Hello
I have a phone Samsung Galaxy S 3
I do not know the type of problem
Phone can not connect to the computer
By Samsung Kies or Odin:crying:
Phone cable original
The emmc chip is corrupt or damaged. Search for the usual Odin connection issues. If you can get it to connect then try flashing the rescue firmware and pit, otherwise it's time for a new phone.
Related
Hi all, I think my galaxy is dead.
When I connect by odin, not detected when I connect as storage not detect it.
I formatted all thinking that would solve anything, but nothing has helped, still not detect it, and now I can not pass anything to the internal memory to flash any rom.
With my previous phone (Desire) something similar happened to me, USB break or something, but I could solve, but here I am lost, not to do to fix it.
I would appreciate any suggestions, I'm desperate.
USB connections ???
Replace Samsung drivers with new via Kies .
Or dead phone = service centre .
jje
Is there any way to eliminate recovery? I imagine that the SAT does not cover the warranty if I turn the phone appears to recovery ...
Uninstall and instal kies again
Check your odin version is it compatible
Flash stock rom and kernel
had the same problem now resolved
Sent from my GT-I9100 using Tapatalk
I have a s 2 i flashed a Lightening rom XWEK7 and it worked fine all day until a hour ago when my phone froze and restarted it self and now it wont recognize being plugged in it will go into download mode on the phone but still wont come up on the computer end. And is currently not going past the screen that says " Samsung Galaxy S 2 GT - 19100 and the yellow triangle at the bottom.
Need help ASAP as is my work phone.
The main thing is you can get into download mode. Get stock firmware from here if your carrier is listed, if not get country specific firmware here and flash that in Odin.
Edit - I just re-read your post & realised your PC won't recognise your phone. Uninstall/reinstall Kies so you have the drivers in place for Odin to recognise the phone (drivers might be corrupt ?). Make sure you kill off Kies in task manager before you attempt to flash stock firmware in Odin. If you find the PC still won't recognise your phone try a different USB cable/different USB ports (I know there's only one port on my laptop Odin works on), failing that try a different PC/different version of Windoze. And if all that doesn't work, you might want to try Heimdall. Search the forum, plenty of posts on how to use it (never used it myself so I can't guide you in the use of same).
http://forum.xda-developers.com/showthread.php?t=1449771
Follow this, and the phone will live again
Hi guys, I need some help with my Samsung Galaxy S3 GT-I9300.
A couple weeks ago my phone turned off by itself and never turned on completely again. If I turn it on, it stays on the very first boot screen forever (the white text saying Samsung Galaxy S3 GT-I9300, like this one (https://cdn-images.xda-developers.com/direct/1/1/5/2/1/9/8/I9300.bootlogo.jpg).
I've removed the SIM card and the MicroSD card with no effects whatsoever, and I've also left the device turned on for hours but it always stays on the same screen.
I cannot enter recovery mode (it just shows the boot screen mentioned above) but I can enter download mode. At download mode, I get this info:
ODIN MODE
Product name: GT-I9300
Custom binary download: No
Current binary: Samsung Official
System Status: Oficial
As you can see, I have never flashed a custom rom (or rooted or even unlocked the bootloader). This is what intrigues me the most, since everybody I've seen with the same problem had trouble during or after a flash.
My last OS version was 4.3.1 and it was received OTA months ago.
In the past few months, my device rebooted out of nowhere, even when I was not using it. Occasionally, it had the stuck power button, which caused it to reboot on a loop, but I always solved it by nudging the power button a little. I don't know if these two previous problems might have caused the problem I'm facing now, but they're not showing up anymore.
Anyway, I've tried to flash the newest official rom (NK1 - ZTO) via Odin but I always get a NAND Write error.
I've tried changing USB ports, USB cable and computers; tried Odin 3.04, 3.07 and 3.09; tried Samsung USB drivers v1.5.45 and 1.5.49 but nothing of the above made any difference.
Today things started getting worse, though. In the past, Windows would always recognize the device on at least one specific USB port; Odin would also recognize the device and then I would get the NAND Write error. Now, Windows will not recognize the device no matter the cable, USB port or driver version. I only get a unknown device error and Odin won't recognize anything connected.
I tested all my setup with a working Galaxy S3 I9300 and it got recognized every single time, no matter the USB port, the cable or the computer.
Considering that another device is getting recognized by different computers, I suppose that the problem lies in my Galaxy S3.
So, can anyone offer me any kind of advice or point me in any direction on how I can try to fix my phone? Is my phone physically dying and no software solution will unbrick it?
Your power button issue has corrupted/damaged the nand memory. Try the dead boot recovery thread in general forum but unless you have warranty you might be better off with a new phone.
I was afraid of that.
I checked the post you mentioned but it seems I'd have to buy tools and hardware more expensive than the phone itself, so I'd rather buy a new smartphone.
Thanks for the help!
Samsung Galaxy sg2 GT-I9100 download mode
Hi and please help fellow Samsung users
I have a Samsung Galaxy sg2 GT-I9100
One morning I woke up and my sg2 wouldn’t boot past the Samsung screen.
It won’t go to the recovery mode only download mode
I can only get to download mode
When I connect the phone by usb I get a blue sign in Odin It does show up in Odin in the coms
I have tried to flash it with Odin with 5 stock roms and Odin shows cache and fails every time.
I have removed all traces of kies and rebooted and the usb cable is also fine, I have also tried different versions of Odin to no avail
My question is what can or should I try next?
Please advise
I had this problem once. Couldn't success flashing via Odin even if the Odin was detecting my phone....was giving fail message........then as a last resort, more of frusrtatedly I pushed/shook the USB pin a little bit....voila! I got success.......flashed!!!!!!
Don't take it as final advise. Try , if all fails and you are sure what you are doing. Good luck.....
jamu08 said:
I had this problem once. Couldn't success flashing via Odin even if the Odin was detecting my phone....was giving fail message........then as a last resort, more of frusrtatedly I pushed/shook the USB pin a little bit....voila! I got success.......flashed!!!!!!
Don't take it as final advise. Try , if all fails and you are sure what you are doing. Good luck.....
Click to expand...
Click to collapse
That didn't work the USB cable is is working fine and when i try in on anther USB port it installs the Samsung drivers so it does recognize in Odin.
There must be something else i can do i know there is 4.5 to 5 GB of space in the phone memory
I have heard of using pit files as a last resort
I will give a reward to anyone by PayPal for a fix
Hi everyone,
I have an SII GT- I9100 that I installed a custom ROM on a while back (probably 2 years ago). After a while it got badly bricked I don't remember what happened, and not only that
the charging port was also messed up so I couldn't connect it to my pc (pc wouldn't recognize it unless I held the cable in with force, but even that didn't work after some time).
It's been sitting on a shelf for about a year and I decided to buy a new charging port, replace it, unbrick it and give it to my mom.
I did replace it and I can connect it to my pc now but there's still issues. On my main windows 10 pc it gives me an error "USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". (I've reinstalled usb drivers and troubleshooted with Kies).
I keep the phone in download mode while I am trying to connect it to my pc since I can't boot into anything (I have a yellow triangle and Samsung logo if I don't go into download mode).
On my laptop (win 7) I've managed to get windows to install all the drivers(even though it failed a couple times ?), I've also troubleshooted with Kies, still Kies can't connect to it.
I want to restore it to stock ROM but I haven't been successful. First Odin gave me "setup connection" error but then I rebooted the pc and it "worked".
Now it just says complete (write) operation failed.
I've tried 3 different Odin versions, nothing.
What bothers me is that Odin says "Added !" but everyone online to the people with similar issue says that they should reinstall drivers or talks about USB Debugging (which I can't turn on or off since it's bricked).
Sorry for the long post but what's the move here? Am I using a bad ROM ? I've tried one for the country I live in but not the country from which the phone is ( I don't know the country, might be Austria), could this be the issue ?
Thanks in advance!
Update, I may have found the right ROM, now it's stuck at boot.bin
EDIT: Found a youtube "solution" to that, then it got stuck at cache.img
EDIT: Getting Driver issues again, Unknown Device :/