When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
jinconstantine said:
When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Sounds like you've bricked it good. RMA it and ASUS should take care of it.
same problem here.
it happens when i tried to downgrade firmware using this guide.
http://www.asus-zenfone.com/2014/09/how-to-downgrade-from-442-kitkat-to-43-Jellybean-Zenfone.html
but i successfully downgraded it. and my phone can boot on home screen only when connected to a charger but it doesn't charging at all..
my only problem is when i try to press power and volume up. an empty battery appears with a question mark at the middle.
and my phone doesn't charge anymore.
did you try to flash stock firmare using adb?
hi there! just want to ask if zenfone 5 wont turn on, not charging, and it is not detected by pc with necessary drivers for the phone installed mean "unrepairable"?
Related
After a custom firmware update (openos) and a unsucefull shutdown (stuck).I cant go to recovery menu and not even screen lights up.Only the green power light turns on and if i hold the power button for 10 sec it turns off.Before i open it up or buy something else is their any solution or is it totally bricked.I have tried everything.I cant connect it to a pc to format the internal drive.For the moment i have the tablet "on" waiting to empty the battery.Thanks for any help.....
I have Honor 7 PLK-L01 , get proplem after when press on( power & + & -) button
When plugged in, it shows the battery starting to charge for about 5 seconds before it reboots to the same spot.
When not plugged in, it powers on by itself to the Honor logo for about 5 seconds before it reboots to that same spot.
Tried accessing fastboot mode by holding vol down and power but that didn't work.
Any advice would be appreciated.
:crying::crying:
Thank you.
Guys my Mi Pad 1 was running on Remix Rom based on shield blobs. Suddenly it hanged up upon reboot it only went into FASTBOOT, could never boot into bootloader. I did not have the time to fix it right away, now the situation is it does not boot up even to the fastboot screen. Only when connected to power outlet, first red led notifications blink then the Mi Logo comes up and then it goes into fastboot, but in the fastboot mode when connected to PC it does now show up.
Looking for some advice and help on how to fix this situation.
Get new USB cord and leave on charge hold power button down like 20 30 seconds plug it in while tapping power ..
Try holding volume down when off and plung in pc ..
I had bricked my Sony z ultra by accidently
deleting OS through TWRP. When phone is
connected to wall power socket led glows red
and Sony logo appears. Logo will go off when
power+vol up is pressed for few seconds but
Will appear within few seconds. When connected
to Computer phones led will bink red and there
Will be continuous connect disconnect sound
From computer speaker. Computer sees the phone
Just an usb input device or unrecognised.
Flashmode (power+vol down) also fails in
Flash tool application in which message says
Usb debbug is disabled and I can't enable it in
Bricked phone. Is there any chance to revive my
Phone?
Ravi Chandra P said:
I had bricked my Sony z ultra by accidently
deleting OS through TWRP. When phone is
connected to wall power socket led glows red
and Sony logo appears. Logo will go off when
power+vol up is pressed for few seconds but
Will appear within few seconds. When connected
to Computer phones led will bink red and there
Will be continuous connect disconnect sound
From computer speaker. Computer sees the phone
Just an usb input device or unrecognised.
Flashmode (power+vol down) also fails in
Flash tool application in which message says
Usb debbug is disabled and I can't enable it in
Bricked phone. Is there any chance to revive my
Phone?
Click to expand...
Click to collapse
You can reflash it with flashtool by holding little white dot right next to sd card for about a minute or two then press volume down and after that release white dot and connect cable to the phone while still holding vol down and the phone will be resurected.
Believe me I did it after a few months of bricking my device but still was left in my draw.
Cheers
Hello! I changed my screen ystd, and in the process somehow bricked my phone (?!)
Now my poco f1 won't turn on.. so i tried all the hard resets (vol+power) and nothing. When I charge it up with power brick or my pc, it boots into charging mode but nothing else. When i try booting it up it normally or fast boot or recovery again nothing happens, only charging logo. The charging logo stays on for about 3 second and then disappears. When I unplug the phone, it reappears for about a second and disappears;
I am on pixel experience (android 11 latest) . Also when i connect it to the pc the same issue happens (charging screen) and it shows in device manager as portable devices E:/ . It does not show in adb devices.
I found a thread with the same issue : https://forum.xda-developers.com/t/poco-f1-stuck-on-charging-logo.4031591/ , and someone commented that "Bootloader and recovery partition might have corrupted." What can I do about this? Is EDL flash the only option left? THanks!
in case anyone see this in the future, i was an idiot, while removing volume button and power button ribbon, i made a tear in it, the power button was simply unusable.
to boot it up, i pressed power up while connected to power source which launched into twrp