[Q] Connecting to 5Ghz wifi - Galaxy S6 Edge Q&A, Help & Troubleshooting

Dear All,
the phone sees the 2.4 Ghz wifi but not the 5 Ghz wifi anyway to solve this
regards

A lot of times this is router related. I have to set my channel width to either 40 or 20 in order for it to work. Be sure that you do not have it set to Auto or Mixed on your router.

Dear Globalrebel
Thanks for replying, I have already tried with auto & selecting each channels individually but still my phone doesn't see it, on the other hand I can see the 5Ghz wifi on the Iphone & on the note3
Regards

I'm not sure I have any suggestions for troubleshooting but I can see my 5Ghz WiFi at home and at work on my S6. At work I connected to the 5Ghz rather than the 2.4 and have not had any trouble with it.

bluff master said:
Dear All,
the phone sees the 2.4 Ghz wifi but not the 5 Ghz wifi anyway to solve this
regards
Click to expand...
Click to collapse
Maybe you hided the 5Ghz SSID from broadcasting?
Try creating a new Wi-Fi connection on the S6 manually.

Cr4z33 said:
Maybe you hided the 5Ghz SSID from broadcasting?
Try creating a new Wi-Fi connection on the S6 manually.
Click to expand...
Click to collapse
No, My SSID is not hidden and tried to add it manually still no success
any app to confirm if this is faut due to faulty hardware in the S6 edge?
Regards

Any possible way for S6 to see wifi 5Ghz channels 36 40 44 48?
regards

Same problem with S7
I have international version of S7 and I can't connect to 5GHz either.
Do you think that flashing a firmware from a different region can fix this.
Has anyone tried doing this?

Related

[Q] Wireless N on SGS2?

Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Is there any specific settings I need to configure on my router? I am using a Prolink H5004N adsl2+ modem with wireless N router. The modem is compliant to IEEE 802.11n standards, not draft-n and should work with the SGS2?
wind79 said:
Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Is there any specific settings I need to configure on my router? I am using a Prolink H5004N adsl2+ modem with wireless N router. The modem is compliant to IEEE 802.11n standards, not draft-n and should work with the SGS2?
Click to expand...
Click to collapse
Not sure, but I think that it will connect if your N-network are in the 2.4 GHz frequency area, but not in the 5.0 GHz
mljjlm said:
Not sure, but I think that it will connect if your N-network are in the 2.4 GHz frequency area, but not in the 5.0 GHz
Click to expand...
Click to collapse
Yup, tried that too, but still connects to G only. I have also tried configuring router to accept only N networks instead of G/N, but then the SGS2 will not even see the SSID when its performing a wireless scan.
wind79 said:
connecting our SGS2 to Wireless N network?
Click to expand...
Click to collapse
Ive got the same issue. Router Asus RT-N16 (b/g/n, 2.4GHz). Playing with different router firmwares, settings and so on - no luck so far.
Check the "advanced" settings by pressing the menu button in the wireless and make sure nothing wierd is set in there.
Otherwise, as long as the router is set to N only on the 2.4ghz band, it should at _least_ see the SSID.
That modem supports WPS, try pressing the WPS button on the back of the modem and then use the "WPS button connection" option in the wi-fi settings menu on the SGS2.
Remember the single-channel 802.11n 2.4ghz such as the SGS2 supports will only max out at 72mbps anyway so there's not a huge improvement over the 54mbps that 11g will give you, although 11n is more efficient.
grey77 said:
Ive got the same issue. Router Asus RT-N16 (b/g/n, 2.4GHz). Playing with different router firmwares, settings and so on - no luck so far.
Click to expand...
Click to collapse
I've got the same unit and it works fine with it, that said I'm running a recent build of the Tomato firmware on mine. I don't think I even powered it up fully with the original firmware...
knightnz said:
Check the "advanced" settings by pressing the menu button in the wireless and make sure nothing wierd is set in there.
Otherwise, as long as the router is set to N only on the 2.4ghz band, it should at _least_ see the SSID.
Click to expand...
Click to collapse
thx for fast reply
SGS2 can see SSID, but fails to connect until I force RT-N16 (with custom firmware, RT-N16-1.9.2.7-rtn-r3121) down to "Use 802.11 G only".
Never had any problems with other 802.11 N powered devices.
only wpa2-aes or no encryption are N-standard
wind79 said:
Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Click to expand...
Click to collapse
wireless N only officially supports either WPA2-AES encryption or no encryption. Devices with drivers that more closely comply to the spec will not connect to WEP or WPA.
I hope you fixed the issue. I stumbled across this thread while asking the same question; maybe someone else will benefit by having this thread wrapped-up also. No haters, egos, persons, etc please. It's been necessary already to block a few of you.

WIFI cannot see 5Ghz access point

I previously disabled 5Ghz frequency from Settings - WIFI - Advanced as previously I only had a b/g WIFI
Now I have bought Asus dual band a/b/g/n router+access point but my phone cannot see the 5Ghz network. It can see and connect to 2.4Ghz
I tried to enable 5Ghz but that option is not showing in WIFI advanced settings anymore!!
I have already reset and flashed new samsung firmware but that option is still not there..
1. Is there anyway to check if my phone is using 5Ghz?
2. Is there any secret code to enabled wireless frequency?
Any help would be highly appreciated.
Sent from my Samsung Galaxy S III using xda premium
Bump. I just got a brand new sgs3 (was a sgnote user), for some reason my sgs3 can't see my home 5ghz. I tried to Google and search about this issue but came up empty. My now sold sgnote and my others gadgets laptops etc. don't have any problem with this. Currently I'm on stock DLI8 and did flashed other stock Firmware and no juice. 2.4ghz working great but I need 5ghz as I live in congested 2.4 neighborhood. Hoping some kind soul could enlighten me about this issue.
WIFI cannot see 5Ghz access point [FIXED]
For those owners whose device can't see wifi 5ghz frequency, your device is not broken which I thought mine was.
The remedy is simple, set your wifi country to EU, JP, or others same as your routers bands, as samsung default was set to US ( my router E4200 is APAC region ).
Use RootExplorer and SQLite editor ( these apps from the same dev ) and go to "/data/data/com.android.providers.settings/databases/settings.db" in "secure" table, look for "wifi_country_code=XX" change XX to JP as in my case. Reboot your wifi. Et voila ! There it is my 5GHZ SSID !! :good:
plutozz said:
For those owners whose device can't see wifi 5ghz frequency, your device is not broken which I thought mine was.
The remedy is simple, set your wifi country to EU, JP, or others same as your routers bands, as samsung default was set to US ( my router E4200 is APAC region ).
Use RootExplorer and SQLite editor ( these apps from the same dev ) and go to "/data/data/com.android.providers.settings/databases/settings.db" in "secure" table, look for "wifi_country_code=XX" change XX to JP as in my case. Reboot your wifi. Et voila ! There it is my 5GHZ SSID !! :good:
Click to expand...
Click to collapse
Hi, my i9300 can see the SSID of WiFi 5GHz and is able to connect to it successfully. But it cannot auto-connect to the SSID of WiFi5GHz when the WiFi is disable and then enable. or i9300 device is rebooted, or come back to the room with WiFi 5GHz. This issue doesn't happen on WiFi 2.4GHz.
Did you encounter this issue?
plutozz said:
For those owners whose device can't see wifi 5ghz frequency, your device is not broken which I thought mine was.
The remedy is simple, set your wifi country to EU, JP, or others same as your routers bands, as samsung default was set to US ( my router E4200 is APAC region ).
Use RootExplorer and SQLite editor ( these apps from the same dev ) and go to "/data/data/com.android.providers.settings/databases/settings.db" in "secure" table, look for "wifi_country_code=XX" change XX to JP as in my case. Reboot your wifi. Et voila ! There it is my 5GHZ SSID !! :good:
Click to expand...
Click to collapse
Great, my auto-connection problem is resolved after changing the wifi_country_code to JP, but when I reboot the device, the value of the wifi_country_code has been restored to the orginal value. How to finallized it?
Thank you very much, My phone suddenly stoped detecting all wifi routers, it couldnt detect anything, and when i changed the country to Japan, it could detect again.

S9 Plus SM-G965F not detecting 5Ghz Wifi

Hi fellow xda members. I recently purchased the Samsung S9 Plus SM-G965F variant and in Wifi it cannot see the 5Ghz network that i have created. It will only detect the 2.4Ghz networks. I have installed the wifi-analyzer app as well but that also doesnt see it whereas my iphone can see it and connect to the 5ghz network without any issues. Ive been googling and searching this forum but couldnt find anyone having the same problem as me. I am not that experienced in android so dont know what could be the solution. Here are a few more details that might help
Baseband version: G965FXXU2BRG8
Build Number: R16NW.G965FXXU2BRGA
never mind....problem was with the router not broadcasting ssid on a greater channel range. Fixed it. Thread can be closed
iamextreme said:
never mind....problem was with the router not broadcasting ssid on a greater channel range. Fixed it. Thread can be closed
Click to expand...
Click to collapse
I'm also havingthe same issue.it's definitely not a problem with the router..my every device can detect 5ghz wifi while s9 plus can't. ? ..
What to plz help..
Go to your wifi router settings and change the 5Ghz channel. Set it to one that is not too crowded (use the wifi analyser app) and that all your devices can connect. In my case the channel 157 solved my problem. I live in Canada and channel regulations can be different depending on each country laws.
Solved It
NiKlaws said:
I'm also havingthe same issue.it's definitely not a problem with the router..my every device can detect 5ghz wifi while s9 plus can't. ..
What to plz help..
Click to expand...
Click to collapse
just put ur mobile on airplane mode than try to search for wifi, my note 10 plus can detect 5ghz wifi in this method.

5Ghz WiFi not working after updating to EMUI 9 (Pie)

I own the 8" LTE model (SHT-AL09) with stock ROM, unrooted and with locked bootloader. It originally had the EMUI 8 firmware SHT-AL09C636B196 (Oreo 8.0.0.196) but a few days ago I got an OTA and decided to upgrade it to the official EMUI 9 firmware SHT-AL09C636E2R1P2161 (Pie 9.0.1.161) and now 5Ghz WiFi networks don't work anymore.
Before the update, WiFi scan showed dozens of 5Ghz WiFi SSIDs in my area, including my own one, and I could connect to them without issues. Other apps such Wifi Analyzer also showed dozens of 5Ghz WiFi networks.
After the update, I can only see one distant 5Ghz network but not my own one. When I try to manually add my own 5Ghz SSID I got the error message "Unable to find MySSID".
It seems it is a hardware/system issue because Wifi Analyzer has also stopped showing all 5Ghz WiFi networks but one. I've used the mobile Hotspot feature of my other Android devices to rule out my router being the problem, but the issue persist. Needless to say other devices in my household (Android, WebOs, Laptop, ...) have no issues showing or connecting to my 5Ghz WiFi networks.
I can see many people having the same issue months ago when they updated their Honor phones, but so far nothing affecting the Mediapad.
Am I the only one with this issue? Any suggestion regarding what could I try to fix it?
Did you already try to change the channel on your router? Probably the channel you configured is no longer supported. This at least would explain why you can see other networks on 5GHz.
AndDiSa said:
Did you already try to change the channel on your router? Probably the channel you configured is no longer supported. This at least would explain why you can see other networks on 5GHz.
Click to expand...
Click to collapse
Thanks for the suggestion. I was using automatic channel. I've changed it to manual and tried several channels, but the result is still the same.
this exact issue happen to me (my son's Mediapad M5 Pro). just realized it today. tried resetting the tablet's network setting, connecting manually to the router 5G wifi. all to no avail. my other devices - 2 laptops, 2 mobile phones, 2 android boxes - all are connected to the router's 5G network without issue.
NeuroOne said:
this exact issue happen to me (my son's Mediapad M5 Pro). just realized it today. tried resetting the tablet's network setting, connecting manually to the router 5G wifi. all to no avail. my other devices - 2 laptops, 2 mobile phones, 2 android boxes - all are connected to the router's 5G network without issue.
Click to expand...
Click to collapse
I read in Reddit some people manage to "fix" it by using a different channel in the router, as @AndDiSa suggested. Try setting the Wifi channel to manual an test different ranges of channel. Try first with the lower ones (36, 38, ...,46,48 ). If it doesn't work try with the highest range (149, ..., 155 ). If it still doesn't work, you can configure your router to use another region/country with differnt channels range until you find one that works.
same here, mediapad m5 8 (SHT-AL09), wifi 5ghz not work after upgrade to pie 9.0.1.161, I think this is bug. I'm using another huawei P20Pro and Honor Play, there are no issue about wifi 5ghz and connected to the same router
Please fix it Huawei
No WiFi issues here after I installed the OTA update to 9.0.1.160.
Does it seem to be a problem for the lte versions only? Is anyone with a wifi only tablet experiencing this problem?
mattrask said:
Does it seem to be a problem for the lte versions only? Is anyone with a wifi only tablet experiencing this problem?
Click to expand...
Click to collapse
I've a wifi only M5 8 - both 2.4 and 5GHz wifi is fine for me on Emui 9.
Same here. I own my M5 8.4 inch LTE version and I updated to Android Pie yesterday. I tried to factory reset for a couple of times and it didn't solve the problem. I think it's a bug of this firmware version hopefully it will be fixed soon.
pentiuminside said:
same here, mediapad m5 8 (SHT-AL09), wifi 5ghz not work after upgrade to pie 9.0.1.161, I think this is bug. I'm using another huawei P20Pro and Honor Play, there are no issue about wifi 5ghz and connected to the same router
Please fix it Huawei
Click to expand...
Click to collapse
LTE version here
i have the same issue where my one is LTE version. No 5G signal detected after upgrading to emui 9.
any solution?
jk4287 said:
i have the same issue where my one is LTE version. No 5G signal detected after upgrading to emui 9.
any solution?
Click to expand...
Click to collapse
Try changing the WiFi channel of your router. Lower channels did the trick for me
Stolz said:
Try changing the WiFi channel of your router. Lower channels did the trick for me
Click to expand...
Click to collapse
Yes, i tried that and it can connect to it. But it is very buggy. The connection drops a lot compared to my other devices that connect to the same 5Ghz SID. It is very noticable when playing head-to-head game such as Clash Royale when the bar is about 2 bars. It just drops off and switch to mobile. I have never experience the issue before emui 9 or on other devices.
:| I might have to drop back to 2.4Ghz.
Non LTE, not able to connect to 5GHz.
Suddenly able to connect on channel 40 after changing channels a few times, which is the channel it was on anyway. Weird.
Just to add to this, it connects at 5GHz but soon defaults to 2.4GHz.
Just updated my M5 8"LTE(C432) to Pie and no issues with 5Ghz Wi-Fi band works as usuall. Must mention that after all bigger update I start from 0 so I allways do a factory reset and start from scratch. This can solve many problems
After Upgraded, my Mediapad M5 only can see 5Ghz lower channel wifi (eg. Channel 60),cant detect upper channel ( eg. Channel 157)
hello, I upgraded to Pie this week (mediapad m5 pro LTE), after restarting the tablet 5 mhz networks did not see them, I made a network reset from settings, and rebooted the tablet, now works fine. sorry for my English.
---------- Post added at 10:55 AM ---------- Previous post was at 10:43 AM ----------
Hello, after a few days that the tablet has worked well, it happens again that 5 mhz networks do not see them. I do a network reset again and it works again ... go pretty messy.
I have a WiFi only M5 10.8 inch device, and all was working fine until the OTA update. 5Ghz does connect to router but reports no Internet. Even though it reports this I can still browse using Chrome and can search for apps in the Play store but can't update or download any apps. I can use the same router on 2.4Ghz and everything is ok, so does look like a firmware issue.
"Great" job. As usual, from working device to buggy one.
How to disable update? I have WiFi only version and there is an option to auto-download update over WiFi, which I unchecked.
Sent from my CMR-W09 using Tapatalk

5GHz wifi not working on Redmi note 9 pro (indian)

I'm using Redmi note 9 pro(indian) variant. MiUi global stable 12.0.5
Recently i bought a xiaomi duel band router and i have separated 5GHz and 2.4GHz band in the router setting.
But my redmi 9 pro is showing only the 2.4 GHz SSD. Though it worked on 5GHz for few hours.
***There's no problem in the router as my laptop and other devices are working fine in 5G band.
***** I have tried changing the region. *****
I tried to manually add the network SSID and password but it didn't work.
Then i have tried to change the channel in router setting. It didn't work either.
Did anyone have faced this problem and know any solution?
This is a bug in android 11, the temporary solution is first open the hotspot and the connect wifi , wifi connected then go to wifi setting and change 'dhcp ip' into 'static ip' and then turnoff hotspot.
gsmyth said:
This is a bug in android 11, the temporary solution is first open the hotspot and the connect wifi , wifi connected then go to wifi setting and change 'dhcp ip' into 'static ip' and then turnoff hotspot.
Click to expand...
Click to collapse
Sorry didn't get you. 5GHz SSID is still not showing so how can i connect to that?

Categories

Resources