[Q] Need Help in a bad way

[Q] Need Help in a bad way - Verizon LG G3

Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave

dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.

startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave

dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace

dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.

BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.

startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks

dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it

startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?

dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.

Related

Constant issues with rooted S4.

Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis

First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.

Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis

teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.

As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.

andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis

You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545

slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis

I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis

teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545

slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis

Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis

slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis

teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545

slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis

teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2

teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4

egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis

teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4

Back to stock to activate my sim card, how to....

Not sure which forum this should be in so i'm asking it here. Apparently, I can't activate my new sim card for the 4G unless i'm stock, unrooted, locked bootloader. I guess I jumped the gun after I got my phone, but before I got the sim card and rooted, unlocked, etc. I think I know the steps to take to get it back to compltely stock, but I want to make sure.
I think I need to run the script and relock the bootloader, then flash the stock RUU file.
Is that correct? Is that the correct order? Am I missing any steps?
Thanks a bunch for any speedy repsonses because i'm in a bind right now and have to get this resolved by morning.

flyinjoe13 said:
Not sure which forum this should be in so i'm asking it here. Apparently, I can't activate my new sim card for the 4G unless i'm stock, unrooted, locked bootloader. I guess I jumped the gun after I got my phone, but before I got the sim card and rooted, unlocked, etc. I think I know the steps to take to get it back to compltely stock, but I want to make sure.
I think I need to run the script and relock the bootloader, then flash the stock RUU file.
Is that correct? Is that the correct order? Am I missing any steps?
Thanks a bunch for any speedy repsonses because i'm in a bind right now and have to get this resolved by morning.
Click to expand...
Click to collapse
I'm pretty sure being unrooted is not a requirement. Just install this ROM and boot the phone with your SIM inserted. It should activate fine.

OK. I will try that because I am having a heck of a time getting activated on my CM rom. Even had a Verizon tech trying to help me for over an hour.
I see that ROM requires me to flash a new boot.img. When I rooted, the directions said to flash dirtyracuns Hboot. Will flashing this one effect anything? If I change ROMs, do I need to flash DR hboot again?
Thanks for the info...

flyinjoe13 said:
OK. I will try that because I am having a heck of a time getting activated on my CM rom. Even had a Verizon tech trying to help me for over an hour.
I see that ROM requires me to flash a new boot.img. When I rooted, the directions said to flash dirtyracuns Hboot. Will flashing this one effect anything? If I change ROMs, do I need to flash DR hboot again?
Thanks for the info...
Click to expand...
Click to collapse
Boot and HBoot are two very different things. Flashing different boot images will not affect your engineered hboot.
You definitely don't want to talk to vzw reps if you're running cm. The more tech support requests they get from users running non-official builds, the less likely they will be to ever allow phones with unlocked bootloaders on their system.

Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?

flyinjoe13 said:
Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?
Click to expand...
Click to collapse
LTE/CDMA should be fine

simlar problem
flyinjoe13 said:
Turns out my problem was from a borked radio. Being new to this, I didn't even know that could happen. Saw mention of it in another thread when I was just browsing around. Thought maybe that might be my problem so I followed the directions for fixing a borked radio and got connected right away. Boy this forum is helpful. Thank you.
BTW, what is the best network setting to use if I am in the US only, Global, LTE\CDMA or GSM\UMTS?
Click to expand...
Click to collapse
I am having a similar activation problem. What did you do to fix the radio? My problem started a few days ago.
I found the RUU for just the radio and applied it. No change. I get a LTE signal but the phone doesn't know it's own number and thinks it is roaming.

I followed the steps in this thread to restore my radio: http://forum.xda-developers.com/showthread.php?p=45476579#post45476579
Unfortunately, I never was able to get the radio to work with any of the CM based ROMs so I have ended up using a stock based ROM. ViperLTE. It is an excellent ROM and works great, but I got the phone recently so that I could run CM ROMs. Had I known I was going to have so many problems, I would have waited until February when my upgrade date came up and got one of the newer phones. I guess I still can, but I'd hate to waste the money I paid for this phone so soon.

sim issue
Turns out my SIM was actually bad. When you looked in the about, the SIM id number didn't show up. It had worked under 10.2 stable for several weeks before it stopped working. It had gotten worse over a week or so. At first a reboot would fix it. I did a clean flash of CM 11 at this point. After replacing the SIM the id number showed up but still couldn't make calls.
The problem went away after restoring a CM 10.2 back that had worked. I then did a dirty flash of CM 11 over it, with the kit kat gapps. It all worked out fine. I am speculating that a clean flash of CM 11, might not work.

[Q] Help with new to me Sensation 4G

Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.

Messed_sensation said:
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.

es0tericcha0s said:
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
Click to expand...
Click to collapse
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??

Messed_sensation said:
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Click to expand...
Click to collapse
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.

es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Thank you for all your help and suggestion:good:. I am now running the Android Revolution HD.
This is a huge change from my iphone 4.

es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.

Messed_sensation said:
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Click to expand...
Click to collapse
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?

es0tericcha0s said:
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
Click to expand...
Click to collapse
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.

Messed_sensation said:
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Click to expand...
Click to collapse
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:

es0tericcha0s said:
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
Click to expand...
Click to collapse
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.

Messed_sensation said:
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Click to expand...
Click to collapse
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.

es0tericcha0s said:
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
Click to expand...
Click to collapse
I think it is my battery. I picked up an Anker and the phone is now at 20% after 21hrs. Is there a way to get Emoji to work on my phone? When people SMS me, on the lock screen they show up as a question mark in a box but when i go to read the text message there is nothing there.

Using a different keyboard will let you send Emojis, but not really sure about enabling the view from other people's messages off the top of my head, sorry. I recommend SwiftKey for a great keyboard replacement with lots of built in Emojis.

Back to 4.4.4 from Lollipop

For anybody that wants to go back to 4.4.4 from 5.0 I can confirm it works great, I just flashed back with Odin. The 4.4.4 firmware is at sammobile right below the lollipop firmware. The 4.4.4 flash put it into a bootloop to which I then factory reset and it started up perfectly with none of the completely unusable issues I was having.
Bummed out that I can't use lollipop for the time being, but more than relieved that I have a usable phone again, I thought it was toast.Lollipop made my phone worthless, literally couldn't do anything, major bootloops and constant crashes.
I made another thread about it here
http://forum.xda-developers.com/verizon-galaxy-note-3/help/reboots-lollipop-t3090421

You should retry the upgrade, it's faster and more stable. You just had a corrupted file or something, if you really want the best is worth a try. It's 40% faster. There was just something wrong with your install.

Did you do a factory reset when you upgraded? A lot of Note 4 users who upgraded had similar issues which a factory reset corrected.

I took the upgrade and found it to be faster and more reliable as well. Still fingers crossed for a root exploit. At least we know if an exploit ever happens for 4.4.4 then we can downgrade to get it. Good to know!

Oh really? I thought we couldn't roll back after taking 5.0. I am having a hard time a stable host to download 4.4.4
Can someone help me out with this? <confused>

@ lost perfections:
Success! The 4.4.4 firmware took forever to download but worth it! Thank for this!

KruseLudsMobile said:
You should retry the upgrade, it's faster and more stable. You just had a corrupted file or something, if you really want the best is worth a try. It's 40% faster. There was just something wrong with your install.
Click to expand...
Click to collapse
Trust me I really wanted it and tried all the usual steps. I think something is wrong with my phones hardware that works mostly ok on this version. I actually stayed on an old version for a very long time, I rooted "root de la vega" and took one ota using the supersu option to keep root when using an ota. The next update after that would not work for me, I would have had to wipe and odin to update, so I held off thinking I wasn't missing anything. Till about a week or less after 4.4.4 came out then my phone started crashing the moment I received or made a call. I hadn't gotten any new apps or anything like that but just in case I factory reset to see if it fixed with no luck. So I finally upgraded via odin, no root now, but miraculously my phone could make calls again. I am giving you this essay because I have a feeling this issue is related. It seems it's my phones hardware that is messed up and i'm just lucky that 4.4.4 works at all. I still have issues every couple days where I make or receive a call and hear nothing, with a reboot needed to fix, that is confirmed still after a fresh install of 4.4.4 after all the 5.0 stuff I tried. Anyways thats why I think it's my phone. I wish I had an extended warranty so I could just update and make a claim.
As for everything I tried in the update, I took the ota, which was literally unusable by anybodys standard, I could use the phone for about 5-20ish seconds before it would crash, turning the sound to mute would help, but still crash at a couple minutes of use. I downloaded the firmware and flashed via Odin, same exact issues, changed nothing. Did several factory resets between all these steps. I kind of walked through the process on that thread I posted in the OP.
After making this thread I did try it one last time and flashed via odin, knowing that I had a workable fix, but same exact thing again. If they release another update I'll try then, but looks like I'm stuck till then at least.

Reilly1812 said:
Did you do a factory reset when you upgraded? A lot of Note 4 users who upgraded had similar issues which a factory reset corrected.
Click to expand...
Click to collapse
Yeah I did anything and everything I could, no luck. I think my phone itself is the problem.

sameog said:
@ lost perfections:
Success! The 4.4.4 firmware took forever to download but worth it! Thank for this!
Click to expand...
Click to collapse
Awesome, glad it helped. I'm SO glad they didn't block the ability to do this, I'd have been out a phone if they had.

LostPerfections said:
Awesome, glad it helped. I'm SO glad they didn't block the ability to do this, I'd have been out a phone if they had.
Click to expand...
Click to collapse
Can you be more specific? There are two firmware versions that are 4.4.4-NJ6 and NK1. I assume you used NK1? I'm a newb and sort of know how to use Odin/download mode. What version of Odin did you use?
I want to rollback to the previous build until they sort out the radio issues. My phone was fine on NK1 but on lollipop it drops LTE indoors frequently. Aside from the radio issue, lollipop runs great. I factory reset after the update, didn't make a difference.

YayNote said:
Can you be more specific? There are two firmware versions that are 4.4.4-NJ6 and NK1. I assume you used NK1? I'm a newb and sort of know how to use Odin/download mode. What version of Odin did you use?
I want to rollback to the previous build until they sort out the radio issues. My phone was fine on NK1 but on lollipop it drops LTE indoors frequently. Aside from the radio issue, lollipop runs great. I factory reset after the update, didn't make a difference.
Click to expand...
Click to collapse
You can use any radio with any rom. Just flash the modem file via flash app or Odin.

thornev said:
You can use any radio with any rom. Just flash the modem file via flash app or Odin.
Click to expand...
Click to collapse
Are you certain I can use a KitKat radio on lollipop? Verizon Note 3. If so, I'll do that right now.
Sent from my SM-N900V using XDA Free mobile app

YayNote said:
Are you certain I can use a KitKat radio on lollipop? Verizon Note 3. If so, I'll do that right now.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
I haven't done it, but I have mixed radios and roms before for example kitkat radio with JB rom.

Well, I'd still rather 4.4.4.. it's too bad. When I have strong LTE it's amazing. Did this speedtest today - kilobytes per sec. Incredible.
Sent from my SM-N900V using XDA Free mobile app

YayNote said:
Well, I'd still rather 4.4.4.. it's too bad. When I have strong LTE it's amazing. Did this speedtest today - kilobytes per sec. Incredible.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
No matter what....once you go to lollipop, you can NOT go back to any earlier version.
Sent from my Note 3 via Tapatalk

Doesn't the OP state that you can revert back?

YayNote said:
Can you be more specific? There are two firmware versions that are 4.4.4-NJ6 and NK1. I assume you used NK1? I'm a newb and sort of know how to use Odin/download mode. What version of Odin did you use?.
Click to expand...
Click to collapse
Yep. The OP did. Hell that's the title of the topic and there's two confirmed posters that did it successfully. I only wanted to know if they flashed NJ6 or NK1 and what build of Odin they used..

YayNote said:
Yep. The OP did. Hell that's the title of the topic and there's two confirmed posters that did it successfully. I only wanted to know if they flashed NJ6 or NK1 and what build of Odin they used..
Click to expand...
Click to collapse
Okay, to anyone whose interested: I used Odin 3.09 & NK1 (most current VZW build of 4.4.4) and it worked. Phone went into a bootloop, started recovery did a factory reset an it's back to normal.
Lollipop ran fine on my phone-probably because I reset it as soon as I updated...BUT, my data signal was halved. I get a weak LTE signal at work and by weak I mean 1 or 2 bars 105-115DB at best. Old brick building and I work in the basement. On lollipop, it wouldn't hold onto LTE anymore. It'd flip between 1x/3g..usually settling on 3G. Voice was unaffected. Hopefully they sort this out but this sort of signal performance (especially when it was fine on KK) is unacceptable.
Rolling back to NK1 has solved that. Thanks to the OP!

I can also confirm that flashing 4.4.4 NK1 from 5.0.0 OB6 works.
Tried it myself, but after I got done playing with it I went back to 5.0.0 OB6 afterwards.
I didn't look to see if it kept the 5.0.0 radio when downgrading to 4.4.4, but it kept the 5.0.0 boot loader.
I did not test the radio (as I didn't have a usable sim card at the time.)
Also, don't try to run URDLV on the 4.4.4 firmware before flashing, it will not boot (even with a factory reset.)
But I didn't try to flash a modified 4.4.4 firmware after 4.4.4 was already on there.

so just so I understand there's no root for 4.4.4 or 5.0 but it's possible to go back to 4.4.4 from 5.0 ?

Signal problems after upgrading from stock rooted 4.4.2 kk 12b to Jasmine 9.1

Ok, i'm fairly new to this stuff but have successfully rooted and modified several of my devices over the years. I've been attempting to upgrade my vs985 to as close to stock 5.1.1 as i can and after much reading decided on jasmine. I was rooted on kk 4.4.2 12b and I had no problems. the main reason i wanted to upgrade was for compatibility with my android play car stereo. I didn't have twrp so first i downloaded flashify and quickboot then flashed twrp from flashify. All good so far. Next I downloaded jasmine 9.0 and 9.1 or at least i thought lol. As it so happened i mistakenly ended up with one of the files being just the kernel for 5.1.1 35b. Must of been a long day cause I mistakenly failed to backup my current system and proceeded wipe data, cache, dalvik, and flashed the kernel file. As you might imagine it didn't turn out very good. I was stuck in boot loop. Fortunately I could still get into download mode so I was able to use the lg flash tool and I brought it all the way back to 10b stock firmware. Then i grabbed stump and rooted and flashed twrp again. at some point i noticed my cell signal was all over the place, up, down , no signal and it roamed almost constantly if there was any signal. I've had this phone and service for well over a year and never had anything like this at all. I knew it was something I did. I checked the back cover to be sure it was on properly and had good connection with the antenna and all checked out. I decided to go ahead and do the upgrade to jasmine 9.1 hoping this would correct the issue. Well no dice. I did create a backup this time and proceeded to wipe everything and flash 9.0 reboot then wipe nothing and flash 9.1, i guess as you call it "dirty" then reboot again. Here is a link to where i got the zips and instructions
http://forum.xda-developers.com/showpost.php?p=63305722&postcount=4842
in the instructions it says "RESET factory from within ROM (in Settings) - REQUIRED" . this step seemed strange as why would i do a factory reset on my device and erase everything i just did? would it not return it to original? I wasn't even sure if that was what he meant so i skipped that. After all was finished my signal was still all over the place could hardly make a call. it was bad. So once again I used lg flash tool and returned it to stock 4.4.2 10b, this time I wiped the data, cache, delvik and system. To my complete surprise the signal had not improved, in fact it could have actually been worse. As I said waaaaaay at the top of this post before i started all this i was running 4.4.2 12b, not sure how i ended up with 12b as i don't remember any upgrades after i downgraded to 10b and rooted. I froze the ota's with titanium backup but maybe 12b was pushed before i was able to freeze them. Anyway I couldn't figure out how to get 12b back now so I just flashed the 4.4.2 12b modem instead, This time I wiped cache and delvik before and after the flash then rebooted. This fixed my signal, everything seems normal now. no roaming and good signal. my software build however still shows 10b, but I guess thats correct since I only flashed the modem.
I really want 5.1.1 on my G3 but I need my signal too lol. can any one help me figure out how to get this done, can I flash the 12b modem on 5.1.1 this is where i got the file
http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641 it is way down the bottom of the page. Sorry for the extremely long post i just wanted to make sure i didn't leave any details out.
Any help would be greatly appreciated,
thanks in advance

@Allen227
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.

bweN diorD;4132606 [user=7106818 said:
@Allen227[/user]
i dont know if jasmine flashes the L modem when you flash it, but if it doesnt, that would be why you are having issues after flashing the rom.
other than that, i dont know what would cause modem issues.
Click to expand...
Click to collapse
@Allen227
TL;DR but yes, JasmineROM flashes the appropriate modem. v9.0 only flashes the 24B modem because it doesn't contain a fuller set of the necessary partitions to allow the 35B modem to work by simply replacing the 24B modem with the 35B one.
You can flash the 35B bootstack after flashing JasmineROM 9.0 and the 9.1 update, or SkyDragon 6.x, but you must not be on the 35B bootstack before flashing either UNLESS you also flash the 35B bootstack again after flashing the ROM.
For reasons why: http://forum.xda-developers.com/showthread.php?p=64064555
Edit: I meant to add, the 35B boostack contains the 35B modem and everything needed for it to work with JasmineROM 9.0/9.1.

Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..

tAheEr73 said:
Hi, anybody from bosses ,plz help, sorry for noob querry... using g3 stock rom 4.4.2 and want to upgrade to lollipop and find jasmine ROM most votes. rooted my device with king root and installed twrp 2.8.7.0 recovry. downloaded jasmin ROM9.0, back up my current rom.
can u please guide me steps,
have i too flash kernal before jasmine ROM? or my existing stock kernal will work fine with jasmine 9.1
placed downloaded ROM in my download folder in phone memory [not in sd Card] , when i would boot in recovry in wipe cache delvik etc will it erase this rom and phone data too???
what if something gone rom? in my g3 there is no option of adb , adb does not work on my g3 dont know why.....
if something gone wrong , can i recover phone?
please see attached pics for some clarification...
sorry for,long post, actualy want to be safe ,,, as i am new for these things ..
Click to expand...
Click to collapse
In the future, please do not post the same thing in two different threads. This is against XDA's forum rules. Also, no reason to hijack an only partially related thread. I answered you in the JasmineROM thread.

Sorry for rule breaking, actually i did not aware of that. will avoid surely next time and thanks for reply. hats off to you.

Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks

Allen227 said:
Thanks for your help guys. Last night I figured out my phone was allowing me to send and receive text messages and make outgoing calls but was completely unable to receive any calls. Signal still terribly inconsistent, it would be on 4g one minute then you could watch as it dropped then no service. There'd be no service for 3 or 4 minutes then it would repeat that cycle again. If I switch from global to cdma/let in settings it would immediately regain full signal. Then the cycle of it dropping out would start again. I got to looking through about phone in settings and realized my imei number was missing, all zeros. I'm assuming that probably is the root of my problems. Not sure what to do, I doubt Verizon can help. Phones not insured or under warranty anymore. I haven't researched this New development on te forums yet it got to late last night. If anyone knows of this problem I could use your help. Thanks
Click to expand...
Click to collapse
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!

roirraW "edor" ehT said:
If you go into the main Verizon G3 section or possibly the non-Verizon G3 section and use the search field to search for "IMEI" you'll probably find a helpful thread. I think it involves the QPST program on a Windows PC. You'll need the IMEI that it's supposed to have, so hopefully have that on the box or Verizon's website lists it.
Sometimes that's seemed to happen for some people when flashing TOTs, KDZs or ROMs. I've been lucky, it hasn't happened to me through all my flashing over the past year. Once you get it fixed, rooted and put TWRP on, you can back up the IMEI partition in TWRP. It's called something else in TWRP like EI or something - I forget.
Good luck!
Click to expand...
Click to collapse
Thanks again I will check that out now

Allen227 said:
Thanks again I will check that out now
Click to expand...
Click to collapse
I have spent sooooo many hours on this. The qpst apk wont see my phone I have done everything the tutorials suggest. the instructions are only applicable if there are no issues, in other words, in a perfect world. I'm sure its something stupid and very simple but I don't even have a place to start. First, its hard to believe this works on all OS's, but it doesn't state anywhere what it is and isn't compatible with. that info would be helpful. i have spent 4 hours a day for over a week trying to get this fixed and I'm no closer than i was when I started. Very frustrating. I'm still open to suggestions or any help that can be offered.

Better Mobile App

welcome