Hello! I changed my screen ystd, and in the process somehow bricked my phone (?!)
Now my poco f1 won't turn on.. so i tried all the hard resets (vol+power) and nothing. When I charge it up with power brick or my pc, it boots into charging mode but nothing else. When i try booting it up it normally or fast boot or recovery again nothing happens, only charging logo. The charging logo stays on for about 3 second and then disappears. When I unplug the phone, it reappears for about a second and disappears;
I am on pixel experience (android 11 latest) . Also when i connect it to the pc the same issue happens (charging screen) and it shows in device manager as portable devices E:/ . It does not show in adb devices.
I found a thread with the same issue : https://forum.xda-developers.com/t/poco-f1-stuck-on-charging-logo.4031591/ , and someone commented that "Bootloader and recovery partition might have corrupted." What can I do about this? Is EDL flash the only option left? THanks!
in case anyone see this in the future, i was an idiot, while removing volume button and power button ribbon, i made a tear in it, the power button was simply unusable.
to boot it up, i pressed power up while connected to power source which launched into twrp
Related
When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
jinconstantine said:
When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Sounds like you've bricked it good. RMA it and ASUS should take care of it.
same problem here.
it happens when i tried to downgrade firmware using this guide.
http://www.asus-zenfone.com/2014/09/how-to-downgrade-from-442-kitkat-to-43-Jellybean-Zenfone.html
but i successfully downgraded it. and my phone can boot on home screen only when connected to a charger but it doesn't charging at all..
my only problem is when i try to press power and volume up. an empty battery appears with a question mark at the middle.
and my phone doesn't charge anymore.
did you try to flash stock firmare using adb?
hi there! just want to ask if zenfone 5 wont turn on, not charging, and it is not detected by pc with necessary drivers for the phone installed mean "unrepairable"?
Hello XDA Community,
Sorry I didn't know where to post this...
Two weeks ago I purchased a Lenovo S8-50LC Tablet. It was working fine until last night, I was watching movies on Youtube and chatting with some friends. Then I went to bed and there was still around 50% charge in the battery.
When I woke up, I tired to wake up the device but it didn't respond. I thought it was stuck or something, so I tired to hold the power button for 20 seconds to do a hard reset but still didn't work. After that I plugged it in to a power source with the compatible charger that came with it and the screen light up with no data on it. I tried to power it on then and it showed the Lenovo logo and in a very tiny font underneath the logo it said "Boot Fail, Efi hard drive".
Then it would take me to a screen which says:
"EFI Shell version 2.31 [1.0]
Current running mode 1.1.2
map: Cannot find required map name.
Press ESC in 5 seconds to skip startup.nsh, any other key to continue.
Shell>_"
http://imageshack.com/a/img907/6979/reZJPf.jpg
and that's it!
I don't understand why this screen appears. I mean the tablet was working properly over the night and it had no issues whatsoever, but now it doesn't boot!
Then I tried to power it off and press Volume UP + Volume DOWN + Power Button, it showed a black screen with only one line: "FastBoot Starting...Can't get eMMC Info, revert to default value!"
http://imageshack.com/a/img661/1158/bRg9jj.jpg
That's all what I got...
PS:
1- The tablet does all that only when it's plugged to a power source, but when it's not plugged, it doesn't show anything.
2- When I plug it into the pc via USB, the pc doesn't recognize it.
3- I tried to boot into fastboot mode or recovery mode but it doesn't work either.
Please help me fix my tablet and I hope it's going to be soon. Thank you all in advance!
UPDATE:
1- I left it on the charger for maybe 2 hours and now it's turning on without being plugged in to a power source.
2- When I press Volume UP + Volume DOWN + Power Button, it shows the previous mentioned phrase, but now when I connect it to the pc via USB, windows recognizes it as Lenovo Composite ADB Interface under Android Phone
http://imageshack.com/a/img903/3907/oQdSAB.png
3- Tried to perform some fastboot commands like flash, format and erase, it always fails with the error:
Failed (remote: unknown command)
UPDATE2:
1- When executing ADB commands like adb devices it says "no devices found"
anyone?
Hello. A friend of mine has the same problem. He dropped the device and the screen cracked. After a reboot the tablet is on the same situation. I plugged a keyboard via otg , it stops the countdown in the EFI SHELL, but i can not type anything. I think is an eMMC related problem.
I guess the eMMC is totally fried or something. But, I mean, I didn't leave it on the charger all night or anything, why would it do such a thing!
any solutions or suggestions??
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
mrhamed said:
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
Click to expand...
Click to collapse
Thank you for your reply but it doesn't work .. as I mentioned earlier I don't have a "download mode" because any key combination I try to use just sends me to the shell window .. anymore suggestions would be appreciated!
-unplug usb cable
-turn off
-hold (volum+) and (volume -) towice
-press power button
It should go to fastboot quickly (a black screen with a little text)
Guys my Mi Pad 1 was running on Remix Rom based on shield blobs. Suddenly it hanged up upon reboot it only went into FASTBOOT, could never boot into bootloader. I did not have the time to fix it right away, now the situation is it does not boot up even to the fastboot screen. Only when connected to power outlet, first red led notifications blink then the Mi Logo comes up and then it goes into fastboot, but in the fastboot mode when connected to PC it does now show up.
Looking for some advice and help on how to fix this situation.
Get new USB cord and leave on charge hold power button down like 20 30 seconds plug it in while tapping power ..
Try holding volume down when off and plung in pc ..
sm-t870 unlocked/rooted stuck in bootloop
cannot enter recovery or download mode, or even seem to shut the tablet completely off.
any combination of buttons turns the tablet on with the message "bootloader is unlocked press power key to continue"
so holding power+volUP, must be let go to press power which seems to interrupt the button combination
power+volDOWN seems to shut the tablet off for 5 seconds but it automatically turns back on.
having plugged into laptop seems to make no difference.
help!
Hi man, have you fixed this issue? I'm having the exact same problems as yours. I updated my Magisk it just went bootloop.
Thanks!
Plug into PC then Power+Volume Up got me into recovery mode
I tried to root my phone by magisk.
After flashing a patched boot.img, it's failed to boot into system and I got a message that "the device need factory reset". I clicked yes and everything seems ok,I can boot into system. Then I tried to flash img again. So I boot into bootloader. Unfortunately, this time I got a black screen. The phone doesn't response me anymore.
I tried the software repair in xperia companion but It cannot dected my phone when I hold on volume down and plugged in it. I also tried hold on volume up + power but nothing happened. Hold on power key also no response. The led light always black, only become red when I connect it to my pc.
What should I so now and what's my phone's status? I searched something about 9008 mode and edl but I don't know how to check whether my phone is really turn into that status, my pc cannot dect my phone.
Have the same problem, only with the 5 iii instead. Still looking for a fix.
Try to switch the phone off; then just plug it into your PC without holding the Vol- key. It has happenned a couple of times with me that the phone does not want to boot up, with attempts to get it into FLASH mode by holding the key down throwing more confusion into the mix.
I think there is a low battery protection. Make sure the phone is charged up. Keeps the device from death during a flash.
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Evil_Sephiroth said:
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Click to expand...
Click to collapse
It might require experimenting with service modes and different chargers. I had an early Xperia 1 III that bootlooped while charging after setting up the fingerprint reader. It seems that charging is disabled during booting. It has to finish or enter a service/fault mode.
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
tomatoketchup said:
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
Click to expand...
Click to collapse
I feel sorry for you brother...such a nice device...OK let's talk what happened, the state now your device is in is called hardbrick and it had a corrupted bootloader or no boot loader, but your device is still alive, in your PC in device manager it lists as Qs USB mode with some number after it like qsusb9008...now this device can only be brought to life with the help of a blankflash file which can flash your boot loader in snapdragon service mode...actually no snapdragon can be hardbricked permanently now you need appropriate blankflash file for your device.. Please don't open the device if some repairmen suggests to do JTAG nothing is necessary all you need is blankflash file which is shared to only Sony testers groups.... Who tests ROMs before release and they hardbrick so they share those files to them.... Please don't loose hope....it takes time but certainly it can be bought back to life... And dont try any flashing utility as there is no functional boot loader on it now and nothing will work...Sony won't provide that for sure and they will say then can only solve by mother board replacement ,don't believe therm your device is perfect it only needs blankflash file as it entered into final safe mode... I ain't regular on XDA if you need any info contact me via my mail [email protected] g ma I'll .com
Have any of you tried this - https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
ok in my case it was the charging IC