it waits at the select port screen. The drivers are installed since LGMDP can see my other P500s.
*edit* I was just thinking, I haven't tried connecting my other phones in emergency mode. Perhaps it is the drivers.
You boot to CMW with home+VOLDOWN+power... you mentioned volup.
Sent from my LG-P500 using Tapatalk 2
Try this
mrplowdan said:
LGMDP doesn't connect to the phone, it waits at the select port screen. The drivers are installed since LGMDP can see my other P500s.
*edit* I was just thinking, I haven't tried connecting my other phones in emergency mode. Perhaps it is the drivers.
Click to expand...
Click to collapse
It did not detect mine either at first place... follow this.
1) close the LGMPD
2) plug the usb into a different port you are already doing
3) put the phone into emergency
4) connect
5) then start LGMPD
hope this helps
you could try flashing a new kernal/rom through the computer?
try to put phone in recovery with volume down button
ankitwashere said:
...the second post in the link below solved mine...
http://forum.xda-developers.com/showthread.php?t=1710559
Click to expand...
Click to collapse
basically ends up with my trying to use lgmpd and seeing no phone at the select port screen
ankitwashere said:
You also might need the p500 drivers installed to use the lg thunder 1.5
You can download it from here
https://dl.dropbox.com/u/46581752/LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
Click to expand...
Click to collapse
thanks, same version I already had installed though
ankitwashere said:
It did not detect mine either at first place... follow this.
1) close the LGMPD
2) plug the usb into a different port you are already doing
3) put the phone into emergency
4) connect
5) then start LGMPD
hope this helps
Click to expand...
Click to collapse
thanks, tried all 8 ports still no detection, changed my bios settings to use usb 1.0 only, didn't help, tried usb 2.0 highspeed didn't help, tried usb 2.0 full speed, didn't help
-DarkKnight- said:
you could try flashing a new kernal/rom through the computer?
try to put phone in recovery with volume down button
Click to expand...
Click to collapse
I wish I could get recovery going, but it always just hangs and the first lg logo if I hold any buttons down during boot. The only way I can get emerg mode going is to wait for the Blue Error Handler message to come up then hold vol down and back.
Once my phone got bricked and yes nothing detected my phone in emergency mode...so I just kept my phone turned off and plugged in and started doing what the thread said...then it automatically detected my phone and my phone's problem was solved
Please do it at ur own risk...I wont hold any responsibilty.
Sent from my LG-P500 using XDA
mrplowdan said:
Let me prefice this by saying that my son doesn't know how to flash files, know what super user is, or know how to do much on his phone at all other than watch youtube and text.
He is running either official CM7-RC2 or RC3 for his P500, installing Link2SD and linking a few games is the only tweak I did.
He says it just started boot looping in the morning after charging all night.
My son was complaining his P500 was not starting, I figured it was a very low battery which ended up in a boot loop pattern. The next morning he said he charged it all night and it still wasn't working. Now I knew something was not right.
I pulled the battery, tried to offline charge it, gets stuck at lg logo. Tried to boot with no battery, just the usb plugged in, same bootloop.
Tried to boot into CWM by holding vol up/home and this screen somes up!
Now every time I turn on the phone I'm greeted with this Blue Error Handler message.
Code:
[Blue Error Handler V1.2] Arm 9 Crash!!
[Press Volume up key] To get Ramdump!!
[Press Volume down key] Reboot&savelog!!
:Excep
MODEM Excep :PROXY_00
...
...
<CallStack>
<Additional Info about this crash>
Build ID: P500-M76XX-V20i-DEC-06-2011-XX
Time of crash (m-d-y h:m:s): 06-15-2012
Uptime (h:m:s): 0:00:04
Error in file hsu_mdm_apis.c, line 557
REX_TCB ptr: 0x01ea5640
tcb.task_name: PROXY_00
I can get into emergency mode but lsusb shows nothing, adb sees nothing, kdz says phone not found. I've tried shaking the phone like a fool over and over.
The computer and usb cable work fine on my two other P500s.
I'm kind of out of ideas.
Click to expand...
Click to collapse
Mind if I ask how long have ur son been using this phone? To me, it looks like it is due to age. Well that is how I see it.
a cheap trick
This is what i tried on some other phone with similar situation...
use KDZ updater....to update v20g
put to emergency...
start the update (even if the phone is detected or not)
it may or may not install the rom correctly ......but after that LGMDP will start detecting your phone..
allenwalker1998 said:
Mind if I ask how long have ur son been using this phone? To me, it looks like it is due to age. Well that is how I see it.
Click to expand...
Click to collapse
It was a Christmas gift but its been used quite a bit.
ankitwashere said:
This is what i tried on some other phone with similar situation...
use KDZ updater....to update v20g
put to emergency...
start the update (even if the phone is detected or not)
it may or may not install the rom correctly ......but after that LGMDP will start detecting your phone..
Click to expand...
Click to collapse
ya I've tried updating using KDZ updater many times it always hangs at the point where it says phone not found.
I use Ubuntu on my machine and its a pain to have to reboot to windows to try to flash it, are there any linux alternatives to LGMPD or KDZ? Maybe I'll try the official LG updater full program thing next time I reboot.
I just bought an atrix 4g for myself so I'm busy playing with my new toy
I just got the error it looks like you overclock too high of a frequency u got that instead of the kernel panic. I think it is because that our processor can't handle the oc and crashed.
But somehow I got out of it and no bootloop. Will investigate.
allenwalker1998 said:
I just got the error it looks like you overclock too high of a frequency u got that instead of the kernel panic. I think it is because that our processor can't handle the oc and crashed.
Click to expand...
Click to collapse
He's never overclocked it on purpose, I just asked him, he doesn't know what overclock means.
Thanks for the input though
mrplowdan said:
He's never overclocked it on purpose, I just asked him, he doesn't know what overclock means.
Thanks for the input though
Click to expand...
Click to collapse
Have u tried using kdz and update ur son's phone back to stock?
allenwalker1998 said:
Have u tried using kdz and update ur son's phone back to stock?
Click to expand...
Click to collapse
Should try. I think it is a corrupt rom or something.
Went to researched and found out that the error happens wipe the /system isn't wiped properly. Try kdz first then install a custom recovery and wipe /system using amora recovery instead of cwm.
not to sound rude but have you read this thread? I've tried kdz multiple times in many different ways. Do you have any kdz tips I haven't tried?
mrplowdan said:
not to sound rude but have you read this thread? I've tried kdz multiple times in many different ways. Do you have any kdz tips I haven't tried?
Click to expand...
Click to collapse
Yeah I have. Uninstall usb drivers. Reinstall them turn off LG USB modem. Connect it to ur com. Shake the phone like crazy and hope it connects once connected just update.
allenwalker1998 said:
Yeah I have. Uninstall usb drivers. Reinstall them turn off LG USB modem. Connect it to ur com. Shake the phone like crazy and hope it connects once connected just update.
Click to expand...
Click to collapse
Uninstalled-reinstalled, rebooted, lg virtual modem doesn't appear on the list until you get the phone to connect at least once, I shook shook shook, while in emerg mode, it never seems to connect, I tried lgmdp and kdz, both never connect. Tried with and without the battery in, never connected.
Hi,
I HAVE GOT A VERY BIG PROBLEM.After i installed the App AutoRec(i had TWRP befoe,but i thougt when i install it it updates TWRP to a newer version) my phone only starts in Fastboot Mode-no DownloadMode-no Recovery Mode.
After that i erased all the things(aboot,boot,cache,system,laf,....) und flashed them again,after that the Phone only starts until the LgLogo then it stops.No Fastboot,no recovery,no DownloadMode.When I Press VolumeUp+PowerOff i get into the Factory Reset.When i press on Erase all user data&restore default settings?---When i press Yes the phone the logo comes an on the left up side stands"Error:boot ceryfication verify
Secure Boot error
Cause :Boot cerification verify
After that the display is black,and i have to restart the Phone.
When i press all 3 buttons on my phone,i got into the hardware key control mode,does me help that everthing?
When i plug in the phone in my pc,it says "unknown device",when i use to do something with fastboot it says"waiting for device"?
Please help me,what can i do?I have the Phone only since 2 two days,an i wouldnt lost it Unhappy
Sorry for my bad english
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Ilikecheese said:
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Click to expand...
Click to collapse
You obviously didnt read his post correctly. He stated that when he gets to the factory reset area which leads you to Recovery Mode/TWRP it shows the LG logo appears and nothing happens.
As for you my friend if you are able to somehow get into download mode with a button combination you have a chance at saving yourself by using a TOT or KDZ file to restore your phone to stock software. But i also have a question for you.........Why the hell would you allow an app to flash a recovery file that has nothing to do with BUMP'D? The Bump'd recovery for our phones is specific to our phones! You should never auto update any recovery unless stated its ok from the Bump'd developers, Which they never did or will because our TWRP Recoveries are different than any other phones because of the bump'd implementations with in them and the boot.img's. Sounds to me like you may have screwed up your partitions and/or boot stack. Your are better going on IRC and requesting the help of TheCubed/IOMonster and AutoPrime, but mark my words you will face some heavy criticism from members of the IRC channel when you explain this story to them. But they are always willing to help.
I dont know why i have done it,im new on Lg.Before i had an HTC there is so many other.I will aks that guys.I hope i can save my new phone.
But the Problem is,i dont get into download Menu,i did everthing
same thing
I am i the same problem. I am stuck and can only get to the hardware menu.
vaughnr said:
I am i the same problem. I am stuck and can only get to the hardware menu.
Click to expand...
Click to collapse
Same problem too.
1. no download mode, no fastboot no recovery.
2. In windows, g2 is detected as LGE Androidnet and modem when is on lg screen. Green and blue led flash.
3. Stuck on lg screen
When I try to enter download mode it stay stucked on download image, no firmware upgrade.
Thanks
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
malhovic said:
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
Click to expand...
Click to collapse
Not sure it will work.
I have G2. Tryed the G2 metod but nothing.
Thanks guys,
I managed to get back my phone. I had to put it on qualcomm 9008 and after that to flash again all files.
Best regards.
I am pretty new to this rooted community and i unfortunately felt a too confident with everyone saying it is really easy. I did a one click root on my lg g3 vs985 (35B version) and was successful. The next step was to install twrp and i attempted so with flashify and the latest twrp IMG. The recovery boot never worked and always did a normal boot. I resorted to this one tutorial which said to use an app called autorec. This where it went wrong. The reboot made my screen blank and none of the buttons did anything. I plugged it in and my laptop still recognized the phone. I pulled the battery and plugged in and the screen turned on (thankfully) and shows a missing battery screen. With the battery in i tried turning it on with the power and volume down button on and it vibrated. Now randomly vibrates. Please help i don't know what to do!
This forum is extremely unhelpful, but i managed to get it back to stock. I was missing some drivers and not being careful, i almost ended up with a brick.
What did you do to fix the issue? My phone is doing nearly the same thing though it was after installing JasmineROM that it occurred. The screen is blank unless I pull the battery and plug it in to see the missing battery icon.
malhovic said:
What did you do to fix the issue? My phone is doing nearly the same thing though it was after installing JasmineROM that it occurred. The screen is blank unless I pull the battery and plug it in to see the missing battery icon.
Click to expand...
Click to collapse
1. Pull the battery and put it back in
2. Press and hold the volume up button and plug it in to a PC
3. Keep holding down the volume up until you see a screen which says download mode
4. Install a program called LG Flash Tool 2014 (Extract and put it into a directory you want)
5. Download the KDZ of the stock software you want (forum around here but I don't remember where)
6. Put the KDZ file into the LG Flash Tool folder
7. Enter CDMA and the KDZ file
8. Click normal flash which will bring you to a screen.
9. There will be menu with alot of blank things, don't worry just click start
10. It will being you to a LG mobile support screen.
11. Wait till the meter completes
12. If it there's an error at the end saying connection failed do not worry the bar on your phone should begin moving
13. Your phone will then boot into stock and you can do what you want from there.
2 hours later Ive given up, google dosent have the answer, neither does clueless LG support. On my previous phone, note 4, a simple battery pull would have done the trick.
But anyway, it's stuck on the LG logo screen, have power key/ volume down rebooted multiple times, no luck. Someone at LG support said hold the power button down for about 30 seconds and it should power off? Is that right? It didnt work out for me, held it down for over a minute, did that several times. At this point I just need to be able to power the device off so I can boot into stock recovery, but am unable to.
Btw I apparently messed it up by disabling "bloat" through adb fastboot command prompt, I was only maybe 5 apps/ programs in when the phone froze, that's what ultimately brought me here.
Don't have a V30 yet, but the ol' Quark was kind of fidgety, maybe its method will work.
Hold Power+Vol Down until it reboots. Let go of Power, but keep Vol Down held. Hopefully, the boot menu or recovery will come up after some seconds. Should be able to completely power off from there or factory reset.
T-Mobile also describes a specific thing you can try involving some button timing, but I've read that it's not supported on all variants.
Septfox said:
Don't have a V30 yet, but the ol' Quark was kind of fidgety, maybe its method will work.
Hold Power+Vol Down until it reboots. Let go of Power, but keep Vol Down held. Hopefully, the boot menu or recovery will come up after some seconds. Should be able to completely power off from there or factory reset.
T-Mobile also describes a specific thing you can try involving some button timing, but I've read that it's not supported on all variants.
Click to expand...
Click to collapse
Thanks for your reply, I tried that 3 times, no luck though. LG has got to have a way of force powering these things off you would think. In the meantime I'm concerned about screen burn in with that bright white LG logo glowing on screen for hours.
Septfox said:
Don't have a V30 yet, but the ol' Quark was kind of fidgety, maybe its method will work.
Hold Power+Vol Down until it reboots. Let go of Power, but keep Vol Down held. Hopefully, the boot menu or recovery will come up after some seconds. Should be able to completely power off from there or factory reset.
T-Mobile also describes a specific thing you can try involving some button timing, but I've read that it's not supported on all variants.
Click to expand...
Click to collapse
Ok here's the proper timing on that
https://www.youtube.com/watch?v=fiod8cvbS9s
That worked, but unfotunately after the phone sat with that lg logo on screen for idk maybe 4 hours.
Gross. God forbid they just put in a proper boot menu like most other manufacturers.
On the bright side, if it's suffered any burn-in it should be visible on that bright white factory reset screen.
Septfox said:
Gross. God forbid they just put in a proper boot menu like most other manufacturers.
On the bright side, if it's suffered any burn-in it should be visible on that bright white factory reset screen.
Click to expand...
Click to collapse
Fortunately, no, everything is back up and running and looks good. I was certainly worried about i though. But im glad now I know how to do it now, especially since I'll be rooting this device as soon as it hits LG's bootloader unlock list
@breacherman Did you get it to power off from stock recovery? I'm in the same situation. I can get in to stock recovery and even download mode. But I can't get it to boot or power off.
Update: fixed it.
welp looks like I have this same issue on my US998.
I think I may have borked it. The device is stuck on the LG V30 boot screen and I can no longer force reset into TWRP. I also cant get the device to completely power down to get into fastboot mode to try and use the USB cable trick
I cant use uppercut, as the device wont connect to my pc since its stuck on the boot screen. Talk about frustrating. This all happened when I mistakenly installed the OREO TWRP on a nougat based US998. For your own good DONT repeat my mistake.
Amd4life said:
This all happened when I mistakenly installed the OREO TWRP on a nougat based US998. For your own good DONT repeat my mistake.
Click to expand...
Click to collapse
That's not the cause of your problems. I have the Oreo-compatible TWRP installed on Nougat US998. It's fine. It's also compatible with Nougat.
It's just a newer, better version of TWRP -- 3.2.1. There's no reason not to install it. You just install it within TWRP, using install "Image" to "recovery".
ChazzMatt said:
That's not the cause of your problems. I have the Oreo-compatible TWRP installed on Nougat US998. It's fine. It's also compatible with Nougat.
It's just a newer, better version of TWRP -- 3.2.1. There's no reason not to install it. You just install it within TWRP, using install "Image" to "recovery".
Click to expand...
Click to collapse
OK, welp do you happen to have any idea on how to manually power down the device, versus just waiting for the battery to drain to zero.
Days like this I SURE miss my removable battery
Amd4life said:
OK, welp do you happen to have any idea on how to manually power down the device, versus just waiting for the battery to drain to zero.
Days like this I SURE miss my removable battery
Click to expand...
Click to collapse
Just curious how did you install the newer TWRP? Within TWRP itself or flashing via ADB?
Sent via open market LG US998 V30/V30+
---------- Post added at 11:07 PM ---------- Previous post was at 11:04 PM ----------
Amd4life said:
OK, welp do you happen to have any idea on how to manually power down the device, versus just waiting for the battery to drain to zero.
Days like this I SURE miss my removable battery
Click to expand...
Click to collapse
https://thedroidguy.com/2018/01/fix...reen-showing-blank-display-easy-steps-1079816
See the part about Master Reset.
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Just curious how did you install the newer TWRP? Within TWRP itself or flashing via ADB?
Sent via open market LG US998 V30/V30+
---------- Post added at 11:07 PM ---------- Previous post was at 11:04 PM ----------
https://thedroidguy.com/2018/01/fix...reen-showing-blank-display-easy-steps-1079816
See the part about Master Reset.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
yeah pretty dumb move on my part. I installed a oreo rom, on my US998. Which up till today was all fine and dandy to run OREO roms on the nougat firmware. I decided to try the latest boombox rom, based off 20D. It booted my device into a dual sim version, killing my data connection, while showing that I had two sim slots for some reason. I thought, hmm maybe I need to upgrade TWRP. So I flashed the latest TWRP image IN TWRP (probably the killer switch) and everything seemed ok.
I rebooted TWRP and then wiped, and reinstalled the rom, and it booted up fine, yet still showed my US998 as a dual sim device.
So I figured, hey I am still on the nougat firmware, Ill just go back to stock. So I kdz back to stock (latest version), and then try to install the original TWRP through fastboot, bootloop city.
I am draining the battery, to try and power the device down, and then I will retry the USB cable to fastboot and try to kdz back to stock again.
I should have known better after all the LG devices I have owned, but sometimes you take a loss, messing around with LG lol.
Wish me luck on the battery drain, forced fastboot method.
Amd4life said:
yeah pretty dumb move on my part.
Click to expand...
Click to collapse
Did you ever get this fixed? I am stuck on the LG V30 screen as well. I can get into factory reset but nothing else. The last command I used was via adb to boot into twrp when I left twrp and tried to reboot it only showed the bootloader warning screen and now I am stuck on the splash screen.
stolikat said:
Did you ever get this fixed? I am stuck on the LG V30 screen as well. I can get into factory reset but nothing else. The last command I used was via adb to boot into twrp when I left twrp and tried to reboot it only showed the bootloader warning screen and now I am stuck on the splash screen.
Click to expand...
Click to collapse
https://thedroidguy.com/2018/07/fix...reen-showing-blank-display-easy-steps-1079816
Press and hold the Power button (or fingerprint scanner) and Volume Down button simultaneously for 8 seconds. Your phone will then vibrate, shut down, and reboot.
This method usually fixes minor software issues transpiring in mobile devices without affecting any data stored on your phone’s internal memory. Basically, it works the same as a soft reset only that you forced the device to reboot through the hardware key combos.
Second method: Connect your LG V30 to a charger and let it charge.
When your phone does nothing and shows nothing but a black display, chances are you would immediately think that it’s damaged. But the truth is, your phone might just have ran out of power completely and therefore no longer able to power up. With that said, try to connect your phone to its charger then allow it to charge for at least 20 to 30 minutes. It can take longer for the charging indicator to show up especially if the battery was totally drained before charging. Also make sure that your phone is able to charge properly. You can try using a different charger for your LG V30 or use other power sources available to ensure that the problem you’re dealing with is not associated with a faulty charger or power outlet.
Third method: Try performing a master reset using the hardware keys.
If your phone is able to charge, try to perform a master reset with the hardware keys. A master reset will restore the original factory settings and wipes out your personal data stored on the internal memory of your phone. All your downloads, ringtones, images, apps, contacts, and Visual Voicemail will be erased in the process. Considering that the problem is triggered by a software bug affecting your LG V30’s system functions, a full system reset will be able to eliminate the bug as well. Here’s how it’s done:
Back up all your data on the internal memory (if possible).
With your device powered off, press and hold the Power button and Volume Down buttons simultaneously for a few seconds.
When the LG logo appears, quickly release and then re-hold the Power button while keep holding the Volume Down button.
Let go of the buttons when the onscreen menu appears.
When you see the option to Delete all user data (including LG and carrier apps) and reset all settings message prompt, press the Volume Down button to highlight Yes.
Then press the Power button to reset the device.
Wait until the reset is complete then reboot your device. If it’s able to boot up successfully, proceed with the initial setup.
Fourth method: Plug your LG V30 in to a computer
LG Bridge is the new PC suite software for LG Android smartphones like LG V30. It works the same way as iTunes does on an iPhone and iPad, when accessing and managing iOS device system.
LG Bridge is mainly used to backup and restore LG phone data, sync data, update software and other related tasks. In order to use this app, you’ll need to download the LG Bridge installer from LG Support site then install it on your computer (Windows or Mac).
After the LG Bridge software is successfully installed on your computer, try to detect or access the LG V30 phone system through LG Bridge with these steps:
Connect your LG V30 to your computer using the USB cable that comes with your device. Alternatively, you may use the cable attached to your LG charger. Be sure to unlock your LG V30 when you connect it to your computer.
Once connected, select a USB connection type like Media sync (MTP) or File Transfer, if you’re prompted on your device.
Then, open LG Bridge on your computer.
Select LG Backup to create a backup of your data stored on the phone.
If you wish to restore, follow the onscreen instructions on the LG Bridge menu to restore your device. Basically if your able to access your phone on the computer through LG Bridge software, it means that your phone is not dead. More likely, it’s just not charging so you’ll have to deal with charging problem instead.
Click to expand...
Click to collapse
Im having a similar issue. Except everything went fine for me. Successfully converted to US998, upgraded again to oreo, flashed TWRP, flashed the two LG specific files, installed Magisk. Everything went great. Unitl I tried to install Lineage OS 15. Then it went to the Lineage splash screen and stays there. Now I can no longer get into any recovery of any sort even when trying to do the master reset. Just continues to reboot and lands on the Lineage splash screen. I guess Im going to have to let the battery run all the way out and hope that I can get back into fastboot that way.
rodcpierce said:
Im having a similar issue. Except everything went fine for me. Successfully converted to US998, upgraded again to oreo, flashed TWRP, flashed the two LG specific files, installed Magisk. Everything went great. Unitl I tried to install Lineage OS 15. Then it went to the Lineage splash screen and stays there. Now I can no longer get into any recovery of any sort even when trying to do the master reset. Just continues to reboot and lands on the Lineage splash screen. I guess Im going to have to let the battery run all the way out and hope that I can get back into fastboot that way.
Click to expand...
Click to collapse
Lineage takes a long time to boot on install.
Alibaba0101 said:
Lineage takes a long time to boot on install.
Click to expand...
Click to collapse
Its been on the splash screen now for 3 hours. Its not going to boot.
rodcpierce said:
Its been on the splash screen now for 3 hours. Its not going to boot.
Click to expand...
Click to collapse
You tried the usual suspects of holding the power button down
or power button and volume down together?
Alibaba0101 said:
You tried the usual suspects of holding the power button down
or power button and volume down together?
Click to expand...
Click to collapse
Yes. Sure have. I held the power button down for 5 minutes and nothing. It never powers off. The power button plus down works to reboot the device. And I can also get it to go to the factory reset screen, but when I do that it goes through the motions and then just tries to boot again. This is why Im assuming it has removed the recovery some how?
rodcpierce said:
Im having a similar issue. Except everything went fine for me. Successfully converted to US998, upgraded again to oreo, flashed TWRP, flashed the two LG specific files, installed Magisk. Everything went great. Unitl I tried to install Lineage OS 15. Then it went to the Lineage splash screen and stays there. Now I can no longer get into any recovery of any sort even when trying to do the master reset. Just continues to reboot and lands on the Lineage splash screen. I guess Im going to have to let the battery run all the way out and hope that I can get back into fastboot that way.
Click to expand...
Click to collapse
What variant before conversion?