Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis
teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.
andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis
teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis
Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545
slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4
When I last rooted and ROM'd my GN2 it was shortly after the first OTA. I haven't touched it since then since it's been a great phone for me. I have been unhappy now for about a month with the performance and other issues. I have an issue that's requiring me to factory reset and since I will be basically losing everything anyway I want to update to the newest ROM.
Here's where I am now:
Android Version 4.1.1
Baseband Version I605VRALL4
Kernel Version 3.0.31-414933 [email protected] #1
Build Number JRO03C.I605VRALJB
Hardware Version I605.06
This is where I want to be: http://forum.xda-developers.com/showthread.php?t=2765021
I have the files downloaded and on my SDcard. I have the 4.3 MJ9 firmware ready to be flashed in Odin. But the post says I would only need that if I am coming from 4.1.2 (which I am not) so would that even be needed?
I can't seem to recall how can I tell if my bootloader is unlocked? I used the CASUAL root method originally. I have never had an issue with Root function so I know I am rooted still.
I have the PhilZ/CWM installed as my recovery.
I have a current backup to my sdcard.
Should I just flash as the thread says?
Thanks in advance and I've been at this for 5 hours now and in searching the forums for information about updating from 4.1.1 and there has been none. I've seen the "no posts found" page so many times I could throw my computer! haha!
Hey there,
Yeah you should have an unlocked bootloader since I used casual as well. Flash with Odin the firmware, they mention 4.1.2 because they assume everyone is already on that. You basically need the 4.3 firmware for all the new roms to ensure WiFi works specifically I believe while radios will still work.
So once you Odin you can flash the tw 4.4.2 ROM and expect it all to work. If you have been wanting to try stock aosp 4.4.4 now is a good time, they have gotten very stable since our phone has official cyanogen support.
Good luck
Yeah I followed a post from the thread that was a long process. I flashed 4.1.2 stock. Re-casual rooted. Then flashed 4.3 and the firmware. Then did the 4.4.2 radio and such. It was like a 4 hour process.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Well I had good luck yesterday but now seem to be having issues. And I can't screen shot so I don't know what to do.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Can you describe your issues the best you can?
Sent from my SCH-I605
When I plug in a headset or take out the S pen I get a consistent message about Pagebuddy closing. It won't stop popping up until I put the pen back or unplug the headset. I disabled pagebuddy in the settings hoping that would stop it. I cleared the cache and data from the app and also went into recovery and wiped cache. It was working fine for the first day. Then just started erroring.
Sounds like you have an app installed that's not playing nice. I would use Titanium Backup and freeze all user apps, then unfreeze one at a time to find the culprit
Sent from my SCH-I605
Today it stopped doing it. No messages for a headset plugged in or S-pen removed. I don't know what happened.
Verizon Note 2
Nebula 4.4.2
Hi,
I flashed kitkat 4.4.2 stock firmware today using Odin, After the mobile booted successfully the touch screen stopped working completely, also the option and back button stopped also, I tried reflashing multiple times the same thing.
I have replaced this screen and the digitizer 10 days ago after it crashed, it was working normally before upgrade.
What could be the problem.
Regards
Are you sure your using the right odin model?
Run in administration mode, and disable all virus pc programs.
Also, after flash reboot into stock recovery and data reset/ Wipe.
If that doesn't work the most likely you have a bad piece of hardware or something is unperfectivley seated. Try reconnecting the ribbon cables.
Reflash
Yes4g4me said:
Are you sure your using the right odin model?
Run in administration mode, and disable all virus pc programs.
Also, after flash reboot into stock recovery and data reset/ Wipe.
If that doesn't work the most likely you have a bad piece of hardware or something is unperfectivley seated. Try reconnecting the ribbon cables.
Click to expand...
Click to collapse
I did what you said, I tried reflashing with another jellybeans stock version but the same results, I took it to the mobile center where I changed the screen and he told me he can revert it to jellybeans.
I will tell you what he did when he finish.
samirkal said:
I did what you said, I tried reflashing with another jellybeans stock version but the same results, I took it to the mobile center where I changed the screen and he told me he can revert it to jellybeans.
I will tell you what he did when he finish.
Click to expand...
Click to collapse
It will be interesting to see how they could revert firmware from KK to JB... IMO this is impossible because of new bootloader in KK. Anyway let they make phone usable on ANY firmware.
Probably jigg it right?
Yes4g4me said:
Probably jigg it right?
Click to expand...
Click to collapse
It is unclear for now but there may be involved e-fuses technology - that means physically burning connections inside chip during firmware upgrade, so in that case it impossible to bring back previous state.
The main problem is why replaced screen doesn't work after flashing KK. I do not know what version of Mega do you have, but i red on this forum so some versions required exclusively Samsung original parts. People who changed screens by themself obtained i.e. from ebay had problems after upgrading to KK. Lets prove the source of parts in service where was replaced your screen.
EDIT// You can read about it here
http://forum.xda-developers.com/showthread.php?p=55189673
successfully downgraded
Successfully downgraded to jellybeans but didn't tell me how. He performed rooting and flashing which led to baseband loss, but then he returned the baseband, great.
Congratulations. Can you post sreenshot of the Informations about unit?
samirkal said:
Successfully downgraded to jellybeans but didn't tell me how. He performed rooting and flashing which led to baseband loss, but then he returned the baseband, great.
Click to expand...
Click to collapse
Which version do you own? i527?
Would love to know howbyou downgraded back to jb
Sent from my LG-LS980 using XDA Free mobile app
argggg
samirkal said:
Successfully downgraded to jellybeans but didn't tell me how. He performed rooting and flashing which led to baseband loss, but then he returned the baseband, great.
Click to expand...
Click to collapse
hi
my touch after ota does not vvork....
hovv you repair your baseband?
my basebandd is novv unknovvn !!
i9200
samirkal said:
Hi,
I flashed kitkat 4.4.2 stock firmware today using Odin, After the mobile booted successfully the touch screen stopped working completely, also the option and back button stopped also, I tried reflashing multiple times the same thing.
I have replaced this screen and the digitizer 10 days ago after it crashed, it was working normally before upgrade.
What could be the problem.
Regards
Click to expand...
Click to collapse
I have a samsung mobile, Galaxy Mega 6.3 (GT-I9200).
I updated my 4.2.2 android to 4.4.2 by OTA, last month in my Settings and About menu and Check for Update...
This update completed successfully, but after update my touch screen does not work at all, and I don't know what shall I do right now... my phone is completly unusable...
Solved.. Use this
http://forum.xda-developers.com/showthread.php?t=2922542
Useful information
Good deal glad you got your phone working again
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.
startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.
Hey all,
I downloaded and flashed MM this past week. I *did* root my phone using the latest supersu 2.74 from chainfire. Now, I am random reboots. I did use odin for the firmware flash.
I have a G900t1.
Thoughts?
Having exactly the same issue, phone will work fine for a day or two , them I will get as many as 5 reboots in a day....
sameog said:
Hey all,
I downloaded and flashed MM this past week. I *did* root my phone using the latest supersu 2.74 from chainfire. Now, I am random reboots. I did use odin for the firmware flash.
I have a G900t1.
Thoughts?
Click to expand...
Click to collapse
After all the random reboots, I downgraded back to kitkat because it's stable.
im wanting do go back to lolipop because i made a complete nandroid backup not entirely sure how to go about it, since ive switched to marshmallow my call quality and network connections have been crappy. like having make a call several times before it goes through with full LTE signal strength etc.
darthmalus said:
im wanting do go back to lolipop because i made a complete nandroid backup not entirely sure how to go about it, since ive switched to marshmallow my call quality and network connections have been crappy. like having make a call several times before it goes through with full LTE signal strength etc.
Click to expand...
Click to collapse
Just a thought.. double check your modem and boot loader are correct. But if your sure you want to go back, there is a couple threads with the roms, bl and modem for download.
http://forum.xda-developers.com/tmo.../compilation-s5-g900t-stock-firmware-t3042400
I've found this release very stable and solid.