While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
AlamX said:
While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Click to expand...
Click to collapse
Most likely, the system partition is corrupt due to the update being interrupted unexpectedly. The data partition is probably still intact as long as you don't wipe it.
I'm not familiar with your device, but I would suggest checking if you can boot into fastboot mode and attempt to flash a stock image for your phone. It's possible that the update you downloaded can be extracted, allowing you to flash the system image from the update directly to your phone (e.g. fastboot flash system system.img). Good luck.
Related
Hi,
I flashed phone from cyanongen v15
After installation was complete i rebooted.
Device was vibrating and boot screen was displayed.
The device wont upload the phone and is stuck in a boot loop.
After a few tries in boot loop the display is freezing and nothing happens.
While rebooting (Manually), i discovered i cant run Xrecovery and
i am not getting any thing other then sony ericsson first screen
now i cant seem to find a solution. i would much appreciate any help at all!!
mikulgohil said:
Hi,
I flashed phone from cyanongen v15
After installation was complete i rebooted.
Device was vibrating and boot screen was displayed.
The device wont upload the phone and is stuck in a boot loop.
After a few tries in boot loop the display is freezing and nothing happens.
While rebooting (Manually), i discovered i cant run Xrecovery and
i am not getting any thing other then sony ericsson first screen
now i cant seem to find a solution. i would much appreciate any help at all!!
Click to expand...
Click to collapse
Flash your phone with SEUS (Download Sony Ericsson Update Service) from sonyericsson.com and then re-install root+recovery and try another =)
still not working
hi,
i tryed to do but
see the attachment it is telling to drag the status bar and click on mount
i have connected with USB , SEPC show it is detected it show the error attached
but my phone don't reach to UI level it is stucked at "Sony ericsson" screen in booting
mikulgohil said:
hi,
i tryed to do but
see the attachment it is telling to drag the status bar and click on mount
i have connected with USB , SEPC show it is detected it show the error attached
but my phone don't reach to UI level it is stucked at "Sony ericsson" screen in booting
Click to expand...
Click to collapse
I think from what I have found on the forum and google that seus (i knw this stands for sony e update service but it dosnt seem to be the same as SE pc companion and thats whats in your screen shot. So may be thats why you cant use it. I cant find this seus any were to download on the net.
Sent from my U20i using xda premium
try this:
start seus on pc
connect phone and pc with usb cable
press both middle and right buttons at the same time and press the power button
when phone goes down, keep pressing only the right button
thanks
Thanks both my phone is working fine now
the thing was that i was unknown with REPAIR like will it show when i fail to connect to USB
once again thanks a lot
Screen goes black after updating to .62.Its even black when I reboot it but after boot it gets on for some time.Anyone know how to fix it?
phones shows black screen for sometime after updating and takes a little bit of more time to boot for the first start after update.
If u are having this problem multiple times then what u can do is connect ur phone to pc and start update using PC Companion not SEUS. if there will be problem with the software the pc companion will show "Repair" link. Just click on that and ur phone will get updated.
Rply after doing this.
Lets wat else can we do...
Good Luck...
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA
Hi All,
I woke up in the morning to check the time and found the screen off. (Which was ok just ten min before when alarm was buzzing.). I was confused why the device power button was not responding which was ok ten mins ago.
I tried restart it by long pressing power button. And was happy to see the normal boot and lock screen. I opened the lock screen and in the notification appeared "Preparing USB, checking for errors.", and then in about 10 seconds, the phone got frozen. I restarted many times by removing external SD, sim , etc but no use. Tried even connecting to PC, but didnt even detect.
Frustrated and then went to recovery mode (vol up+power+home) and "deleted cache data" . And checked , but no use. Now I have tried to factory reset from recovery mode (vol up+power+home). Now the android symbol appeared and then on the " Installing applications " screen, the device gets struck.
I went to Samsung service center, those guys informed it might be software prob and installed afresh, but no use the same happens. the service guy says software loading passed successfully but bo use. Screen stops at the same point " Installing applications " .
The service center guy says that my motherboard is gone...
Unfortunately just completed by warranty period also...
Any help anybody....:crying:
(Its was having ICS 4.0.4 of middle east version before this damage. I have not done any sort of tampering in terms of software or any external damages or drop down...)..pls guide...never even tried rooting stuff.. It was quite strange for me, with such a baby care, its gone forever...:crying:
maka11 said:
Hi All,
I woke up in the morning to check the time and found the screen off. (Which was ok just ten min before when alarm was buzzing.). I was confused why the device power button was not responding which was ok ten mins ago.
I tried restart it by long pressing power button. And was happy to see the normal boot and lock screen. I opened the lock screen and in the notification appeared "Preparing USB, checking for errors.", and then in about 10 seconds, the phone got frozen. I restarted many times by removing external SD, sim , etc but no use. Tried even connecting to PC, but didnt even detect.
Frustrated and then went to recovery mode (vol up+power+home) and "deleted cache data" . And checked , but no use. Now I have tried to factory reset from recovery mode (vol up+power+home). Now the android symbol appeared and then on the " Installing applications " screen, the device gets struck.
I went to Samsung service center, those guys informed it might be software prob and installed afresh, but no use the same happens. the service guy says software loading passed successfully but bo use. Screen stops at the same point " Installing applications " .
The service center guy says that my motherboard is gone...
Unfortunately just completed by warranty period also...
Any help anybody....:crying:
(Its was having ICS 4.0.4 of middle east version before this damage. I have not done any sort of tampering in terms of software or any external damages or drop down...)..pls guide...never even tried rooting stuff.. It was quite strange for me, with such a baby care, its gone forever...:crying:
Click to expand...
Click to collapse
The Worst thing to do on an android phone running Stock Android 4.0.4 firmware is doing a 'Wipe Data/Factory reset' on its Stock recovery ma8
as the stock kernel that comes with the same is plagued with the infamous ' Brick Bug'
I dunno how u missed this 'Sticky' link below for the same
http://forum.xda-developers.com/showthread.php?t=1756242
If ur phone is responding for now then still u have a chance to revive the same, go thro the link above and see for some possible solutions
Sun90 said:
The Worst thing to do on an android phone running Stock Android 4.0.4 firmware is doing a 'Wipe Data/Factory reset' on its Stock recovery ma8
as the stock kernel that comes with the same is plagued with the infamous ' Brick Bug'
I dunno how u missed this 'Sticky' link below for the same
http://forum.xda-developers.com/showthread.php?t=1756242
If ur phone is responding for now then still u have a chance to revive the same, go thro the link above and see for some possible solutions
Click to expand...
Click to collapse
Thank you for your reply. Informed your suggestions to service center also.
The service center guy has informed that by doing some experiments, he could recover the phone, except one problem. That is the media scanning never ends and the galary doesnt open.
Any suggestions.
Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .