Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
It could be one of two things imo. Defective unit or display unit.
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
I think the capacitive touch screen lights are automatically disabled if one of the power saving modes are activated. Check to see if one of them are enabled.
The behavior of the touch light keys is tied to the "power saving mode". By enabling "power saving" mode it seems the touch light keys remain off.
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Where are you guys finding the setting to adjust the capacitive lights? I've looked everywhere and can't find it. Even googled it. I want mine permanently off and all i found was "use power save mode for that"
Same thing here! I already contacted Samsung and Sprint, they don't know how to fix it! Take it to the store to get a replacement !
stretchwookie said:
Where are you guys finding the setting to adjust the capacitive lights? I've looked everywhere and can't find it. Even googled it. I want mine permanently off and all i found was "use power save mode for that"
Click to expand...
Click to collapse
Settings > quick setting > display > touch key light duration
odobo said:
Settings > quick setting > display > touch key light duration
Click to expand...
Click to collapse
Must be carrier specific. I have the tmobile version and that's not an option there. But my other samsungs i had at sprint all had that option right where you said it should be.
stretchwookie said:
Must be carrier specific. I have the tmobile version and that's not an option there. But my other samsungs i had at sprint all had that option right where you said it should be.
Click to expand...
Click to collapse
Download a app to turn it off then
odobo said:
Download a app to turn it off then
Click to expand...
Click to collapse
Which app?
optimummind said:
Which app?
Click to expand...
Click to collapse
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Averix said:
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Click to expand...
Click to collapse
Can confirm that this works great on the tmobile s6 edge
Averix said:
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Click to expand...
Click to collapse
Confirmed working on my Sprint S6E. Thank you!
Sent from my SM-G925P using Tapatalk
It works perfectly on my T-Mobile S6 Edge!
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
YES!!!! That fixed my issue too. This happened a couple weeks ago. I couldn't figure it out so I did a factory reset (fixed it). Now it cropped up again this past weekend. Glad I'm not the only one. It is an ugly software bug I hope gets fixed.
Definitely a Software Bug !!
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
scottiedoggy said:
YES!!!! That fixed my issue too. This happened a couple weeks ago. I couldn't figure it out so I did a factory reset (fixed it). Now it cropped up again this past weekend. Glad I'm not the only one. It is an ugly software bug I hope gets fixed.
Click to expand...
Click to collapse
I had the same issues you guys had on my international (SM-G925I) model. After factory reset it just works fine. Maybe its a software bug and hope Samsung fixes this with the next update ... :good: :good: :angel:
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
Thanks! It fixed mine too but I had to do an additional step of turning power saver off, then back on, then changing it to turn on at 15% (from immediately) and turning it back off.
Such a weird bug.
Had the same problem. Did restarts/ full wipe/ called customer service/ went to service carrier store.... Problem ended up being the case I had purchased (phone specific at that). If you have this problem try removing the screen protector and phone case restart the phone and plug into the charger. Keep in mind that I had the exact same case on without removal for a few weeks before it started interfering with the captive keys. My keys have been working 100% since minus the protection.
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
Thank you so much! Fixed mine this way
Related
i think i have the right idea here. i installed the helly bean rom a couple days ago and absolutely love it so far, however the home, search, menu, back buttons all stay lit if a notification for txt or email happens while its sleeping. for further clarification in case some dont understand what i mean, say i hit the power button to go into sleep mode and someone send me a txt the phone plays the sound and lights the bottom 4 buttons like normal but once done the bottom buttons remain lit and dont turn off until i wake the phone and put it back to sleep.
any ideas on where to change this? or is it part of the rom
mavicious said:
i think i have the right idea here. i installed the helly bean rom a couple days ago and absolutely love it so far, however the home, search, menu, back buttons all stay lit if a notification for txt or email happens while its sleeping. for further clarification in case some dont understand what i mean, say i hit the power button to go into sleep mode and someone send me a txt the phone plays the sound and lights the bottom 4 buttons like normal but once done the bottom buttons remain lit and dont turn off until i wake the phone and put it back to sleep.
any ideas on where to change this? or is it part of the rom
Click to expand...
Click to collapse
It is part of the ROM. It functions as a notification LED to let you know that you have a text/missed a call/etc. You shouldn't worry about it, it doesn't affect battery life.
You can turn off Notification Light in settings.
hongzhou94 said:
It is part of the ROM. It functions as a notification LED to let you know that you have a text/missed a call/etc. You shouldn't worry about it, it doesn't affect battery life.
Click to expand...
Click to collapse
ah ok, works for me then i wasnt to concerned about the battery as its just led so its such a minimal draw. just makin sure its not a bug of some sort
thx
Capative Hardware keys not lit until u press in captivate key area in Helly Bean
Hi There,
I just flashed my cappy to the HellyBean ROM, and everything works great! Thanks for such a nice ROM.
While using it I found one small issue,It could be a setting issue which I'm unable to figure so please help me out.
When i'm using the phone, in gingerbeard, it used to light the bottom 4 capacitive keys(Setting,HOME,BACK,SEARCH) all the time so that I can press them when i'm using the phone in dark. But in Hellybean, those 4 LEDs are not lit when the touch screen is used, those 4 buttons are lit only when I press in the Bottom area.
Please let me know how to make them ON even when i'm using the touchscreen area?
Thanks,
Raj
This is the vibrant section not captivate but I think there is a setting in devil kernel configuration app. Don't know for sure which exact setting controls that but I think there's another setting in display, try both. I don't use any bln because of battery use, plus I'm no longer running HB on my vibe or cappy.
Sent from my SGH-T959 using xda premium
Hello everybody.
I have a rooted 4.0.4 XXLFB Galaxy S3 and have noticed a problem.
Whenever I'm on a call using my blueooth headset, the screen turns on once every 30 seconds, give or take.
It's a problem because if I have the phone in my pocket, sometimes I mute the call, other times I turn off the headset...
Does anybody know how to solve this?
Thanks in advance.
Posting to add a "me too" to the list. Trying a ton of different things, almost to the point of clean device.
Hit the button and the screen turns off, about 2-5 seconds later, screen turns back on. Does not matter what I do. Seems to do it with speakerphone option too. If neither Bluetooth nor speakerphone are used, and you put the phone to your ear, backlight stays off. Otherwise, it automatically turns back on by itself. Tried with wifi on/off, speaker with bt on/off, different headsets, etc. My Wife's does not have this issue, so I gotta look into what is different. There has gotta be a setting or app installed that is doing this. I've even tried apps such as screebl and others. Some even had a thing to say lock it off till press button, and it still comes back on after 2-5 seconds. I've muted and hung up on many people when the phone was in my pocket because of this issue.
I've not used a BT headset but i'm thinking that maybe because the phone isn't against your head the screen comes on. possibly to give you information about the caller.
I'm not saying you should put the phone to your head even though your using bluetooth either.
thanks, but, don't help, tried that too. Had entire top half of phone covered during most tests. Screen does not turn off unless I press button, then comes back on automatically after 2-5 seconds. I did find one app today that seemed to work, but not sure if it works too well "Smart Screen Off".
Sounds silly but have you tried locking the handset?
That's what I meant by pressing the button. Button on right side that if I am not on a call, turns off screen and locks it.
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
visegrip72 said:
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
Click to expand...
Click to collapse
agree with the above. if you leave call status up while connected via BT headset, screen remains active (comes in and out). if you exit active call status (ie press home) then the screen timeout works. if you are talking on the phone without headset, no problem.
so yes, that's the prob. any solid fix yet?
please and thanks....
visegrip72 said:
Ok - narrowed it down a ton. If I leave the in-call status screen up, the screen turns back on after being turned off via power button. If I hit home or have any other screen active, it remains off. So dialer related, but I can deal with an extra button press.
Click to expand...
Click to collapse
Thanks a lot, visegrip. It was really frustating having to redial every other call because i hang up without noticing.
Any solution to this problem? Hitting a home button and locking the phone is not an option when I keep my phone in a leather holster on my belt. That's a main reason for having bluetooth as hands free.
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Almazick said:
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Click to expand...
Click to collapse
Almazick,
It would be great if you can send me the fix!
ital1981 said:
Almazick,
It would be great if you can send me the fix!
Click to expand...
Click to collapse
Here is the fix for a screen that I created. Let me know if it works or not for you.
http://www.mediafire.com/download.php?1ikj7d4wnjs9hx5
Almazick said:
Problem solved by using Tasker. If anyone need APK patch file to fix a problem, let me know and I'll post it here
Click to expand...
Click to collapse
You know, I use tasker and have been trying to figure this out for a while. I've also been trying Secure settings and Locale Using multiple settings and plug-ins. I have not been able to create anything yet that seems completely reliable.
Not trying to be rude or anything, but I am and always have been a little leary of installing APK files unless I know the source. However, if you would be so kind to post the contexts and tasks so that I may enter them myself manually, it would be greatly appreciated. Thank you in advance.
Inane65 said:
You know, I use tasker and have been trying to figure this out for a while. I've also been trying Secure settings and Locale Using multiple settings and plug-ins. I have not been able to create anything yet that seems completely reliable.
Not trying to be rude or anything, but I am and always have been a little leary of installing APK files unless I know the source. However, if you would be so kind to post the contexts and tasks so that I may enter them myself manually, it would be greatly appreciated. Thank you in advance.
Click to expand...
Click to collapse
Well, It's pretty easy.
Profile -> Phone Offhook
Task:
Wait 20 seconds
App-> Go Home
Display -> System Lock
In case if you'll have any problems just use my apk file which is exactly the same.
Good news! I just took the Jelly Bean update from sprint & this problem is FIXED!
I tried calling and turned off the screen and it stayed off!
I also called and didn't touch the screen and after the timeout, it turned itself off!
Hmmmmm... OK. Thank you. I'll have to try that and see how it works. I was looking, hoping and working on trying to get something that would keep the screen off. Dialing, talking and ending the call. I've got something that seems to work for the most part, (I still get quick flashes, which is fine) but still have some more work to do on it.
Sent from my ADR6425LVW using xda premium
visegrip72 said:
Good news! I just took the Jelly Bean update from sprint & this problem is FIXED!
I tried calling and turned off the screen and it stayed off!
I also called and didn't touch the screen and after the timeout, it turned itself off!
Click to expand...
Click to collapse
It's not fixed. I'm getting crazy about this master bug.
Is there any way to disable/alter the settings for the capacitive touch buttons on the S6 Edge? There's no option on the display menu to change this.
No setting but if you go to power saving mode, they will be disabled automatically. By disable, I mean no light.
Fix for this issue
Hi, the fix is described here (without power saving mode): http://forum.xda-developers.com/showpost.php?p=60009456&postcount=12
ATT User here, in settings Under Quick Settings, click Display and youll see Touch Key Light Duration
Touch key lights not working
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
CtrlAltDelete69 said:
ATT User here, in settings Under Quick Settings, click Display and youll see Touch Key Light Duration
Click to expand...
Click to collapse
Seems its not there for tmobile users.
Someone just posted a link to this in the galaxy s6(non-edge) forum:
https://play.google.com/store/apps/details?id=com.notquiteinsane.galaxybuttonlights
This app is doing the trick on my s6 edge
thanks
paddylaz said:
Someone just posted a link to this in the galaxy s6(non-edge) forum:
https://play.google.com/store/apps/details?id=com.notquiteinsane.galaxybuttonlights
Click to expand...
Click to collapse
Works for me thx:good:
Also the adb shell works as well so yeah pick one. Thx to the author of the adb shell commands
I need help! I have a T-Mobile S6 and like my touch light on while in power saving mode. Since this setting is somehow turned off on the galaxy s6 how can I turn it on without rooting the device. I tried the galaxy button lights app and once you turn on power saving mode it stops working.
This morning I started having an issue with my edge.
Whenever I touch the screen, both capacitive buttons light up. Causing for irregular behaviour when using the phone. Is there a screen calibration mode or should I return it for a new phone.
Mine does the same thing. I'm pretty sure that's standard.
Agreed. Sounds like normal behavior to me.
I fail to see how this is an issue?
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
Click to expand...
Click to collapse
That is not true.
The S5 cap lights also light up when you touch the screen. That is how it should work. It would ridiculous for it to NOT light up every time you interact with the phone (assuming you wanted them on at all).
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
Click to expand...
Click to collapse
They really don't use any noticable battery.
cpshoemake said:
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
Click to expand...
Click to collapse
If you enable power saving mode it turns them off FWIW.
Fix for this issue
Hi,
please check my reply in the S6 thread on the same issue: http://forum.xda-developers.com/showpost.php?p=60009456&postcount=12
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
Where are you finding the "Touch Key Light" settings? I don't seem to see them.
---------- Post added at 08:28 AM ---------- Previous post was at 08:27 AM ----------
mrnovanova said:
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
Click to expand...
Click to collapse
Yes, I am having the same issue. I thought it might be an app but I have removed all of them and it still happens. So annoying!! Even a reboot doesn't help.
Settings-Device-Display-Touch key light duration
Dr. Bamboozle said:
Settings-Device-Display-Touch key light duration
Click to expand...
Click to collapse
that option is NOT on the 925T
wase4711 said:
that option is NOT on the 925T
Click to expand...
Click to collapse
This is not on the SM-G925W8 version either.
Sometimes these buttons stop working all together and sometimes they both switch to become the task switcher button. The Back Key will no longer function to move you back a page! Very annoying. I am thinking the only fix might be a complete factory reset??
BTW, when this happens, something is loading in the background. Just before my buttons stop working, a get a very small vibration similar to when your device boots up. From that point forward the buttons don't work. It can last 1/2 hour or up to 2-3 hours before it clears itself up??
Update: I did a factory reset and it didn't do any good. There are literally thousands of posts on the web about this issue and no resolution. If you have this issue, I think you need to send your unit back.
I have a SAMSUNG-SM-G925A running stock AT&T Android 5.02
I dunno, received my Edge today and my capacitive buttons only light up when I click them.
I took my phone back today and Rogers very quickly gave me a replacement phone. Capacitive buttons working well on this one!!
Everything was working as expected and the two buttons (Back and running apps) stopped working, i made a factory rest and it did not help, I am suspecting the cover that have magnets in it and I removed it, shut down the phone for few minutes but it did not help, I will try extending the time it is shut down and see the results.
For those with button light issues try this app "Galaxy Button Lights". I'm not allowed to post external links here but you can find it in Google Play.
Listing some bugs and improvements
Bugs:
1. Screenshot does not cover entire screen area
2. No smooth transition for notifications
3. Auto brightness calibration is unstable
.
.
Improvements:
1. Enable hide notch option
2. Battery percentage in status bar
.
.
headsup notification lost animation compared to third party roms like RR,AICP,OMNI.
and the statusbar icons are too crowded
Swiping down the notification bar once doesn't have a smooth animation it really bugs me!
ynuance said:
and the statusbar icons are too crowded
Click to expand...
Click to collapse
I would rather say it is more advantage than shortcoming.
Battery percentage would be very pleasant. It's pretty much my only gripe about the phone so far.
when power button is pressed to lock the screen it first flashes red then turns off
similarly when brightness is reduced too quickly, screen has red tint and then brightness gets lowered
That must be your device. Mine has no such issues.
djinn_tyagi said:
when power button is pressed to lock the screen it first flashes red then turns off
similarly when brightness is reduced too quickly, screen has red tint and then brightness gets lowered
Click to expand...
Click to collapse
Is adaptive brightness or night light enabled?
djinn_tyagi said:
when power button is pressed to lock the screen it first flashes red then turns off
similarly when brightness is reduced too quickly, screen has red tint and then brightness gets lowered
Click to expand...
Click to collapse
It's supposed to be a turn off effect/animation, the screen goes off with that 3D-movie effect. It's not a bug.
Bookworm Yevgen said:
Is adaptive brightness or night light enabled?
Click to expand...
Click to collapse
Nah man, they both are disabled. i know that much that it's not the night light tint.
---------- Post added at 06:18 AM ---------- Previous post was at 06:15 AM ----------
SirPotatimus said:
It's supposed to be a turn off effect/animation, the screen goes off with that 3D-movie effect. It's not a bug.
Click to expand...
Click to collapse
If its supposed to be a feature, then why does it only shows red tint where the screen is white?
My uncle also has the same phone, i didn't notice this happening to his phone. Does it happen to you too?
djinn_tyagi said:
Nah man, they both are disabled. i know that much that it's not the night light tint.
---------- Post added at 06:18 AM ---------- Previous post was at 06:15 AM ----------
If its supposed to be a feature, then why does it only shows red tint where the screen is white?
My uncle also has the same phone, i didn't notice this happening to his phone. Does it happen to you too?
Click to expand...
Click to collapse
Can you share a screenshot? We might be talking about totally different things.. And about the effect I'm talking about, i can't like intentionally notice it if i look at screen going off very carefully but only notice it sometimes (like an offguard thing), it barely lasts 0.1 second before screen goes off!
SirPotatimus said:
Can you share a screenshot? We might be talking about totally different things.. And about the effect I'm talking about, i can't like intentionally notice it if i look at screen going off very carefully but only notice it sometimes (like an offguard thing), it barely lasts 0.1 second before screen goes off!
Click to expand...
Click to collapse
I think we're talking about the same thing if you say it lasts only a split second before screen going black, So i cant post a screenshot.
And the red flash only comes where the screen is on White UI, like when im in settings or google app. Where ever the the lcd is white, it flashes red just a fraction of a second before going off.
djinn_tyagi said:
I think we're talking about the same thing if you say it lasts only a split second before screen going black, So i cant post a screenshot.
And the red flash only comes where the screen is on White UI, like when im in settings or google app. Where ever the the lcd is white, it flashes red just a fraction of a second before going off.
Click to expand...
Click to collapse
It looks more like an intentional thing rather than a bug to me! I doesn't cause any problem.
https://photos.app.goo.gl/8PcPNnse2tmjsLZt8
SirPotatimus said:
It looks more like an intentional thing rather than a bug to me! I doesn't cause any problem.
Click to expand...
Click to collapse
Here's the link to the video of that red flash, i made the video in slow motion. I asked the online vendor to replace it, and even went to service centre, they both denied.
djinn_tyagi said:
https://photos.app.goo.gl/8PcPNnse2tmjsLZt8
Here's the link to the video of that red flash, i made the video in slow motion. I asked the online vendor to replace it, and even went to service centre, they both denied.
Click to expand...
Click to collapse
Oh that looks bad.. That's not the thing that happens with me, it's goes like the black shadows of fonts and icons go briefly red before going off, it's probably a bug in that feature for u..
SirPotatimus said:
Oh that looks bad.. That's not the thing that happens with me, it's goes like the black shadows of fonts and icons go briefly red before going off, it's probably a bug in that feature for u..
Click to expand...
Click to collapse
This is only when the screen is white, and this video is made in slow motion.
djinn_tyagi said:
This is only when the screen is white, and this video is made in slow motion.
Click to expand...
Click to collapse
Alright so just now i noticed that it happens to me too i don't know if its a bug at all!
SirPotatimus said:
Alright so just now i noticed that it happens to me too i don't know if its a bug at all!
Click to expand...
Click to collapse
just noticed another bug.
the option to switch off ambient display is greyed off for me, everytime the phone is on table its always on the ambient display without any movement.
I lock the phone and it comes to ambient display within 2 seconds.
Has anybody had any issues connecting Bluetooth devices? I have an Anker Soundbuds Slim+ BT headset - and the X6 just doesn't see them. I can pair them with my Fitbit Ionic in 3 seconds, but when I try to pair them with the phone, they're simply not detected?! I have connected different headsets without issue. These buds work on BT 4.1, so they should work with this phone, right?!
D'oh. Just noticed that it had previously paired - so was hiding in "previously connected devices". Never mind...
djinn_tyagi said:
just noticed another bug.
the option to switch off ambient display is greyed off for me, everytime the phone is on table its always on the ambient display without any movement.
I lock the phone and it comes to ambient display within 2 seconds.
Click to expand...
Click to collapse
See if u have ambient display turned to 'always during charging'.. And u can turn it off in the new notification setting inside ambient display.