Hi,
I've just bought a chinese mobile ISA A19Q and I can't get root. It has MTK6589 and Android 4.2.1
I've tested:
* MTK Droid tools v2.4.3 , the phone asks me to restore , I accept and it starts restoring, it finishes in about 1 second and MTK Droid tools progress bar cycles for hours with no result.
* Root_with_Restore_by_Bin4ry_v25 with the same result, tries to restore the phone but it can't get root
* Flashtool with a recovery ROM from CWM with no result, in the beginning I could flash some images with no effect in the factory menu (booting with vol - and power) but since I restarted the software with the factory menu I can't.
Don't know if this menu has any option, to be root, I post a photo here: http : / / s11.postimg.org / draewjm2b / IMG_20130403_132418.jpg
Thanks in advance.
Got it
Finally rooted it! I've spent hours with this phone. I'll tell the process here soon.
Sweet, I've been trying to root my Alps MTK6589 but same problem. Eagerly awaiting your post about how you've done it!
Narathan said:
Sweet, I've been trying to root my Alps MTK6589 but same problem. Eagerly awaiting your post about how you've done it!
Click to expand...
Click to collapse
I also look forward to a description of root Alps MTK6589
I need root this phone too
blakeyed said:
Finally rooted it! I've spent hours with this phone. I'll tell the process here soon.
Click to expand...
Click to collapse
expect news and tell us how you did it
I have posted it in http://forum.xda-developers.com/showthread.php?p=40059065
I have found a better way to root any mtk6589 based phone,i ll make a thread soon!
Easy auto root method isa a19q
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
Thank you!:good::good::good:
Worked with my ASK SP581 HD
Rooted thl w100
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
done smoothly like a butter for THL W10..THANKS VERY MUCH
Thank-you
tijsh111 said:
please check bottom for download links
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers in the installation they ask for a brand select other.
After installing the drivers unplug your phone
3.Extract the Motochopper MTK6589 Auto Root folder from the .rar download
4.Connect your phone to PC
5.Run run.bat from the Motochopper MTK6589 Auto Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
8.You''re phone is rooted please check root with root checker. This worked for me and if you brick your phone just reinstall the isa a19q rom
rom is available here: check .txt file on the bottom for the rom
please press thank button
Click to expand...
Click to collapse
Thank-you so much, you've helped me greatly
Recovery
Very usefull guide, thank you!
But how can I install TWRP or Clockworkmod recovery??
thanks again
Hi,
I would like to share, as the uber noob that I am, the easiest way I found to root a Samsung Galaxy Tab 2 10.1 running on Android 4.1.1.
This tutorial is not from me, I do not take credit, I would just like to help spread the knowledge as it worked for me and made me a happy superuser noob. Please forgive me if I disturb or break any rules sharing this and just remove my post.
Hope it can help some =)
Here it is : HOW TO ROOT SAMSUNG GALAXY TAB 2 10.1 RUNNING ON ANDROID 4.1.1 (NOOB PROOF)
Root package works only with Samsung Galaxy Tab 2 10.1 P5100 running on Android 4.1.1 XXCLL2. Verify the model number of the device before proceeding.
Pre-requisites
1) Download and install USB drivers for Samsung Galaxy Tab 2 10.1.
2) Enable USB Debugging mode. [Press Menu>> Settings>> Applications. From there, navigate and tap on Development option and ensure the USB Debugging is turned on]
3) Ensure 80 percent battery charge
4) Ensure data back-up
5) The device should be factory unlocked.
6) The guide below just roots the tablet. In order to install custom ROMs, flash custom recovery like CWM recovery on the device
Steps to root Samsung Galaxy Tab 2 10.1 P5100 on Android 4.1.1 XXCLL2 Jelly Bean
1) Download CF-Auto-Root package for Galaxy Tab 2 10.1 to the PC. Extract the firmware zip file to get a file with .tar extension
2) Download Odin 3.07 and extract the zip file
3) Switch off the tablet and enter into Download Mode by pressing and holding Volume Down and Power buttons together. A warning message will appear, now press the Volume Down button to enter into Download Mode
4) Run Odin on the PC
5) Connect the Galaxy tab to the computer using USB cable. An 'Added' message will appear under Odin's message box. If the device is successfully connected to PC, COM port with a number in Yellow will appear
[Note: In case the added message is not seen, try another USB port. Reinstall the drivers if this fails]
6) In Odin, click the PDA button and select CF-Auto-Root-esspresso10rf-esspresso10rfxx-gtp5100.tar.md5
7) Hit the Start button in Odin to begin the flashing process
8) Once the installation is completed, a Pass message with green background will be seen in the left-most box at the top of Odin. The tablet will then automatically reboot and a Samsung logo will appear. Unplug the USB cable from the tablet
The device, Samsung Galaxy Tab 2 10.1 P5100 running on Android 4.1.1 XXCLL2 official Jelly Bean firmware, is successfully rooted. To ensure the aforementioned root method is installed and working properly, install Root Checker app which is available for free download from Google Play Store.
[Source: Android Jinn]
Link to the original tutorial where you can download Odin 3.07 and the CF-Auto-Root-esspresso10rf-esspresso10rfxx-gtp5100.tar.md5 file you will need : Can't post link! :crying: Hopefully someone can post a link to these things here as I'm sure we could find them on this great forum!
Hope it can help! Have a nice day!
CF-Auto-Root: https://download.chainfire.eu/240/C...-Root-espresso10rf-espresso10rfxx-gtp5100.zip
Odin: https://odindownload.com/download/Odin3_v3.10.6.zip
Karbonn a111 rooting method.
Download the file from this link or attachment
https://www.dropbox.com/sh/j60bewdi6veje92/1RHtPTzXZ-/SRSRoot-Setup.exe
Extract in your windows pc or laptop(works in windows only)
step 1: install in computer.
step 2: install drivers for your phone.
step 3: Select USB DEBUGGING ON in your phone (it can be found in under developer options in settings).
step 4: connect your phone with computer via usb.
step 5: run the installed software.
step 6: select root.
wait till the process ends
your phone will reboot twice.
that's all
enjoy root now.........................
guys this is sai teja
the most simplest way of rooting is here
firstly download unlock root
moborobo
and perfectly install all the drivers
now next step connect ur mob in usb debugging mode
thts it
open unlock root
click on root
select ur device and wait few seconds
after rebooting device the mob is rooted
credits : to me for exploring and descovering rooting guide
unlock root devs for making a nice application
and moborobo
Hire is if you want to root your 3970b in 5 step with motochopper
Download Link : https://www.mediafire.com/?n6ek9h5pf8p5z5k :cyclops:
You must enabled USB debugging in Settings before starting.:angel:
If you have Windows 8 install driver: https://www.mediafire.com/?tbxb38mxgiks11l
1.Connect you tab and PC with USB cable
2.Open folder motochopper
3.Righ click on run.bat and Run as Administrator
4.Then press any key on keyboard and wait 30 sec dont toch nothig wait you Tab to go restart (automatic)
5.And that is it you rooted you device
Sorry for bad Language I am from Serbia