Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Messed_sensation said:
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
es0tericcha0s said:
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
Click to expand...
Click to collapse
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Messed_sensation said:
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Click to expand...
Click to collapse
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Thank you for all your help and suggestion:good:. I am now running the Android Revolution HD.
This is a huge change from my iphone 4.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Messed_sensation said:
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Click to expand...
Click to collapse
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
es0tericcha0s said:
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
Click to expand...
Click to collapse
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Messed_sensation said:
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Click to expand...
Click to collapse
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
es0tericcha0s said:
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
Click to expand...
Click to collapse
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Messed_sensation said:
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Click to expand...
Click to collapse
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
es0tericcha0s said:
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
Click to expand...
Click to collapse
I think it is my battery. I picked up an Anker and the phone is now at 20% after 21hrs. Is there a way to get Emoji to work on my phone? When people SMS me, on the lock screen they show up as a question mark in a box but when i go to read the text message there is nothing there.
Using a different keyboard will let you send Emojis, but not really sure about enabling the view from other people's messages off the top of my head, sorry. I recommend SwiftKey for a great keyboard replacement with lots of built in Emojis.
Related
I have an HTC HD2 and I'm on T-mobile. What I've noticed is that my phone doesn't ring sometimes and then I'll just get a voicemail notification (if voicemail was left). It's an intermittent issue, I've tested it several times from another line.
Does anybody know what the issue is? I did a search on Google and there seems to be a lot of the same issues others are having across other networks and other versions of the HTC but, haven't found a solution.
Thanks
i had never heard of this issue until yesterday, when my phone simply did not ring, then i got a txt asking why i didnt answer. very confusing. only seemed to happen once. i have done a lot of tweaks, so maybe ive changed something i shouldnt have. if it helps im using a generic, unbraded, factory unlocked HD2, with CleanEX DsE 3.5 and radio 2.11. have you tried re-flashing the ROM and seeing if that helps?
interestingly, i have noticed that my signal can be irratic at times, often just dropping for no reason, then coming back about 30 seconds later. i live in a full signal area, so i know thats not a problem. also my data connection will 'freeze' at times, where it shows its connected, but nothing is able to use it, i have to disconnect and reconnect, and this may take 2 or 3 attempts before it connects and is usable. have you experienced the same issues?
matthewharmon102 said:
i had never heard of this issue until yesterday, when my phone simply did not ring, then i got a txt asking why i didnt answer. very confusing. only seemed to happen once. i have done a lot of tweaks, so maybe ive changed something i shouldnt have. if it helps im using a generic, unbraded, factory unlocked HD2, with CleanEX DsE 3.5 and radio 2.11. have you tried re-flashing the ROM and seeing if that helps?
interestingly, i have noticed that my signal can be irratic at times, often just dropping for no reason, then coming back about 30 seconds later. i live in a full signal area, so i know thats not a problem. also my data connection will 'freeze' at times, where it shows its connected, but nothing is able to use it, i have to disconnect and reconnect, and this may take 2 or 3 attempts before it connects and is usable. have you experienced the same issues?
Click to expand...
Click to collapse
I haven't tried flashing the ROM, I've been hesitant on doing that since I feel like I might mess something up. I'm not sure how to either. I have SPB backup, so I would hope if I messed something up then I would be able to easily restore it.
I haven't really noticed any dropping, my call qualities have been good. I've tried to dial a number before and it might drop right then while it's trying to make the call. So, I'll redial the number but, once I'm connected I haven't noticed any issues with calls dropping.
Data connection has been working pretty good as well, I've been using the wifi quite a bit and not really had any issues. I don't have a data plan setup with T-Mobile so I just use the wifi. I don't know if using the actual data connection would give different results than using the wifi.
flashing a rom is really easy it's all autoinstall, just have to read carefully / look at the video's, there A LOT of them out there.
HectiQ said:
flashing a rom is really easy it's all autoinstall, just have to read carefully / look at the video's, there A LOT of them out there.
Click to expand...
Click to collapse
updating the rom may help, as it will also update the radio drivers. what i would suggest, if you dont have much experience in flashing a ROM is to have a look on the official HTC support site. on there it will give you a list of updates avalible for your phone. download the latest ROM for your phone (for me, this is WWE 1.66 with radio 2.06) and install that. any data on an sd card will remain intacted, but sync you phone with outlook and backup stuff like contacts, messages etc before you do it. i personally use microsoft myphone to do all that.
flashing the ROM with an official one is very straight forward, and as quoted above, its all auto install on the phone, and there are about 3 or 4 steps that you need to do PC side (this is all explained in the update program you download). i would give that a go and see if things improve, you will also gain improved performance, new features and better battery life with newer ROMs, so its worth doing
custom roms are a bit more tricky to install, but often offer more features and improvements over stock roms. if you need help with this have a search on the forums, there are lots of guides and help on how to flash with a custom rom
matthewharmon102 said:
updating the rom may help, as it will also update the radio drivers. what i would suggest, if you dont have much experience in flashing a ROM is to have a look on the official HTC support site. on there it will give you a list of updates avalible for your phone. download the latest ROM for your phone (for me, this is WWE 1.66 with radio 2.06) and install that. any data on an sd card will remain intacted, but sync you phone with outlook and backup stuff like contacts, messages etc before you do it. i personally use microsoft myphone to do all that.
flashing the ROM with an official one is very straight forward, and as quoted above, its all auto install on the phone, and there are about 3 or 4 steps that you need to do PC side (this is all explained in the update program you download). i would give that a go and see if things improve, you will also gain improved performance, new features and better battery life with newer ROMs, so its worth doing
custom roms are a bit more tricky to install, but often offer more features and improvements over stock roms. if you need help with this have a search on the forums, there are lots of guides and help on how to flash with a custom rom
Click to expand...
Click to collapse
I have a T-Mobile HTC HD2 (U.S.) and I went to the HTC site and on the download page for the ROM update it has ROM Version: 1.66.707.1. When I check the ROM version on my phone it is: 2.10.531.1.1 (82076) WWE
Also it says on there - Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects.
So, I suppose I'll have to start looking into the custom ROM's.
ubaidabcd said:
I have a T-Mobile HTC HD2 (U.S.) and I went to the HTC site and on the download page for the ROM update it has ROM Version: 1.66.707.1. When I check the ROM version on my phone it is: 2.10.531.1.1 (82076) WWE
Also it says on there - Note: This update is not intended for use on T-Mobile(US) HTC HD2, and doing so may have undesired side effects.
So, I suppose I'll have to start looking into the custom ROM's.
Click to expand...
Click to collapse
good job you didnt flash that, the 'undesired side effect' of flashing that official rom (or any other non tmous official rom) on your tmous phone would have been a permanently dead phone.
im not sure about tmous roms, maybe have a look on the t-mobile us support site and see if anything is listed there. if you want to look at custom roms the first thing you will need to do is get hspl (the latest version is hspl3, which i believe is compatible with tmous). if you search on the forums you can find the official thread. this removes the security checks and allows you to install custom roms. after that you will need to choose a radio version. again search on the forum and find the latest one compatible with your hd2 (there is an official radio thread which i would look at). this normally comes with an updater program included, but if not, search for 'custom ruu' and follow the instructions on the thread. finally you need to pick a custom rom. there are literally 100s to choose from, with different features, looks, apps and even some android builds. personally, i use cleanex dse because of its speed and stability. im not sure if this is tmous compatible, so check on the rom threads.
alternativly, you could have a hardware fault with your phone, which will be repaired under warrenty, so you could go down this route. personally, i would do this first and see if things improve, as although custom roms can be uninstalled and the steps can be reversed, the warrenty is voided by using hspl and installing custom roms.
still have the problem? Might not need a hard reset. Try this solution here:
(LINK)
One of your programs might have deleted the "Volatile" folder, so
no Volatile folder => no WMPlayer => no MP3 playback => no ringtone.
Re-creating an empty "\Application Data\Volatile" folder usually brings it all back.
If it fixes the problem temporarily and recurs again, you might have to change the temp folder as outlined in the link above, or just install that CAB.
Hope this helps. If this solves your problem, please edit/add [solved] to your title.
atlaswing said:
still have the problem? Might not need a hard reset. Try this solution here:
(LINK)
One of your programs might have deleted the "Volatile" folder, so
no Volatile folder => no WMPlayer => no MP3 playback => no ringtone.
Re-creating an empty "\Application Data\Volatile" folder usually brings it all back.
If it fixes the problem temporarily and recurs again, you might have to change the temp folder as outlined in the link above, or just install that CAB.
Hope this helps. If this solves your problem, please edit/add [solved] to your title.
Click to expand...
Click to collapse
I did what u said and installed the cab but still the same problem. Doesn't ring sometimes
Plz if anyone had this problem and knows how to solve it, I'll be so thankful if you help me. It has been irritating me for a month :S
Same here...and its flooded in the net....still no solution..check this out and if anything comes to you...do pls let me know...
http://forum.xda-developers.com/showthread.php?t=850280
I have the same problem. Sometimes incoming call does't ring, altough the phone vibrates. I'm using an european HD2 with the original 1.48 rom. I didn't found the reason... the changed tweak... the influencing application installed. It seems happening randomly, I can get a call without incoming call ring and after a few minutes I can get a second call from the same caller with a normal ring.
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis
teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.
andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis
teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis
Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545
slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.
startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.
I currently have a lollipop rom version 5.1 (3.4.10-Nuk3rn3l) that has many quircks which make my DNA fairly unpleasant to use. I'd like to flash a build that is solidly reliable, even if it means downgrading.
What are my options? It is extremely daunting to wade through the endless posts of this development forum to find one that is stable.
What quirks are you having? Are you on the latest firmware and used the recommended recovery to flash? These HTC phones are very picky and can cause some undesired effects when flashing against recommendations of OP. I would assume you are running @santod040's GPE rom. His roms are pretty darn stable if installed correctly. If you did follow install procedure exactly as recommended and still have issues, try his nusense rom.
Yeah, I'd love to hear what instability issues("quirks") you might be having with my GPE port...I'm unaware of any.
Those who have issues and don't ask about them with logs or details, can't expect much.
You can always go back to a stock Kitkat Rom if the hard work of others isn't appreciated.
Sent from my HTC6525LVW using Tapatalk
santod040 said:
Yeah, I'd love to hear what instability issues("quirks") you might be having with my GPE port...I'm unaware of any.
Those who have issues and don't ask about them with logs or details, can't expect much.
You can always go back to a stock Kitkat Rom if the hard work of others isn't appreciated.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I appreciate all you do and it probably does have something to do with not having the most up to date software. I am experiencing a lot of little things that combine to be very frustrating in day to day use. In no particular order; I cannot send consecutive text messages without cycling airplane mode, the restart option when holding the power button has disappeared, every few days the phone will shut off and will be unable to be turned back on without plugging in a power cable (this has something to do with user input but I have yet to recognize the pattern that causes it), apps will frequently crash, the phone no longer automatically connects to wifi networks, and a few other things.
I don't know what info you would need, my kernel is 3.4.10-NuK3rn3l-dlx-GPE-Lollipop_v2.00 . Build number is LMY470.H6
I love that people are still developing for this phone, I just think a lot of this custom firmware business goes over my head.
Those issues sound like firmware outdated and some odd stuff that only an ruu can fix. Below is the most up to date ruu for this phone. Before you flash, be sure to back everything up to an external storage device (PC, USB otg, etc). After you ruu, flash the recommended recovery in the rom thread and then clean flash the rom (wipe data, cache, system). Do not restore the nandroid backup. It could be something software that is causing the app FCs.
http://forum.xda-developers.com/showthread.php?t=2935556
Edit: I know for a fact the Wi-Fi issue is because of outdated firmware, others might be wrong recovery, but to save the hassle, just ruu to be safe.
Do me a favor: Run "fastboot getvar all" and take a look at line three and six. I am having the exact same issues as you. My line 3 for baseband was version 1.02.01.0818, NOT the 1.02.01.0207 that the latest firmware thread stated it should be. My line 6 (version-main) was blank. After flashing the latest radio zip it now shows a 1.02.01.0207 for baseband and 4.09.605.1 for version-main. This isn't my main phone anymore so its not activated in a way that i can test it. However it may be a starting point for you. I'd be curious if you have the same radios that my phone did.
So my girlfriend's EVO 4G LTE is a bit of.. well, I'm gonna say bastard. I'm not new when it comes to rooting devices but I've never had to deal with one that fought me so much.
I've been through this adventure many times with it, and it gets more complicated each time. Here is what's happened with it so far.
It was stock, and it was terrible. It lagged so much, despite factory resets, that apps like google maps were completely unusable. It got no battery life AT ALL, and was generally freeze-happy and miserable.
So then I s-off'd it and after learning all its quirks, installed recovery and CM 11.2 (I think? It's been a year)
This worked great! For.. a few days. The phone worked, we went on vacation to a roaming area where Sprint had no coverage. We come back, and only the data works, texts and calls do not, and the phone acts like it's not activated. Yay. All attempts to get it activated are met with failure, much to the confusion of the poor sprint person on the line. The phone just will not take, at all. (damn lack of real sim cards..) We tried recovering back to a backup from twrp of the stock firmware but that won't work either? It wouldn't register with sprint even on the backed up version of stock sense. The phone seemed dead at this point. Bricked radio?
So we give up. We bring it to the sprint store, and they do some magic to it, and its back to stock, slow and terrible, but functional. We don't touch it until about three weeks ago.
But, my girlfriend is tired, again, of the terribleness, and asks me to try again. Okay, sure.
I install TWRP again, so far so good. The phone is still S-OFF from last time, which is nice. I go to install CM11.2 from the files used from last time (the MD5 does check out correct) But, the phone complains about not having a new enough bootloader. ???? (So I assume sprint downgraded the bootloader in the process of fixing it. somehow)
I forget the exact numbers, but we can't install CM11.2, only 10. or 10.whatever. the newest 10. Okay, fine. I gather a new set of cyanogen files, gapps, whatever, and flash all of that, so far so good.
This time it works, and stays working! Yay! So I thought.
As it turns out, its on a very old version of android (so old that it goes into a special usb file host mode when usb is plugged in) and more importantly, the camera is TERRIBLE. I've read that the evo 4g lte uses a special ImageSense chip to boost camera performance, and that cyanogen 10 does not support it. I can tell, because the camera is absolutely terrible. The battery life also is terrible, presumably because it lacks optimizations. It had way better battery life on CM11.2 when it worked. Other then that, its working just fine, but the camera is just unacceptable.
So, I want to know what to do from here. I see a few paths.
plan A:
update HBOOT to a newer version to allow the install of CM11.2
(how do I do that? I heard you have to use an RUU, but which RUU? I read that there is some touchscreen driver that is an issue depending on what version you run)
(Once I install the ruu is it business as usual, install twrp and then flash cyanogen like normal? Will it do the crazy not activation thing again? was that a fluke??)
plan B:
update HBOOT, but to a much newer one that allows the install of CM12 or whatever the newer ones are. Presumably updating past the touch screen driver issue and not allowing us to go back to an old version.
(once again, what do I need to do that? Is this advisable? I quite prefer the idea of running a newer version. So if this is the better idea, I will do it.)
I thank you greatly for your help. I'm not used to it being this complicated. I've read a lot of things about this phone and it seems very conflicting at times. I just want to get straightened out.
yeah, it's probably running like crap because the firmware is so out of date.
use this RUU http://forum.xda-developers.com/showthread.php?t=2653730
then re-flash twrp and another ROM if you want (i've been running cm12.1 for MONTHS) but she might be able to survive just like that. only fear would be staying vulnerable to security threats, but you've been living in that house this whole time anyway.
for a good while i was running this stock 4.3 with root and some xposed modules installed to get the cm functionality that i missed. but seriously, run the RUU, let it activate, then go under settings and update profile and PRL, fire up maps/navigation with GPS on so that it gets a good lock and its cache populated, then you should be good from there.
Thank you!
Can I use the same utility that I used to flash twrp (that one-click thing that seems to support a half million phones) or do I need something special? This sounds very easy to do. Almost too easy, given that the story of this phone's life is that the easiest thing I've ever done to it was take it completely apart to replace its battery.
never used the one-click stuff. flashing recovery via fastboot is simple enough.
get the adb tools, here's some easy instructions for that http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
get the latest twrp from here https://dl.twrp.me/jewel/
then follow these directions to flash twrp https://wiki.cyanogenmod.org/w/Install_CM_for_jewel#Installing_a_custom_recovery_using_fastboot
if not installing cm or any other rooted rom (you want to root stock) get supersu from here http://forum.xda-developers.com/showthread.php?t=1538053 and use the twrp installable zip
If you've gone through the trouble to S-Off, then fastboot flash the latest TWRP (3.0.2.0, I believe), which supports the new partition layout (extra 4gig of internal SD space).
From there, flash the official 651.4 developers version, go through the device setup which updates your PRL, then shut it down and reboot to TWRP and flash the latest CM12.1 and a proper gapps package (I use "stock", which is a bit much for some, but I like having everything available to me).
The one thing I do that most don't is to disable zRam and enable swap with my own script I wrote specifically for the external SD I formatted as vFat/ext4/swap.
After doing all this, I do not have the issues you seem to have, and the PRL seems to stay from the last install of stock Sense 5. Even with all the apps I have installed, it's still fairly snappy. Facebook/Messenger, and other memory hogging apps run smooth with no discernable lag, unless there's network issues.
YMMV, but look into using an app like "Ampre" to measure battery life and gauge if the battery is going bad or not.
Outside of that, there's not much left to do with these older devices that hasn't been done already.