Related
I just want to pose a question:
My volume down button has been broken (peculiar build quality of these things ), but to the best of my current knowledge i'm safe. In CWM recovery i can always loop in the scroll to make the right decisions and to reach "fast boot" i don't need to use the "volume down". My question is then this: Is there any situation that I could happen to stumble upon in which I would need the down button to carry out an "unbricking process"/wipe/reseting? I have never had to use "fast boot" since all my issues jumping between firmwares have been resolved through CWM, and I don't want to just try "fast boot" now just to find I need the "volume down" to be able to restart the device
I don't think that button is needed for a major task, I think you're safe for now!
With the stock recovery you'll need it to use the update, but with cmw as you said it you don't need it, for fastboot/adb you don't need it, for now there's no major task that I can think of that that button is needed.
Enviado através do Tapatalk
Thanks for the swift answer! So if i for example flash FolioMod then I need to flash CWM in order to change to another firmware. How do one flash CWM without using stock recovery? ADB? Guide somewhere?
Heres a post i've found on another forum that explains how to set up fastboot:
Step 1 - Install fastboot driver for the Folio :
- Download PdaNet and install it on your PC, it will go till a point where it says it can't be installed and cancel itself but the magic is that the driver is installed.
Download PdaNet from www[dot]junefabrics[dot]com/android/download.php (i had to put the link that way cause the forum wont allow me to post outside links yet)
Step 2 - Download the tools needed to prepare the Folio
- Download and extract the following archive on your PC, these are the tools needed to erase the Folio and to flash the Honeycomb rom. You will only need what's inside the folder ToolsD...
Download from www[dot]box[dot]net/shared/4ugbev5jnx5fbp3v3u2e
Step 3 - Start fastboot mode on the Folio
- Start the tablet and at the TOSHIBA logo press 3 times Power and 1 time Vol+, then connect it to the PC. It should be detected by the driver we installed at step 1.
Step 4 - Erase the tablet and flash the new recovery (ClockWorkMod)
- Open a cmd window on your PC, go to the folder ToolsD we extracted at step 2 and type in the following commands :
Code:
fastboot erase userdata
fastboot erase system
fastboot erase cache
fastboot erase linux
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot reboot
Step 5 - Install the new rom from ClockWorkMod
- Once the reboot starts, at the TOSHIBA logo, press Power and Vol+ at the same time, then Vol+, then Vol-, then Vol+. You should be in ClockWorkMod recovery...
- Prepare a SD card with your favorite rom (for me it's Folio3x(HoneyComb 3.0.1) for Folio100 - VegaComb based), don't forget to unzip it, you should end with a update.zip file.
- Insert the SD card in the tablet and select - apply sdcard:update.zip, it should start the installation. If not chose - install zip from sdcard and choose the file. If you can't see it, either the sdcard is not formated correctly or it simply does not see the card, try to reboot the recovery with the sdcard inserted.
After these steps and once it's installed, it should reboot and start VEGACOMB. Please be patient, it takes a while to start... and do not forget to reboot after the initial setup to activate the wifi (yes it's a bug)!
If it still does not start, reflash it again (step 5) sometimes it just does not work on first try. What you can also try is to format the different partitions from ClockWorkMod recovery, there's a Mounts and Storage menu and after you mount all the possible partitions (some won't), format them all, reboot the recovery and start step 5 again.
Regards,
Luis
Click to expand...
Click to collapse
If you want to change your recovery, just replace the recovery.img on the ToolsD folder with the one you want, then on step 4 just do the following:
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot reboot
You dont need step 5.
I also think that if you remove the recovery.img from the update.zip before you flash the rom it will keep the recovery you have now, but i cant confirm that, anyway, if you need to change the recovery just do those steps.
HOPING IT MIGHT HELP....!!!!!
IF IT DOES DUN FORGET TO THANK....
Here is an article which will be discussing all about the rooting the device, getting streak mod recovery menu, flashing customized ROMs and lastly How to get wicked customized BOOTANIMATION uploaded on the customized ROMs.
BUT BEFORE I PROCEED ANY FURTHER I MIGHT WARN YOU THAT ALL THE STUFF MENTIONED BELOW WORKED FOR ME AND HENCE FORTH I AM POSTING IT BUT WHEN UR FOLLOWING THE INSTRUCTIONS BE SPECIFIC TO THE POINT AND FOLLOW IT AND YOU ARE DOING IT ON YOUR OWN RISK I AM NO ONE TO BE BLAMED IF YOU MESS IT UP.IF STILL YOU WANNA BLAME ME SURE YOUR ARE WELCOME.
Now this article will be one stop for everything when the word customization comes to your mind
and its the result out of my research on all the information provided on the internet not only on the XDA DEVELOPERS but else where too. Without wasting much time lets proceed.
1. ROOTING YOUR DELL STREAK :
Downloading the file : http://forum.xda-developers.com/show....php?t=1044765
Video For Reference : http://www.youtube.com/watch?v=Hifk15SbHVQ
ROOTING THE DEVICE WILL VOID YOUR WARRANTY
About :
The GingerBreak APK is a wrapper around the newly released GingerBreak exploit (credits to The Android Exploid Crew), which is meant to attain root access on GingerBread. This specific exploit*may*work on various Froyo and Honeycomb versions as well.
What the APK and exploit do is as follows:
- The APK puts the right files in the right place to run the exploit
- The APK runs the exploit
- The exploit attempts to attain root access
- If it succeeds, the exploit remounts /system as read-write and runs the installer script
- The installer script attempts to install the su binary and superuser APK, and reboots
Some important things to know:
- You must have USB debugging enabled on your device
- You need to have an SD card (formatted and) inserted - if it doesn't work, try formatting the SD card in your computer, or switching it with a different (or old, etc) SD card
- The APK must be installed to device, NOT SD card
- The exploit may take a while to run, but not more than 10 minutes, if it does, get me a logcat, and reboot the device. In rare occasions, even if the device does not reboot, you may still have root. So check that out after you manually pull battery after 15 minutes or so of being stuck.
- Always reboot between root attempts!
- While (temporary?) root access may be attained, due to locked bootloaders, efuses, S-ON, and whatnot this may still not work on your device. For temproot purposes, use the raw binary exploit (linked below), not this APK.
- The GingerBreak exploit should not be used to attain temproot and continue using the device. It fscks vold, you do not want to be running like that. You want to reboot! So if the root doesn't stick, you (still) have a problem.
Installation :
- Make sure USB debugging is enabled
- Make sure you have an SD card (formatted and) inserted
- Get the APK on the phone somehow, and install it
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
- Make sure the Superuser app is install and working
- Optional: Install BusyBox from Market (I personally prefer the stericsson installer)
- Optional: Uninstall GingerBreak, you don't need it on your phone anymore
WARNING: Apparently on some devices the root exploit causes the SD card (internal or external) to be formatted. Also, if it gets stuck but you do see the card mounting/unmounting, try formatting your SD card yourself and try again (or use a different SD card) - often this works*.
However there are many other applications to root the phone but the gingerstreak was the one worked for me and i used .you can check on net and will get other applications too eg: SUPERONECLICK,etc.
2. Getting the streakMOD Recovery menu :
DOWNLOAD FILE : http://forum.xda-developers.com/showthread.php?t=840326
Note : in the streamMod recovery menu to navigate up and down use the volume rocker keys and to select use the camera button.
HOW TO INSTALL THE RECOVERY :
Step 1: Unzip and flash with: fastboot -i 0x413c flash recovery recovery.img
Step 2: Reboot with: fastboot -i 0x413c reboot
Step 3: Hold down the keys "volume up" and "volume down" simultaneously while the device is rebooting.
Step 4: Select "Software upgrade via Update.pkg on SD Card" in the menu
Step 5: At the Dell Logo press the power button and you will be presented with the Recovery Menu
Now all the newbie will be having only one question in mind what does the term FLASH here refers to...i was also struck by the same...Honestly, it took me one week to crack that term.
Here s the answer :
FLASHING is nuffin but running a handfull of commands which i will be providing you,you can just copy and paste it but the way you write and run those commands it the real deal.
Link for streakmod revovery resource:
Link: http://forum.xda-developers.com/showthread.php?t=840326
Steps OF Flashing (FOR WINDOWS USERS) :
CONSIDERING YOU HAVE ALREADY ROOTED YOUR DEVICE
STEPS TO BOOT INTO RECOVERY :
LINK : http://www.youtube.com/watch?v=S23rG...re=context-chv
THE ABOVE LINK IS JUST TO ASSIST YOU HOW TO BOOT INTO FASTBOOT MODE HOWEVER IT SHOWS THE WAY OF FLASHING THE STREAKMOD RECOVERY WHICH DIDNT WORK FOR ME.
Step 1: MAKE SURE THE USB DEBUGGING IS ENABLED.
Step 2: TURN OFF THE DEVICE REMOVE THE BATTERY FOR ABOUT 5 SECONDS AND REPLACE IT.
STEP 3: PRESS THE CAMERA AND THE POWER BUTTON AT THE SAME TIME AND KEEP IT PRESSED UNTIL A WHITE SCREEN WILL APPEAR.
STEP 4: IT WILL BE SHOWING “WAIT FOR SD DETECT” THEN AFTER THE MENU COMES UP ON THE SCREEN WAIT FOR LIKE 15 SECONDS APPROX
STEP 5: CONNECT YOUR DEVICE(DELL STREAK) TO THE PC AND THEN PRESS FASTBOOT OPTION ON TOP RIGHT CORNER OF THE SCREEN.
STEP 6: THEN WAIT FOR LIKE ANOTHER 15 SECONDS AND FOLLOW THE PROCEDURE PROVIDED BY ME OR IN THE VIDEO LINK I HAVE POSTED ABOVE...ITS COMPLETELY YOUR CALL.
NOTE : clockworkMOD WORKS ON ANOTHER ANDROID DEVICES BUT streakMOD Recovery works on DELL STREAK
Step 1: You need fastboot/ADB tools http://mirror2.streakdroid.com/manii...stboot+ADB.zip
Step 2: Unzip to a folder; say C:\Fastboot+ADB
Step 3: StreakMod recovery: Download the file recovery-v0.3.2.8-beta.zip (3.57 MB) http://forum.xda-developers.com/showthread.php?t=840326. Unzip and copy ‘recovery.img’ *to fastboot tools directory*(i.e. C:\Fastboot+ADB\Win32\recovery.img)
Step 4: Now Open the command prompt and by using the 'ls' command and 'cd' command navigate to the folder and your command prompt line show b exactly like C:\Fastboot+ADB\Win32\>
Step 5: Now copy and paste the command fastboot -i 0x413c flash recovery recovery.img, and you will find the mobile screen changes and displays something with an exclamation mark at the end....it means the Recovery image that needed to be flashed is done.
Step 6: Now all you need is to enter the next command in the command prompt on your computer screen fastboot -i 0x413c reboot
while the device reboots itself hold the VOLUME UP AND VOLUME DOWN or simple the VOLUME ROCKER keys.
link for using instructions on streakmod :
Link : http://www.rdtk.net/2011/06/25/using...akMod-Recovery
NOW IF YOU HAVE TO HAVE TO FLASH THE BASE BAND (OPTIONAL) :
Note : IT TOTALLY DEPENDS ON THE CUSTOMIZED ROM YOUR ARE FLASHING SOME ROMS eg : DJ steven's GingerStreak 2.4.4 required you to flash both the DSP and the baseband Whereas if you are going to flash the Ten's Longhorn 2.9.1 as its the latest it wouldnt require the flashing.
Incase you have to flash the DSP and baseband
Link : http://forum.xda-developers.com/show....php?t=1333010
Note : Go to the page and download the link of the DSP and AMSS provided on the bottom of the page and then do exactly instructed :
Step 1: You need fastboot/ADB tools http://mirror2.streakdroid.com/manii...stboot+ADB.zip
Step 2: Unzip to a folder; say C:\Fastboot+ADB
Step 3: StreakMod recovery: Download the file recovery-v0.3.2.8-beta.zip (3.57 MB) http://forum.xda-developers.com/showthread.php?t=840326. Unzip and copy ‘recovery.img’ *to fastboot tools directory*(i.e. C:\Fastboot+ADB\Win32\recovery.img)
Step 4: Now Open the command prompt and by using the 'ls' command and 'cd' command navigate to the folder and your command prompt line show be exactly like C:\Fastboot+ADB\Win32\>
Step 5: Enter the command “fastboot -i 0x413c flash amss amss.mbn” copy and paste it without the inverted commas in the command prompt to flash the baseband and phone screen will show a line ending with exclamation.
Step 6: Enter the command “fastboot -i 0x413c flash dsp1 dsp1.mbn” copy and paste it without the inverted commas in the command prompt to flash the DSP and phone screen will show a line ending with exclamation.
Step 7: Enter the command “fastboot -i 0x413c reboot” inorder to reboot the device and hold the volume rocker keys as advised earlier to enter into the streakMod Recovery menu.
Procedure to upgrade to a customized rom :
link of video for assistance : http://www.youtube.com/watch?v=3izgMselF-k&feature=plcp
NOTE :
1. Follow every instruction provided to the point mentioned by the DEVELOPER specified on the page for PRE-installation,POST-installation requirements and procedures.
2. YOUR DEVICE IS YOUR RESPONSIBILITY.NO ONE IS FORCING YOU TO UPGRADE TO A CUSTOMIZED ROM.IF U BREAK OR END UP SCREWING YOUR DEVICE I AM NOT RESPONSIBLE ITS YOU ALONE WHO IS TO BE BLAMED.
Installation procedure :
1. Download the .zip file and without making any changes dont even rename it save it anywhere on the SD card.
2. TURN your device off.
3. While rebooting it hold the power button until the LED comes up i.e the softkey light and then leave the power button and hold the volume rockers and you will be taken to the black screen having three options .(FOR DELL STREAK)
4. For navigation use the volume rocker button and for selecting an option use the camera button.
5. Select "Software upgrade via Update.pkg on SD Card" in the menu
6. Go to the link provided for further assistance.
LINK FOR THE DJ STEVEN'S GINGER STREAK 2.4.4 :
Link : http://forum.xda-developers.com/wiki/Dell_streak_5/ROMs
Link for installation procedure : http://forum.xda-developers.com/show....php?t=1333010
ISSUES:
Issue i faced after flashing the above ROM was i wasnt able to check my balance nor i was able to recharge my phone it was coming up with the error Invalid Code or CMMI error.
Follow the below link for resolution :
ISSUE FIX Link : http://techienetizen.blogspot.com/20...m-fix-for.html
Steps for FIXING the issue:
1. Download the .zip file and place it anywhere on the Sd card of the phone.
2. Turn off the device and reboot it into recovery by selecting the option "Software upgrade via Update.pkg on SD Card" in the menu
3. In recovery menu select update using update.zip
4. In the next screen select choose the zip file
5. Next screen will show all the files present in the SD card select the USSD_fix file you have downloaded
6. Select the option install from USSD_fix.zip file
7. The process will run and once its done
8. will prompt your and just navigate back using the back button on the softkey on dell streak
9. Select the option reboot the phone now.
Hopefully the issue for me was resolved and i wish so will it be for you aswell.
LINK FOR LONGHORN 2.9.1 :
Link : http://forum.xda-developers.com/wiki/Dell_streak_5/ROMs
Link for installation procedure : http://forum.xda-developers.com/show....php?t=1355878
ISSUES:
The only issue i have faced after flashing Longhorn 2.9.1 was on my first start up after upgrade my device was just stuck & circling on the bootanimation i.e., “XBOX360”
RESOLUTION:
Try longhorn 2.7 first and then wipe data/factory reset , wipe dalvik cache and do dell factory default too...
if it manages to go into lockscreen... you can then try to flash longhorn 2.9 and guess what it worked for me and incase you may experience this issue hope it resolves yours too.
Steps for FLASHING the .zip files by streamMod revovery menu:
1. Download the .zip file and place it anywhere on the Sd card of the phone.
2. Turn off the device and reboot it into recovery by selecting the option "Software upgrade via Update.pkg on SD Card" in the menu
3. In recovery menu select update using update.zip
4. In the next screen select choose the zip file
5. Next screen will show all the files present in the SD card select the .zip file you have downloaded
6. Select the option install from .zip file
7. The process will run and once its done
8. will prompt your and just navigate back using the back button on the softkey on dell streak
9. Select the option reboot the phone now.
THE ABOVE SPECIFIED STEPS ARE COMMON FOR ALL THE LINKS PROVIDED
LINKS OF ISSUE:
Please check the page 41 for screen auto rotate issues
Link : http://forum.xda-developers.com/show...rtrait&page=41
Please refer page 47 for to set portrait as the default screen orientation
Link : http://forum.xda-developers.com/show...355878&page=47
For LED Notification and camera FIX for longhorn 2.9 please refer page 64
Link : http://forum.xda-developers.com/show...355878&page=64
Link for wifi fix for longhorm 2.9.1 please check the below page 66
Link : http://forum.xda-developers.com/show...355878&page=66
Patch for longhorm 2.9.1 please check the below page 75
Link : http://forum.xda-developers.com/show...355878&page=75
LINKS OF SOME BOOTANIMATIONS:
dell streak logos bootanimation please check the below link
Link : http://forum.xda-developers.com/show....php?t=1823825
Ice cream sandwich bootanimation please check the below link out
Link : http://forum.xda-developers.com/show....php?t=1298338
- A NEWBIE
Decent tutorial, but you're making this far more complex than it need be. The Streak is perhaps one of the easiest devices to root in that it doesn't require a one-click root tool to do it. Instructions.can be found in the XDA Wiki here. The one thing that seems to trip people up when rooting the Streak is letting it boot completely after installing StreakMod or ClockWorkMod. After installing the recovery, immediately booting into the recovery will allow you to install Superuser, which is all you need to root a Streak. Once rooted, let the Streak boot completely, use a file manager to rename or delete install-recovery.sh, and then install the recovery again. Install-recovery.sh is a script which restores the stock recovery on every boot. Renaming the file prevents it from running.
Additional information can be found here.
Strephon Alkhalikoi said:
Decent tutorial, but you're making this far more complex than it need be. The Streak is perhaps one of the easiest devices to root in that it doesn't require a one-click root tool to do it. Instructions.can be found in the XDA Wiki here. The one thing that seems to trip people up when rooting the Streak is letting it boot completely after installing StreakMod or ClockWorkMod. After installing the recovery, immediately booting into the recovery will allow you to install Superuser, which is all you need to root a Streak. Once rooted, let the Streak boot completely, use a file manager to rename or delete install-recovery.sh, and then install the recovery again. Install-recovery.sh is a script which restores the stock recovery on every boot. Renaming the file prevents it from running.
Additional information can be found here.
Click to expand...
Click to collapse
Basically, the thing is what all i did for Flashing a customized ROM on my DS5 and like wise all the research i did in that regards is all mentioned,including some MODs developed by able DEVs which basically were distributed in different pages all i did is put'em together for sophisticating the readers and getting the most out of it....
I really appreciate your effort for the time that you have incurred in reading the article and sharing with me some fragments of your vast knowledge...cheers
Regards,
moid
The only reason I mentioned the Flashing Guide itself is to point out what it says about one-click root tools. They're not necessary and they can brick the Streak if they issue a fastboot -erase command after they are done. Fastboot -erase is pretty much a death sentence for the Streak.
This is long, but it's nice for noobs because it's detailed. It's honestly kind of fun, I promise. I'm assuming you have WINDOWS. This is based off of the guide by torxx!. It's modified because some of the info is outdated (you don't have to flash the boot.mg separately, for example). If you are NOT a noob you can just look at the "overview" for each step. This will work with all versions of the HTC One, assuming the kernel works. I have only tested the kernel with the T-mobile variant because that's what I have.
UNLOCKING YOUR DEVICE WILL WIPE YOUR DEVICE. THIS IS A SECURITY FEATURE. BACKUP FIRST.
Part 1- gaining unlock token
Overview: go to htcdev.com and unlock bootloader
Be sure you've turned off fast boot option in power menu; usb debugging should be on (settings -> developer options).
Go to http://www.htc.com/www/software/htc-sync-manager/[1] and install HTC SYNC. Alternatively, if you know what you're doing, you can install these drivers:
x86 http://www.mediafire.com/?qabo1tue2v1ky75 x64 http://www.mediafire.com/?8dl8s3l9mr6ggr9
Go on http://www.htcdev.com[4] and create yourself an account on HTCDEV.
Download these adb/fastboot files: http://d-h.st/RvD
Make a new folder anywhere. We'll use C:/fastboot as an example.
Extract the zip downloaded to the new folder
Go Here http://www.htcdev.com/bootloader/[6] and select "All Other Supported Models" and "then begin unlock bootloader" (check the boxes, click proceed, all that good stuff). YOU CAN IGNORE THE DIRECTIONS THAT THEY TELL YOU (and follow this guide instead).
Power off your phone. Power your phone on by holding power and volume down.
Highlight 'Fastboot' the volume buttons then press power to "select".
Plug your phone into your PC and open a Command Prompt. (windows XP - Click Start > Run > type CMD in box then press OK; Windows 7 - Click Start > type CMD in search box then press Enter) Change directory to your folder where we put fastboot files by typing cd c:\fastboot for example.*
*Alternatively, you can just hold down shift and right click in the folder and select "open command window here". Neat huh?
Type this into your command prompt window: fastboot oem get_identifier_token
Select & copy the text as per step 9 on the HTCDev website
Paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
Download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files
Type this into your command prompt window: fastboot flash unlocktoken Unlock_code.bin
The Display Will change on your phone, press Vol+ to accept and power to confirm.
Part 2
Overview: flash your recovery. Boot into recovery. Turn phone off if it boots into OS. Boot into back into recovery. You're done!
Download a recovery:
TWRP (the one I use): http://forum.xda-developers.com/showthread.php?t=2173870
CWM 2: http://forum.xda-developers.com/showthread.php?t=2172979
CWM: http://forum.xda-developers.com/showthread.php?t=2173863
Place the Recovery file to the folder where the fastboot.exe is.
Same thing as above- boot (volume down + power) into the bootloader and highlight 'Fastboot' the volume buttons then press power to "select".
Do the same thing as with the command prompt above. This time, however, you'll be typing:
fastboot flash recovery "name_of_the_recovery.img"
For example:
fastboot flash recovery openrecovery-twrp-2.5.0.0-m7.img
then type:
fastboot erase cache
From the menu, boot into recovery (use volume to move up and down, power to select). The phone might boot to the OS instead of recovery, don't worry!
Turn off phone then turn on (while holding volume down) to boot back into the bootloader.
TAMPERED shows up, boot into recovery and now your recovery should be working!
Part 3- obtaining root
Overview: flash a super tool
Download a super user tool for root:
SuperSU (I use this one): http://forum.xda-developers.com/showthread.php?t=1538053
SuperUser: http://download.clockworkmod.com/superuser/superuser.zip
Alternatively, download this: http://forum.xda-developers.com/showthread.php?t=2266025. This is a stock rooted rom for T-Mobile. If you download and flash this instead of the super user tool, you're done. (This rom includes super user)
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip super user tool to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
If you are a t-mobile user you're not out of the woods yet! The stock kernel is system write protected, so you still can't modify it (changes won't "stick"). You'll have to flash a custom rom or a kernel if you want stock instead.
I recommend these kernels: http://forum.xda-developers.com/showthread.php?t=2255900 or http://forum.xda-developers.com/showthread.php?t=2233665&highlight=menu
Download it.
Installing custom rom/kernel ("flashing a rom")
Overview: Download Rom, boot into recovery and wipe and then flash.
According to Shenye, even though your device is s-on, you can still flash boot now. So just do this:
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip kernel/cutom rom to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
ixrs said:
This is long, but it's nice for noobs because it's detailed. It's honestly kind of fun, I promise. I'm assuming you have WINDOWS. This is based off of the guide by torxx!. It's modified because some of the info is outdated (you don't have to flash the boot.mg separately, for example). If you are NOT a noob you can just look at the "overview" for each step. This will work with all versions of the HTC One, assuming the kernel works. I have only tested the kernel with the T-mobile variant because that's what I have.
UNLOCKING YOUR DEVICE WILL WIPE YOUR DEVICE. THIS IS A SECURITY FEATURE. BACKUP FIRST.
Part 1- gaining unlock token
Overview: go to htcdev.com and unlock bootloader
Be sure you've turned off fast boot option in power menu; usb debugging should be on (settings -> developer options).
Go to http://www.htc.com/www/software/htc-sync-manager/[1] and install HTC SYNC. Alternatively, if you know what you're doing, you can install these drivers: x86 http://www.mediafire.com/?qabo1tue2v1ky75 x64 http://www.mediafire.com/?8dl8s3l9mr6ggr9
Go on http://www.htcdev.com[4] and create yourself an account on HTCDEV.
Download these adb/fastboot files: http://d-h.st/RvD
Make a new folder anywhere. We'll use C:/fastboot as an example.
Extract the zip downloaded to the new folder
Go Here http://www.htcdev.com/bootloader/[6] and select "All Other Supported Models" and "then begin unlock bootloader" (check the boxes, click proceed, all that good stuff). YOU CAN IGNORE THE DIRECTIONS THAT THEY TELL YOU (and follow this guide instead).
Power off your phone. Power your phone on by holding power and volume down.
Highlight 'Fastboot' the volume buttons then press power to "select".
Plug your phone into your PC and open a Command Prompt. (windows XP - Click Start > Run > type CMD in box then press OK; Windows 7 - Click Start > type CMD in search box then press Enter) Change directory to your folder where we put fastboot files cd c:\fastboot*
*Alternatively, you can just hold down shift and right click in the folder and select "open command window here". Neat huh?
Type this into your command prompt window: fastboot oem get_identifier_token
Select & copy the text as per step 9 on the HTCDev website
Paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
Download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files
Type this into your command prompt window: fastboot flash unlocktoken Unlock_code.bin
The Display Will change on your phone, press Vol+ to accept and power to confirm.
Part 2
Overview: flash your recovery. Boot into recovery. Turn phone off if it boots into OS. Boot into back into recovery. You're done!
Download a recovery:
TWRP (the one I use): http://forum.xda-developers.com/showthread.php?t=2173870
CWM 2: http://forum.xda-developers.com/showthread.php?t=2172979
CWM: http://forum.xda-developers.com/showthread.php?t=2173863
Place the Recovery file to the folder where the fastboot.exe is.
Same thing as above- boot (volume down + power) into the bootloader and highlight 'Fastboot' the volume buttons then press power to "select".
Do the same thing as with the command prompt above. This time, however, you'll be typing:
fastboot flash recovery name_of_the_recovery.img
For example:
fastboot flash recovery openrecovery-twrp-2.5.0.0-m7.img
then type:
fastboot erase cache
From the menu, boot into recovery (use volume to move up and down, power to select). The phone might boot to the OS instead of recovery, don't worry!
Turn off phone then turn on (while holding volume down) to boot back into the bootloader.
TAMPERED shows up, boot into recovery and now your recovery should be working!
Part 3- obtaining root
Overview: flash a super tool
Download a super user tool for root:
SuperSU (I use this one): http://forum.xda-developers.com/showthread.php?t=1538053
SuperUser: http://download.clockworkmod.com/superuser/superuser.zip
Alternatively, download this: http://forum.xda-developers.com/showthread.php?t=2266025. This is a stock rooted rom. If you download and flash this instead of the super user tool, you're done. (This rom includes super user)
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip super user tool to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
If you are a t-mobile user you're not out of the woods yet! The stock kernel is system write protected, so you still can't modify it (changes won't "stick"). You'll have to flash a custom rom or a kernel if you want stock instead.
I recommend these kernels: http://forum.xda-developers.com/showthread.php?t=2255900 or http://forum.xda-developers.com/showthread.php?t=2233665&highlight=menu
Download it.
Installing custom rom/kernel ("flashing a rom")
Overview: Download Rom, boot into recovery and wipe and then flash.
According to Shenye, even though your device is s-on, you can still flash boot now. So just do this:
Turn on your phone again (and disable usb debugging) and connect to computer, copy the .zip kernel/cutom rom to a location you remember ON the phone.
Flash it with the Recovery: Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader Navigate with VOL and Power to Recovery Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
Click to expand...
Click to collapse
Thanks for this awesome tutorial man. It definitely should help give noobs a much better understanding!
Sent from my HTC One using xda premium
thanks! this worked great. perfect for all the noobs
Thanks!! I was on the fence about rooting (since the one is so great out of the box) but had an immediate need for tethering. You got me up and running in ~20 Minutes!!
Glad to hear! I think you may have rooted your phone faster than me, lol.
Thank you for this. I am on the fence about which new device i will be purchasing and good to know someone went to the trouble with rooting instructions
rolling56 said:
Thank you for this. I am on the fence about which new device i will be purchasing and good to know someone went to the trouble with rooting instructions
Click to expand...
Click to collapse
Thanks for your kind words! I tried hard to make these instructions as easy as possible, it looks like others found it easy but if you have any questions let me know.
im having trouble unlocking. after i get the unlock code and put it in my folder, i do the cmd 'fastboot unlocktoken Unlock_code.din'. but i get an error "cannot load Unlock_code.bin". am i missing something?
OK
I'll test it out on mines here and let you know
msterner123 said:
im having trouble unlocking. after i get the unlock code and put it in my folder, i do the cmd 'fastboot unlocktoken Unlock_code.din'. but i get an error "cannot load Unlock_code.bin". am i missing something?
Click to expand...
Click to collapse
Did you change directory to that folder?
Can you take a screenshot?
ixrs said:
Did you change directory to that folder?
Can you take a screenshot?
Click to expand...
Click to collapse
Worked like a champ! Thanks! I can't believe I missed that.
Does anyone know where I can find the stock ROM for T-Mobile to flash back to stock?
kgor93 said:
Does anyone know where I can find the stock ROM for T-Mobile to flash back to stock?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2276446
Seems to be where the stock stuff is at.
ixrs said:
http://forum.xda-developers.com/showthread.php?t=2276446
Click to expand...
Click to collapse
Thank you! I've been looking all over for that. Guess it was finally posted today.
kgor93 said:
Thank you! I've been looking all over for that. Guess it was finally posted today.
Click to expand...
Click to collapse
The only problem is that it has not been zipped, so we cannot use it to flash back to stock yet. Once it does, I'm going to be all over it! I wish I had been a bit more patient and just stuck out stock a few days more. I would've been able to realize how much disabling of installed apps just through the HTC settings menu. Not everything can be "disabled", but quite a bit can...
One of the few times where I think stock software is pretty good! Props to HTC!
I've heard this kinda thing voids the warranty, is that the case for the t-mobile 0ne?
Great tutorial but as usual I have been having saveer problems getting the HTC device to install properly so it can be detected in fastboot and recovery. Have been trying on both my laptop and desktop all day...
whitephenix said:
Great tutorial but as usual I have been having saveer problems getting the HTC device to install properly so it can be detected in fastboot and recovery. Have been trying on both my laptop and desktop all day...
Click to expand...
Click to collapse
Where are you stuck? I heard there was a problem with Win 8 x64 on usb 3.0.
Their was a problem for me with Windows 7 pro on my desktop but i finaly got it to work on my laptop.. I am led to think due to previous issues ultimate works better than pro or perhaps my hardware configuration on my homebrew leads windows to have certain comparability issues... The issue is spacifically with hardware detection and driver install errors. But like I said I got it to work on my laptop.
Sent from my HTC One using xda app-developers app
How easy is it to revert back to stock if you decide you don't want to use a custom rom anymore? Are factory images available to flash? Is it as easy as Samsung phones?
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Sajad Askari said:
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Click to expand...
Click to collapse
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
damulag1234 said:
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
Click to expand...
Click to collapse
No problem
Just install Flashtools V 0.9.18.5
And install Your Drivers
And Do flash Your Rom
No need usb Debugging
Are You Can Flash Stock ROM?
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Si_NZ said:
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Click to expand...
Click to collapse
my z2 is turned off and i already flashed but i used a wrong firmware.
my z2 now is not opening or booting and it say The software update failed
what should i do?
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3P...RTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/dow...41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn...ew?usp=sharing
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
i need the key to download can you provide it for me?
damulag1234 said:
i need the key to download can you provide it for me?
Click to expand...
Click to collapse
Ok, no problem but for which one?!
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
damulag1234 said:
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
Click to expand...
Click to collapse
Sorry for this problem,, but i have edited my post and provided you with a new alternative link (for Minimal ADB and Fastboot) see it again.
and i will check the other links now and if any another link is unavailable i will change it for you.
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
damulag1234 said:
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
Click to expand...
Click to collapse
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Mostafa Sherif said:
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Click to expand...
Click to collapse
how to use md5 file? do i just need to paste it?
damulag1234 said:
how to use md5 file? do i just need to paste it?
Click to expand...
Click to collapse
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it and continue doing these steps only.
Do the steps as i write it and your phone will boot again successfully
Mostafa Sherif said:
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it.
Do the steps as i write it and your phone will boot again successfully
Click to expand...
Click to collapse
the twrp file is an md5 file sir
damulag1234 said:
the twrp file is an md5 file sir
Click to expand...
Click to collapse
Download the twrp.img from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
After you download it you will see it's name is twrp-3.0.2-0-sirius.img
Then continue my steps normally and tell me if there is any problem
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
damulag1234 said:
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
Click to expand...
Click to collapse
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Mostafa Sherif said:
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Click to expand...
Click to collapse
i followed it what about the number 10? should i put it before i enter the command from number 9?
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
binocchio said:
this is exactly what i was looking for 3 weeks ago. my sister asked if i could have a look at her old tablet. i managed to do it by translating myself through some russian forums. btw. does netflix work? on my sisters one it does not atm. i guess the play protect thing.
Click to expand...
Click to collapse
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
mutrin said:
You need to download apk from Netflix site.
https:// help.netflix.com/en/node/57688
direct link to apk
https:// netflixhelp.s3.amazonaws.com/netflix-4.16-200217-release.apk
Click to expand...
Click to collapse
my sister is very grateful
Thank you very much.
What build date has this rom? Sec. patches?
Can you please post your local manifest?
Very interesting guide, unfortunately the links don't work...
Is it possible to restore them?
Tanks. Max
I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
I have only found lineage os for x30l, can someone please link lineage (Android 7) for x30f?
The difference between L and F is that L is the sim card variant. Ive read several people getting "insert sim card" when installing L on a F tablet. So I dont want messages like this.
Thanks for this tutorial. It was possible, to upgrade this old Tablet.
Do you know, if there is anything newer version for our Lenovo?
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
Same here
For me, this worked:
Lg v20 keeps booting to twerp recovery after factory reset. Megarom
Really not loving this phone and this rom. After learning I can't return to stock. Decided to factory reset it andoesn't then it boots directly to twerp recovery. Do did the first factory recovery from within the phone. Then after it booted into...
forum.xda-developers.com
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
it seems that google drives are off. Can someone re-upload please?
Hallo,
I have installed LiOS14-UNOFFICIAL-TB2-X30L.zip. The installation was without problems.
But I am having problem with WiFi - problem of MAC 02:00:00:00:00:00. I have tried a lots of tips but nothig worked. Two times I was succesfull to set some MAC, but always, after while, it was gone. No able to reproduce to set.
Is it really so difficult to set somehow the MAC addres for the WiFi?
As I understand the setting of the MAC differs between different releases of OS. Does anybody know how it work in this release? It should by known where this relaese expects the MAC setting. Am I right?
1. temporary succes: Setting MAC in system/etc/firmware/wlan/qca_cld/wlan_mac.bin (I think. Its longer time ago and there was more attempts). It lasted for few months. It is not mine device so I don't know how it was handled.
2. temporary succes: I copied system/etc/firmware/wlan dir to system/vendor/firmware/wlan. I did it based on how it is in Samsung Galaxy S4 mini with Lineage 16. It worked. After restart I had to swith off and on the airplane mode to set MAC. After few attempts it was gone. No able to reproduce to set the MAC.
I am not Linux expert
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thank you very much, install your rom on my TB2-X30F and it goes very well, the only drawback that I present is that the wifi is very slow but the rom is excellent, thank you very much for your work.
palamaro said:
it seems that google drives are off. Can someone re-upload please?
Click to expand...
Click to collapse
it still work. u just need to remove the space between htttp:// AND drive.google.com...
nonicktoday said:
The tablet can also run on LineageOS 16 which is Android 9.
As I saw that the guys in the Russian 4PDA-Forum had been able to create a LiOS16, I was able to make some adjustments and compile a ROM with most recent security patches which now runs on my good old TB2-X30L / TAB2 A10-30:
lineage-16.0-20210328-UNOFFICIAL-TB2-X30L.zip | by kenschbacher9 for 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Hi all, I've been trying to install the L16 version but I cannot install gapps or any zip from twrp. What is the procedure to install it correctly?
Boyalikus said:
I have followed the instructions and successfully installed LiOS14. Then, however, I have factory reset the tablet via Settings. Now it always boots to TWRP, no matter what I have tried I could not installed back the LiOS14 I only have TWRP right now.
Any help?
Click to expand...
Click to collapse
removing battery worked for me
Ive tried this tutorial and i bricked my tablet (i didn t backup the original firmware ) but i learned something new
for everybody who bricked their tablets lenevo tab 2 tb2 x30L do this:
1.first install Qualcomm_USB_Driver_v1.0 https://androiddatahost.com/nbyn6
2.install qfill 2.0.0.5 https://mydevfiles.com/download/qfil-tool-v2-0-0-5/
3.in qfill select flat build , progammer path is where you have your stock rom and load content same thing
4.press volume up +volume down and power button at the same time on your tablet *screen should be black*
5.press download content in qfil as soon as you connect the tablet to pc
stock firmware https://firmwarefile.com/lenovo-tab-2-tb2-x30l
^ english is not my first language so sorry for mistakes ^
[DELETED]
mutrin said:
After few day i find out solution how to install custom ROM to my Lenovo tablet. I think its first guide how to do it because every other guides were for TB2-X30F but not for TB2-X30L.
Installation guide:
FILES TO DOWNLOAD:
ALL FILES: https:// drive.google.com/drive/folders/1heVQAryphuXNVt5k-HsUhfRrVr9MV34D
ALL LINKS WORK ! JUST DELETE THE SPACE BEFORE drive.google.com...
1) On the tablet, at Settings, you must activate on the Developer Options the Bootloader Unlock (OEM unlocking) and USB debugging. Uncheck Verify apps over USB.
How to unlock Developer: https: //youtu.be/g5wkFAWDsg0
2) Download these files directly to your Android device, not to SD card.
a) https:// drive.google.com/file/d/1230xFbPA7DOGMhuX59yagEd6w1gNCI4o/view SuperSU-v2.79.zip (for me working only v2.79)
b) https:// drive.google.com/file/d/1vRW5RZixtNVfKbJ7nL2EUetANydfmLNg/view Gapps.zip (open_gapps-arm-7.1-micro-20180721)
b) https:// drive.google.com/file/d/13Mp8guzzOvb17s88IQyez_9reozpTNbw/view boot.img (from LiOS14-UNOFFICIAL-TB2-X30L)
3) Power off completely the tablet.
4) REMOVE SD CARD ! (because for me a part of system was installed on SD card).
5) Make sure you have a good cable so the connection between PC and tablet is perfect.
6) Download https: //drive.google.com/file/d/1XTDYs7kxagj-CXHsH_yyQnMXqYwAP_hK/view ADB and Fastboot to your PC .(here are the drivers too).
7) Unzip the zip archive and run with Administrator the apps from inside of the zip. To all the questions you must to press key Y to grant all the rights it needs.
8) Press and hold Volume up and plug in usb. Now you are in stock recovery menu.
9) From stock recovery select reboot to bootloader by using volume keys and power keys.
10) Wait about 5-10sec to tablet boot in bootloader mode. (shows lenovo logo in screen when ready)
11) Download the https:// drive.google.com/file/d/15IH55DgmD6SmlILjTukGeNcmYgUPcmCg/view recovery.img(its TWRP version for Lenovo Tab2 x30f so it wont work properly) and copy it into folder adb at local disk C (installed on step 7)
12) Run CMD with administrator and type cd C:\adb to select the adb folder.
13) In cmd type fastboot unlock-go and press enter. In case this command does not work, please try fastboot -s or fastboot oem unlock-go or fastboot oem unlock .
14) Flash recovery with command fastboot flash recovery recovery.img and then type fastboot boot recovery.img
15) From TWRP select Install and browse to emmc folder and then to your folder where you stored all files you downloaded.
(in bottom right corner you have Images... or Zips... here you can choose what type of file you want to install.
Install SuperSU-v2.79.zip
16) Now in menu select Wipe -> Advanced Wipe and check Dalvik Cache, Data and Cache. Wipe them.
17) Go back to menu and select Install. And install boot.img. At top of display check Boot and flash it.
19) Download https:// drive.google.com/file/d/1MlDxidIqLOZv_QZ91i8bsHgGdBMf7l9g/view LiOS14-UNOFFICIAL-TB2-X30L.zip and copy it into folder adb at local disk C (C:\adb).
18) Go to Menu select Advanced and open ADB Sideload. Go back to CMD on your pc and type
adb devices
If its your tablet properly connected you will see some letters and numbers and sideload. After that type
adb sideload LiOS14-UNOFFICIAL-TB2-X30L.zip
Now wait for finish the installation. If its installed corectly you will see Succesful at the top.
19) Repeate step number 15 and again install SuperSU-v2.79.zip (In installation you will see Boot image patcher)
20) Unplug your tablet from PC. And reboot it. First reboot may take 5-10 minutes and can reboot few times. DO NOT INTERRUPT THIS PROCESS.
21) After first start (set language, date..) Turn off devices.
22) Power on devices to recovery mode
(Press continuously the volume up and power key. When the screen on the tablet has started, release the power key and keep pressing the volume up key)
23) Now select again Install and install Gapps (open_gapps-arm-7.1-micro-20180721.zip). Then reboot it.
Now you have installed LiOS14-UNOFFICIAL (Android 7.1), with all stock apps(gapps) and also rooted device.
Click to expand...
Click to collapse
Will this work with x30F?