Hello !
I just got the new s6 edge, but i figured a strange issue with the screen touch capacity, for some reason i got inexpected freez from the screen touch exeption made from physical button witch a perfectly responding. So it is not a freez of the phone but eventualy a freez from the tactil layer... ?
Any similar issue ?
Thanks !
nairod77 said:
Hello !
I just got the new s6 edge, but i figured a strange issue with the screen touch capacity, for some reason i got inexpected freez from the screen touch exeption made from physical button witch a perfectly responding. So it is not a freez of the phone but eventualy a freez from the tactil layer... ?
Any similar issue ?
Thanks !
Click to expand...
Click to collapse
Ps : issue does not diseapear when i switch off and on the screen or the phone ... but sometimes for no reason tactil capacity come back for few minutes
Edit : i sent it back. Ill have some news in 2 weeks
Resolved
nairod77 said:
Ps : issue does not diseapear when i switch off and on the screen or the phone ... but sometimes for no reason tactil capacity come back for few minutes
Edit : i sent it back. Ill have some news in 2 weeks
Click to expand...
Click to collapse
I got it back after 2 weeks, they repear the screen (And the battery... why ?)
Now it works fine !
Related
hi all since i bought my phone i got some serious problem which was the back button and menu button keeps vibrating when playing some games r browsing for 10 min it almost gets worst when u were using outdoor it vibrates more and cant use anymore so i just taken to service center and checked out they said some touch pad problem r may b screen
just yest i given it to service center but i think it cud b problem with screen bec when u hold the sensor it goes dark and u can clearly c the vibrating reduced so v have to live in bark place to get rid of this and one more thing if u lock the phone there was no vibration as well so it wont b problem with processor r mother board its just the screen r touch pad may b
and did anyone tried out turning off bravia engine?
do you have the mini or the mini pro?
Shivatink said:
hi all since i bought my phone i got some serious problem which was the back button and menu button keeps vibrating when playing some games r browsing for 10 min it almost gets worst when u were using outdoor it vibrates more and cant use anymore so i just taken to service center and checked out they said some touch pad problem r may b screen
just yest i given it to service center but i think it cud b problem with screen bec when u hold the sensor it goes dark and u can clearly c the vibrating reduced so v have to live in bark place to get rid of this and one more thing if u lock the phone there was no vibration as well so it wont b problem with processor r mother board its just the screen r touch pad may b
and did anyone tried out turning off bravia engine?
Click to expand...
Click to collapse
My Xperia Mini gots the same problem and turning off bravia engine does not help
a-k-t-w said:
do you have the mini or the mini pro?
Click to expand...
Click to collapse
i have a SE mini ST15i. i got same problem. Help please!
tks
I had my unit for two weeks now and so far i've never encountered this problem even though i've been playing a lot of games for more than 30 minutes.
What color and build number are your mini's? You check it out at the back of the unit after you've removed the battery.
mine is 11W31 Mini ST15i Black
Mine got the problem after 2 weeks, mine is 11W29 Mini ST15i Black
i got the same problem too... its really annoying... hope someone wud come out with a solution,,...
So, during the first two weeks your phone was working perfectly. And only after having it more than two weeks then the problem starts?
I had my unit 2 weeks and 2 days now. and have not encountered the back menu malfunction.
Yup i given back to service center and got back with in a day now i was testing it for 3 days since no problem so lets c how it goes later after some days
it may be the overheat problem..... after charging for a couple of hours it happens..
if u dont experience it,, u r lucky...
have a look at this link.. http://talk.sonyericsson.com/message/111285#111285
Since I bought the unit I've been charging it overnight before I sleep and so far it doesn't overheat. I've read it in the manual that it was alright to charge it as often as you like.
It seems that the build of the touch pad of this model is defective, just like with their unit the G900 which also had a lot of complaints.
Sent from my ST15i using XDA App
I just bought a archos 101 g9 when it was on sale on woot last week and so far it is working pretty good, however I have an annoying problem with it.
If it has been sleeping for over a few minutes (regular sleep, not the deep sleep) and I wake it back up the touch screen goes crazy. The bottom left corner keeps detecting a touch event. It will cycle from multiple on/off touches a second to one on/off every few seconds. If I rotate the tablet to portrait, it will start scrolling the screen none stop to the left. So far the only fix is to do a reboot.
It does not happen every time, just occasionally when I wake it up from sleep.
Today i got a case for it, and whenever it is in the case, the touch screen goes crazy. Same touch events in that same area.
I am guessing something is wrong with the digitizer. Anyone else seen this problem before?
Have the same problem, and as I've read on xda and archosfans forums, this isn't an uncommon issue. We'll just have to wait for a firmware update, as rebooting seems to fix it, so it doesn't seem to be a hardware problem.
Sent from my ARCHOS 101G9 using Tapatalk 2
I have exactly the same problems.
@ARCHOS: PLEASE FIX THIS PROBLEM. THIS IS A SERIOUS BUG !
Sensitive Touch
I have similar problems with the touchscreen. If I'm holding it with one hand by a corner, it detects touch. The rest of the time it is a little jittery and releases or double taps in games. It's still not a deal breaker, though.
I hope we don't have to swap digitizers to fix it.
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
I have a similar issue sometimes.
For me the fix is simply to clean the screen.
The strange thing is, it happens even when the screen doesn't appear to be especially dirty but I put the tablet to sleep, give the screen a serious clean with a microfibre cloth and the touchscreen issues vanish.
Could be a different issue to what you guys are having but the symptoms are the same and it's an easy 'fix' to try.
Hope it helps.
Sent from my ARCHOS 80G9 using xda app-developers app
feffrey said:
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
Click to expand...
Click to collapse
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
omegaRED7 said:
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I had not noticed that area in the settings before. Recalibrating it in the cover has helped a lot.
I pretty much had this since day 1......
The current state is ; it doesn't work at all then all of a sudden It will pop back into life and then pretty much go "mental" as already described, I also found it reacts poorly to minor temperature variations, i.e going from outside to inside and general day to day travelling. Recalibrating used to "help" but now has no effect.
From watching the debug logs part of me thinks it's a bit of both, hardware and software ( just a hunch ) I noticed the driver fail to get a "ping" response from the hardware a couple of times.
I've pratically given up on it myself and plugged a keyboard and mouse in via a hub on the full size usb...... The hub has now stopped working for some reason , I'm now on a OTG Keyboard with a Virtual Mouse Driver using the numeric keypad and some adb input trickery ,
I've got another touch screen/digitizer to plug in, just not got round to putting it in yet and a little part of me is starting to enjoy finding more elaborate ways of interacting with the device... :laugh:
Does anyone know who the OEM of the digitizer Unit is? My previous investigation led me to china but information seems to be thin on the ground with this one
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
Same problem and even managed a RMA from ARCHOS. Thing is your OC edition fixed it for me.
touch screen not work
I tried pressing the power button
Did not work :silly:
After repeated pressure on the Back
Touch returned to work now
Had same issue before & this common issue on HD2.
You going to need a new digitizer soon ...
Mister B said:
Had same issue before & this common issue on HD2.
You going to need a new digitizer soon ...
Click to expand...
Click to collapse
Thank you
But .. what is the digitizer ?
You have a link ?
my gf had this phone and this problem too. the reason was that the cable from MB to digitizer runs under the power button. And if you press power often, it's going bad.
Not really down to end button use alone. Main issue is the bond of ribbon to digitizer (touch screen) breaks down over time. Have had it happen on my own personal HD2 that has had light treatment & hardly any button use. Also seen it on an old stock hD2 almost fresh from the box. The things fail regardless of use really ... early & revision Digitizers seem about as bad as each other. So far our repaired handsets, Longest repaired being almost 1yr are still working great on $18USD replacement Digitizers ...
Hello, I want your help to fix my xperia go touchscreen problem. Well, Ive searched the similar problem on the forum but what I found is about "touchscreen not working" only.. was, it's very easy to text and slide trough the screens without any "not so responsive screen".. after few months my xgo became less sensitive like before, when I tried to type as fast as usual. The screen cant detect my touch.. I compared with my friend's xgo and it is easier to text on his xgo.. its because I flashed wrong rom? I flashed one roms so far (superJB and currently back on stock with phantom 1.0.9 kernel) thanks.
Xgo .100 JB with UBL.
Open your device's build.prop using any text editor and check
ro.sf.lcd_density=??
Compare its value with your friend's xperia go and edit it accordingly. After you've done with editing, restart your device.
Check screenshot in the attachment.
Note: Do not put value similar to that of screenshot. It is just for your reference.
If I helped you then press Thank you.
Sent from my MT27i using xda premium
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Devo1982 said:
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Click to expand...
Click to collapse
I have same problems with my xperia go .it became unresponsive ..
i didnt drop it just became like that .
I get this issue too since i accidently drop it. But when i try to testing games and the phone getting heat up and now its more sensitive than before. Maybe not as sensitive as back there at GB but its better now. Almost as sensitive as when i try using JB at 1st time i think.
Oh yeah.. i even already try to open it before to check if the connector are losen or something like that with no result. And already prepare to changing my touchscreen but i think its not necesary now. Hope this help
i have the same problem, mine im gonna change the digitizer this month.
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Please report here if your back to normal again after you change your digitizer. Coz mine still choosing something sometime if i swipe through it even the sensitivity is good now.
ah7 said:
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
Click to expand...
Click to collapse
I use mine to record fish on beach at first month but its still good at that time. Mine dropped few times but the last drop make it not sensitive as before, since i used it like what i post before the sensitivity back to normal but sometime (in 1 of 8) not recognize my touch.
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
LENNUJ said:
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
Click to expand...
Click to collapse
seems like mine is problem with digitizer too...(marking on red) Thx BTW
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
LENNUJ said:
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
Click to expand...
Click to collapse
yeah i use back cover too (i dont know about the brand). i dont think the back cover affect the digitizer coz i already use it at least 2 month after i buy mine but the digitizer is became troubled last month since i drop it.
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Hey , does the touch screen turn to normal after you change the digitizer ?
Please give a feedback on that . Anyone ?
Red stripes shows dead spots on my Xperia U, ill try replacing Digitalizer next week, but if anyone can report it before, it would be helpfully.
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
LENNUJ said:
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
Click to expand...
Click to collapse
Its china...
SIGNATURE OUTDATED. I now use honami moonwalker 4.2
"AndroidNoob69.... Your favorite NOOB!"
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
LENNUJ said:
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
Click to expand...
Click to collapse
Nice... because i am planning to replace my digitizer by my self too when i got my digitizer spare . Just need to know what the other things i would need to change it perfectly (Make sure my XGO still have water resistant capability). Sooo... i would appreciate if u could reporting back when you done it .
Same problem.. My phone is not sensitive as usual.. When typing and gaming, it is really annoying.. :'(
How much is the digitizer for Xperia U?
I didn't do nothing and the phone just became not sensitive to touch.. Sliding is good but when I press 3 times to screen.. Only 2 times approx is known to touch..
Help me out ? Only way is change digitizer?
Just make sure u didnt get touchscreen issue from lag. I use custom rom and the touchscreen is feel better, but some area still hard to use because mine is defect already. U could try search on google for ur digitizer price .
Sent from my ST27i using xda app-developers app
Hi XDA communtiy,
I've been breaking my head with the following question:
My responsive buttons stopt working.
It goes better after a factory reset, but then again. No home, back button...
It is a real pain in the *ss.
I don't think it is a hardware problem, more a software problem...
Do you think that if I install a ROM on my device this would clear my problem?
Does anybody has the same problem?
It began shortly after the android update 4.1.1.
Greetings,
Krikke
Hope you didn't dropped your phone?
You can try the roms f you want ...(Dn't forget to backup)
AkumDX said:
Hope you didn't dropped your phone?
Click to expand...
Click to collapse
What do you mean, are the responsive buttons know to break?
No serieus droppings happend, just the occasionally slip!
I also have a second device were the top screen is cracked, maybe put the two together in one?
Krikke001 said:
What do you mean, are the responsive buttons know to break?
No serieus droppings happend, just the occasionally slip!
I also have a second device were the top screen is cracked, maybe put the two together in one?
Click to expand...
Click to collapse
Yeah, you can try inserting the screen assembly of your current device into the one with cracked screen, if the responsive buttons are working correctly there and you don't need the second phone. Otherweise I don't know, can't really call it a software issue. What about logcats?