Here is a link for a prerooted 5.0.2 stock ROM for D5833. It comes with NUT's xzdualrecovery 2.8.10.
https://mega.co.nz/#!hhMCyDIJ!tUaEG2NnULPcou8zlt2VT3o1WvfWDHQ3Q4Pz_j0cXCc
Excellent. Will download now.
Any chance of an FTF file version for those already using Lollipop without recovery installed?
I'm getting a bootloop after restoring.. before restoring I full wipe data, dalvik cache and cache... any ideas?
Carlos
Related
Hi guys im an xperia s LT26i user and i have an unlocked bootloader. Im currently running cm11 rom by raymanfx. The last time i tried to flash 4.1.2 rom i did NOT wipe system and i ended up getting a bootloop and soft brick. So if i am running cm11 and if i want to downgrade to 4.1.2 do i need to wipe system, data, cache and dalvik cache? cache and dalvik is a must but if i wipe system and data will it work?
You should make a full wipe probably everytime you switch your ROM. So:
- factory reset
- wipe dalvik cache
- format system
So your entire system is clear and if this don't work flash latest Stock ROM first and then the ROM you'ld like to run on your phone
lol98lol98 said:
You should make a full wipe probably everytime you switch your ROM. So:
- factory reset
- wipe dalvik cache
- format system
So your entire system is clear and if this don't work flash latest Stock ROM first and then the ROM you'ld like to run on your phone
Click to expand...
Click to collapse
Ok so i formatted my whole phone with the suggestions you gave and when i flashed the existenz rom by niaboc79 which is the stock rom it says "E:Error executing updater binary" and "Error flashing zip" and im on TWRP Recovery mod version 2.6.3.0
Ok i fixed it i just had to flash doomlord kernel which gets me back to cwm then flashing again fixed the problem. Thanks alot for your help though it did help me at some stages.
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh:
Hi guys, got a couple of issues flashing ROM's. I'll list what what steps i've taken so hopefully someone might be able to help out.
Sony Xperia Ultra Z C6833 / KitKat 4.4.4 / Build - 14.4.A.0. 108
1) Enable USB Debugging/Unknown sources then run Easy Root.
2) Backup TA Partition with Backup TA.
3) Run and install Dual Recovery.
(Please note that my Bootloader cannot be unlocked)
4) Try to install a ROM that doesn't require boot.img. Wipe data/cache/dalvik then install ROM. ROM seems to install fine, reboot to a black screen.
Then I have to restore with Sony PC Companion. I must be missing a step/doing something wrong and it's doing my head in. The stock Sony OS is O.K but the amount of useless bloat is unwarranted and I want to get rid.
Any help would be appreciated.
Did you make wipe data/factory reset? Wothout it olds rom data will stay and wont let rom boot
Run full wipe(system, data, cache, davilk cache)
Wait...
So your bl can't be unlocked? Can you still install rom (zip) from recovery? Wiping data, cache and dalvik? And then load the zip?
Hey, I am I'm bad need of getting away from a super laggy lollipop ROM I should never have installed on my poor 9100!
apologies in advance if there ae tonnes of threads on this but i did search and couldnt find relevant topics for 9100
Currently on cwm 6.0.5.1 and philz touch 6.8.5.9 for recovery/flashing zips etc.
I have never downgraded / flashed a ROM from lollipop back to kitkat so nervous of bricking my device.
When installing 4.4.4 kitkat rom can i boot into my formentioned recovery and follow the factory wipe and wipe davlik then flash the ROM zip, gapps zip, super su zip. wipe davlik and reboot??
Not sure if exiting lollipop ROM would Cause any issue doing it that way??
Thanks!
bakerlite said:
Hey, I am I'm bad need of getting away from a super laggy lollipop ROM I should never have installed on my poor 9100!
apologies in advance if there ae tonnes of threads on this but i did search and couldnt find relevant topics for 9100
Currently on cwm 6.0.5.1 and philz touch 6.8.5.9 for recovery/flashing zips etc.
I have never downgraded / flashed a ROM from lollipop back to kitkat so nervous of bricking my device.
When installing 4.4.4 kitkat rom can i boot into my formentioned recovery and follow the factory wipe and wipe davlik then flash the ROM zip, gapps zip, super su zip. wipe davlik and reboot??
Not sure if exiting lollipop ROM would Cause any issue doing it that way??
Thanks!
Click to expand...
Click to collapse
No its the same procedure, just full wipe, install kk rom, gapps, then I factory wipe for good measure, reboot.
That's great thanks for your help.
How to install RR Oreo latest version on my RN3.. I have unlocked bootloader and have twrp installed.. can anyone tell me step by step process.. I mean what to wipe.. backup.. install in twrp.. thanks in advance
Exactly like you'd install any ROM. Wipe system, data, cache, dalvik, flash latest firmware, flash ROM, flash GApps, reboot.